Provided by: dynamips_0.2.11-1_amd64 bug

NAME

       hypervisor_mode  -  allows you to run simultaneously many virtual router instances, and to
       simulate ATM, Ethernet or Frame‐Relay networks.

SYNOPSIS

       dynamips -H [ip_address:]tcp_port

DESCRIPTION

       You can connect directly to the TCP control port with telnet, or use dynagen/dynagui  that
       will pass commands transparently. The second method is highly recommended.
       The  command  syntax is simple: <module> <function> [arguments...]  For example: "vm start
       R1" starts virtual instance named "R1".

       Available since version 0.2.5.

       The modules that are currently defined are given below:
              hypervisor General hypervisor management

              vm     General virtual machine (VM) management

              vm_debug
                     General virtual machine (VM) debugging

              c7200  Virtual instances of Cisco 7200

              c3745  Virtual instances of Cisco 3745

              c3725  Virtual instances of Cisco 3725

              c3600  Virtual instances of Cisco 3600

              c2691  Virtual instances of Cisco 2691

              c2600  Virtual instances of Cisco 2600

              c1700  Virtual instances of Cisco 1700

              nio    Network Input/Output (NIO) descriptors

              nio_bridge
                     NIO bridges (shared media)

              atmsw  ATM switches

              atm_bridge
                     ATM bridges

              frsw   Frame‐Relay switches

              ethsw  Ethernet switches

              object_store
                     Object store

       Hypervisor management module ("hypervisor")

              hypervisor version
                     Display the version of dynamips.

              hypervisor module_list
                     Display the module list.

              hypervisor cmd_list <module>
                     Display commands recognized by the specified module.

              hypervisor close
                     Close the current session.

              hypervisor stop
                     Destroy all objects and stop hypervisor.

              hypervisor reset
                     Destroy all objects. (used to get an empty configuration)

              hypervisor working_dir <directory>
                     Set the directory to use to store files.

              hypervisor save_config <filename>
                     Save the configuration of all objects into the specified file.

              hypervisor parser_test [<a1> [... <a10>]]
                     Display up to 10 arguments. (since version 0.2.6-RC1)

              hypervisor uuid
                     Display the local uuid. (since version 0.2.8-RC3)

              hypervisor tsg_stats
                     Dump statistics about JIT code  sharing  to  the  console.   (since  version
                     0.2.8-RC3, unstable)

       Virtual Machine module ("vm")

              vm list
                     List all VM instances.  (c7200, c3745, c3725, c3600, c2691, c2600, c1700)

              vm list_con_ports
                     List all VM console TCP port.  (since version 0.2.6-RC5)

              vm create <instance_name> <instance_id> <platform>
                     Create  a  new  router  instance.  The ID must be unique and is used to name
                     files on disk.  (since version 0.2.8-RC1)

              vm rename <instance_name> <new_name>
                     Rename a router instance.  (since version 0.2.11)

              vm delete <instance_name>
                     Delete the specified instance.  (since version 0.2.8-RC1)

              vm start <instance_name>
                     Start the instance. At least the IOS image  must  be  set.   (since  version
                     0.2.8-RC1)

              vm stop <instance_name>
                     Stop the instance. The settings are kept.  (since version 0.2.8-RC1)

              vm get_status <instance_name>
                     Get  the  status  of  a  VM instance.  Return values: 0=inactive, 1=shutting
                     down, 2=running, 3=suspended.  (since version 0.2.11)

              vm set_tsg <instance_name> <group_id>
                     Set  translation  sharing  group.    (since   version   0.2.8-RC3-community,
                     unstable)

              vm set_debug_level <instance_name> <level>
                     Set  the  debug  level (which is a number) for a VM. By default, no specific
                     debug is enabled (level = 0).

              vm set_ios <instance_name> <ios_file>
                     Set the IOS image file to use. There is no default.

