Provided by: tcllib_1.15-dfsg-2_all 
NAME
doctools_lang_intro - doctools language introduction
DESCRIPTION
This document is an informal introduction to version 1 of the doctools markup language
based on a multitude of examples. After reading this a writer should be ready to
understand the two parts of the formal specification, i.e. the doctools language syntax
specification and the doctools language command reference.
FUNDAMENTALS
In the broadest terms possible the doctools markup language is LaTeX-like, instead of like
SGML and similar languages. A document written in this language consists primarily of
text, with markup commands embedded into it.
Each markup command is a Tcl command surrounded by a matching pair of [ and ]. Inside of
these delimiters the usual rules for a Tcl command apply with regard to word quotation,
nested commands, continuation lines, etc. I.e.
[arg bar]] ...
BASIC STRUCTURE
The most simple document which can be written in doctools is
[manpage_begin NAME SECTION VERSION]
[description]
[manpage_end]
This also shows us that all doctools documents are split into two parts, the header and
the body. Everything coming before [description] belongs to the header, and everything
coming after belongs to the body, with the whole document bracketed by the two manpage_*
commands. Before and after these opening and closing commands we have only whitespace.
In the remainder of this section we will discuss only the contents of the header, the
structure of the body will be discussed in the section Text structure.
The header section can be empty, and otherwise may contain only an arbitrary sequence of
the four so-called header commands, plus whitespace. These commands are
titledesc
moddesc
require
copyright
They provide, through their arguments, additional information about the document, like its
title, the title of the larger group the document belongs to (if applicable), the
requirements of the documented packages (if applicable), and copyright assignments. All of
them can occur multiple times, including none, and they can be used in any order. However
for titledesc and moddesc only the last occurrence is taken. For the other two the
specified information is accumulated, in the given order. Regular text is not allowed
within the header.
Given the above a less minimal example of a document is
[manpage_begin NAME SECTION VERSION]
[copyright {YEAR AUTHOR}]
[titledesc TITLE]
[moddesc MODULE_TITLE]
[require PACKAGE VERSION]
[require PACKAGE]
[description]
[manpage_end]
Remember that the whitespace is optional. The document
[manpage_begin NAME SECTION VERSION]
[copyright {YEAR AUTHOR}][titledesc TITLE][moddesc MODULE_TITLE]
[require PACKAGE VERSION][require PACKAGE][description]
[manpage_end]
has the same meaning as the example before.
On the other hand, if whitespace is present it consists not only of any sequence of
characters containing the space character, horizontal and vertical tabs, carriage return,
and newline, but it may contain comment markup as well, in the form of the comment
command.
[comment { ... }]
[manpage_begin NAME SECTION VERSION]
[copyright {YEAR AUTHOR}]
[titledesc TITLE]
[moddesc MODULE_TITLE][comment { ... }]
[require PACKAGE VERSION]
[require PACKAGE]
[description]
[manpage_end]
[comment { ... }]
ADVANCED STRUCTURE
In the simple examples of the last section we fudged a bit regarding the markup actually
allowed to be used before the manpage_begin command opening the document.
Instead of only whitespace the two templating commands include and vset are also allowed,
to enable the writer to either set and/or import configuration settings relevant to the
document. I.e. it is possible to write
[include FILE]
[vset VAR VALUE]
[manpage_begin NAME SECTION VERSION]
[description]
[manpage_end]
Even more important, these two commands are allowed anywhere where a markup command is
allowed, without regard for any other structure. I.e. for example in the header as well.
[manpage_begin NAME SECTION VERSION]
[include FILE]
[vset VAR VALUE]
[description]
[manpage_end]
The only restriction include has to obey is that the contents of the included file must be
valid at the place of the inclusion. I.e. a file included before manpage_begin may contain
only the templating commands vset and include, a file included in the header may contain
only header commands, etc.
TEXT STRUCTURE
The body of the document consists mainly of text, possibly split into sections,
subsections, and paragraphs, with parts marked up to highlight various semantic categories
of text, and additional structure through the use of examples and (nested) lists.
This section explains the high-level structural commands, with everything else deferred to
the following sections.
The simplest way of structuring the body is through the introduction of paragraphs. The
command for doing so is para. Each occurrence of this command closes the previous
paragraph and automatically opens the next. The first paragraph is automatically opened at
the beginning of the body, by description. In the same manner the last paragraph
automatically ends at manpage_end.
[manpage_begin NAME SECTION VERSION]
[description]
[para]
[para]
[manpage_end]
Empty paragraphs are ignored.
