Provided by: libbobcat-dev_3.19.01-1ubuntu1_amd64 
NAME
FBB::EncryptBuf - Encrypts information using various methods into a std::ostream
SYNOPSIS
#include <bobcat/encryptbuf>
Linking option: -lbobcat
DESCRIPTION
FBB::EncryptBuf objects are std::streambuf objects that can be used to initialize
std::ostream objects with.
All information inserted into such a std::ostream is encrypted and written into a
std::ostream that is given as argument to EncryptBuf’s constructor.
All encryption methods defined by the OpenSSL library that can be selected by name may be
used in combination with EncryptBuf objects. To select a particular encryption method an
identifier is passed to the constructor. E.g., "aes-128-cbc" indicating the AES (Rijndael)
method, using 128 bit sized keys and blocks using `cbc’ mode (see below for an
explanation).
When providing shorter keys than expected by the method the provided key is extended by
adding the required number of 0-bytes. (zero valued bytes, not ’0’ characters).
Most modes use an initialization vector. Unless provided at construction time or
explicitly set thereafter an initialization vector containg randomly selected values will
be used. The initialization vector that is actually used can be obtained from the
EncryptBuf object. This is important, as the matching decrypting object needs to know the
initialization vector that was used when encrypting the data. Initialization vectors are
not security sensitive in the sense that they can be sent in the clear to the decryption
object. What is important, though, is that they contain random data when used `for real’.
When an initialization vector is specified that is shorter than expected by the method it
will be extended with the required number of 0-bytes.
Block ciphers use one of the following four encryption modes:
o CBC (Cipher Block Chaining):
The first block is XOR-ed by the initialization vector and then encrypted using the
specified method. Subsequent blocks are XOR-ed by the encrypted version of the
preceding block. Due to the initialization vector dictionary attacks are
infeasible, as long as the initialization vector is truly random.
o ECB (Electronic Code Book):
Each block is encrypted by itself, using the specified encryption method. Although
an initialization vector may be specified, it is not used. This method is
susceptible to dictionary attacks and should therefore be avoided, unless you know
what you’re doing.
o CFB (Cipher Feednack):
This method allows a block cipher to be used as a stream cipher. It uses an
initialization vector, which should be unique and random for each new stream of
data that is encrypted using the method. Encryption can only start after the first
data block has been received.
o OFB (Output Feednack):
This is an alternative way to use a block cipher as a stream cipher. It is somewhat
more susceptible to traditional data manipulation attacks, which can usually be
thwarted when a message authentication code is added to the information as well.
Like CFB it uses an initialization vector, which should again be unique and random
for each new stream of data that is encrypted.
The following table presents an overview of methods that are currently available. Methods
for which the block size is specified as N.A. are stream ciphers; other methods are block
ciphers:
────────────────────────────────────────────────────────────────
method keysize blocksize mode identifier
(bytes) (bytes)
────────────────────────────────────────────────────────────────
AES 16 8 CBC "aes-128-cbc"
EBC "aes-128-ecb"
CFB "aes-128-cfb"
OFB "aes-128-ofb"
24 24 CBC "aes-192-cbc"
EBC "aes-192-ecb"
CFB "aes-192-cfb"
OFB "aes-192-ofb"
32 32 CBC "aes-256-cbc"
EBC "aes-256-ecb"
CFB "aes-256-cfb"
OFB "aes-256-ofb"
────────────────────────────────────────────────────────────────
BLOWFISH 16 8 CBC "bf-cbc"
EBC "bf-ecb"
CFB "bf-cfb"
OFB "bf-ofb"
max key length is 56 bytes, 16 generally used
────────────────────────────────────────────────────────────────
CAMELLIA 16 16 CBC "camellia-128-cbc"
EBC "camellia-128-ecb"
CFB "camellia-128-cfb"
OFB "camellia-128-ofb"
24 CBC "camellia-192-cbc"
EBC "camellia-192-ecb"
CFB "camellia-192-cfb"
OFB "camellia-192-ofb"
32 CBC "camellia-256-cbc"
EBC "camellia-256-ecb"
CFB "camellia-256-cfb"
OFB "camellia-256-ofb"
────────────────────────────────────────────────────────────────
CAST 16 8 CBC "cast-cbc"
EBC "cast-ecb"
CFB "cast-cfb"
OFB "cast-ofb"
min key length is 5 bytes, max is shown