              vm set_config <instance_name> <startup_file> [<private_file>]
                     Set the config files that are pushed to startup-config and private-config in
                     NVRAM  when  the  instance  is started.  To keep existing data, use an empty
                     string ('') for the filename.   The  optional  <private_file>  is  an  empty
                     string by default.  (supports <private_file> since version 0.2.10)

              vm extract_config <instance_name>
                     Get  the contents of the config files startup-config and private-config from
                     NVRAM. The data of each file is encoded in a Base64  string,  surrounded  by
                     single quotes.  (returns private-config since version 0.2.10)

              vm push_config <instance_name> <startup_cfg> [<private_cfg>]
                     Push  configuration to the config files startup-config and private-config in
                     NVRAM.  The data is a Base64 encoded string, or '(keep)'  to  keep  existing
                     data.   The  optional  <private_cfg>  is  '(keep)'  by  default.   (supports
                     <private_cfg> since version 0.2.11)

              vm set_ram <instance_name> <ram_size>
                     Set the RAM size, specified  in Mbytes.

              vm set_nvram <instance_name> <nvram_size>
                     Set the NVRAM size, specified in Kbytes.

              vm set_ram_mmap <instance_name> <0|1>
                     Enable/Disable use of a mapped file to simulate router memory. By default, a
                     mapped file is used. This is a bit slower, but requires less memory.

              vm set_sparse_mem <instance_name> <0|1>
                     Enable/disable use of sparse memory.  (since version 0.2.7-RC1)

              vm suspend <instance_name>
                     Suspend execution of the instance.

              vm resume <instance_name>
                     Resume execution of the instance.

              vm set_clock_divisor <instance_name> <clock_div>
                     Set  the  clock  divisor  value.  The higher is the value, the faster is the
                     clock in the virtual machine. The default is 4, but it is often required  to
                     adjust it.

              vm set_blk_direct_jump <instance_name> <0|1>
                     Enable/disable  use  of  block  direct  jump.   (compatibility option, since
                     version 0.2.7-RC2)

              vm set_idle_pc <instance_name> <pc_value>
                     Set the idle Pointer Counter (PC). You must determine it through the  method
                     explained in the main README file.

              vm set_idle_pc_online <instace_name> <cpu_id> <pc_value>
                     Set the idle PC value when the CPU is online.  (since version 0.2.6-RC2)

              vm get_idle_pc_prop <instance_name> <cpu_id>
                     Get  the  idle  PC  proposals.  Takes 1000 measurements and records up to 10
                     idle PC proposals.  There is a 10ms wait between each  measurement.   (since
                     version 0.2.6-RC2)

              vm show_idle_pc_prop <instance_name> <cpu_id>
                     Dump the idle PC proposals. (since version 0.2.6-RC2)

              vm set_idle_max <instance_name> <cpu_id> <idle_max>
                     Set CPU idle max value. (since version 0.2.6-RC2)

              vm set_idle_sleep_time <instance_name> <cpu_id> <idle_sleep_time>
                     Set CPU idle sleep time value. (since version 0.2.6-RC2)

              vm show_timer_drift <instance_name> <cpu_id>
                     Show info about potential timer drift.  (since version 0.2.6-RC3)

              vm set_ghost_file <instance_name> <ghost_ram_filename>
                     Set  ghost RAM file. (since version 0.2.6-RC3, needs an extra bogus argument
                     before version 0.2.6-RC4)

              vm set_ghost_status <instance_name> <ghost_status>"
                     Set ghost RAM  status.  (since  version  0.2.6-RC3,  needs  an  extra  bogus
                     argument before version 0.2.6-RC4)

              vm set_exec_area <instance_name> <area_size>
                     Set the exec area size. The exec area is a pool of host memory used to store
                     pages translated by the JIT (they contain the native code  corresponding  to
                     MIPS code pages).

              vm set_disk0 <instance_name> <value>
                     Set size of PCMCIA ATA disk0.

              vm set_disk1 <instance_name> <value>
                     Set size of PCMCIA ATA disk1.

              vm set_conf_reg <instance_name> <value>
                     Set the config register value. The default is 0x2102.

              vm set_con_tcp_port <instance_name> <tcp_port>
                     Set  the  TCP  port  to  use for console. By default, no TCP port is chosen,
                     meaning that you cannot get access to the console.

              vm set_aux_tcp_port <instance_name> <tcp_port>
                     Set the TCP port to use for AUX port. By default, no  TCP  port  is  chosen,
                     meaning that you cannot get access to the AUX port.

              vm cpu_info <instance_name> <cpu_id>
                     Show  info  about  the  CPU  identified  by "cpu_id". The boot CPU (which is
                     typically the only CPU) has ID 0.

