Provided by: tcllib_1.15-dfsg-2_all 
NAME
pt::json_language - The JSON Grammar Exchange Format
SYNOPSIS
package require Tcl 8.5
_________________________________________________________________
DESCRIPTION
Are you lost ? Do you have trouble understanding this document ? In that case please
read the overview provided by the Introduction to Parser Tools. This document is the
entrypoint to the whole system the current package is a part of.
The json format for parsing expression grammars was written as a data exchange format not
bound to Tcl. It was defined to allow the exchange of grammars with PackRat/PEG based
parser generators for other languages.
It is formally specified by the rules below:
[1] The JSON of any PEG is a JSON object.
[2] This object holds a single key, pt::grammar::peg, and its value. This value holds
the contents of the grammar.
[3] The contents of the grammar are a JSON object holding the set of nonterminal
symbols and the starting expression. The relevant keys and their values are
rules The value is a JSON object whose keys are the names of the nonterminal
symbols known to the grammar.
[1] Each nonterminal symbol may occur only once.
[2] The empty string is not a legal nonterminal symbol.
[3] The value for each symbol is a JSON object itself. The relevant keys
and their values in this dictionary are
is The value is a JSON string holding the Tcl serialization of
the parsing expression describing the symbols sentennial
structure, as specified in the section PE serialization
format.
mode The value is a JSON holding holding one of three values
specifying how a parser should handle the semantic value
produced by the symbol.
value The semantic value of the nonterminal symbol is an
abstract syntax tree consisting of a single node node
for the nonterminal itself, which has the ASTs of the
symbol's right hand side as its children.
leaf The semantic value of the nonterminal symbol is an
abstract syntax tree consisting of a single node node
for the nonterminal, without any children. Any ASTs
generated by the symbol's right hand side are
discarded.
void The nonterminal has no semantic value. Any ASTs
generated by the symbol's right hand side are discarded
(as well).
start The value is a JSON string holding the Tcl serialization of the start
parsing expression of the grammar, as specified in the section PE
serialization format.
[4] The terminal symbols of the grammar are specified implicitly as the set of all
terminal symbols used in the start expression and on the RHS of the grammar rules.
As an aside to the advanced reader, this is pretty much the same as the Tcl serialization
of PE grammars, as specified in section PEG serialization format, except that the Tcl
dictionaries and lists of that format are mapped to JSON objects and arrays. Only the
parsing expressions themselves are not translated further, but kept as JSON strings
containing a nested Tcl list, and there is no concept of canonicity for the JSON either.
EXAMPLE
Assuming the following PEG for simple mathematical expressions
PEG calculator (Expression)
Digit <- '0'/'1'/'2'/'3'/'4'/'5'/'6'/'7'/'8'/'9' ;
Sign <- '-' / '+' ;
Number <- Sign? Digit+ ;
Expression <- Term (AddOp Term)* ;
MulOp <- '*' / '/' ;
Term <- Factor (MulOp Factor)* ;
AddOp <- '+'/'-' ;
Factor <- '(' Expression ')' / Number ;
END;
a JSON serialization for it is
{
"pt::grammar::peg" : {
"rules" : {
"AddOp" : {
"is" : "\/ {t -} {t +}",
"mode" : "value"
},
"Digit" : {
"is" : "\/ {t 0} {t 1} {t 2} {t 3} {t 4} {t 5} {t 6} {t 7} {t 8} {t 9}",
"mode" : "value"
},
"Expression" : {
"is" : "\/ {x {t (} {n Expression} {t )}} {x {n Factor} {* {x {n MulOp} {n Factor}}}}",
"mode" : "value"
},
"Factor" : {
"is" : "x {n Term} {* {x {n AddOp} {n Term}}}",
"mode" : "value"
},
"MulOp" : {
"is" : "\/ {t *} {t \/}",
"mode" : "value"
},
"Number" : {
"is" : "x {? {n Sign}} {+ {n Digit}}",
"mode" : "value"
},
"Sign" : {
"is" : "\/ {t -} {t +}",
"mode" : "value"
},
"Term" : {
"is" : "n Number",
"mode" : "value"
}
},
"start" : "n Expression"
}
}
and a Tcl serialization of the same is
pt::grammar::peg {
rules {
AddOp {is {/ {t -} {t +}} mode value}
Digit {is {/ {t 0} {t 1} {t 2} {t 3} {t 4} {t 5} {t 6} {t 7} {t 8} {t 9}} mode value}
Expression {is {x {n Term} {* {x {n AddOp} {n Term}}}} mode value}
Factor {is {/ {x {t (} {n Expression} {t )}} {n Number}} mode value}
MulOp {is {/ {t *} {t /}} mode value}
Number {is {x {? {n Sign}} {+ {n Digit}}} mode value}
Sign {is {/ {t -} {t +}} mode value}
Term {is {x {n Factor} {* {x {n MulOp} {n Factor}}}} mode value}
}
start {n Expression}
}
The similarity of the latter to the JSON should be quite obvious.
