Provided by: samba-common-bin_4.3.11+dfsg-0ubuntu0.14.04.20_amd64 bug

NAME

       net - Tool for administration of Samba and remote CIFS servers.

SYNOPSIS

       net {<ads|rap|rpc>} [-h|--help] [-w|--workgroup workgroup] [-W|--myworkgroup myworkgroup]
        [-U|--user user] [-I|--ipaddress ip-address] [-p|--port port] [-n myname] [-s conffile]
        [-S|--server server] [-l|--long] [-v|--verbose] [-f|--force] [-P|--machine-pass]
        [-d debuglevel] [-V] [--request-timeout seconds] [-t|--timeout seconds] [-i|--stdin]
        [--tallocreport]

DESCRIPTION

       This tool is part of the samba(7) suite.

       The Samba net utility is meant to work just like the net utility available for windows and
       DOS. The first argument should be used to specify the protocol to use when executing a
       certain command. ADS is used for ActiveDirectory, RAP is using for old (Win9x/NT3) clients
       and RPC can be used for NT4 and Windows 2000. If this argument is omitted, net will try to
       determine it automatically. Not all commands are available on all protocols.

OPTIONS

       -?|--help
           Print a summary of command line options.

       -k|--kerberos
           Try to authenticate with kerberos. Only useful in an Active Directory environment.

       -w|--workgroup target-workgroup
           Sets target workgroup or domain. You have to specify either this option or the IP
           address or the name of a server.

       -W|--myworkgroup workgroup
           Sets client workgroup or domain

       -U|--user user
           User name to use

       -I|--ipaddress ip-address
           IP address of target server to use. You have to specify either this option or a target
           workgroup or a target server.

       -p|--port port
           Port on the target server to connect to (usually 139 or 445). Defaults to trying 445
           first, then 139.

       -n|--netbiosname <primary NetBIOS name>
           This option allows you to override the NetBIOS name that Samba uses for itself. This
           is identical to setting the netbios name parameter in the smb.conf file. However, a
           command line setting will take precedence over settings in smb.conf.

       -s|--configfile=<configuration file>
           The file specified contains the configuration details required by the server. The
           information in this file includes server-specific information such as what printcap
           file to use, as well as descriptions of all the services that the server is to
           provide. See smb.conf for more information. The default configuration file name is
           determined at compile time.

       -S|--server server
           Name of target server. You should specify either this option or a target workgroup or
           a target IP address.

       -l|--long
           When listing data, give more information on each item.

       -v|--verbose
           When listing data, give more verbose information on each item.

       -f|--force
           Enforcing a net command.

       -P|--machine-pass
           Make queries to the external server using the machine account of the local server.

       --request-timeout 30
           Let client requests timeout after 30 seconds the default is 10 seconds.

       -t|--timeout 30
           Set timeout for client operations to 30 seconds.

       --use-ccache
           Try to use the credentials cached by winbind.

       -i|--stdin
           Take input for net commands from standard input.

       --tallocreport
           Generate a talloc report while processing a net command.

       -T|--test
           Only test command sequence, dry-run.

       -F|--flags FLAGS
           Pass down integer flags to a net subcommand.

       -C|--comment COMMENT
           Pass down a comment string to a net subcommand.

       -n|--myname MYNAME
           Use MYNAME as a requester name for a net subcommand.

       -c|--container CONTAINER
           Use a specific AD container for net ads operations.

       -M|--maxusers MAXUSERS
           Fill in the maxusers field in net rpc share operations.

       -r|--reboot
           Reboot a remote machine after a command has been successfully executed (e.g. in remote
           join operations).

       --force-full-repl
           When calling "net rpc vampire keytab" this option enforces a full re-creation of the
           generated keytab file.

       --single-obj-repl
           When calling "net rpc vampire keytab" this option allows to replicate just a single
           object to the generated keytab file.

       --clean-old-entries
           When calling "net rpc vampire keytab" this option allows to cleanup old entries from
           the generated keytab file.

       --db
           Define dbfile for "net idmap" commands.

       --lock
           Activates locking of the dbfile for "net idmap check" command.

       -a|--auto
           Activates noninteractive mode in "net idmap check".

       --repair
           Activates repair mode in "net idmap check".

       --acls
           Includes ACLs to be copied in "net rpc share migrate".

       --attrs
           Includes file attributes to be copied in "net rpc share migrate".

       --timestamps
           Includes timestamps to be copied in "net rpc share migrate".

       -X|--exclude DIRECTORY
           Allows to exclude directories when copying with "net rpc share migrate".

       --destination SERVERNAME
           Defines the target servername of migration process (defaults to localhost).

       -L|--local
           Sets the type of group mapping to local (used in "net groupmap set").

