NAME

       libpfm_intel_snbep_unc_ubo - support for Intel Sandy Bridge-EP U-Box uncore PMU

SYNOPSIS

       #include <perfmon/pfmlib.h>

       PMU name: snbep_unc_ubo
       PMU desc: Intel Sandy Bridge-EP U-Box uncore PMU

DESCRIPTION

       The  library supports the Intel Sandy Bridge system configuration unit (U-Box) uncore PMU.
       This PMU model only exists on Sandy Bridge model 45. There  is  only  one  U-Box  PMU  per
       processor socket.

MODIFIERS

       The following modifiers are supported on Intel Sandy Bridge U-Box uncore PMU:

       i      Invert  the meaning of the event. The counter will now count HA cycles in which the
              event is not occurring. This is a boolean modifier

       e      Enable edge detection, i.e., count only when there is a state  transition  from  no
              occurrence  of the event to at least one occurrence. This modifier must be combined
              with a threshold modifier (t) with a value greater or equal  to  one.   This  is  a
              boolean modifier.

       t      Set  the  threshold  value.  When  set  to a non-zero value, the counter counts the
              number of HA cycles in which the number of occurrences of the event is  greater  or
              equal  to  the  threshold.   This  is  an integer modifier with values in the range
              [0:15].

       oi     Invert the meaning of the occupancy event POWER_STATE_OCCUPANCY. The  counter  will
              now  count  PCU  cycles  in  which  the  event  is not occurring. This is a boolean
              modifier

       oe     Enable edge detection for the occupancy event POWER_STATE_OCCUPANCY. The event  now
              counts  only when there is a state transition from no occurrence of the event to at
              least one occurrence. This modifier must be combined with a threshold modifier  (t)
              with a value greater or equal to one.  This is a boolean modifier.

       ff     Enable   frequency   band   filtering.   This   modifier   applies   only   to  the
              UNC_P_FREQ_BANDx_CYCLES events, where x is [0-3].  The modifiers expects an integer
              in the range [0-255]. The value is interpreted as a frequency value to be multipled
              by 100Mhz. Thus if the value is 32, then all cycles where the processor is  running
              at 3.2GHz and more are counted.

Frequency band filtering

       There    are    3    events    which    support    frequency   band   filtering,   namely,
       UNC_P_FREQ_BAND0_CYCLES,         UNC_P_FREQ_BAND1_CYCLES,         UNC_P_FREQ_BAND2_CYCLES,
       UNC_P_FREQ_BAND3_CYCLES.  The  frequency  filter (available via the ff modifier) is stored
       into a PMU shared register which hold all 4  possible  frequency  bands,  one  per  event.
       However,  the  library  generate  the  encoding  for  each  event  individually because it
       processes events one at a time. The caller or the underlying kernel interface may have  to
       merge the band filter settings to program the filter register properly.

AUTHORS

       Stephane Eranian <eranian@gmail.com>

                                           August, 2012                                 LIBPFM(3)