NAME

       Node Classes -

   Classes
       class SoGeoCoordinate
           The SoGeoCoordinate class is used to specify a list of geographical coordinates.

       FILE FORMAT/DEFAULTS: "
   class SoGeoLocation
       The SoGeoLocation class is used to georeference the following nodes.

       FILE FORMAT/DEFAULTS: "
   class SoGeoOrigin
       The SoGeoOrigin class is used to specify an absolute geographic location against which geometry is
       referenced.

       FILE FORMAT/DEFAULTS: "
   class SoGeoSeparator
       The SoGeoSeparator class is used to georeference a scene graph.

       FILE FORMAT/DEFAULTS: "
   class SoAnnotation
       The SoAnnotation node draws all its child geometry on top of other geometry.

       This group-type node uses delayed rendering in combination with Z-buffer disabling to let its children
       transparently render their geometry on top of the other geometry in the scene. "
   class SoAntiSquish
       The SoAntiSquish class is used to reset to uniform scaling.

       When traversed, this node replaces the scale vector of the matrix with uniform values, based on one of
       the SoAntiSquish::Sizing strategies. "
   class SoArray
       The SoArray class is a group node for setting up regular arrays of subgraphs.

       SoArray presents a convenient way of duplicating a node (typically a shape node) or a complete subgraph
       in 1 to 3 dimensions. "
   class SoBaseColor
       The SoBaseColor class provides a node type for convenient setting of the base material color.

       If you want to just set the diffuse color of the following geometry, you can use this node for
       simplicity. "
   class SoBlinker
       The SoBlinker class is a cycling switch node.

       This switch node cycles its children SoBlinker::speed number of times per second. If the node has only
       one child, it will be cycled on and off. Cycling can be turned off using the SoBlinker::on field, and the
       node then behaves like a normal SoSwitch node. "
   class SoBumpMapCoordinate
       The SoBumpMapCoordinate class is a node for providing bump map coordinates to shape nodes.

       When encountering nodes of this type during traversal, the coordinates it contains will be put on the
       state stack for later use by shape nodes. The bump map coordinates can be used to specify explicit
       coordinates for a bump map. The SoBumpMap node is used to specify a bump map for the shape nodes. "
   class SoBumpMap
       The SoBumpMap class is used to map a bump map onto subsequent shapes.

       SoBumpMap has support for two types of maps. If the image is a three component (RGB) image, it will be
       treated as a normal map, where the red image component equals the X normal component, green equals Y, and
       blue is Z. See http://www.paulsprojects.net/tutorials/simplebump/simplebump.html for a nice introduction
       about bump mapping and normal maps. "
   class SoBumpMapTransform
       The SoBumpMapTransform class is used to define 2D bump map transformations.

       Bump maps applied to shapes in the scene can be transformed by 'prefixing' in the state with instances of
       this node type. Translations, rotations and scaling in 2D can all be done. "
   class SoCacheHint
       The SoCacheHint class is a node containing hints about how to cache geometry.

       The SoCacheHint node is used to set up clues to the rendering subsystem about how Coin should cache
       vertex data. "
   class SoCallback
       The SoCallback class is a node type which provides a means of setting callback hooks in the scene graph.

       By inserting SoCallback nodes in a scene graph, the application programmer can set up functions to be
       executed at certain points in the traversal. "
   class SoCamera
       The SoCamera class is the abstract base class for camera definition nodes.

       To be able to view a scene, one needs to have a camera in the scene graph. A camera node will set up the
       projection and viewing matrices for rendering of the geometry in the scene. "
   class SoClipPlane
       The SoClipPlane class is a node type for specifying clipping planes.

       A scene graph without any SoClipPlane nodes uses six clipping planes to define the viewing frustum: top,
       bottom, left, right, near and far. If you want extra clipping planes for 'slicing' the visible geometry,
       you can do that by using nodes of this type. Geometry on the back side of the clipping plane is clipped
       away. "
   class SoColorIndex
       The SoColorIndex class is used to specify color indices for subsequent shapes.

       This node should only be used in OpenGL color-index mode, and only when the current light model is set to
       SoLightModel::BASE_COLOR. "
   class SoComplexity
       The SoComplexity class is a node type which is used to set the tradeoff between quality and performance.

       By inserting SoComplexity nodes in the scene graph, you can control the accuracy by which complex shapes
       are rendered and the quality of the texture mapping used for geometry in the scene. "
   class SoCoordinate3
       The SoCoordinate3 class is a node for providing coordinates to shape nodes.

       When encountering nodes of this type during traversal, the coordinates it contains will be put on the
       state stack for later use by shape nodes of types which needs coordinate sets (like SoFaceSet nodes or
       SoPointSet nodes). "
   class SoCoordinate4
       The SoCoordinate4 class is a node for providing coordinates to shape nodes.