              vm cpu_usage <instance_name> <cpu_id>
                     Show cpu usage of dynamips in seconds. (experimental)
                     The  instance   must   exist,   "cpu_id"   is   ignored.    (since   version
                     0.2.8-RC5-community)

              vm send_con_msg <instance_name> <str>
                     Send a message on the console. (since version 0.2.6-RC3)

              vm send_aux_msg <instance_name> <str>
                     Send a message on the AUX port. (since version 0.2.6-RC3)

              vm slot_bindings <instance_name>
                     Show slot bindings. (since version 0.2.8-RC1)

              vm slot_nio_bindings <instance_name> <slot_id>
                     Show NIO bindings for the specified slot. (since version 0.2.8-RC1)

              vm slot_add_binding <instance_name> <slot_id> <port_id> <dev_type>
                     Add a slot binding. (since version 0.2.8-RC1)

              vm slot_remove_binding <instance_name> <slot_id> <port_id>
                     Remove a slot binding . (since version 0.2.8-RC1)

              vm slot_add_nio_binding <instance_name> <slot_id> <port_id> <nio_name>
                     Add a NIO binding for a slot/port. (since version 0.2.8-RC1)

              vm slot_remove_nio_binding <instance_name> <slot_id> <port_id>
                     Remove a NIO binding for a slot/port. (since version 0.2.8-RC1)

              vm slot_enable_nio <instance_name> <slot_id> <port_id>
                     Enable NIO of the specified slot/port. (since version 0.2.8-RC1)

              vm slot_disable_nio <instance_name> <slot_id> <port_id>
                     Disable NIO of the specified slot/port. (since version 0.2.8-RC1)

              vm slot_oir_start <instance_name> <slot_id> <subslot_id>
                     OIR to start a slot/subslot. (since version 0.2.8-RC3-community)

              vm slot_oir_stop <isntance_name> <slot_id> <subslot_id>
                     OIR to stop a slot/subslot. (since version 0.2.8-RC3-community)

       Virtual Machine debugging module ("vm_debug")

              Available since version 0.2.6-RC1.

              vm_debug show_cpu_regs <instance_name> <cpu_id>
                     Dump CPU registers to the console.

              vm_debug show_cpu_mmu <instance_name> <cpu_id>
                     Dump CPU MMU info to the console. (since version 0.2.7-RC1)

              vm_debug set_cpu_reg <instance_name> <cpu_id> <reg_id> <value>
                     Set the value of a CPU register.

              vm_debug add_cpu_breakpoint <instance_name> <cpu_id> <address>
                     Add a breakpoint.

              vm_debug remove_cpu_breakpoint <instance_name> <cpu_id> <address>
                     Remove a breakpoint.

              vm_debug pmem_w32 <instance_name> <cpu_id> <address> <value>
                     Write a 32-bit memory word to physical memory.

              vm_debug pmem_r32 <instance_name> <cpu_id> <address>
                     Read a 32-bit memory word from physical memory.

              vm_debug pmem_w16 <instance_name> <cpu_id> <address> <value>
                     Write a 16-bit memory word to physical memory.

              vm_debug pmem_r16 <instance_name> <cpu_id> <address>
                     Read a 16-bit memory word from physical memory.

       Virtual Cisco 7200 instances module ("c7200")

              c7200 list
                     List all existing Cisco 7200 instances.

              c7200 set_npe <instance_name> <npe_name>
                     Set  the  NPE  model.   For  example:  npe‐100,  npe‐400, ... The default is
                     "npe‐400".

              c7200 set_midplane <instance_name> <midplane_name>
                     Set the midplane model, it can be either "std"  or  "vxr".  The  default  is
                     "vxr".

              c7200 get_mac_addr <instance_name>
                     Get  the  base  MAC  address  of  the  router.  By  default,  the address is
                     automatically       generated       with        this        pattern        :
                     ca<instance_id>.<process_pid>.0000 (Cisco format). (since version 0.2.11)

              c7200 set_mac_addr <instance_name> <mac_addr>
                     Set  the  base  MAC address of the router. The MAC address patern can be the
                     Cisco  format  (e.g.  ca01.1234.0000)   or   the   standard   format   (e.g.
                     ca:01:12:34:00:00).

