Provided by: erlang-manpages_16.b.3-dfsg-1ubuntu2.2_all 
NAME
erl_tar - Unix 'tar' utility for reading and writing tar archives
DESCRIPTION
The erl_tar module archives and extract files to and from a tar file. The tar file format
is the POSIX extended tar file format specified in IEEE Std 1003.1 and ISO/IEC 9945-1.
That is the same format as used by tar program on Solaris, but is not the same as used by
the GNU tar program.
By convention, the name of a tar file should end in ".tar". To abide to the convention,
you'll need to add ".tar" yourself to the name.
Tar files can be created in one operation using the create/2 or create/3 function.
Alternatively, for more control, the open, add/3,4, and close/1 functions can be used.
To extract all files from a tar file, use the extract/1 function. To extract only some
files or to be able to specify some more options, use the extract/2 function.
To return a list of the files in a tar file, use either the table/1 or table/2 function.
To print a list of files to the Erlang shell, use either the t/1 or tt/1 function.
To convert an error term returned from one of the functions above to a readable message,
use the format_error/1 function.
LIMITATIONS
For maximum compatibility, it is safe to archive files with names up to 100 characters in
length. Such tar files can generally be extracted by any tar program.
If filenames exceed 100 characters in length, the resulting tar file can only be correctly
extracted by a POSIX-compatible tar program (such as Solaris tar), not by GNU tar.
File have longer names than 256 bytes cannot be stored at all.
The filename of the file a symbolic link points is always limited to 100 characters.
EXPORTS
add(TarDescriptor, Filename, Options) -> RetValue
Types:
TarDescriptor = term()
Filename = filename()
Options = [Option]
Option = dereference|verbose
RetValue = ok|{error,{Filename,Reason}}
Reason = term()
The add/3 function adds a file to a tar file that has been opened for writing by
open/1.
dereference:
By default, symbolic links will be stored as symbolic links in the tar file.
Use the dereference option to override the default and store the file that the
symbolic link points to into the tar file.
verbose:
Print an informational message about the file being added.
add(TarDescriptor, FilenameOrBin, NameInArchive, Options) -> RetValue
Types:
TarDescriptor = term()
FilenameOrBin = Filename()|binary()
Filename = filename()()
NameInArchive = filename()
Options = [Option]
Option = dereference|verbose
RetValue = ok|{error,{Filename,Reason}}
Reason = term()
The add/4 function adds a file to a tar file that has been opened for writing by
open/1. It accepts the same options as add/3.
NameInArchive is the name under which the file will be stored in the tar file. That
is the name that the file will get when it will be extracted from the tar file.
close(TarDescriptor)
Types:
TarDescriptor = term()
The close/1 function closes a tar file opened by open/1.
create(Name, FileList) ->RetValue
Types:
Name = filename()
FileList = [Filename|{NameInArchive, binary()},{NameInArchive, Filename}]
Filename = filename()
NameInArchive = filename()
RetValue = ok|{error,{Name,Reason}}
Reason = term()
The create/2 function creates a tar file and archives the files whose names are
given in FileList into it. The files may either be read from disk or given as
binaries.
create(Name, FileList, OptionList)
Types:
Name = filename()
FileList = [Filename|{NameInArchive, binary()},{NameInArchive, Filename}]
Filename = filename()
NameInArchive = filename()
OptionList = [Option]
Option = compressed|cooked|dereference|verbose
RetValue = ok|{error,{Name,Reason}}
Reason = term()
The create/3 function creates a tar file and archives the files whose names are
given in FileList into it. The files may either be read from disk or given as
binaries.
The options in OptionList modify the defaults as follows.
compressed:
The entire tar file will be compressed, as if it has been run through the gzip
program. To abide to the convention that a compressed tar file should end in
".tar.gz" or ".tgz", you'll need to add the appropriate extension yourself.
cooked:
By default, the open/2 function will open the tar file in raw mode, which is
faster but does not allow a remote (erlang) file server to be used. Adding
cooked to the mode list will override the default and open the tar file without
the raw option.
dereference:
By default, symbolic links will be stored as symbolic links in the tar file.
Use the dereference option to override the default and store the file that the
symbolic link points to into the tar file.
verbose:
Print an informational message about each file being added.
extract(Name) -> RetValue
Types:
Name = filename()
RetValue = ok|{error,{Name,Reason}}
Reason = term()
The extract/1 function extracts all files from a tar archive.