       When encountering nodes of this type during traversal, the coordinates it contains will be put on the
       statestack for later use by shape nodes of types which needs coordinate sets (like SoFaceSet nodes or
       SoPointSet nodes). "
   class SoDepthBuffer
       The SoDepthBuffer class is a node used to control the GL depth buffer.
   class SoDirectionalLight
       The SoDirectionalLight class is a node type for specifying directional light sources.

       A directional light source provides a model of light sources which are at infinite distance from the
       geometry it illuminates, thereby having no set position and consisting of an infinite volume of parallel
       rays. "
   class SoDrawStyle
       The SoDrawStyle class specificies common rendering properties for shapes.

       Use SoDrawStyle nodes to influence how shape nodes following them in the scenegraph will be rendered.
       This node type have fields to help decide how certain aspects of point-based shapes, line-based shapes
       and filled shape primitives are rendered. "
   class SoEnvironment
       The SoEnvironment class is a node for specifying global rendering parameters.

       This node type provides the application programmer with the ability to set global parameters influencing
       lighting and fog. "
   class SoEventCallback
       The SoEventCallback class provides functionality for catching events.

       Use SoEventCallback nodes in the scenegraph for catching user interaction events with the scenegraph's
       render canvas. "
   class SoExtSelection
       The SoExtSelection class can be used for extended selection functionality.

       This class enables you to select geometry by specifying a lasso (a polygon) or a rectangle on screen.
       When objects are selected, you'll receive the same callbacks as for the SoSelection node. "
   class SoFile
       The SoFile class is node container for another model file.

       This node provides a way to split your models into a set of 'component' models to include into larger
       'master' files. "
   class SoFont
       The SoFont class is an appearance node for setting fonts.

       Successive text rendering nodes (like SoText2, SoText3, SoAsciiText, etc) will use the font specified
       from an SoFont node when visualizing text. "
   class SoFontStyle
       The SoFontStyle class changes the appearance of fonts for text rendering nodes.

       Successive text rendering nodes will use fonts with the style settings of this node, if a font with the
       given settings can be found and loaded from the system. "
   class SoFrustumCamera
       The SoFrustumCamera class defines a camera with a generic frustum..
   class SoGroup
       The SoGroup class is a node which managed other node instances.

       The internal scene data structures in Coin are managed as directed graphs. The graphs are built by
       setting up a hierarchy through the use of group nodes (either of this type, or from subclasses like
       SoSeparator) which is then traversed when applying actions (like SoGLRenderAction) to it. "
   class SoInfo
       The SoInfo class is a node for holding text information.

       This is simply a placeholder for textual information about a scene. Typically used for specifying author
       and copyright information in Inventor format files, but can also be used for other purposes, of course. "
   class SoLabel
       The SoLabel class is a node for holding label information in a scene graph.

       Use this node as a convenient way of labeling nodes or subgraphs within a scene graph. "
   class SoLevelOfDetail
       The SoLevelOfDetail class is used to choose a child based on projected size.

       A level-of-detail mechanism is typically used by application programmers to assist the library in
       speeding up the rendering. "
   class SoLight
       The SoLight class is the base class for light emitting nodes.

       This node type is abstract and does not in itself provide any light sources to the scene, you need to use
       one of its subclasses. "
   class SoLightModel
       The SoLightModel class is a node for specifying the model for geometry lighting.

       Use nodes of this type to set up how lighting should affect subsequent geometry in the scene. "
   class SoLinearProfile
       The SoLinearProfile class is a node for specifying linear profile curves.

       Use nodes of this type if you want to set up profiles that are simply straight lines connected by control
       points. "
   class SoListener
       The SoListener class defines listener attributes used when rendering sound.

       When rendering geometry, one needs to have a camera defining certain attributes related to vieweing. The
       SoListener plays a similar role when it comes to rendering audio. "
   class SoLocateHighlight
       The SoLocateHighlight class highlights geometry under the cursor.

       Note: this node is supposed to draw to the front buffer. However, in Coin we always draw to the back
       buffer, forcing a scene redraw whenever a highlight state changes. "
   class SoLOD
       The SoLOD class is used to choose a child based distance between viewer and object.

       The class documentation for the SoLOD node class would be similar enough to that of SoLevelOfDetail that
       we will refer you to look at that one first. It will explain the general principles of what a level-of-
       detail mechanism is, and why and how to use it. "
   class SoMaterialBinding
       The SoMaterialBinding class is a node for setting up how materials are mapped to shapes.

       The material binding specified in nodes of this type decides how the material values of SoMaterial nodes
       are mapped on the builtin geometry shape nodes. "
   class SoMaterial
       The SoMaterial class is a node type for setting up material values for scene geometry.

       After traversing an SoMaterial node, subsequent shape nodes with geometry in the scene graph will use
       values from the material 'pool' of the traversal state set up from nodes of this type. "
   class SoMatrixTransform
       The SoMatrixTransform class is a transformation node.