       -D|--domain
           Sets the type of group mapping to domain (used in "net groupmap set").

       -N|--ntname NTNAME
           Sets the ntname of a group mapping (used in "net groupmap set").

       -R|--rid RID
           Sets the rid of a group mapping (used in "net groupmap set").

       --reg-version REG_VERSION
           Assume database version {n|1,2,3} (used in "net registry check").

       -o|--output FILENAME
           Output database file (used in "net registry check").

       --wipe
           Create a new database from scratch (used in "net registry check").

       --precheck PRECHECK_DB_FILENAME
           Defines filename for database prechecking (used in "net registry import").

       -e|--encrypt
           This command line parameter requires the remote server support the UNIX extensions or
           that the SMB3 protocol has been selected. Requests that the connection be encrypted.
           Negotiates SMB encryption using either SMB3 or POSIX extensions via GSSAPI. Uses the
           given credentials for the encryption negotiation (either kerberos or NTLMv1/v2 if
           given domain/username/password triple. Fails the connection if encryption cannot be
           negotiated.

       -d|--debuglevel=level
           level is an integer from 0 to 10. The default value if this parameter is not specified
           is 1.

           The higher this value, the more detail will be logged to the log files about the
           activities of the server. At level 0, only critical errors and serious warnings will
           be logged. Level 1 is a reasonable level for day-to-day running - it generates a small
           amount of information about operations carried out.

           Levels above 1 will generate considerable amounts of log data, and should only be used
           when investigating a problem. Levels above 3 are designed for use only by developers
           and generate HUGE amounts of log data, most of which is extremely cryptic.

           Note that specifying this parameter here will override the log level parameter in the
           smb.conf file.

       -V|--version
           Prints the program version number.

       -s|--configfile=<configuration file>
           The file specified contains the configuration details required by the server. The
           information in this file includes server-specific information such as what printcap
           file to use, as well as descriptions of all the services that the server is to
           provide. See smb.conf for more information. The default configuration file name is
           determined at compile time.

       -l|--log-basename=logdirectory
           Base directory name for log/debug files. The extension ".progname" will be appended
           (e.g. log.smbclient, log.smbd, etc...). The log file is never removed by the client.

       --option=<name>=<value>
           Set the smb.conf(5) option "<name>" to value "<value>" from the command line. This
           overrides compiled-in defaults and options read from the configuration file.

COMMANDS

   CHANGESECRETPW
       This command allows the Samba machine account password to be set from an external
       application to a machine account password that has already been stored in Active
       Directory. DO NOT USE this command unless you know exactly what you are doing. The use of
       this command requires that the force flag (-f) be used also. There will be NO command
       prompt. Whatever information is piped into stdin, either by typing at the command line or
       otherwise, will be stored as the literal machine password. Do NOT use this without care
       and attention as it will overwrite a legitimate machine password without warning. YOU HAVE
       BEEN WARNED.

   TIME
       The NET TIME command allows you to view the time on a remote server or synchronise the
       time on the local server with the time on the remote server.

   TIME
       Without any options, the NET TIME command displays the time on the remote server. The
       remote server must be specified with the -S option.

   TIME SYSTEM
       Displays the time on the remote server in a format ready for /bin/date. The remote server
       must be specified with the -S option.

   TIME SET
       Tries to set the date and time of the local server to that on the remote server using
       /bin/date. The remote server must be specified with the -S option.

   TIME ZONE
       Displays the timezone in hours from GMT on the remote server. The remote server must be
       specified with the -S option.

   [RPC|ADS] JOIN [TYPE] [-U username[%password]] [createupn=UPN] [createcomputer=OU]
       [machinepass=PASS] [osName=string osVer=string] [options]
       Join a domain. If the account already exists on the server, and [TYPE] is MEMBER, the
       machine will attempt to join automatically. (Assuming that the machine has been created in
       server manager) Otherwise, a password will be prompted for, and a new account may be
       created.

       [TYPE] may be PDC, BDC or MEMBER to specify the type of server joining the domain.

       [UPN] (ADS only) set the principalname attribute during the join. The default format is
       host/netbiosname@REALM.

       [OU] (ADS only) Precreate the computer account in a specific OU. The OU string reads from
       top to bottom without RDNs, and is delimited by a '/'. Please note that '\' is used for
       escape by both the shell and ldap, so it may need to be doubled or quadrupled to pass
       through, and it is not used as a delimiter.

       [PASS] (ADS only) Set a specific password on the computer account being created by the
       join.

       [osName=string osVer=String] (ADS only) Set the operatingSystem and operatingSystemVersion
       attribute during the join. Both parameters must be specified for either to take effect.