PEG SERIALIZATION FORMAT
Here we specify the format used by the Parser Tools to serialize Parsing Expression
Grammars as immutable values for transport, comparison, etc.
We distinguish between regular and canonical serializations. While a PEG may have more
than one regular serialization only exactly one of them will be canonical.
regular serialization
[1] The serialization of any PEG is a nested Tcl dictionary.
[2] This dictionary holds a single key, pt::grammar::peg, and its value. This
value holds the contents of the grammar.
[3] The contents of the grammar are a Tcl dictionary holding the set of
nonterminal symbols and the starting expression. The relevant keys and their
values are
rules The value is a Tcl dictionary whose keys are the names of the
nonterminal symbols known to the grammar.
[1] Each nonterminal symbol may occur only once.
[2] The empty string is not a legal nonterminal symbol.
[3] The value for each symbol is a Tcl dictionary itself. The
relevant keys and their values in this dictionary are
is The value is the serialization of the parsing
expression describing the symbols sentennial structure,
as specified in the section PE serialization format.
mode The value can be one of three values specifying how a
parser should handle the semantic value produced by the
symbol.
value The semantic value of the nonterminal symbol is
an abstract syntax tree consisting of a single
node node for the nonterminal itself, which has
the ASTs of the symbol's right hand side as its
children.
leaf The semantic value of the nonterminal symbol is
an abstract syntax tree consisting of a single
node node for the nonterminal, without any
children. Any ASTs generated by the symbol's
right hand side are discarded.
void The nonterminal has no semantic value. Any ASTs
generated by the symbol's right hand side are
discarded (as well).
start The value is the serialization of the start parsing expression of the
grammar, as specified in the section PE serialization format.
[4] The terminal symbols of the grammar are specified implicitly as the set of
all terminal symbols used in the start expression and on the RHS of the
grammar rules.
canonical serialization
The canonical serialization of a grammar has the format as specified in the
previous item, and then additionally satisfies the constraints below, which make it
unique among all the possible serializations of this grammar.
[1] The keys found in all the nested Tcl dictionaries are sorted in ascending
dictionary order, as generated by Tcl's builtin command lsort -increasing
-dict.
[2] The string representation of the value is the canonical representation of a
Tcl dictionary. I.e. it does not contain superfluous whitespace.
EXAMPLE
Assuming the following PEG for simple mathematical expressions
PEG calculator (Expression)
Digit <- '0'/'1'/'2'/'3'/'4'/'5'/'6'/'7'/'8'/'9' ;
Sign <- '-' / '+' ;
Number <- Sign? Digit+ ;
Expression <- Term (AddOp Term)* ;
MulOp <- '*' / '/' ;
Term <- Factor (MulOp Factor)* ;
AddOp <- '+'/'-' ;
Factor <- '(' Expression ')' / Number ;
END;
then its canonical serialization (except for whitespace) is
pt::grammar::peg {
rules {
AddOp {is {/ {t -} {t +}} mode value}
Digit {is {/ {t 0} {t 1} {t 2} {t 3} {t 4} {t 5} {t 6} {t 7} {t 8} {t 9}} mode value}
Expression {is {x {n Term} {* {x {n AddOp} {n Term}}}} mode value}
Factor {is {/ {x {t (} {n Expression} {t )}} {n Number}} mode value}
MulOp {is {/ {t *} {t /}} mode value}
Number {is {x {? {n Sign}} {+ {n Digit}}} mode value}
Sign {is {/ {t -} {t +}} mode value}
Term {is {x {n Factor} {* {x {n MulOp} {n Factor}}}} mode value}
}
start {n Expression}
}
PE SERIALIZATION FORMAT
Here we specify the format used by the Parser Tools to serialize Parsing Expressions as
immutable values for transport, comparison, etc.
We distinguish between regular and canonical serializations. While a parsing expression
may have more than one regular serialization only exactly one of them will be canonical.
Regular serialization
Atomic Parsing Expressions
[1] The string epsilon is an atomic parsing expression. It matches the
empty string.
[2] The string dot is an atomic parsing expression. It matches any
character.
[3] The string alnum is an atomic parsing expression. It matches any
Unicode alphabet or digit character. This is a custom extension of
PEs based on Tcl's builtin command string is.