       This class is the most flexible transformation node, as you can use it to accumulate any kind of
       transformation matrix on top of the current model transformation matrix. "
   class SoMultipleCopy
       The SoMultipleCopy class redraws it's children multiple times at different transformations.

       The SoMultipleCopy group node duplicates it's children nodes / subgraphs without using additional memory
       resources. "
   class SoNode
       The SoNode class is the base class for nodes used in scene graphs.

       Coin is a retained mode 3D visualization library (built on top of the immediate mode OpenGL library).
       'Retained mode' means that instead of passing commands to draw graphics primitives directly to the
       renderer, you build up data structures which are rendered by the library on demand. "
   class SoNormalBinding
       The SoNormalBinding class is a node for specifying normal vector bindings.

       Use nodes of this type to specify how to map normal vectors from SoNormal nodes in the scene graph to
       shape nodes. "
   class SoNormal
       The SoNormal class is a node for providing normals to the state.

       Coin will automatically calculate normals for you if no SoNormal nodes are present in the scene graph,
       but explicitly setting normals is useful for at least two purposes: 1) a potential increase in
       performance, 2) you can calculate and use 'incorrect' normals to do various special effects. "
   class SoNurbsProfile
       The SoNurbsProfile class is a node for specifying smooth profile curves.

       Use nodes of this type if you want to set up profiles that are smooth curves. "
   class SoOrthographicCamera
       The SoOrthographicCamera class defines a camera node with orthographic rendering.

       Orthographic rendering will not give a particularly realistic impression of the scene, but non-realistic
       rendering is for various reasons widely used in applications for e.g. Computer Aided Design. "
   class SoPackedColor
       The SoPackedColor class is a node for setting diffuse and transparency material values.

       This node provides a convenient way of setting diffuse colors and transparency values with packed 32-bit
       RGBA vectors. "
   class SoPathSwitch
       The SoPathSwitch class traverses only when current path matches a configurable path.

       FILE FORMAT/DEFAULTS: "
   class SoPendulum
       The SoPendulum class is used to create oscillating rotations.

       A smooth transition between rotation0 and rotation1 is created using a cosine function. In the beginning
       of the cycle, rotation0 is used. Halfway through the cycle, the resulting rotation equals rotation1, and
       at the end of the cycle, we're at rotation0 again. "
   class SoPerspectiveCamera
       The SoPerspectiveCamera class defines a camera node with perspective rendering.

       For realistic looking 3D scene, the geometry should be rendered with perspective calculations. Use this
       camera type to accomplish this. "
   class SoPickStyle
       The SoPickStyle class is a node for setting up how to do picking.

       By default, all geometry in a scene is available for picking. Upon writing applications with interaction
       possibilities, this is often not what you want. To exclude parts of the scene graph from pick actions,
       use the SoPickStyle::UNPICKABLE. "
   class SoPointLight
       The SoPointLight class is a node type for light sources.

       Pointlights emits light equally in all directions from a specified 3D location. "
   class SoPolygonOffset
       The SoPolygonOffset class is a node type for 'layering' rendering primitives.

       A common problem with realtime 3D rendering systems is that rendered primitives which are at
       approximately the same depth with regard to the camera viewpoint will appear to flicker. I.e.: from one
       angle one primitive will appear to be closer, while at another angle, another primitive will appear
       closer. When this happens, the rendered graphics at that part of the scene will of course look a lot less
       visually pleasing. "
   class SoProfileCoordinate2
       The SoProfileCoordinate2 class is a node specifying a set of 2D coordinates for profiles.

       Use nodes of this type to provide coordinates to profiles. "
   class SoProfileCoordinate3
       The SoProfileCoordinate3 class is a node specifying a set of 3D coordinates for profiles.

       Use nodes of this type to provide coordinates to profiles. "
   class SoProfile
       The SoProfile class is the abstract superclass for profile definitions.

       Node subclasses of SoProfile specifies profiles for extruded 3D text and nurbs surface data. "
   class SoResetTransform
       The SoResetTransform class is a node type which makes it possible to 'nullify' state during traversal.

       SoResetTransform is useful for setting up geometry in the scene graph which will not be influenced by the
       transformation nodes before it during traversal. "
   class SoRotation
       The SoRotation class specifies a rotation transformation.

       Use nodes of this class type to re-orient geometry data within the scene graph. "
   class SoRotationXYZ
       The SoRotationXYZ class is a node type for specifying rotation around a particular axis.

       Application programmers can use nodes of this type instead of SoRotation nodes for simplicity and clarity
       if the rotation will only happen around one particular axis. "
   class SoRotor
       The SoRotor class is a node used to animate rotations.

       Insert this node in your hierarchy to apply a continuous rotation to some geometry. Since this node
       inherits the SoRotation node, rotation is restricted around the axis specified in the rotation field. "
   class SoScale
       The SoScale class is a node type for scaling scene graph geometry.