A structure coarser than paragraphs are sections, which allow the writer to split a
document into larger, and labeled, pieces. The command for doing so is section. Each
occurrence of this command closes the previous section and automatically opens the next,
including its first paragraph. The first section is automatically opened at the beginning
of the body, by description (This section is labeled "DESCRIPTION"). In the same manner
the last section automatically ends at manpage_end.
Empty sections are not ignored. We are free to (not) use paragraphs within sections.
[manpage_begin NAME SECTION VERSION]
[description]
[section {Section A}]
[para]
[section {Section B}]
[manpage_end]
Between sections and paragraphs we have subsections, to split sections. The command for
doing so is subsection. Each occurrence of this command closes the previous subsection and
automatically opens the next, including its first paragraph. A subsection is automatically
opened at the beginning of the body, by description, and at the beginning of each section.
In the same manner the last subsection automatically ends at manpage_end.
Empty subsections are not ignored. We are free to (not) use paragraphs within subsections.
[manpage_begin NAME SECTION VERSION]
[description]
[section {Section A}]
[subsection {Sub 1}]
[para]
[subsection {Sub 2}]
[section {Section B}]
[manpage_end]
TEXT MARKUP
Having handled the overall structure a writer can impose on the document we now take a
closer at the text in a paragraph.
While most often this is just the unadorned content of the document we do have situations
where we wish to highlight parts of it as some type of thing or other, like command
arguments, command names, concepts, uris, etc.
For this we have a series of markup commands which take the text to highlight as their
single argument. It should be noted that while their predominant use is the highlighting
of parts of a paragraph they can also be used to mark up the arguments of list item
commands, and of other markup commands.
The commands available to us are
arg Its argument is a the name of a command argument.
class Its argument is a class name.
cmd Its argument is a command name (Tcl command).
const Its argument is a constant.
emph General, non-semantic emphasis.
file Its argument is a filename / path.
fun Its argument is a function name.
method Its argument is a method name
namespace
Its argument is namespace name.
opt Its argument is some optional syntax element.
option Its argument is a command line switch / widget option.
package
Its argument is a package name.
sectref
Its argument is the title of a section or subsection, i.e. a section reference.
syscmd Its argument is a command name (external, system command).
term Its argument is a concept, or general terminology.
type Its argument is a type name.
uri Its argument is a uniform resource identifier, i.e an external reference. A second
argument can be used to specify an explicit label for the reference in question.
usage The arguments describe the syntax of a Tcl command.
var Its argument is a variable.
widget Its argument is a widget name.
The example demonstrating the use of text markup is an excerpt from the doctools language
command reference, with some highlighting added. It shows their use within a block of
text, as the arguments of a list item command (call), and our ability to nest them.
[call [cmd arg_def] [arg type] [arg name]] [opt [arg mode]]]
Text structure. List element. Argument list. Automatically closes the
previous list element. Specifies the data-[arg type] of the described
argument of a command, its [arg name] and its i/o-[arg mode]. The
latter is optional.
ESCAPES
Beyond the 20 commands for simple markup shown in the previous section we have two more
available which are technically simple markup. However their function is not the marking
up of phrases as specific types of things, but the insertion of characters, namely [ and
]. These commands, lb and rb respectively, are required because our use of [ and ] to
bracket markup commands makes it impossible to directly use [ and ] within the text.
Our example of their use are the sources of the last sentence in the previous paragraph,
with some highlighting added.
These commands, [cmd lb] and [cmd lb] respectively, are required
because our use of [lb] and [rb] to bracket markup commands makes it
impossible to directly use [lb] and [rb] within the text.
CROSS-REFERENCES
The last two commands we have to discuss are for the declaration of cross-references
between documents, explicit and implicit. They are keywords and see_also. Both take an
arbitrary number of arguments, all of which have to be plain unmarked text. I.e. it is not
allowed to use markup on them. Both commands can be used multiple times in a document. If
that is done all arguments of all occurrences of one of them are put together into a
single set.
keywords
The arguments of this command are interpreted as keywords describing the document.
A processor can use this information to create an index indirectly linking the
containing document to all documents with the same keywords.
see_also
The arguments of this command are interpreted as references to other documents. A
processor can format them as direct links to these documents.
All the cross-reference commands can occur anywhere in the document between manpage_begin
and manpage_end. As such the writer can choose whether she wants to have them at the
beginning of the body, or at its end, maybe near the place a keyword is actually defined
by the main content, or considers them as meta data which should be in the header, etc.