────────────────────────────────────────────────────────────────
DES 8 8 CBC "des-cbc"
EBC "des-ebc"
CFB "des-cfb"
OFB "des-ofb"
────────────────────────────────────────────────────────────────
DESX 8 8 CBC "desx-cbc"
────────────────────────────────────────────────────────────────
3DES 16 8 CBC "des-ede-cbc"
EBC "des-ede"
CFB "des-ede-cfb"
OFB "des-ede-ofb"
────────────────────────────────────────────────────────────────
3DES 24 8 CBC "des-ede3-cbc"
EBC "des-ede3"
CFB "des-ede3-cfb"
OFB "des-ede3-ofb"
Key bytes 9-16 define the 2nd key, bytes 17-24
define the 3rd key
────────────────────────────────────────────────────────────────
RC2 16 8 CBC "rc2-cbc"
EBC "rc2-ecb"
CFB "rc2-cfb"
OFB "rc2-ofb"
Key length variable, max. 128 bytes, default length is shown
────────────────────────────────────────────────────────────────
RC2-40 5 8 "rc2-40-cbc"
obsolete: avoid
────────────────────────────────────────────────────────────────
RC2-64 8 8 "rc2-64-cbc"
obsolete: avoid
────────────────────────────────────────────────────────────────
RC4 16 N.A. "rc4"
Key length is variable, max. 256 bytes. default length is shown
Encrypt again to decrypt. Don’t use DecryptBuf
────────────────────────────────────────────────────────────────
RC4-40 5 N.A. "rc4-40"
obsolete: avoid
────────────────────────────────────────────────────────────────
RC5 16 8 CBC "rc5-cbc"
EBC "rc5-ecb"
CFB "rc5-cfb"
OFB "rc5-ofb"
Key length variable, max. 256 bytes, rounds 8, 12 or 16,
default # rounds is 12
────────────────────────────────────────────────────────────────
The RC4 stream cipher is subject to a well-known attack (cf.
http://www.wisdom.weizmann.ac.il/~itsik/RC4/Papers/Mantin1.zip) unless the initial 256
bytes produced by the cipher are discarded.
NAMESPACE
FBB
All constructors, members, operators and manipulators, mentioned in this man-page, are
defined in the namespace FBB.
INHERITS FROM
std::streambuf
CONSTRUCTOR
o EncryptBuf(std::ostream &outStream, char const *type, std::string const &key,
std::string const &iv, size_t bufsize = 1024):
This constructor initializes the EncryptBuf object preparing it for the message
encrypt algorithm specified with type. The encryption algorithms that can be used
are listed in the table found in the DESCRIPTION section. E.g., to use the AES
method on 24 bit keys and blocks in CBC mode specify "aes-192-cbc". The key
parameter refers to the key to be used, the iv parameter refers to the
initialization vector to use. Both key and iv may contain non-displayable
characters. When iv.length() is zero at the time encryption starts it will be
filled by the EncryptBuf object with random data. When the key and/or the iv is too
small for the requested method they will be expanded by adding the required number
of zero valued bytes.
The constructor throws an FBB::Exception exception if an unknown encryption method
was specified.
The constructor’s first parameter refers to the std::ostream to receive the
encrypted information. Be aware of the fact that the encrypted information most
likely contains non-displayable characters.
The bufsize argument specifies the size in bytes of the internal buffer used by
EncryptBuf to store incoming characters temporarily. The provided default argument
should be OK in all normal cases. There is no copy constructor, nor move
constructor (as std::streambuf doesn’t support either).
MEMBER FUNCTIONS
All members of std::streambuf are available, as FBB::EncryptBuf inherits from this class.
Some of the std::streambuf’s member are overridden or are hidden by EncryptBuf. In normal
situations these inherited members will not be used by programs using EncryptBuf objects.
o size_t blockLength() const:
This member returns the block size (in bytes) that are used by the specified
method.
o size_t ivLength() const:
This member returns the size (in bytes) of the initialization vector that is used
by the specified method.
o std::string iv() const:
This member returns a reference to the initialization vector that is used by the
specified method. Be advised that the initialization vector may contain
non-displayable characters.
o size_t keyLength() const:
This member returns the size of the key (in bytes) that are used by the specified
method.
o size_t rounds() const:
This member can only be used with the RC5 encryption method to query the number of
rounds of the algorithm. It returns the currently used number of rounds or 0 if the
member is called for another encryption method than RC5.