       Use nodes of this type to apply scaling operations during scenegraph traversals for e.g. rendering. Scale
       values are specified in a triple-value vector, with one scale factor for each of the 3 principal axes. "
   class SoSceneTexture2
       The SoSceneTexture2 class is used to create a 2D texture from a Coin scene graph.

       Lets the rendering of a scene graph be specified as a texture image to be used in another scene graph.
       Set up the scene graph used for a texture in the SoSceneTexture2::scene field. "
   class SoSceneTextureCubeMap
       Renders a scene into a texture cube map.
   class SoSelection
       The SoSelection class manages a list of selected nodes.

       Inserting an SoSelection node in your scene graph enables you to let the user 'pick' with the left
       mousebutton to select/deselect objects below the SoSelection node. "
   class SoSeparator
       The SoSeparator class is a state-preserving group node.

       Subgraphs parented by SoSeparator nodes will not affect the state, as they push and pop the traversal
       state before and after traversal of its children. "
   class SoShapeHints
       The SoShapeHints class is a node containing hints about how to render geometry.

       The SoShapeHints node is used to set up clues to the rendering subsystem about how particular aspects of
       the subsequent geometry in the scene graph should be drawn. "
   class SoShuttle
       The SoShuttle class is used to oscillate between two translations.

       A smooth transition between translation0 and translation1 is created using a cosine function. In the
       beginning of the cycle, translation0 is used. Halfway through the cycle, the resulting translation equals
       translation1, and at the end of the cycle, we're at translation0 again. "
   class SoSpotLight
       The SoSpotLight class is a node type for light sources with a cone shaped lightvolume.

       Spotlights are light sources with a position and a direction. They can be thought of as a pointlight with
       a lampshade. "
   class SoSurroundScale
       The SoSurroundScale class is used to automatically scale geometry to surround other geometry.

       This node calculates a transformation (a translation and a scale) which will, when the node is traversed,
       be appended to the current model matrix, making a default cube placed directly to the right of this node
       in the graph surround geometry to the right of the container branch this node is on. The container is
       specified by the field SoSurroundScale::numNodesUpToContainer. "
   class SoSwitch
       The SoSwitch class is a group node which selects one child subgraph for traversal.

       Which child to traverse is controlled by the application programmer by using the SoSwitch::whichChild
       field. In addition to picking out a single child for traversal, it is also possible to flip all children
       on or off for traversal. "
   class SoTexture2
       The SoTexture2 class is used to map a 2D texture onto subsequent geometry in the scenegraph.

       Shape nodes within the scope of SoTexture2 nodes in the scenegraph (ie below the same SoSeparator and to
       the righthand side of the SoTexture2) will have the texture applied according to each shape type's
       individual characteristics. See the documentation of the various shape types (SoFaceSet, SoCube,
       SoSphere, etc etc) for information about the specifics of how the textures will be applied. "
   class SoTexture2Transform
       The SoTexture2Transform class is used to define 2D texture transformations.

       Textures applied to shapes in the scene can be transformed by 'prefixing' in the state with instances of
       this node type. Translations, rotations and scaling in 2D can all be done. "
   class SoTexture3
       The SoTexture3 class is used to map a 3D texture onto geometry.

       Shape nodes within the scope of SoTexture3 nodes in the scenegraph (ie below the same SoSeparator and to
       the righthand side of the SoTexture3) will have the texture applied according to each shape type's
       individual characteristics. See the documentation of the various shape types (SoFaceSet, SoCube,
       SoSphere, etc etc) for information about the specifics of how the textures will be applied. An SoTexture3
       node will override any previous encountered SoTexture2 nodes and vice versa. Mixing of SoTexture3 and
       SoTextureCoordinate2 (or the other way around) is legal, but the third texture coordinate component will
       be ignored (set to 0.0). "
   class SoTexture3Transform
       The SoTexture3Transform class is used to define 3D texture transformations.

       Textures applied to shapes in the scene can be transformed by 'prefixing' in the state with instances of
       this node type. Translations, rotations and scaling in 3D can all be done. "
   class SoTextureCombine
       The SoTextureCombine class is a node for setting texture combine functions.

       This node is more or less an exact mapping of the OpenGL ARB_texture_env_combine extension (included in
       OpenGL in OpenGL v1.3). See http://oss.sgi.com/projects/ogl-sample/registry/ARB/texture_env_combine.txt
       for more information about this extension. "
   class SoTextureCoordinate2
       The SoTextureCoordinate2 class contains a set of coordinates for the mapping of 2D textures.

       When encountering nodes of this type during traversal, the coordinates it contains will be put on the
       state stack. Some shape nodes (for instance SoIndexedFaceSet, among many others) can then use these
       coordinates for explicit, detailed control of how textures are mapped to it's surfaces. "
   class SoTextureCoordinate3
       The SoTextureCoordinate3 class contains a set of coordinates for the mapping of 2D textures.