Our example shows the sources for the cross-references of this document, with some
highlighting added. Incidentally they are found at the end of the body.
[see_also doctools_intro]
[see_also doctools_lang_syntax]
[see_also doctools_lang_cmdref]
[keywords markup {semantic markup}]
[keywords {doctools markup} {doctools language}]
[keywords {doctools syntax} {doctools commands}]
[manpage_end]
EXAMPLES
Where ever we can write plain text we can write examples too. For simple examples we have
the command example which takes a single argument, the text of the argument. The example
text must not contain markup. If we wish to have markup within an example we have to use
the 2-command combination example_begin / example_end instead.
The first opens an example block, the other closes it, and in between we can write plain
text and use all the regular text markup commands. Note that text structure commands are
not allowed. This also means that it is not possible to embed examples and lists within an
example. On the other hand, we can use templating commands within example blocks to read
their contents from a file (Remember section Advanced structure).
The source for the very first example in this document (see section Fundamentals), with
some highlighting added, is
[example {
}]
Using example_begin / example_end this would look like
[example_begin]
[example_end]
LISTS
Where ever we can write plain text we can write lists too. The main commands are
list_begin to start a list, and list_end to close one. The opening command takes an
argument specifying the type of list started it, and this in turn determines which of the
eight existing list item commands are allowed within the list to start list items.
After the opening command only whitespace is allowed, until the first list item command
opens the first item of the list. Each item is a regular series of paragraphs and is
closed by either the next list item command, or the end of the list. If closed by a list
item command this command automatically opens the next list item. A consequence of a list
item being a series of paragraphs is that all regular text markup can be used within a
list item, including examples and other lists.
The list types recognized by list_begin and their associated list item commands are:
arguments
(arg_def) This opens an argument (declaration) list. It is a specialized form of a
term definition list where the term is an argument name, with its type and i/o-
mode.
commands
(cmd_def) This opens a command (declaration) list. It is a specialized form of a
term definition list where the term is a command name.
definitions
(def and call) This opens a general term definition list. The terms defined by the
list items are specified through the argument(s) of the list item commands, either
general terms, possibly with markup (def), or Tcl commands with their syntax
(call).
enumerated
(enum) This opens a general enumerated list.
itemized
(item) This opens a general itemized list.
options
(opt_def) This opens an option (declaration) list. It is a specialized form of a
term definition list where the term is an option name, possibly with the option's
arguments.
tkoptions
(tkoption_def) This opens a widget option (declaration) list. It is a specialized
form of a term definition list where the term is the name of a configuration option
for a widget, with its name and class in the option database.
Our example is the source of the definition list in the previous paragraph, with most of
the content in the middle removed.
[list_begin definitions]
[def [const arg]]
([cmd arg_def]) This opens an argument (declaration) list. It is a
specialized form of a definition list where the term is an argument
name, with its type and i/o-mode.
[def [const itemized]]
([cmd item])
This opens a general itemized list.
[def [const tkoption]]
([cmd tkoption_def]) This opens a widget option (declaration) list. It
is a specialized form of a definition list where the term is the name
of a configuration option for a widget, with its name and class in the
option database.
[list_end]
Note that a list cannot begin in one (sub)section and end in another. Differently said,
(sub)section breaks are not allowed within lists and list items. An example of this
illegal construct is
[list_begin itemized]
[item]
[section {ILLEGAL WITHIN THE LIST}]
[list_end]
FURTHER READING
Now that this document has been digested the reader, assumed to be a writer of
documentation should be fortified enough to be able to understand the formal doctools
language syntax specification as well. From here on out the doctools language command
reference will also serve as the detailed specification and cheat sheet for all available
commands and their syntax.
To be able to validate a document while writing it, it is also recommended to familiarize
oneself with one of the applications for the processing and conversion of doctools
documents, i.e. either Tcllib's easy and simple dtplite, or Tclapps' ultra-configurable
dtp.
BUGS, IDEAS, FEEDBACK
This document, will undoubtedly contain bugs and other problems. Please report such in
the category doctools of the Tcllib SF Trackers
[http://sourceforge.net/tracker/?group_id=12883]. Please also report any ideas for
enhancements you may have.
SEE ALSO
doctools_intro, doctools_lang_cmdref, doctools_lang_faq, doctools_lang_syntax
KEYWORDS
doctools commands, doctools language, doctools markup, doctools syntax, markup, semantic
markup
CATEGORY
Documentation tools
COPYRIGHT
Copyright (c) 2007 Andreas Kupries <andreas_kupries@users.sourceforge.net>