Provided by: manpages-posix-dev_2.16-1_all 
NAME
semop - XSI semaphore operations
SYNOPSIS
#include <sys/sem.h>
int semop(int semid, struct sembuf *sops, size_t nsops);
DESCRIPTION
The semop() function operates on XSI semaphores (see the Base Definitions volume of IEEE Std 1003.1-2001,
Section 4.15, Semaphore). It is unspecified whether this function interoperates with the realtime
interprocess communication facilities defined in Realtime .
The semop() function shall perform atomically a user-defined array of semaphore operations on the set of
semaphores associated with the semaphore identifier specified by the argument semid.
The argument sops is a pointer to a user-defined array of semaphore operation structures. The
implementation shall not modify elements of this array unless the application uses implementation-defined
extensions.
The argument nsops is the number of such structures in the array.
Each structure, sembuf, includes the following members:
Member Type Member Name Description
short sem_num Semaphore number.
short sem_op Semaphore operation.
short sem_flg Operation flags.
Each semaphore operation specified by sem_op is performed on the corresponding semaphore specified by
semid and sem_num.
The variable sem_op specifies one of three semaphore operations:
1. If sem_op is a negative integer and the calling process has alter permission, one of the following
shall occur:
* If semval(see <sys/sem.h>) is greater than or equal to the absolute value of sem_op, the absolute
value of sem_op is subtracted from semval. Also, if (sem_flg &SEM_UNDO) is non-zero, the absolute
value of sem_op shall be added to the calling process' semadj value for the specified semaphore.
* If semval is less than the absolute value of sem_op and (sem_flg &IPC_NOWAIT) is non-zero, semop()
shall return immediately.
* If semval is less than the absolute value of sem_op and (sem_flg &IPC_NOWAIT) is 0, semop() shall
increment the semncnt associated with the specified semaphore and suspend execution of the calling
thread until one of the following conditions occurs:
* The value of semval becomes greater than or equal to the absolute value of sem_op. When this
occurs, the value of semncnt associated with the specified semaphore shall be decremented, the
absolute value of sem_op shall be subtracted from semval and, if (sem_flg &SEM_UNDO) is non-
zero, the absolute value of sem_op shall be added to the calling process' semadj value for the
specified semaphore.
* The semid for which the calling thread is awaiting action is removed from the system. When this
occurs, errno shall be set equal to [EIDRM] and -1 shall be returned.
* The calling thread receives a signal that is to be caught. When this occurs, the value of
semncnt associated with the specified semaphore shall be decremented, and the calling thread
shall resume execution in the manner prescribed in sigaction() .
2. If sem_op is a positive integer and the calling process has alter permission, the value of sem_op
shall be added to semval and, if (sem_flg &SEM_UNDO) is non-zero, the value of sem_op shall be
subtracted from the calling process' semadj value for the specified semaphore.
3. If sem_op is 0 and the calling process has read permission, one of the following shall occur:
* If semval is 0, semop() shall return immediately.
* If semval is non-zero and (sem_flg &IPC_NOWAIT) is non-zero, semop() shall return immediately.
* If semval is non-zero and (sem_flg &IPC_NOWAIT) is 0, semop() shall increment the semzcnt
associated with the specified semaphore and suspend execution of the calling thread until one of
the following occurs:
* The value of semval becomes 0, at which time the value of semzcnt associated with the specified
semaphore shall be decremented.
* The semid for which the calling thread is awaiting action is removed from the system. When this
occurs, errno shall be set equal to [EIDRM] and -1 shall be returned.
* The calling thread receives a signal that is to be caught. When this occurs, the value of
semzcnt associated with the specified semaphore shall be decremented, and the calling thread
shall resume execution in the manner prescribed in sigaction() .
Upon successful completion, the value of sempid for each semaphore specified in the array pointed to by
sops shall be set equal to the process ID of the calling process.
RETURN VALUE
Upon successful completion, semop() shall return 0; otherwise, it shall return -1 and set errno to
indicate the error.
ERRORS
The semop() function shall fail if:
E2BIG The value of nsops is greater than the system-imposed maximum.
EACCES Operation permission is denied to the calling process; see XSI Interprocess Communication .
EAGAIN The operation would result in suspension of the calling process but (sem_flg &IPC_NOWAIT) is non-
zero.
EFBIG The value of sem_num is less than 0 or greater than or equal to the number of semaphores in the
set associated with semid.
EIDRM The semaphore identifier semid is removed from the system.
EINTR The semop() function was interrupted by a signal.
