Provided by: nbdkit_1.1.3-2_amd64 
NAME
nbdkit-plugin - How to write nbdkit plugins
SYNOPSIS
#include <nbdkit-plugin.h>
#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS
static void *
myplugin_open (void)
{
/* create a handle ... */
return handle;
}
static struct nbdkit_plugin plugin = {
.name = "myplugin",
.open = myplugin_open,
.get_size = myplugin_get_size,
.pread = myplugin_pread,
.pwrite = myplugin_pwrite,
/* etc */
};
NBDKIT_REGISTER_PLUGIN(plugin)
When this has been compiled to a shared library, do:
nbdkit [--args ...] myplugin.so [key=value ...]
When debugging, use the -fv options:
nbdkit -fv myplugin.so [key=value ...]
DESCRIPTION
An nbdkit plugin is a new source device which can be served using the Network Block Device (NBD)
protocol. This manual page describes how to create an nbdkit plugin.
For example plugins, take a look at the source of nbdkit, in the "plugins" directory.
"nbdkit-plugin.h"
All plugins should start by including this header file:
#include <nbdkit-plugin.h>
"#define THREAD_MODEL"
All plugins must define a thread model. See "THREADS" below for details. It is generally safe to use:
#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS
"struct nbdkit_plugin"
All plugins must define and register one "struct nbdkit_plugin", which contains the name of the plugin
and pointers to callback functions.
static struct nbdkit_plugin plugin = {
.name = "myplugin",
.longname = "My Plugin",
.description = "This is my great plugin for nbdkit",
.open = myplugin_open,
.get_size = myplugin_get_size,
.pread = myplugin_pread,
.pwrite = myplugin_pwrite,
/* etc */
};
NBDKIT_REGISTER_PLUGIN(plugin)
The ".name" field is the name of the plugin.
The callbacks are described below (see "CALLBACKS"). Only ".name", ".open", ".get_size" and ".pread" are
required. All other callbacks can be omitted. However almost all plugins should have a ".close"
callback. Most real-world plugins will also want to declare some of the other callbacks.
The nbdkit server calls the callbacks in the following order over the lifetime of the plugin:
".load"
is called once just after the plugin is loaded into memory.
".config" and ".config_complete"
".config" is called zero or more times during command line parsing. ".config_complete" is called
once after all configuration information has been passed to the plugin.
Both are called after loading the plugin but before any connections are accepted.
".open"
A new client has connected.
".can_write", ".get_size" and other option negotiation callbacks
These are called during option negotiation with the client, but before any data is served.
".pread", ".pwrite" and other data serving callbacks
After option negotiation has finished, these may be called to serve data. Depending on the thread
model chosen, they might be called in parallel from multiple threads.
".close"
The client has disconnected.
".open" ... ".close"
The sequence ".open" ... ".close" can be called repeatedly over the lifetime of the plugin, and can
be called in parallel (depending on the thread model).
".unload"
is called once just before the plugin is unloaded from memory.
ERROR HANDLING
If there is an error in the plugin, the plugin should call "nbdkit_error" with the error message, and
then return an error indication from the callback, eg. NULL or -1.
"nbdkit_error" has the following prototype and works like printf(3):
void nbdkit_error (const char *fs, ...);
FILENAMES AND PATHS
The server usually (not always) changes directory to "/" before it starts serving connections. This
means that any relative paths passed during configuration will not work when the server is running
(example: "nbdkit plugin.so file=disk.img").
To avoid problems, prepend relative paths with the current directory before storing them in the handle.
Or open files and store the file descriptor.
"nbdkit_absolute_path"
char *nbdkit_absolute_path (const char *filename);
The utility function "nbdkit_absolute_path" converts any path to an absolute path.
If conversion was not possible, this calls "nbdkit_error" and returns "NULL". Note that this function
does not check that the file exists.
The returned string must be freed by the caller.
CALLBACKS
".name"
const char *name;
This field (a string) is required, and must contain only ASCII alphanumeric characters and be unique
amongst all plugins.
".version"
const char *version;
Plugins may optionally set a version string which is displayed in help and debugging output.
".longname"
const char *longname;
An optional free text name of the plugin. This field is used in error messages.
".description"
const char *description;
An optional multi-line description of the plugin.