       When encountering nodes of this type during traversal, the coordinates it contains will be put on the
       state stack. Some shape nodes can then use these coordinates for explicit, detailed control of how 3D
       textures are mapped. "
   class SoTextureCoordinateBinding
       The SoTextureCoordinateBinding class says how texture coordinates should be bound to shapes.

       SoTextureCoordinateBinding binds current coordinates to subsequent shapes by using either per vertex or
       per indexed vertex binding. "
   class SoTextureCoordinateCube
       The SoTextureCoordinateCube class autogenerates cubemapped texture coordinated for shapes.

       The cube used for reference when mapping is the boundingbox for the shape. "
   class SoTextureCoordinateCylinder
       The SoTextureCoordinateCylinder class autogenerates cylinder mapped texture coordinated for shapes.

       FILE FORMAT/DEFAULTS: "
   class SoTextureCoordinateDefault
       The SoTextureCoordinateDefault class removes texture coordinates from the state.

       Shapes below this node in the scenegraph will have to use its default texture coordinates as
       SoTextureCoordinateDefault cleans out all previously defined texture coordinates and texture coordinate
       functions. "
   class SoTextureCoordinateEnvironment
       The SoTextureCoordinateEnvironment class generates texture coordinates by projecting onto a surrounding
       texture.

       The texture specifying the enviroment will be mapped around the scenegraph below this node using a
       sphere. The texture will be mapped onto the scenegraph taking camera position into account. This will
       lead to an object reflecting its enviroment. "
   class SoTextureCoordinateFunction
       The SoTextureCoordinateFunction class is an abstract base class for texture coordinate generating nodes

       Classes reimplementing SoTextureCoordinateFunction generate texture coordinates by projecting object
       space surface points using some function. "
   class SoTextureCoordinateNormalMap
       The SoTextureCoordinateNormalMap class generates texture coordinates by projecting onto a surrounding
       texture.

       The texture specifying the enviroment will be mapped around the scenegraph below this node using a
       sphere. The texture will be mapped onto the scenegraph taking camera position into account. This will
       lead to an object reflecting its enviroment. "
   class SoTextureCoordinateObject
       The SoTextureCoordinateObject class generates texture coordinates by...

       FIXME: not implemented yet. pederb, 2005-04-20. "
   class SoTextureCoordinatePlane
       The SoTextureCoordinatePlane class generates texture coordinates by projecting onto a plane.

       SoTextureCoordinatePlane is used for generating texture coordinates by projecting the object onto a
       texture plane. The s, t and r texture coordinates are computed as the distance from the origin to the
       projected point, in the respective directions. The texture plane is specified using two direction
       vectors, given as SoTextureCoordinatePlane::directionS and SoTextureCoordinatePlane::directionT in object
       space coordinates. SoTextureCoordinatePlane::directionR is used for generating the third coordinate, and
       can be used for generating texture coordinate for 3D textures. For 2D textures you can just leave this
       field alone. "
   class SoTextureCoordinateReflectionMap
       The SoTextureCoordinateReflectionMap class generates 3D reflection texture coordinates.

       This node is usually used along with a SoCubeMapTexture node... "
   class SoTextureCoordinateSphere
       The SoTextureCoordinateSphere class autogenerates spheremapped texture coordinated for shapes.

       FILE FORMAT/DEFAULTS: "
   class SoTextureCubeMap
       The SoTextureCubeMap class is used to map a cube map onto subsequent shape nodes.

       Shape nodes within the scope of SoTextureCubeMap nodes in the scenegraph (ie below the same SoSeparator
       and to the righthand side of the SoTextureCubeMap) will have the texture applied according to each shape
       type's individual characteristics. See the documentation of the various shape types (SoFaceSet, SoCube,
       SoSphere, etc etc) for information about the specifics of how the textures will be applied. "
   class SoTextureMatrixTransform
       The SoTextureMatrixTransform class is used to define a texture matrix transformation.

       Textures applied to shapes in the scene can be transformed by 'prefixing' in the state with instances of
       this node type. "
   class SoTextureScalePolicy
       The SoTextureScalePolicy class is a node for controlling the texture scale policy.

       If a texture map is of size != 2^n, it must be scaled before OpenGL can handle it. This node enables you
       to control how/if textures are scaled before it is sent to OpenGL. "
   class SoTextureUnit
       The SoTextureUnit class is a node for setting the active texture unit.

       When an SoTextureUnit node is inserted into the scene graph, all subsequent texture nodes (SoTexture2,
       SoTextureCoordinate2, SoTextureCoordinate3, SoTexture2Transform, SoTexture3Transform,
       SoTextureCoordinateEnvironment, SoTextureCoordinatePlane and SoComplexity) will affect the texture unit
       set in the unit field. "
   class SoTransformation
       The SoTransformation class is the abstract base class for transformation nodes.