              c7200 set_system_id <instance_name> <system_id>
                     Set the system id. (since version 0.2.8-RC3-community)

              c7200 set_temp_sensor <instance_name> <sensor_id> <temperature>
                     Set  temperature  for  a  DS1620  sensor.   This  can  be  used  to simulate
                     environmental problems like overheat.  (since version 0.2.8-RC3-community)

              c7200 set_power_supply <instance_name> <power_supply_id> <0|1>
                     Set power supply  status.   This  can  be  used  to  simulate  environmental
                     problems like power loss.  (since version 0.2.8-RC3-community)

              c7200 show_hardware <instance_name>
                     Display virtual hardware info about the instance.

       Virtual Cisco 3745 instances module ("c3745")

              c3745 list
                     List all existing Cisco 3745 instances.

              c3745 set_iomem <instance_name> <size>
                     Set the I/O mem size.

              c3745 get_mac_addr <instance_name>
                     Get  the  base  MAC  address  of  the  router.  By  default,  the address is
                     automatically       generated       with        this        pattern        :
                     c4<instance_id>.<process_pid>.0000 (Cisco format). (since version 0.2.11)

              c3745 set_mac_addr <instance_name> <mac_addr>
                     Set  the  base  MAC address of the router. The MAC address patern can be the
                     Cisco  format  (e.g.  c401.1234.0000)   or   the   standard   format   (e.g.
                     c4:01:12:34:00:00).

              c3745 set_system_id <instance_name> <system_id>
                     Set the system id. (since version 0.2.8-RC3-community)

              c3745 show_hardware <instance_name>
                     Display virtual hardware info about the instance.

       Virtual Cisco 3725 instances module ("c3725")

              c3725 list
                     List all existing Cisco 3725 instances.

              c3725 set_iomem <instance_name> <size>
                     Set the I/O mem size.

              c3725 get_mac_addr <instance_name>
                     Get  the  base  MAC  address  of  the  router.  By  default,  the address is
                     automatically       generated       with        this        pattern        :
                     c2<instance_id>.<process_pid>.0000 (Cisco format). (since version 0.2.11)

              c3725 set_mac_addr <instance_name> <mac_addr>
                     Set  the  base  MAC address of the router. The MAC address patern can be the
                     Cisco  format  (e.g.  c201.1234.0000)   or   the   standard   format   (e.g.
                     c2:01:12:34:00:00).

              c3725 set_system_id <instance_name> <system_id>
                     Set the system id. (since version 0.2.8-RC3-community)

              c3725 show_hardware <instance_name>
                     Display virtual hardware info about the instance.

       Virtual Cisco 3600 instances module ("c3600")

              c3600 list
                     List all existing Cisco 3600 instances.

              c3600 set_chassis <instance_name> <chassis_name>
                     Set  the  chassis  model.  Possible values: 3620, 3640, 3660. The default is
                     "3640".

              c3600 set_iomem <instance_name> <size>
                     Set the I/O mem size.

              c3600 get_mac_addr <instance_name>
                     Get the base  MAC  address  of  the  router.  By  default,  the  address  is
                     automatically        generated        with        this       pattern       :
                     cc<instance_id>.<process_pid>.0000 (Cisco format). (since version 0.2.11)

              c3600 set_mac_addr <instance_name> <mac_addr>
                     Set the base MAC address of the router. The MAC address patern  can  be  the
                     Cisco   format   (e.g.   cc01.1234.0000)   or   the  standard  format  (e.g.
                     cc:01:12:34:00:00).

              c3600 set_system_id <instance_name> <system_id>
                     Set the system id. (since version 0.2.8-RC3-community)

              c3600 show_hardware <instance_name>
                     Display virtual hardware info about the instance.

       Virtual Cisco 2691 instances module ("c2691")

              c2691 list
                     List all existing Cisco 2691 instances.

              c2691 set_iomem <instance_name> <size>
                     Set the I/O mem size.

              c2691 get_mac_addr <instance_name>
                     Get the base  MAC  address  of  the  router.  By  default,  the  address  is
                     automatically        generated        with        this       pattern       :
                     c0<instance_id>.<process_pid>.0000 (Cisco format). (since version 0.2.11)

              c2691 set_mac_addr <instance_name> <mac_addr>
                     Set the base MAC address of the router. The MAC address patern  can  be  the
                     Cisco   format   (e.g.   c001.1234.0000)   or   the  standard  format  (e.g.
                     c0:01:12:34:00:00).

              c2691 set_system_id <instance_name> <system_id>
                     Set the system id. (since version 0.2.11)

              c2691 show_hardware <instance_name>
                     Display virtual hardware info about the instance.

