Ubuntu Manpage: dispatch_source_create

Provided by: libdispatch-dev_0~svn197-3.1ubuntu1_amd64

NAME

     dispatch_source_create — dispatch event sources

SYNOPSIS

     #include <dispatch/dispatch.h>

     dispatch_source_t
     dispatch_source_create(dispatch_source_type_t type, uintptr_t handle, unsigned long mask,
         dispatch_queue_t queue);

     void
     dispatch_source_set_event_handler(dispatch_source_t source, void (^block)(void));

     void
     dispatch_source_set_event_handler_f(dispatch_source_t source, void (*function)(void *));

     void
     dispatch_source_set_cancel_handler(dispatch_source_t source, void (^block)(void));

     void
     dispatch_source_set_cancel_handler_f(dispatch_source_t source, void (*function)(void *));

     void
     dispatch_source_cancel(dispatch_source_t source);

     void
     dispatch_source_testcancel(dispatch_source_t source);

     uintptr_t
     dispatch_source_get_handle(dispatch_source_t source);

     unsigned long
     dispatch_source_get_mask(dispatch_source_t source);

     unsigned long
     dispatch_source_get_data(dispatch_source_t source);

     void
     dispatch_source_merge_data(dispatch_source_t source, unsigned long data);

     void
     dispatch_source_set_timer(dispatch_source_t source, dispatch_time_t start, uint64_t interval,
         uint64_t leeway);

DESCRIPTION

     Dispatch event sources may be used to monitor a variety of system objects and events including file
     descriptors, mach ports, processes, virtual filesystem nodes, signal delivery and timers.

     When a state change occurs, the dispatch source will submit its event handler block to its target queue.

     The dispatch_source_create() function creates a new dispatch source object that may be retained and
     released with calls to dispatch_retain() and dispatch_release() respectively. Newly created sources are
     created in a suspended state. After the source has been configured by setting an event handler,
     cancellation handler, context, etc., the source must be activated by a call to dispatch_resume() before any
     events will be delivered.

     Dispatch sources may be one of the following types:
           •   DISPATCH_SOURCE_TYPE_DATA_ADD
           •   DISPATCH_SOURCE_TYPE_DATA_OR
           •   DISPATCH_SOURCE_TYPE_MACH_SEND
           •   DISPATCH_SOURCE_TYPE_MACH_RECV
           •   DISPATCH_SOURCE_TYPE_PROC
           •   DISPATCH_SOURCE_TYPE_READ
           •   DISPATCH_SOURCE_TYPE_SIGNAL
           •   DISPATCH_SOURCE_TYPE_TIMER
           •   DISPATCH_SOURCE_TYPE_VNODE
           •   DISPATCH_SOURCE_TYPE_WRITE

     The handle and mask arguments to dispatch_source_create() and the return values of the
     dispatch_source_get_handle(), dispatch_source_get_mask(), and dispatch_source_get_data() functions should
     be interpreted according to the type of the dispatch source.

     The dispatch_source_get_handle() function returns the underlying handle to the dispatch source (i.e. file
     descriptor, mach port, process identifer, etc.). The result of this function may be cast directly to the
     underlying type.

     The dispatch_source_get_mask() function returns the set of flags that were specified at source creation
     time via the mask argument.

     The dispatch_source_get_data() function returns the currently pending data for the dispatch source.  This
     function should only be called from within the source's event handler.  The result of calling this function
     from any other context is undefined.

     The dispatch_source_merge_data() function is intended for use with the DISPATCH_SOURCE_TYPE_DATA_ADD and
     DISPATCH_SOURCE_TYPE_DATA_OR source types. The result of using this function with any other source type is
     undefined. Calling this function will atomically add or logical OR the data into the source's data, and
     trigger the delivery of the source's event handler.

SOURCE EVENT HANDLERS

     In order to receive events from the dispatch source, an event handler should be specified via
     dispatch_source_set_event_handler().  The event handler block is submitted to the source's target queue
     when the state of the underlying system handle changes, or when an event occurs.

     Dispatch sources may be suspended or resumed independently of their target queues using dispatch_suspend()
     and dispatch_resume() on the dispatch source directly. The data describing events which occur while a
     source is suspended are coalesced and delivered once the source is resumed.

     The handler block need not be reentrant safe, as it is not resubmitted to the target queue until any prior
     invocation for that dispatch source has completed.  When the handler is set, the dispatch source will
     perform a Block_copy() on the handler block.

CANCELLATION

     The dispatch_source_cancel() function asynchronously cancels the dispatch source, preventing any further
     invocation of its event handler block. Cancellation does not interrupt a currently executing handler block
     (non-preemptive).

     The dispatch_source_testcancel() function may be used to determine whether the specified source has been
     canceled. A non-zero value will be returned if the source is canceled.

     When a dispatch source is canceled its optional cancellation handler will be submitted to its target queue.
     The cancellation handler may be specified via dispatch_source_set_cancel_handler().  This cancellation
     handler is invoked only once, and only as a direct consequence of calling dispatch_source_cancel().

     Important: a cancellation handler is required for file descriptor and mach port based sources in order to
     safely close the descriptor or destroy the port. Closing the descriptor or port before the cancellation
     handler has run may result in a race condition: if a new descriptor is allocated with the same value as the
     recently closed descriptor while the source's event handler is still running, the event handler may
     read/write data to the wrong descriptor.

DISPATCH SOURCE TYPES

The following section contains a summary of supported dispatch event types and the interpretation of their
parameters and returned data.