       To position and orient geometry within the 3D world space, various node types for transformations are
       used. These nodes all inherit the SoTransformation base class. "
   class SoTransform
       The SoTransform class is the 'all-purpose' transformation node type.

       Like SoMatrixTransform, nodes of this type gives the application programmer maximum flexibility when
       specifying geometry transformations in a scene graph. If you want to set and keep the various components
       of the transformation matrix in separate entities, this node type is preferable, though. "
   class SoTransformSeparator
       The SoTransformSeparator class is a group node preserving the current transformations.

       This node works like the SoSeparator group node, except that it only stores and restores the current
       model matrix transformation. Other appearance settings, like materials, textures, cameras, lights, etc,
       will affect the remaining parts of the scenegraph after traversal, just like as for the SoGroup node. "
   class SoTranslation
       The SoTranslation class is a node type for specifying geometry translations.

       For simply translating some geometry in a scene graph, you can use this node type. "
   class SoTransparencyType
       The SoTransparencyType class is a node for setting the transparency type for shapes.

       In earlier versions of Coin/Open Inventor it was only possible to set the transparency mode globally for
       an entire scene graph, which could be inconvenient if different transparency types was wanted for
       different shapes. "
   class SoUnits
       The SoUnits class is a node for setting unit types.

       Even though Coin doesn't care what units you are using in your scene graph per se, there's an advantage
       to using SoUnits nodes: you have a way to split your scene graph into different 'conceptual' parts. "
   class SoVertexProperty
       The SoVertexProperty class collects the functionality of various appearance nodes.

       Instead of reading data from the current state stack of the scenegraph traversal, nodes inheriting
       SoVertexShape can be set up with an SoVertexProperty node in the SoVertexShape::vertexProperty field.
       Coordinates, normals, texture coordinates and material / color information will then be fetched from the
       vertexshape's SoVertexProperty node instead of from the state stack. "
   class SoWWWAnchor
       The SoWWWAnchor class adds URL callbacks to the highlighted geometry.

       In addition to highlighting geometry under the cursor, the application programmer can set callbacks. It
       is possible to set one callback for picking, the fetch callback, and one callback for highlighting. "
   class SoWWWInline
       The SoWWWInline class is a node used to include data from an URL.

       If the URL is not a local file, the application is responsible for supplying a callback to a function
       which will fetch the data of the URL. "
   class SoFragmentShader
       The SoFragmentShader class is used for setting up fragment shader programs.

       See Shaders in Coin  for more information on how to set up a scene graph with shaders. "
   class SoGeometryShader
       The SoGeometryShader class is used for loading geometry shader programs.

       See Shaders in Coin  for more information on how to set up a scene graph with shaders. "
   class SoVertexShader
       The SoVertexShader class is used for setting up vertex shader programs.

       See Shaders in Coin  for more information on how to set up a scene graph with shaders. "
   class SoShadowCulling
       The SoShadowCulling class is a node for setting the shadow style on nodes.
   class SoShadowSpotLight
       The SoShadowSpotLight class is a node for setting up a spot light which casts shadows.
   class SoShadowStyle
       The SoShadowStyle class is a node for setting the shadow style on nodes.
   class SoAsciiText
       The SoAsciiText class renders flat 3D text.

       The text is rendered using 3D polygon geometry. "
   class SoCone
       The SoCone class is for rendering cone shapes.

       Insert a cone shape into the scenegraph. The cone is rendered with the current material, texture and
       drawstyle settings (if any, otherwise the default settings are used). "
   class SoCube
       The SoCube class is for rendering cubes.

       Insert a cube shape into the scenegraph. The cube is rendered with the current material, texture and
       drawstyle settings (if any, otherwise the default settings are used). "
   class SoCylinder
       The SoCylinder class is for rendering cylinder shapes.

       Insert a cylinder shape into the scenegraph. The cylinder is rendered with the current material, texture
       and drawstyle settings (if any, otherwise the default settings are used). "
   class SoFaceSet
       The SoFaceSet class is used to render and organize non-indexed polygonal face data.

       Faces are specified using the numVertices field. Coordinates, normals, materials and texture coordinates
       are fetched in order from the current state or from the vertexProperty node if set. For example, if
       numVertices is set to [3, 4, 5, 3], this node would specify a triangle from coordinates 0, 1 and 2, a
       quad from coordinates 3, 4, 5 and 6, a polygon from coordinates 7, 8, 9, 10 and 11 and finally a triangle
       from coordinates 12, 13, 14. "
   class SoImage
       The SoImage class draws a 2D image on the viewport.

       An image can be specified either by using the image field, or by specifying a filename. If width and or
       height is specified, the image will be resized to match those values before it is displayed. "
   class SoIndexedFaceSet
       The SoIndexedFaceSet class is used to handle generic indexed facesets.