".load"
void load (void);
This is called once just after the plugin is loaded into memory. You can use this to perform any global
initialization needed by the plugin.
".unload"
void unload (void);
This may be called once just before the plugin is unloaded from memory. Note that it's not guaranteed
that ".unload" will always be called (eg. the server might be killed or segfault), so you should try to
make the plugin as robust as possible by not requiring cleanup.
".config"
int config (const char *key, const char *value);
On the nbdkit command line, after the plugin filename, come an optional list of "key=value" arguments.
These are passed to the plugin through this callback when the plugin is first loaded and before any
connections are accepted.
This callback may be called zero or more times. Both "key" and "value" parameters will be non-NULL, but
it is possible for either to be empty strings. The strings are owned by nbdkit but will remain valid for
the lifetime of the plugin, so the plugin does not need to copy them.
The format of the "key" accepted by plugins is up to the plugin, but you should probably look at other
plugins and follow the same conventions.
If the value is a relative path, then note that the server changes directory when it starts up. See
"FILENAMES AND PATHS" above.
If the ".config" callback is not provided by the plugin, and the user tries to specify any "key=value"
arguments, then nbdkit will exit with an error.
If there is an error, ".config" should call "nbdkit_error" with an error message and return "-1".
".config_complete"
int config_complete (void);
This optional callback is called after all the configuration has been passed to the plugin. It is a good
place to do checks, for example that the user has passed the required parameters to the plugin.
If there is an error, ".config_complete" should call "nbdkit_error" with an error message and return
"-1".
".config_help"
const char *config_help;
This optional multi-line help message should summarize any "key=value" parameters that it takes. It does
not need to repeat what already appears in ".description".
If the plugin doesn't take any config parameters you should probably omit this.
".open"
void *open (int readonly);
This is called when a new client connects to the nbdkit server. The callback should allocate a handle
and return it. This handle is passed back to other callbacks and could be freed in the ".close"
callback.
Note that the handle is completely opaque to nbdkit, but it must not be NULL.
The "readonly" flag informs the plugin that the user requested a read-only connection using the -r flag
on the command line. Note that the plugin may additionally force the connection to be readonly (even if
this flag is false) by returning false from the ".can_write" callback. So if your plugin can only serve
read-only, you can ignore this parameter.
If there is an error, ".open" should call "nbdkit_error" with an error message and return "NULL".
".close"
void close (void *handle);
This is called when the client closes the connection. It should clean up any per-connection resources.
Note there is no way in the NBD protocol to communicate close errors back to the client, for example if
your plugin calls close(2) and you are checking for errors (as you should do). Therefore the best you
can do is to log the error on the server. Well-behaved NBD clients should try to flush the connection
before it is closed and check for errors, but obviously this is outside the scope of nbdkit.
".get_size"
int64_t get_size (void *handle);
This is called during the option negotiation phase of the protocol to get the size (in bytes) of the
block device being exported.
The returned size must be ≥ 0. If there is an error, ".get_size" should call "nbdkit_error" with an
error message and return "-1".
".can_write"
int can_write (void *handle);
This is called during the option negotiation phase to find out if the handle supports writes.
If there is an error, ".can_write" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return true iff a ".pwrite" callback has been
defined.
".can_flush"
int can_flush (void *handle);
This is called during the option negotiation phase to find out if the handle supports the flush-to-disk
operation.
If there is an error, ".can_flush" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return true iff a ".flush" callback has been defined.
".is_rotational"
int is_rotational (void *handle);
This is called during the option negotiation phase to find out if the backing disk is a rotational medium
(like a disk) or not (like an SSD). If true, this may cause the client to reorder requests to make them
more efficient for a slow rotating disk.
If there is an error, ".is_rotational" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return false.
".can_trim"
int can_trim (void *handle);
This is called during the option negotiation phase to find out if the plugin supports the trim/discard
operation for punching holes in the backing storage.
If there is an error, ".can_trim" should call "nbdkit_error" with an error message and return "-1".
This callback is not required. If omitted, then we return true iff a ".trim" callback has been defined.
".pread"
int pread (void *handle, void *buf, uint32_t count, uint64_t offset);
During the data serving phase, nbdkit calls this callback to read data from the backing store. "count"
bytes starting at "offset" in the backing store should be read and copied into "buf". nbdkit takes care
of all bounds- and sanity-checking, so the plugin does not need to worry about that.