       Virtual Cisco 2600 instances module ("c2600")

              Available since version 0.2.7-RC1.

              c2600 list
                     List all existing Cisco 2600 instances.

              c2600 set_chassis <instance_name> <chassis_name>
                     Set the chassis model. Possible values:  2610,  2611,  2620,  2621,  2610XM,
                     2611XM, 2620XM, 2621XM, 2650XM, 2651XM. The default is "2610".

              c2600 set_iomem <instance_name> <size>
                     Set the I/O mem size.

              c2600 get_mac_addr <instance_name>
                     Get  the  base  MAC  address  of  the  router.  By  default,  the address is
                     automatically       generated       with        this        pattern        :
                     c8<instance_id>.<process_pid>.0000 (Cisco format). (since version 0.2.11)

              c2600 set_mac_addr <instance_name> <mac_addr>
                     Set  the  base  MAC address of the router. The MAC address patern can be the
                     Cisco  format  (e.g.  c801.1234.0000)   or   the   standard   format   (e.g.
                     c8:01:12:34:00:00).

              c2600 set_system_id <instance_name> <system_id>
                     Set the system id. (since version 0.2.8-RC3-community)

              c2600 show_hardware <instance_name>
                     Display virtual hardware info about the instance.

       Virtual Cisco 1700 instances module ("c1700")

              Available since version 0.2.8-RC1.

              c1700 list
                     List all existing Cisco 1700 instances.

              c1700 set_chassis <instance_name> <chassis_name>
                     Set  the chassis model. Possible values: 1710, 1720, 1721, 1750, 1751, 1760.
                     The default is "1720".

              c1700 set_iomem <instance_name> <size>
                     Set the I/O mem size.

              c1700 get_mac_addr <instance_name>
                     Get the base  MAC  address  of  the  router.  By  default,  the  address  is
                     automatically        generated        with        this       pattern       :
                     d0<instance_id>.<process_pid>.0000 (Cisco format). (since version 0.2.11)

              c1700 set_mac_addr <instance_name> <mac_addr>
                     Set the base MAC address of the router. The MAC address patern  can  be  the
                     Cisco   format   (e.g.   d001.1234.0000)   or   the  standard  format  (e.g.
                     d0:01:12:34:00:00).

              c1700 set_system_id <instance_name> <system_id>
                     Set the system id. (since version 0.2.8-RC3-community)

              c1700 show_hardware <instance_name>
                     Display virtual hardware info about the instance.

       Network Input/Output (NIO) module ("nio")

              nio list
                     List all exiting NIOs.

              nio create_udp <nio_name> <local_port> <remote_host> <remote_port>
                     Create an UDP NIO with the specified parameters.

              nio create_udp_auto <nio_name> <local_addr> <local_port_start> <local_port_end>
                     Create an auto UDP NIO.  (since version 0.2.8-RC3-community)

              nio connect_udp_auto <nio_name> <remote_host> <remote_port>
                     Connect  an  UDP  Auto  NIO  to  a   remote   host/port.    (since   version
                     0.2.8-RC3-community)

              nio create_mcast <nio_name> <mcast_group> <mcast_port>
                     Create a Multicast NIO.  (since version 0.2.8-RC3-community)

              nio set_mcast_ttl <nio_name> <ttl>
                     Set TTL for a Multicast NIO.  (since version 0.2.8-RC3-community)

              nio create_unix <nio_name> <local_file> <remote_file>
                     Create an UNIX NIO with the specified parameters.

              nio create_vde <nio_name> <control_file> <local_file>
                     Create  a  VDE  NIO  with  the specified parameters. VDE stands for "Virtual
                     Distributed Ethernet" and is compatible with UML (User‐Mode‐Linux) switch.

              nio create_tap <nio_name> <tap_device>
                     Create a TAP NIO. TAP devices are supported only on Linux  and  FreeBSD  and
                     require root access.