If the Name argument is given as "{binary,Binary}", the contents of the binary is
assumed to be a tar archive.
If the Name argument is given as "{file,Fd}", Fd is assumed to be a file descriptor
returned from the file:open/2 function.
Otherwise, Name should be a filename.
extract(Name, OptionList)
Types:
Name = filename() | {binary,Binary} | {file,Fd}
Binary = binary()
Fd = file_descriptor()
OptionList = [Option]
Option = {cwd,Cwd}|{files,FileList}|keep_old_files|verbose|memory
Cwd = [dirname()]
FileList = [filename()]
RetValue = ok|MemoryRetValue|{error,{Name,Reason}}
MemoryRetValue = {ok, [{NameInArchive,binary()}]}
NameInArchive = filename()
Reason = term()
The extract/2 function extracts files from a tar archive.
If the Name argument is given as "{binary,Binary}", the contents of the binary is
assumed to be a tar archive.
If the Name argument is given as "{file,Fd}", Fd is assumed to be a file descriptor
returned from the file:open/2 function.
Otherwise, Name should be a filename.
The following options modify the defaults for the extraction as follows.
{cwd,Cwd}:
Files with relative filenames will by default be extracted to the current
working directory. Given the {cwd,Cwd} option, the extract/2 function will
extract into the directory Cwd instead of to the current working directory.
{files,FileList}:
By default, all files will be extracted from the tar file. Given the
{files,Files} option, the extract/2 function will only extract the files whose
names are included in FileList.
compressed:
Given the compressed option, the extract/2 function will uncompress the file
while extracting If the tar file is not actually compressed, the compressed
will effectively be ignored.
cooked:
By default, the open/2 function will open the tar file in raw mode, which is
faster but does not allow a remote (erlang) file server to be used. Adding
cooked to the mode list will override the default and open the tar file without
the raw option.
memory:
Instead of extracting to a directory, the memory option will give the result as
a list of tuples {Filename, Binary}, where Binary is a binary containing the
extracted data of the file named Filename in the tar file.
keep_old_files:
By default, all existing files with the same name as file in the tar file will
be overwritten Given the keep_old_files option, the extract/2 function will not
overwrite any existing files.
verbose:
Print an informational message as each file is being extracted.
format_error(Reason) -> string()
Types:
Reason = term()
The format_error/1 function converts an error reason term to a human-readable error
message string.
open(Name, OpenModeList) -> RetValue
Types:
Name = filename()
OpenModeList = [OpenMode]
Mode = write|compressed|cooked
RetValue = {ok,TarDescriptor}|{error,{Name,Reason}}
TarDescriptor = term()
Reason = term()
The open/2 function creates a tar file for writing. (Any existing file with the
same name will be truncated.)
By convention, the name of a tar file should end in ".tar". To abide to the
convention, you'll need to add ".tar" yourself to the name.
Except for the write atom the following atoms may be added to OpenModeList:
compressed:
The entire tar file will be compressed, as if it has been run through the gzip
program. To abide to the convention that a compressed tar file should end in
".tar.gz" or ".tgz", you'll need to add the appropriate extension yourself.
cooked:
By default, the open/2 function will open the tar file in raw mode, which is
faster but does not allow a remote (erlang) file server to be used. Adding
cooked to the mode list will override the default and open the tar file without
the raw option.
Use the add/3,4 functions to add one file at the time into an opened tar file. When
you are finished adding files, use the close function to close the tar file.
Warning:
The TarDescriptor term is not a file descriptor. You should not rely on the
specific contents of the TarDescriptor term, as it may change in future versions as
more features are added to the erl_tar module.
table(Name) -> RetValue
Types:
Name = filename()
RetValue = {ok,[string()]}|{error,{Name,Reason}}
Reason = term()
The table/1 function retrieves the names of all files in the tar file Name.
table(Name, Options)
Types:
Name = filename()
The table/2 function retrieves the names of all files in the tar file Name.
t(Name)
Types:
Name = filename()
The t/1 function prints the names of all files in the tar file Name to the Erlang
shell. (Similar to "tar t".)
tt(Name)
Types:
Name = filename()
The tt/1 function prints names and information about all files in the tar file Name
to the Erlang shell. (Similar to "tar tv".)