Provided by: live-boot-doc_3.0.1-1_all 
NAME
persistence.conf - Configuration file for persistence media in live-boot
DESCRIPTION
If live-boot probes a persistence volume with the label (or GPT name, or file name, but
from now on we will just say "label") "persistence", that volume's persistence is fully
customizable through the persistence.conf file stored on the root of its file system. Any
such labeled volume must have such a file, or it will be ignored.
The format of persistence.conf allows empty lines and lines starting with a "#" (used for
comments), both which will be ignored. A so called "custom mount" has the format:
DIR [OPTION]...
which roughly translates to "make DIR persistence in the way described by the list of
OPTIONs".
For each custom mount DIR must be an absolute path that cannot contain white spaces or the
special . and .. path components, and cannot be /live (or any of its sub-directories).
Once activated all changes (file deletion, creation and modification) to DIR on the live
file system are stored persistently into a path equivalent to DIR on the persistence
media, called the source directory. The default way to achieve persistence is to simply
bind-mount the corresponding source directory to DIR, but this can be changed through the
use of OPTIONs.
All custom mounts will be done in an order so that no two custom mounts can "hide" each
other. For instance, if we have the two DIR:s /a and /a/b it would always be the case that
/a is mounted first, then /a/b. This remains true no matter how the lines in
persistence.conf are ordered, or if several persistence.conf files on different
persistence media are used at the same time. However, it is forbidden for custom mounts to
have their source directory inside the source directory of another custom mount, so the
source directories that are auto-created by live-boot does not support "nested" mounts
like /a and /a/b on the same media. In this case you must use the source option (see
below) to make sure that they are stored in different source directories.
When a source directory doesn't exist on the persistence media for a certain custom mount,
it will be created automatically, and permissions and ownership will be optimistically set
according to DIR. It will also be bootstrapped by copying the contents of the DIR into its
source directory on the persistence media. The bootstrapping will not happen when the link
or union options are used (see below).
OPTIONS
Custom mounts defined in persistence.conf accept the following options in a coma-separated
list:
source=PATH
When given, store the persistence changes into PATH on the persistence media. PATH
must be a relative path (with respect to the persistence media root) that cannot
contain white spaces or the special . or .. path components, with the exception that
it can be just . which means the persistence media root. This option is mostly
relevant if you want to nest custom mounts, which otherwise would cause errors, or if
you want to make the whole media root available (similar to the now deprecated home-rw
type of persistence).
The following options are mutually exclusive (only the last given one will be in effect):
bind
Bind-mount the source directory to DIR. This is the default.
link
Create the directory structure of the source directory on the persistence media in DIR
and create symbolic links from the corresponding place in DIR to each file in the
source directory. Existing files or directories with the same name as any link will
be overwritten. Note that deleting the links in DIR will only remove the link, not the
corresponding file in the source; removed links will reappear after a reboot. To
permanently add or delete a file one must do so directly in the source directory.
Effectively link will make only files already in the source directory persistent, not
any other files in DIR. These files must be manually added to the source directory to
make use of this option, and they will appear in DIR in addition to files already
there. This option is useful when only certain files need to be persistent, not the
whole directory they're in, e.g. some configuration files in a user's home directory.
union
Save the rw branch of a union on the persistence media, so only the changes are stored
persistently. This can potentially reduce disk usage compared to bind-mounts, and will
not hide files added to the read-only media. One caveat is that the union will use DIR
from the image's read-only file system, not the real file system root, so files
created after boot (e.g. by live-config) will not appear in the union. This option
will use the union file system specified by live-boot's union boot parameter, but is
not supported with union=unionmount.
DIRECTORIES
/live/persistence
All persistence volumes will be mounted here (in a directory corresponding to the
device name). The persistence.conf file can easily be edited through this mount, as
well as any source directories (which is especially practical for custom mounts using
the link option).
EXAMPLES
Let's say we have a persistence volume VOL with the a persistence.conf file containing the
following four lines (numbered for ease of reference):
1. /home/user1 link,source=config-files/user1
2. /home/user2 link,source=config-files/user2
3. /home
4. /usr union
The corresponding source directories are:
1. VOL/config-files/user1 (but it would be VOL/home/user1 without the source option)
2. VOL/config-files/user2 (but it would be VOL/home/user2 without the source option)
3. VOL/home
4. VOL/usr
It was necessary to set the source options for 1 and 2, since they otherwise would become
nested with 3's source, which is invalid.
Line 3 will be taken care of before line 1 and 2 in order to prevent custom mounts 1 and 2
from being hidden by 3. When line 3 is handled, VOL/home is simply bind-mounted on /home.
To illustrate what happens for lines 1 and 2, let's say that the following files exist:
a. VOL/config-files/user1/.emacs
b. VOL/config-files/user2/.bashrc
c. VOL/config-files/user2/.ssh/config
Then the following links and directories will be created:
Link: /home/user1/.emacs -> VOL/config-files/user1/.emacs (from a)
Link: /home/user2/.bashrc -> VOL/config-files/user2/.bashrc (from b)
Dir: /homea/user2/.ssh (from c)
Link: /home/user2/.ssh/config -> VOL/config-files/user2/.ssh/config (from c)
One could argue, though, that lines 1 and 2 in the example persistence.conf file above are
unnecessary since line 3 already would make all of /home persistent. The link option is
intended for situations where you don't want a complete directory to be persistent, only
certain files in it or its sub-directories.
Line 4 can be mounted at any time since its DIR (and source directory) is completely
disjoint from all the other custom mounts. When mounted, VOL/usr will be the rw branch due
to the union option, and will only contain the difference compared to the underlying read-
only file system. Hence packages could be installed into /usr with great space-wise
efficiency compared to bind-mounts, since in the latter case all of /usr would have to be
copied into VOL/usr during the initial bootstrap.
SEE ALSO
live-boot(7)
live-build(7)
live-config(7)
live-tools(7)
HOMEPAGE
More information about live-boot and the Debian Live project can be found on the homepage
at <http://live.debian.net/> and in the manual at <http://live.debian.net/manual/>.
BUGS
Bugs can be reported by submitting a bugreport for the live-boot package in the Debian Bug
Tracking System at <http://bugs.debian.org/> or by writing a mail to the Debian Live
mailing list at <debian-live@lists.debian.org>.
AUTHOR
persistence.conf was written by anonym <anonym@lavabit.com> for the Debian project.