              nio create_gen_eth <nio_name> <eth_device>
                     Create  a  generic ethernet NIO, using PCAP (0.9.4 and greater). It requires
                     root access. Available if compiled with GEN_ETH.

              nio create_linux_eth <nio_name> <eth_device>
                     Create a Linux ethernet NIO. It requires root access and is  supported  only
                     on Linux platforms. Available if compiled with LINUX_ETH.

              nio create_null <nio_name>
                     Create a Null NIO.

              nio create_fifo <nio_name>
                     Create a Null NIO.

              nio crossconnect_fifo <nio_name> <nio_name>
                     Establish a cross-connect between 2 FIFO NIO.

              nio rename <nio_name> <new_name>
                     Rename a NIO.  (since version 0.2.11)

              nio delete <nio_name>
                     Delete the specified NIO. The NIO can be deleted only when it is not anymore
                     in use by another object.

              nio set_debug <nio_name> <debug>
                     Enable/Disable debugging for the specified NIO. When debugging  is  enabled,
                     received  and  emitted packets are displayed at screen. It is mainly used to
                     debug interface drivers.

              nio bind_filter <nio_name> <direction> <filter_name>
                     Bind a packet filter.  Direction is 0 for receiving, 1 for  sending,  2  for
                     both.   Filter  freq_drop drops packets. Filter capture captures packets and
                     is only available if compiled with GEN_ETH.

              nio unbind_filter <nio_name> <direction>
                     Unbind a packet filter.

              nio setup_filter <nio_name> <direction> [<a3> [...<a10>]]
                     Setup a packet filter for a given NIO.  The arguments are passed on  to  the
                     setup function of the filter.
                      Filter  freq_drop has 1 argument <frequency> . It will drop everything with
                     a -1 frequency, drop every Nth packet with a  positive  frequency,  or  drop
                     nothing.
                      Filter  capture  has  2  arguments <link_type_name> <output_file> . It will
                     capture packets to the target output file. The link type  name  is  a  case‐
                     insensitive  DLT_  name  from  the pcap library constants with the DLT_ part
                     removed.

              nio get_stats <nio_name>
                     Get statistics of a NIO.  (since version 0.2.8-RC3-community)

              nio reset_stats <nio_name>
                     Reset statistics of a NIO.  (since version 0.2.8-RC3-community)

              nio set_bandwidth <nio_name> <bandwidth>
                     Set bandwidth constraint.  (since version 0.2.8-RC3-community)

       NIO bridge module ("nio_bridge")

              nio_bridge list
                     List all NIO bridges.

              nio_bridge create <bridge_name>
                     Create a NIO bridge. A NIO bridge acts as a shared media (a kind of hub).

              nio_bridge rename <bridge_name> <new_name>
                     Rename a NIO bridge.  (since version 0.2.11)

              nio_bridge delete <bridge_name>
                     Delete a NIO bridge.

              nio_bridge add_nio <bridge_name> <nio_name>
                     Add a NIO as new port in a NIO bridge. The NIO must be created  through  the
                     "nio" module.

              nio_bridge remove_nio <bridge_name> <nio_name>
                     Remove the specified NIO as member of the NIO bridge.

       Virtual Ethernet switch module ("ethsw")

              ethsw list
                     List all Ethernet switches.

              ethsw create <switch_name>
                     Create a new Ethernet switch.

              ethsw rename <switch_name> <new_name>
                     Rename an Ethernet switch.  (since version 0.2.11)

              ethsw delete <switch_name>
                     Delete the specified Ethernet switch.

              ethsw add_nio <switch_name> <nio_name>
                     Add a NIO as new port in an Ethernet switch. The NIO must be created through
                     the "nio" module.

              ethsw remove_nio <switch_name> <nio_name>
                     Remove the specified NIO as member of the Ethernet switch.

              ethsw set_access_port <switch_name> <nio_name> <vlan_id>
                     Set the specified port as an ACCESS port in VLAN <vlan_id>.

              ethsw set_dot1q_port <switch_name> <nio_name> <native_vlan>
                     Set  the  specified  port  as  a  802.1Q  trunk  port,  with   native   VLAN
                     <native_vlan>.