   [RPC] OLDJOIN [options]
       Join a domain. Use the OLDJOIN option to join the domain using the old style of domain
       joining - you need to create a trust account in server manager first.

   [RPC|ADS] USER
   [RPC|ADS] USER
       List all users

   [RPC|ADS] USER DELETE target
       Delete specified user

   [RPC|ADS] USER INFO target
       List the domain groups of the specified user.

   [RPC|ADS] USER RENAME oldname newname
       Rename specified user.

   [RPC|ADS] USER ADD name [password] [-F user flags] [-C comment]
       Add specified user.

   [RPC|ADS] GROUP
   [RPC|ADS] GROUP [misc options] [targets]
       List user groups.

   [RPC|ADS] GROUP DELETE name [misc. options]
       Delete specified group.

   [RPC|ADS] GROUP ADD name [-C comment]
       Create specified group.

   [RAP|RPC] SHARE
   [RAP|RPC] SHARE [misc. options] [targets]
       Enumerates all exported resources (network shares) on target server.

   [RAP|RPC] SHARE ADD name=serverpath [-C comment] [-M maxusers] [targets]
       Adds a share from a server (makes the export active). Maxusers specifies the number of
       users that can be connected to the share simultaneously.

   SHARE DELETE sharename
       Delete specified share.

   [RPC|RAP] FILE
   [RPC|RAP] FILE
       List all open files on remote server.

   [RPC|RAP] FILE CLOSE fileid
       Close file with specified fileid on remote server.

   [RPC|RAP] FILE INFO fileid
       Print information on specified fileid. Currently listed are: file-id, username, locks,
       path, permissions.

   [RAP|RPC] FILE USER user
       List files opened by specified user. Please note that net rap file user does not work
       against Samba servers.

   SESSION
   RAP SESSION
       Without any other options, SESSION enumerates all active SMB/CIFS sessions on the target
       server.

   RAP SESSION DELETE|CLOSE CLIENT_NAME
       Close the specified sessions.

   RAP SESSION INFO CLIENT_NAME
       Give a list with all the open files in specified session.

   RAP SERVER DOMAIN
       List all servers in specified domain or workgroup. Defaults to local domain.

   RAP DOMAIN
       Lists all domains and workgroups visible on the current network.

   RAP PRINTQ
   RAP PRINTQ INFO QUEUE_NAME
       Lists the specified print queue and print jobs on the server. If the QUEUE_NAME is
       omitted, all queues are listed.

   RAP PRINTQ DELETE JOBID
       Delete job with specified id.

   RAP VALIDATE user [password]
       Validate whether the specified user can log in to the remote server. If the password is
       not specified on the commandline, it will be prompted.

           Note
           Currently NOT implemented.

   RAP GROUPMEMBER
   RAP GROUPMEMBER LIST GROUP
       List all members of the specified group.

   RAP GROUPMEMBER DELETE GROUP USER
       Delete member from group.

   RAP GROUPMEMBER ADD GROUP USER
       Add member to group.

   RAP ADMIN command
       Execute the specified command on the remote server. Only works with OS/2 servers.

           Note
           Currently NOT implemented.

   RAP SERVICE
   RAP SERVICE START NAME [arguments...]
       Start the specified service on the remote server. Not implemented yet.

           Note
           Currently NOT implemented.

   RAP SERVICE STOP
       Stop the specified service on the remote server.

           Note
           Currently NOT implemented.

   RAP PASSWORD USER OLDPASS NEWPASS
       Change password of USER from OLDPASS to NEWPASS.

   LOOKUP
   LOOKUP HOST HOSTNAME [TYPE]
       Lookup the IP address of the given host with the specified type (netbios suffix). The type
       defaults to 0x20 (workstation).

   LOOKUP LDAP [DOMAIN]
       Give IP address of LDAP server of specified DOMAIN. Defaults to local domain.

   LOOKUP KDC [REALM]
       Give IP address of KDC for the specified REALM. Defaults to local realm.

   LOOKUP DC [DOMAIN]
       Give IP's of Domain Controllers for specified
        DOMAIN. Defaults to local domain.

   LOOKUP MASTER DOMAIN
       Give IP of master browser for specified DOMAIN or workgroup. Defaults to local domain.

   CACHE
       Samba uses a general caching interface called 'gencache'. It can be controlled using 'NET
       CACHE'.

       All the timeout parameters support the suffixes:
           s - Seconds
           m - Minutes
           h - Hours
           d - Days
           w - Weeks

   CACHE ADD key data time-out
       Add specified key+data to the cache with the given timeout.

   CACHE DEL key
       Delete key from the cache.

   CACHE SET key data time-out
       Update data of existing cache entry.