[4] The string alpha is an atomic parsing expression. It matches any
Unicode alphabet character. This is a custom extension of PEs based
on Tcl's builtin command string is.
[5] The string ascii is an atomic parsing expression. It matches any
Unicode character below U0080. This is a custom extension of PEs
based on Tcl's builtin command string is.
[6] The string control is an atomic parsing expression. It matches any
Unicode control character. This is a custom extension of PEs based on
Tcl's builtin command string is.
[7] The string digit is an atomic parsing expression. It matches any
Unicode digit character. Note that this includes characters outside
of the [0..9] range. This is a custom extension of PEs based on Tcl's
builtin command string is.
[8] The string graph is an atomic parsing expression. It matches any
Unicode printing character, except for space. This is a custom
extension of PEs based on Tcl's builtin command string is.
[9] The string lower is an atomic parsing expression. It matches any
Unicode lower-case alphabet character. This is a custom extension of
PEs based on Tcl's builtin command string is.
[10] The string print is an atomic parsing expression. It matches any
Unicode printing character, including space. This is a custom
extension of PEs based on Tcl's builtin command string is.
[11] The string punct is an atomic parsing expression. It matches any
Unicode punctuation character. This is a custom extension of PEs
based on Tcl's builtin command string is.
[12] The string space is an atomic parsing expression. It matches any
Unicode space character. This is a custom extension of PEs based on
Tcl's builtin command string is.
[13] The string upper is an atomic parsing expression. It matches any
Unicode upper-case alphabet character. This is a custom extension of
PEs based on Tcl's builtin command string is.
[14] The string wordchar is an atomic parsing expression. It matches any
Unicode word character. This is any alphanumeric character (see
alnum), and any connector punctuation characters (e.g. underscore).
This is a custom extension of PEs based on Tcl's builtin command
string is.
[15] The string xdigit is an atomic parsing expression. It matches any
hexadecimal digit character. This is a custom extension of PEs based
on Tcl's builtin command string is.
[16] The string ddigit is an atomic parsing expression. It matches any
decimal digit character. This is a custom extension of PEs based on
Tcl's builtin command regexp.
[17] The expression [list t x] is an atomic parsing expression. It matches
the terminal string x.
[18] The expression [list n A] is an atomic parsing expression. It matches
the nonterminal A.
Combined Parsing Expressions
[1] For parsing expressions e1, e2, ... the result of [list / e1 e2 ... ]
is a parsing expression as well. This is the ordered choice, aka
prioritized choice.
[2] For parsing expressions e1, e2, ... the result of [list x e1 e2 ... ]
is a parsing expression as well. This is the sequence.
[3] For a parsing expression e the result of [list * e] is a parsing
expression as well. This is the kleene closure, describing zero or
more repetitions.
[4] For a parsing expression e the result of [list + e] is a parsing
expression as well. This is the positive kleene closure, describing
one or more repetitions.
[5] For a parsing expression e the result of [list & e] is a parsing
expression as well. This is the and lookahead predicate.
[6] For a parsing expression e the result of [list ! e] is a parsing
expression as well. This is the not lookahead predicate.
[7] For a parsing expression e the result of [list ? e] is a parsing
expression as well. This is the optional input.
Canonical serialization
The canonical serialization of a parsing expression has the format as specified in
the previous item, and then additionally satisfies the constraints below, which
make it unique among all the possible serializations of this parsing expression.
[1] The string representation of the value is the canonical representation of a
pure Tcl list. I.e. it does not contain superfluous whitespace.
[2] Terminals are not encoded as ranges (where start and end of the range are
identical).
EXAMPLE
Assuming the parsing expression shown on the right-hand side of the rule
Expression <- Term (AddOp Term)*
then its canonical serialization (except for whitespace) is
{x {n Term} {* {x {n AddOp} {n Term}}}}
BUGS, IDEAS, FEEDBACK
This document, and the package it describes, will undoubtedly contain bugs and other
problems. Please report such in the category pt of the Tcllib SF Trackers
[http://sourceforge.net/tracker/?group_id=12883]. Please also report any ideas for
enhancements you may have for either package and/or documentation.
KEYWORDS
EBNF, LL(k), PEG, TDPL, context-free languages, expression, grammar, matching, parser,
parsing expression, parsing expression grammar, push down automaton, recursive descent,
state, top-down parsing languages, transducer
CATEGORY
Parsing and Grammars
COPYRIGHT
Copyright (c) 2009 Andreas Kupries <andreas_kupries@users.sourceforge.net>