       Faces are specified using the coordIndex field. Each face must be terminated by a negative (-1) index.
       Coordinates, normals, materials and texture coordinates from the current state (or from the
       vertexProperty node if set), can be indexed to create triangles, quads or polygons. "
   class SoIndexedLineSet
       The SoIndexedLineSet class is used to render and otherwise represent indexed lines.

       The indexed counterpart of SoLineSet. Lines can specified using indices for coordinates, normals,
       materials and texture coordinates. "
   class SoIndexedMarkerSet
       The SoIndexedMarkerSet class is used to display a set of bitmap markers at 3D positions.

       This node either uses the coordinates currently on the state (typically set up by a leading SoCoordinate3
       node in the scenegraph) or from a SoVertexProperty node attached to this node to render a set of 3D
       points. "
   class SoIndexedNurbsCurve
       The SoIndexedNurbsCurve class is a node for representing smooth curves.

       Explaining NURBS is beyond the scope of this documentation. If you are unfamiliar with the principles of
       representing smooth curves and surfaces when doing 3D visualization, we recommend finding a good book on
       the subject. "
   class SoIndexedNurbsSurface
       The SoIndexedNurbsSurface class can be used to render NURBS surfaces.

       It is very similar to the SoNurbsSurface class, but controlpoints can be specified using indices. "
   class SoIndexedPointSet
       The SoIndexedPointSet class is used to display a set of 3D points.

       This node either uses the coordinates currently on the state (typically set up by a leading SoCoordinate3
       node in the scenegraph) or from a SoVertexProperty node attached to this node to render a set of 3D
       points. "
   class SoIndexedShape
       The SoIndexedShape class is the superclass for all indexed vertex shapes.

       This is an abstract class which contains storage for four fields for indices to coordinates, normals,
       materials and texture coordinates for it's subclasses. "
   class SoIndexedTriangleStripSet
       The SoIndexedTriangleStripSet class keeps data for rendering and otherwise representing triangle strips.

       Use nodes of this type as an effective way of drawing triangles which are strung together. "
   class SoLineSet
       The SoLineSet class is used to render and organize non-indexed polylines.

       Polylines are specified using the numVertices field. Coordinates, normals, materials and texture
       coordinates are fetched in order from the current state or from the vertexProperty node if set. For
       example, if numVertices is set to [3, 4, 2], this node would specify a line through coordinates 0, 1 and
       2, a line through coordinates 3, 4, 5 and 6, and finally a single line segment between coordinates 7 and
       8. "
   class SoMarkerSet
       The SoMarkerSet class displays a set of 2D bitmap markers in 3D.

       This node uses the coordinates currently on the state (or in the vertexProperty field) in order. The
       numPoints field specifies the number of points in the set. "
   class SoNonIndexedShape
       The SoNonIndexedShape class is the superclass for all non-indexed vertex based shapes.

       It contains the (now obsoleted) startIndex field and a convenience method for calculating the bounding
       box. "
   class SoNurbsCurve
       The SoNurbsCurve class is a node for representing smooth curves.

       A general explanation of NURBS is beyond the scope of the Coin documentation. For detailed information,
       refer to the specialized literature on the topic (for example 'An Introduction to NURBS: With Historical
       Perspective' by David F. Rogers). A basic overview of curve and surface rendering using NURBS can be
       found in chapter 8 of 'The Inventor Mentor'. "
   class SoNurbsSurface
       The SoNurbsSurface class is used to render smooth surfaces.

       A general explanation of NURBS is beyond the scope of the Coin documentation. For detailed information,
       refer to the specialized literature on the topic (for example 'An Introduction to NURBS: With Historical
       Perspective' by David F. Rogers). A basic overview of curve and surface rendering using NURBS can be
       found in chapter 8 of 'The Inventor Mentor'. "
   class SoPointSet
       The SoPointSet class is used to display a set of 3D points.

       This node either uses the coordinates currently on the state (typically set up by a leading SoCoordinate3
       node in the scenegraph) or from a SoVertexProperty node attached to this node to render a set of 3D
       points. "
   class SoQuadMesh
       The SoQuadMesh class is used to render and optimize a quadrilateral mesh.

       This node uses the coordinates in order, either from the state or from the SoQuadMesh::vertexProperty
       node, to construct a quadrilateral mesh. "
   class SoShape
       The SoShape class is the superclass for geometry shapes.

       The node types which have actual geometry to render inherits this class. For convenience, the SoShape
       class contains various common code used by the subclasses. "
   class SoSphere
       The SoSphere class is for rendering sphere shapes.

       Renders a sphere with the size given by the SoSphere::radius field. The sphere is rendered with the
       current material, texture and drawstyle settings (if any, otherwise the default settings are used). "
   class SoText2
       The SoText2 class is a node type for visualizing 2D text aligned with the camera plane.