o void setIv(std::string const &iv):
This member can be used to specify the initialization vector to use after
construction time but before any data has been encrypted. When called after
encryption has started an FBB::Exception exception will be thrown.
o void setKey(std::string const &key, size_t numberOfBytes = 0):
This member can be used to specify the key and its length after construction time
but before any data has been encrypted. When called after encryption has started an
FBB::Exception exception will be thrown. The size of the key is assumed to be the
number of bytes in the key’s data. If another key length is required the member
function’s second parameter can be used to specify the length of the key in bytes.
o bool setRounds(size_t nRounds):
This member can only be used with the RC5 encryption method to set the number of
rounds of the algorithm to 8, 12 or 16. When the number of rounds were updated
successfully the member returns true. It returns false in other cases (e.g., called
for other encryption methods than RC5 or the requested number of rounds differ from
8, 12 or 16).
PROTECTED MEMBER
o EVP_CIPHER_CTX *cipherCtx():
Classes derived from EncryptBuf may use this member to gain direct access to the
EVP_CIPHER_CTX pointer used by the EncryptBuf object. This pointer is a pointer to
an opaque structure used by many OpenSSL functions to set or query parameters of an
encryption method.
EXAMPLE
#include <iostream>
#include <fstream>
#include <bobcat/errno>
#include <bobcat/encryptbuf>
#include <bobcat/ohexstreambuf>
#include <openssl/evp.h>
using namespace std;
using namespace FBB;
int main(int argc, char **argv)
try
{
if (argc == 1)
throw Errno("1st arg: method, 2nd arg: key, 3rd arg: (opt): iv, "
"stdin: file to encrypt (to stdout)");
string key(argv[2]);
string iv;
if (argc > 3)
iv = argv[3];
EncryptBuf encryptbuf(cout, argv[1], key, iv);
ostream out(&encryptbuf);
cerr << "Block length: " << encryptbuf.blockLength() << ’\n’ <<
"Key length: " << encryptbuf.keyLength() << ’\n’ <<
"Max Key length: " << EVP_MAX_KEY_LENGTH << ’\n’ <<
"IV length: " << encryptbuf.ivLength() << endl;
cerr << encryptbuf.iv().length() << ’ ’;
OHexStreambuf ohsb(cerr);
ostream ohs(&ohsb);
ohs.write(encryptbuf.iv().data(), encryptbuf.iv().length()) << flush;
cerr << endl;
out << cin.rdbuf();
}
catch(Errno const &err)
{
cout << err.why() << endl;
return 1;
}
To ignore the initial 256 bytes generated by the RC4 algorithm a simple wrapper class
around the eventual output stream can be used. Here is an illustration:
#include <ostream>
#include <bobcat/ofilterstreambuf>
class Skip256: public FBB::OFilterStreambuf
{
size_t d_count;
public:
Skip256(std::ostream &os)
:
OFilterStreambuf(os),
d_count(0)
{}
private:
virtual int overflow(int c)
{
if (d_count == 256)
out().put(c);
else
++d_count;
return c;
}
};
Next, an Skip256 object is used to define an intermediate std::ostream that is then passed
to the EncryptBuf object. E.g., only showing the essential steps defining the EncryptBuf
object:
Skip256 skip256(std::cout);
std::ostream out(&skip256);
EncryptBuf encryptbuf(out, "rc4", key, "");
FILES
bobcat/encryptbuf - defines the class interface
SEE ALSO
bobcat(7), decryptbuf(3bobcat), ofilterstreambuf(3bobcat), std::streambuf
BUGS
None reported
DISTRIBUTION FILES
o bobcat_3.19.01-x.dsc: detached signature;
o bobcat_3.19.01-x.tar.gz: source archive;
o bobcat_3.19.01-x_i386.changes: change log;
o libbobcat1_3.19.01-x_*.deb: debian package holding the libraries;
o libbobcat1-dev_3.19.01-x_*.deb: debian package holding the libraries, headers and
manual pages;
o http://sourceforge.net/projects/bobcat: public archive location;
BOBCAT
Bobcat is an acronym of `Brokken’s Own Base Classes And Templates’.
COPYRIGHT
This is free software, distributed under the terms of the GNU General Public License
(GPL).
AUTHOR
Frank B. Brokken (f.b.brokken@rug.nl).