EINVAL The value of semid is not a valid semaphore identifier, or the number of individual semaphores for
which the calling process requests a SEM_UNDO would exceed the system-imposed limit.
ENOSPC The limit on the number of individual processes requesting a SEM_UNDO would be exceeded.
ERANGE An operation would cause a semval to overflow the system-imposed limit, or an operation would
cause a semadj value to overflow the system-imposed limit.
The following sections are informative.
EXAMPLES
Setting Values in Semaphores
The following example sets the values of the two semaphores associated with the semid identifier to the
values contained in the sb array.
#include <sys/sem.h>
...
int semid;
struct sembuf sb[2];
int nsops = 2;
int result;
/* Adjust value of semaphore in the semaphore array semid. */
sb[0].sem_num = 0;
sb[0].sem_op = -1;
sb[0].sem_flg = SEM_UNDO | IPC_NOWAIT;
sb[1].sem_num = 1;
sb[1].sem_op = 1;
sb[1].sem_flg = 0;
result = semop(semid, sb, nsops);
Creating a Semaphore Identifier
The following example gets a unique semaphore key using the ftok() function, then gets a semaphore ID
associated with that key using the semget() function (the first call also tests to make sure the
semaphore exists). If the semaphore does not exist, the program creates it, as shown by the second call
to semget(). In creating the semaphore for the queuing process, the program attempts to create one
semaphore with read/write permission for all. It also uses the IPC_EXCL flag, which forces semget() to
fail if the semaphore already exists.
After creating the semaphore, the program uses a call to semop() to initialize it to the values in the
sbuf array. The number of processes that can execute concurrently without queuing is initially set to 2.
The final call to semget() creates a semaphore identifier that can be used later in the program.
The final call to semop() acquires the semaphore and waits until it is free; the SEM_UNDO option releases
the semaphore when the process exits, waiting until there are less than two processes running
concurrently.
#include <sys/types.h>
#include <stdio.h>
#include <sys/ipc.h>
#include <sys/sem.h>
#include <sys/stat.h>
#include <errno.h>
#include <unistd.h>
#include <stdlib.h>
#include <pwd.h>
#include <fcntl.h>
#include <limits.h>
...
key_t semkey;
int semid, pfd, fv;
struct sembuf sbuf;
char *lgn;
char filename[PATH_MAX+1];
struct stat outstat;
struct passwd *pw;
...
/* Get unique key for semaphore. */
if ((semkey = ftok("/tmp", 'a')) == (key_t) -1) {
perror("IPC error: ftok"); exit(1);
}
/* Get semaphore ID associated with this key. */
if ((semid = semget(semkey, 0, 0)) == -1) {
/* Semaphore does not exist - Create. */
if ((semid = semget(semkey, 1, IPC_CREAT | IPC_EXCL | S_IRUSR |
S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH)) != -1)
{
/* Initialize the semaphore. */
sbuf.sem_num = 0;
sbuf.sem_op = 2; /* This is the number of runs without queuing. */
sbuf.sem_flg = 0;
if (semop(semid, &sbuf, 1) == -1) {
perror("IPC error: semop"); exit(1);
}
}
else if (errno == EEXIST) {
if ((semid = semget(semkey, 0, 0)) == -1) {
perror("IPC error 1: semget"); exit(1);
}
}
else {
perror("IPC error 2: semget"); exit(1);
}
}
...
sbuf.sem_num = 0;
sbuf.sem_op = -1;
sbuf.sem_flg = SEM_UNDO;
if (semop(semid, &sbuf, 1) == -1) {
perror("IPC Error: semop"); exit(1);
}
APPLICATION USAGE
The POSIX Realtime Extension defines alternative interfaces for interprocess communication. Application
developers who need to use IPC should design their applications so that modules using the IPC routines
described in XSI Interprocess Communication can be easily modified to use the alternative interfaces.
RATIONALE
None.
FUTURE DIRECTIONS
None.
SEE ALSO
XSI Interprocess Communication , Realtime , exec() , exit() , fork() , semctl() , semget() , sem_close()
, sem_destroy() , sem_getvalue() , sem_init() , sem_open() , sem_post() , sem_unlink() , sem_wait() , the
Base Definitions volume of IEEE Std 1003.1-2001, <sys/ipc.h>, <sys/sem.h>, <sys/types.h>
COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2003 Edition,
Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base
Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of Electrical and Electronics Engineers,
Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and
The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The
original Standard can be obtained online at http://www.opengroup.org/unix/online.html .