Provided by: freebsd-manpages_9.2+1-1_all 

NAME
nxge — Neterion Xframe 10GbE Server/Storage adapter driver
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device nxge
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_nxge_load="YES"
DESCRIPTION
The nxge driver provides support for Neterion Xframe-I and Xframe-II adapters. The driver supports TCP
Segmentation Offload (TSO/LSO), Large Receive Offload (LRO), Jumbo Frames (5 buffer mode), Header
Separation (Rx 2 buffer mode), VLAN, and Promiscuous mode.
For general information and support, please visit the Neterion support page
http://www.neterion.com/support/support.html.
Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500
bytes with the ifconfig(8) utility configures the adapter to transmit and receive Jumbo Frames. Xframe
adapters support Jumbo Frames up to 9600 bytes.
For Jumbo Frames, the driver will try to allocate physically contiguous buffers. Failures to do so may
degrade the performance. To resolve such problems, please visit http://www.neterion.com where additional
information and a kernel patch can be found.
For more information on configuring this device, see ifconfig(8).
HARDWARE
The nxge driver supports Neterion Xframe 10 Gigabit Ethernet adapters listed in
http://www.neterion.com/how/pricing.html.
SUPPORT
For troubleshooting tips and FAQs, please visit
http://trac.neterion.com/cgi-bin/trac.cgi/wiki/TitleIndex?anonymous.
For any issues please send an email to ⟨support@neterion.com⟩.
SEE ALSO
arp(4), netintro(4), ifconfig(8)
HISTORY
The nxge device driver first appeared in FreeBSD 7.0.
AUTHORS
The nxge driver was written by Neterion ⟨support@neterion.com⟩.
Debian October 16, 2007 NXGE(4)