              ethsw set_qinq_port <switch_name> <nio_name> <outer_vlan>
                     Set   the   specified   port   as  a  trunk  (QinQ)  port.   (since  version
                     0.2.3-RC3-community)

              ethsw clear_mac_addr_table <switch_name>
                     Clear the MAC address table.

              ethsw show_mac_addr_table <switch_name>
                     Show the MAC address table (output format: Ethernet address, VLAN, NIO)

       Virtual ATM switch module ("atmsw")

              atmsw list
                     List all ATM switches.

              atmsw create <switch_name>
                     Create a new ATM switch.

              atmsw rename <switch_name> <new_name>
                     Rename an ATM switch.  (since version 0.2.11)

              atmsw delete <switch_name>
                     Delete the specified ATM switch.

              atmsw create_vpc <switch_name> <input_nio> <input_vpi> <output_nio> <output_vpi>
                     Create a new Virtual Path connection (unidirectional).

              atmsw delete_vpc <switch_name> <input_nio> <input_vpi> <output_nio> <output_vpi>
                     Delete a Virtual Path connection (unidirectional).

              atmsw create_vcc <switch_name>  <input_nio>  <input_vpi>  <input_vci>  <output_nio>
              <output_vpi> <output_vci>
                     Create a new Virtual Channel connection (unidirectional).

              atmsw  delete_vcc  <switch_name>  <input_nio>  <input_vpi> <input_vci> <output_nio>
              <output_vpi> <output_vci>
                     Delete a Virtual Channel connection (unidirectional).

       Virtual ATM bridge module ("atm_bridge")

              Available since version 0.2.8-RC2.

              atm_bridge list
                     List all ATM bridges.

              atm_bridge create <bridge_name>
                     Create a new ATM bridge.

              atm_bridge rename <bridge_name> <new_name>
                     Rename an ATM bridge.  (since version 0.2.11)

              atm_bridge delete <bridge_name>
                     Delete an ATM bridge.

              atm_bridge configure <bridge_name> <eth_nio> <atm_nio> <vpi> <vci>
                     Configure an ATM bridge.

              atm_bridge unconfigure <bridge_name>
                     Unconfigure an ATM bridge.

       Virtual Frame‐Relay switch module ("frsw")

              frsw list
                     List all Frame‐Relay switches.

              frsw create <switch_name>
                     Create a new Frame‐Relay switch.

              frsw rename <switch_name> <new_name>
                     Rename a Frame-Relay switch.  (since version 0.2.11)

              frsw delete <switch_name>
                     Delete the  specified  Frame‐Relay  switch.   frsw  create_vc  <switch_name>
                     <input_nio>  <input_dlci>  <output_nio>  <output_dlci>  Create a new Virtual
                     Circuit connection (unidirectional).

              frsw delete_vc <switch_name> <input_nio> <input_dlci> <output_nio> <output_dlci>
                     Delete a Virtual Circuit connection (unidirectional).

       Object store module ("object_store")

              Available since version 0.2.8-RC2.

              object_store write <object_name> <data>
                     Write an object, data provided in base64 encoding.

              object_store read <object_name>
                     Read an object and return data in base64 encoding.

              object_store rename <object_name> <new_name>
                     Rename an object.  (since version 0.2.11)

              object_store delete <object_name>
                     Delete an object from the store.

              object_store delete_all
                     Delete all objects from the store

              object_store list
                     Object list.

REPORTING BUGS

       Please send bug reports to ⟨https://github.com/GNS3/dynamips/issues⟩

SEE ALSO

       dynamips(1), nvram_export(1), dynagen(1), dynagui(1)
       ⟨http://www.gns3.net/dynamips/⟩
       ⟨http://forum.gns3.net/⟩
       ⟨https://github.com/GNS3/dynamips⟩

OLD WEBSITES

http://www.ipflow.utc.fr/index.php/⟩
       ⟨http://www.ipflow.utc.fr/blog/⟩
       ⟨http://hacki.at/7200emu/index.php

AUTHOR

       dynamips is being maintained by Flávio J. Saraiva  <flaviojs2005@gmail.com>.  This  manual
       page  was  initially  written  by  Erik  Wenzel <erik@debian.org> for the Debian GNU/Linux
       system.

                                           Sep 29, 2013                        HYPERVISOR_MODE(7)