Provided by: cpl-plugin-uves-doc_5.3.0+dfsg-2_all bug

NAME

       uves_cal_mflat - Creates the master flat field frame

SYNOPSIS

       esorex uves_cal_mflat [OPTIONS] FILE.sof

DESCRIPTION

       This recipe creates a master flat frame by 1) subtracting the master bias frame from each
       flat field frame, 2) dividing each flat field frame by the
        exposure time for that frame, 3) taking the median of all bias subtracted,
        normalized raw
        flat frames, 4) optionally subtracting the master dark frame, and 5) subtracting
        the background to get the bias subtracted, optionally dark subtracted, normalized,
       background subtracted master flat-field frame. Symbolically,
        masterflat = median( (flat_i - masterbias)/exptime_i ) - masterdark/exptime
                   - background.

       The input flat field frames must have same tag which must match
       (I|D|S|T|SCREEN|)FLAT_(BLUE|RED), for example TFLAT_BLUE or FLAT_RED. Also, a master bias
       (MASTER_BIAS_xxxx) and ordertable (ORDER_TABLE_xxxx) must be provided for each chip (xxxx
       = BLUE, REDL, REDU). A master dark frame (MASTER_(P)DARK_xxxx) may optionally be provided.
       On blue input the recipe computes one master flat field frame; on red input the recipe
       produces a master flat field frame for each chip (MASTER_FLAT_xxxx, MASTER_IFLAT_xxxx,
       MASTER_DFLAT_xxxx, MASTER_TFLAT_xxxx or MASTER_SCREEN_FLAT_xxxx).

OPTIONS

       --debug <bool>
              Whether or not to save intermediate results to local directory (bool; default:
              False). The full name of this option for the EsoRex configuration file is
              uves.debug [default = False].

       --plotter <str>
              Any plots produced by the recipe are redirected to the command specified by this
              parameter. The plotting command must contain the substring ´gnuplot´ and must be
              able to parse gnuplot syntax on its standard input. Valid examples of such a
              command may include ´gnuplot -persist´ and ´cat > mygnuplot$$.gp´. A finer control
              of the plotting options can be obtained by writing an executable script, e.g.
              my_gnuplot.pl, that executes gnuplot after setting the desired gnuplot options
              (e.g. set terminal pslatex color). To turn off plotting, set this parameter to ´no´
              (str; default: ´no´). The full name of this option for the EsoRex configuration
              file is uves.plotter [default = no].

       --process_chip <str>
              For RED arm data process the redl, redu, or both chip(s) (str; default: ´both´).
              The full name of this option for the EsoRex configuration file is uves.process_chip
              [default = both].

       --norm_method <str>
              Method used to build master frame  (str; default: ´explevel´). The full name of
              this option for the EsoRex configuration file is uves_cal_mflat.norm_method
              [default = explevel].

       --backsub.mmethod <str>
              Background measuring method. If equal to ´median´ the background is sampled using
              the median of a subwindow. If ´minimum´, the subwindow minimum value is used. If
              ´no´, no background subtraction is done.  (str; default: ´median´). The full name
              of this option for the EsoRex configuration file is uves_cal_mflat.backsub.mmethod
              [default = median].

       --backsub.npoints <long>
              This is the number of columns in interorder space used to sample the background.
              (long; default: 82). The full name of this option for the EsoRex configuration file
              is uves_cal_mflat.backsub.npoints [default = 82].

       --backsub.radiusy <long>
              The height (in pixels) of the background sampling window is (2*radiusy + 1). This
              parameter is not corrected for binning. (long; default: 2). The full name of this
              option for the EsoRex configuration file is uves_cal_mflat.backsub.radiusy [default
              = 2].

       --backsub.sdegree <long>
              Degree of interpolating splines. Currently only degree = 1 is supported (long;
              default: 1). The full name of this option for the EsoRex configuration file is
              uves_cal_mflat.backsub.sdegree [default = 1].

       --backsub.smoothx <float>
              If spline interpolation is used to measure the background, the x-radius of the
              post-smoothing window is (smoothx * image_width).  Here, ´image_width´ is the image
              width after binning. If negative, the default values are used: (25.0/4096) for blue
              flat-field frames, (50.0/4096) for red flat-field frames, (300.0/4096) for blue
              science frames and (300.0/4096) for red science frames. (float; default: -1.0). The
              full name of this option for the EsoRex configuration file is
              uves_cal_mflat.backsub.smoothx [default = -1.0].

       --backsub.smoothy <float>
              If spline interpolation is used to measure the background, the y-radius of the
              post-smoothing window is (smoothy * image_height).  Here, ´image_height´ is the
              image height after binning. If negative, the default values are used: (100.0/2048)
              for blue flat-field frames, (300.0/2048) for red flat-field frames, (200.0/2048)
              for blue science frames and (500.0/2048) for red science frames. (float; default:
              -1.0). The full name of this option for the EsoRex configuration file is
              uves_cal_mflat.backsub.smoothy [default = -1.0].

       Note that it is possible to create a configuration file containing these options, along
       with suitable default values. Please refer to the details provided by the 'esorex --help'
       command.

SEE ALSO

       The full documentation for the uves pipeline can be downloaded as a PDF file using the
       following URL:

              ftp://ftp.eso.org/pub/dfs/pipelines/uves/uves-pipeline-manual-5.3.0.pdf

       An overview over the existing ESO pipelines can be found on the web page
       http://www.eso.org/sci/software/pipelines/.

       Basic documentation about the EsoRex program can be found at the esorex (1) man page.

       It is possible to call the pipelines from python using the python-cpl package.  See
       http://packages.python.org/python-cpl/index.html for further information.

       The other recipes of the uves pipeline are uves_cal_response(7),
       uves_cal_mflat_combine(7), flames_utl_unpack(7), flames_cal_wavecal(7),
       uves_cal_mkmaster(7), flames_obs_redchain(7), uves_cal_wavecal(7), uves_cal_tflat(7),
       flames_cal_prep_sff_ofpos(7), uves_utl_remove_crh_single(7), uves_obs_scired(7),
       uves_cal_mbias(7), uves_utl_ima_arith(7), flames_obs_scired(7), uves_cal_orderpos(7),
       flames_cal_mkmaster(7), flames_cal_predict(7), uves_cal_mdark(7), uves_cal_cd_align(7),
       uves_obs_redchain(7), flames_cal_orderpos(7), uves_cal_predict(7)

VERSION

       uves_cal_mflat 5.3.0

AUTHOR

       Jonas M. Larsen <cpl@eso.org>

BUG REPORTS

       Please report any problems to cpl@eso.org. Alternatively, you may send a report to the ESO
       User Support Department <usd-help@eso.org>.

LICENSE

       This file is part of the FLAMES/UVES Pipeline Copyright (C) 2004, 2005, 2006, 2007
       European Southern Observatory

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
       MA  02111-1307  USA