The callback must read the whole "count" bytes if it can. The NBD protocol doesn't allow partial reads
(instead, these would be errors). If the whole "count" bytes was read, the callback should return 0 to
indicate there was no error.
If there is an error (including a short read which couldn't be recovered from), ".pread" should call
"nbdkit_error" with an error message and return "-1".
".pwrite"
int pwrite (void *handle, const void *buf, uint32_t count, uint64_t offset);
During the data serving phase, nbdkit calls this callback to write data to the backing store. "count"
bytes starting at "offset" in the backing store should be written using the data in "buf". nbdkit takes
care of all bounds- and sanity-checking, so the plugin does not need to worry about that.
The callback must write the whole "count" bytes if it can. The NBD protocol doesn't allow partial writes
(instead, these would be errors). If the whole "count" bytes was written successfully, the callback
should return 0 to indicate there was no error.
If there is an error (including a short write which couldn't be recovered from), ".pwrite" should call
"nbdkit_error" with an error message and return "-1".
".flush"
int flush (void *handle);
During the data serving phase, this callback is used to fdatasync(2) the backing store, ie. to ensure it
has been completely written to a permanent medium. If that is not possible then you can omit this
callback.
If there is an error, ".flush" should call "nbdkit_error" with an error message and return "-1".
".trim"
int trim (void *handle, uint32_t count, uint64_t offset);
During the data serving phase, this callback is used to "punch holes" in the backing store. If that is
not possible then you can omit this callback.
If there is an error, ".trim" should call "nbdkit_error" with an error message and return "-1".
THREADS
Each nbdkit plugin must declare its thread safety model by defining the "THREAD_MODEL" macro. (This
macro is used by "NBDKIT_REGISTER_PLUGIN").
The possible settings for "THREAD_MODEL" are defined below.
"#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_CONNECTIONS"
Only a single handle can be open at any time, and all requests happen from one thread.
Note this means only one client can connect to the server at any time. If a second client tries to
connect it will block waiting for the first client to close the connection.
"#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_ALL_REQUESTS"
This is a safe default for most plugins.
Multiple handles can be open at the same time, but data requests are serialized so that for the
plugin as a whole only one read/write/etc request will be in progress at any time.
This is a useful setting if the library you are using is not thread-safe. However performance may
not be good.
"#define THREAD_MODEL NBDKIT_THREAD_MODEL_SERIALIZE_REQUESTS"
Multiple handles can be open and multiple data requests can happen in parallel. However only one
request will happen per handle at a time (but requests on different handles might happen
concurrently).
"#define THREAD_MODEL NBDKIT_THREAD_MODEL_PARALLEL"
Multiple handles can be open and multiple data requests can happen in parallel (even on the same
handle).
All the libraries you use must be thread-safe and reentrant. You may also need to provide mutexes
for fields in your connection handle.
If none of the above thread models are suitable, then use "NBDKIT_THREAD_MODEL_PARALLEL" and implement
your own locking using "pthread_mutex_t" etc.
PARSING SIZE PARAMETERS
Use the "nbdkit_parse_size" utility function to parse human-readable size strings such as "100M" into the
size in bytes.
int64_t nbdkit_parse_size (const char *str);
"str" can be a string in a number of common formats. The function returns the size in bytes. If there
was an error, it returns "-1".
DEBUGGING
Run the server with -f and -v options so it doesn't fork and you can see debugging information:
nbdkit -fv myplugin.so [key=value [key=value [...]]]
To print debugging information from within the plugin, call "nbdkit_debug", which has the following
prototype and works like printf(3):
void nbdkit_debug (const char *fs, ...);
Note that "nbdkit_debug" only prints things when the server is in verbose mode (-v option).
SEE ALSO
nbdkit(1), nbdkit-example1-plugin(1), nbdkit-example2-plugin(1), nbdkit-example3-plugin(1).
AUTHORS
Richard W.M. Jones
COPYRIGHT
Copyright (C) 2013 Red Hat Inc.
LICENSE
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
• Redistributions of source code must retain the above copyright notice, this list of conditions and
the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of Red Hat nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY RED HAT AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RED HAT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.