DISPATCH_SOURCE_TYPE_DATA_ADD, DISPATCH_SOURCE_TYPE_DATA_OR

Sources of this type allow applications to manually trigger the source's event handler via a call to
dispatch_source_merge_data(). The data will be merged with the source's pending data via an atomic add or
logic OR (based on the source's type), and the event handler block will be submitted to the source's target
queue. The data is application defined. These sources have no handle or mask and zero should be used.

DISPATCH_SOURCE_TYPE_MACH_SEND

Sources of this type monitor a mach port with a send right for state changes. The handle is the mach port
(mach_port_t) to monitor and the mask may be:
• DISPATCH_MACH_SEND_DEAD
The port's corresponding receive right has been destroyed

The data returned by dispatch_source_get_data() indicates which of the events in the mask were observed.

DISPATCH_SOURCE_TYPE_MACH_RECV

Sources of this type monitor a mach port with a receive right for state changes. The handle is the mach
port (mach_port_t) to monitor and the mask is unused and should be zero. The event handler block will be
submitted to the target queue when a message on the mach port is waiting to be received.

DISPATCH_SOURCE_TYPE_PROC

Sources of this type monitor processes for state changes. The handle is the process identifier (pid_t) of
the process to monitor and the mask may be one or more of the following:
• DISPATCH_PROC_EXIT The process has exited and is available to wait(2).
• DISPATCH_PROC_FORK The process has created one or more child processes.
• DISPATCH_PROC_EXEC The process has become another executable image via a call to execve(2) or
posix_spawn(2).
• DISPATCH_PROC_REAP The process status has been collected by its parent process via wait(2).
• DISPATCH_PROC_SIGNAL A signal was delivered to the process.

The data returned by dispatch_source_get_data() indicates which of the events in the mask were observed.

DISPATCH_SOURCE_TYPE_READ

Sources of this type monitor file descriptors for pending data. The handle is the file descriptor (int) to
monitor and the mask is unused and should be zero.

The data returned by dispatch_source_get_data() is an estimated number of bytes available to be read from
the descriptor. This estimate should be treated as a suggested minimum read buffer size. There are no
guarantees that a complete read of this size will be performed.

Users of this source type are strongly encouraged to perform non-blocking I/O and handle any truncated
reads or error conditions that may occur. See fcntl(2) for additional information about setting the
O_NONBLOCK flag on a file descriptor.

DISPATCH_SOURCE_TYPE_SIGNAL

Sources of this type monitor signals delivered to the current process. The handle is the signal number to
monitor (int) and the mask is unused and should be zero.

The data returned by dispatch_source_get_data() is the number of signals received since the last invocation
of the event handler block.

Unlike signal handlers specified via sigaction(), the execution of the event handler block does not
interrupt the current thread of execution; therefore the handler block is not limited to the use of signal
safe interfaces defined in sigaction(2). Furthermore, multiple observers of a given signal are supported;
thus allowing applications and libraries to cooperate safely. However, a dispatch source does not install a
signal handler or otherwise alter the behavior of signal delivery. Therefore, applications must ignore or
at least catch any signal that terminates a process by default. For example, near the top of main():

signal(SIGTERM, SIG_IGN);

DISPATCH_SOURCE_TYPE_TIMER

Sources of this type periodically submit the event handler block to the target queue on an interval
specified by dispatch_source_set_timer(). The handle and mask arguments are unused and should be zero.

A best effort attempt is made to submit the event handler block to the target queue at the specified time;
however, actual invocation may occur at a later time.

The data returned by dispatch_source_get_data() is the number of times the timer has fired since the last
invocation of the event handler block.

The function dispatch_source_set_timer() takes as an argument the start time of the timer (initial fire
time) represented as a dispatch_time_t. The timer dispatch source will use the same clock as the function
used to create this value. (See dispatch_time(3) for more information.) The interval, in nanoseconds,
specifies the period at which the timer should repeat. All timers will repeat indefinitely until
dispatch_source_cancel() is called. The leeway, in nanoseconds, is a hint to the system that it may defer
the timer in order to align with other system activity for improved system performance or reduced power
consumption. (For example, an application might perform a periodic task every 5 minutes with a leeway of up
to 30 seconds.) Note that some latency is to be expected for all timers even when a value of zero is used.

Note: Under the C language, untyped numbers default to the int type. This can lead to truncation bugs when
arithmetic operations with other numbers are expected to generate a uint64_t sized result. When in doubt,
use ull as a suffix. For example:

3ull * NSEC_PER_SEC

DISPATCH_SOURCE_TYPE_VNODE

Sources of this type monitor the virtual filesystem nodes for state changes. The handle is a file
descriptor (int) referencing the node to monitor, and the mask may be one or more of the following:
• DISPATCH_VNODE_DELETE The referenced node was removed from the filesystem namespace via unlink(2).
• DISPATCH_VNODE_WRITE A write to the referenced file occurred
• DISPATCH_VNODE_EXTEND The referenced file was extended
• DISPATCH_VNODE_ATTRIB The metadata attributes of the referenced node have changed
• DISPATCH_VNODE_LINK The link count on the referenced node has changed
• DISPATCH_VNODE_RENAME The referenced node was renamed
• DISPATCH_VNODE_REVOKE Access to the referenced node was revoked via revoke(2) or the underlying
fileystem was unmounted.

The data returned by dispatch_source_get_data() indicates which of the events in the mask were observed.

DISPATCH_SOURCE_TYPE_WRITE

Sources of this type monitor file descriptors for available write buffer space. The handle is the file
descriptor (int) to monitor and the mask is unused and should be zero.

NAME

SYNOPSIS

DESCRIPTION

SOURCE EVENT HANDLERS

CANCELLATION

DISPATCH SOURCE TYPES

SEE ALSO