       SoText2 text is not scaled according to the distance from the camera, and is not influenced by rotation
       or scaling as 3D primitives are. If these are properties that you want the text to have, you should
       instead use an SoText3 or SoAsciiText node. "
   class SoText3
       The SoText3 class renders extruded 3D text.

       Render text as 3D geometry. "
   class SoTriangleStripSet
       The SoTriangleStripSet class is used to render and control non-indexed triangle strips.

       Triangle strips are specified using the numVertices field. "
   class SoVertexShape
       The SoVertexShape class is the superclass for all vertex based shapes.

       Basically, every polygon-, line- or point-based shape will inherit this class. It contains methods for
       organizing the normal cache, and also holds the SoVertexShape::vertexProperty field which can be used to
       set vertex data inside the node. "

   Macros
       #define SO_NODE_HEADER(classname)
       #define SO_NODE_ABSTRACT_HEADER(classname)
       #define SO_NODE_INIT_CLASS(classname, parentclass, parentname)
       #define SO_NODE_INIT_ABSTRACT_CLASS(classname, parentclass, parentname)
       #define SO_NODE_SOURCE(classname)
       #define SO_NODE_ABSTRACT_SOURCE(classname)
       #define SO_NODE_CONSTRUCTOR(classname)
       #define SO_NODE_IS_FIRST_INSTANCE()
       #define SO_NODE_ADD_FIELD(field, defaultvalue)
       #define SO_NODE_DEFINE_ENUM_VALUE(enumname, enumvalue)

   Functions
       static SoType SoTexture::getClassTypeId (void)
           Common base class for texture nodes.

Detailed Description

       This is the set of nodes Coin implements using the original Open Inventor pattern, meaning they read and
       write to and from files using the Inventor/VRML1 format, and produce side-effects for subsequent siblings
       under the same SoSeparator node during action traversal.

       A subset of these nodes constitute the VRML1 format, and a bigger subset constitutes the Inventor format.
       The rest of the nodes are extensions that are not part of any standardized format.

       For VRML97 nodes, see the VRML97 Classes page.

       The VRML1.0 specification is at http://www.web3d.org/x3d/specifications/vrml/VRML1.0/index.html

Macro Definition Documentation

   #define SO_NODE_HEADER(classname)
       This macro adds standard declarations needed in Coin nodes for object creation and type identification.

       See Also:
           SO_NODE_SOURCE

   #define SO_NODE_ABSTRACT_HEADER(classname)
       This macro adds standard declarations needed in Coin nodes for type identification. It differs from
       SO_NODE_HEADER in that the object creation part is omitted.

       See Also:
           SO_NODE_ABSTRACT_SOURCE

   #define SO_NODE_INIT_CLASS(classname, parentclass, parentname)
       This macro is used in the initClass-function in a node class. It registers the class by name (by creating
       a new SoType for the class), so file reading will be able to create a node of this type and fill it with
       its field values.

       See Also:
           SO_NODE_INIT_ABSTRACT_CLASS

   #define SO_NODE_INIT_ABSTRACT_CLASS(classname, parentclass, parentname)
       This macro is used in the initClass-function in abstract node classes. It registers the class by name (by
       creating a new SoType for the class) for type identification purposes.

       See Also:
           SO_NODE_INIT_CLASS

   #define SO_NODE_SOURCE(classname)
       This macro sets up the impementation of the declarations in SO_NODE_HEADER. It chould be placed in the
       implementation file for extension nodes.

       See Also:
           SO_NODE_HEADER

   #define SO_NODE_ABSTRACT_SOURCE(classname)
       This macro sets up the impementation of the declarations in SO_NODE_ABSTRACT_HEADER. It chould be placed
       in the implementation file for abstract extension nodes.

       See Also:
           SO_NODE_ABSTRACT_HEADER

   #define SO_NODE_CONSTRUCTOR(classname)
       Place this in the node constructor. It sets up the fielddata object for the node class.

   #define SO_NODE_IS_FIRST_INSTANCE()
       This macro can be used as a predicate to test if the constructed node is the first constructed instance
       of a node class, in case some extra initialization needs to be done that can't be done in the initClass()
       function.

   #define SO_NODE_ADD_FIELD(field, defaultvalue)
       This registers a field for a node, and sets its value to the default value. For use in the constructor,
       below the SO_NODE_CONSTRUCTOR macro.

   #define SO_NODE_DEFINE_ENUM_VALUE(enumname, enumvalue)
       This macro associates enum names with values, used for file input/output.

Function Documentation

   SoType SoTexture::getClassTypeId (void) [static]
       Common base class for texture nodes. SoTexture SoTexture.h Inventor/nodes/SoTexture.h

       Be aware that this class is an extension for Coin, and it is not available in the original SGI Open
       Inventor v2.1 API.

       Since:
           Coin 3.0

Author

       Generated automatically by Doxygen for Coin from the source code.

Version 4.0.0a                                   Wed Feb 26 2014                                 Node Classes(3)