   CACHE SEARCH PATTERN
       Search for the specified pattern in the cache data.

   CACHE LIST
       List all current items in the cache.

   CACHE FLUSH
       Remove all the current items from the cache.

   GETLOCALSID [DOMAIN]
       Prints the SID of the specified domain, or if the parameter is omitted, the SID of the
       local server.

   SETLOCALSID S-1-5-21-x-y-z
       Sets SID for the local server to the specified SID.

   GETDOMAINSID
       Prints the local machine SID and the SID of the current domain.

   SETDOMAINSID
       Sets the SID of the current domain.

   GROUPMAP
       Manage the mappings between Windows group SIDs and UNIX groups. Common options include:

       •   unixgroup - Name of the UNIX group

       •   ntgroup - Name of the Windows NT group (must be resolvable to a SID

       •   rid - Unsigned 32-bit integer

       •   sid - Full SID in the form of "S-1-..."

       •   type - Type of the group; either 'domain', 'local', or 'builtin'

       •   comment - Freeform text description of the group

   GROUPMAP ADD
       Add a new group mapping entry:

           net groupmap add {rid=int|sid=string} unixgroup=string \
                [type={domain|local}] [ntgroup=string] [comment=string]

   GROUPMAP DELETE
       Delete a group mapping entry. If more than one group name matches, the first entry found
       is deleted.

       net groupmap delete {ntgroup=string|sid=SID}

   GROUPMAP MODIFY
       Update an existing group entry.

           net groupmap modify {ntgroup=string|sid=SID} [unixgroup=string] \
                  [comment=string] [type={domain|local}]

   GROUPMAP LIST
       List existing group mapping entries.

       net groupmap list [verbose] [ntgroup=string] [sid=SID]

   MAXRID
       Prints out the highest RID currently in use on the local server (by the active 'passdb
       backend').

   RPC INFO
       Print information about the domain of the remote server, such as domain name, domain sid
       and number of users and groups.

   [RPC|ADS] TESTJOIN
       Check whether participation in a domain is still valid.

   [RPC|ADS] CHANGETRUSTPW
       Force change of domain trust password.

   RPC TRUSTDOM
   RPC TRUSTDOM ADD DOMAIN
       Add a interdomain trust account for DOMAIN. This is in fact a Samba account named DOMAIN$
       with the account flag 'I' (interdomain trust account). This is required for incoming
       trusts to work. It makes Samba be a trusted domain of the foreign (trusting) domain. Users
       of the Samba domain will be made available in the foreign domain. If the command is used
       against localhost it has the same effect as smbpasswd -a -i DOMAIN. Please note that both
       commands expect a appropriate UNIX account.

   RPC TRUSTDOM DEL DOMAIN
       Remove interdomain trust account for DOMAIN. If it is used against localhost it has the
       same effect as smbpasswd -x DOMAIN$.

   RPC TRUSTDOM ESTABLISH DOMAIN
       Establish a trust relationship to a trusted domain. Interdomain account must already be
       created on the remote PDC. This is required for outgoing trusts to work. It makes Samba be
       a trusting domain of a foreign (trusted) domain. Users of the foreign domain will be made
       available in our domain. You'll need winbind and a working idmap config to make them
       appear in your system.

   RPC TRUSTDOM REVOKE DOMAIN
       Abandon relationship to trusted domain

   RPC TRUSTDOM LIST
       List all interdomain trust relationships.

   RPC TRUST
   RPC TRUST CREATE
       Create a trust object by calling lsaCreateTrustedDomainEx2. The can be done on a single
       server or on two servers at once with the possibility to use a random trust password.

       Options:

       otherserver
           Domain controller of the second domain

       otheruser
           Admin user in the second domain

       otherdomainsid
           SID of the second domain

       other_netbios_domain
           NetBIOS (short) name of the second domain

       otherdomain
           DNS (full) name of the second domain

       trustpw
           Trust password

       Examples:

       Create a trust object on srv1.dom1.dom for the domain dom2

               net rpc trust create \
                   otherdomainsid=S-x-x-xx-xxxxxxxxxx-xxxxxxxxxx-xxxxxxxxx \
                   other_netbios_domain=dom2 \
                   otherdomain=dom2.dom \
                   trustpw=12345678 \
                   -S srv1.dom1.dom

       Create a trust relationship between dom1 and dom2

               net rpc trust create \
                   otherserver=srv2.dom2.test \
                   otheruser=dom2adm \
                   -S srv1.dom1.dom

   RPC TRUST DELETE
       Delete a trust object by calling lsaDeleteTrustedDomain. The can be done on a single
       server or on two servers at once.

       Options:

       otherserver
           Domain controller of the second domain

       otheruser
           Admin user in the second domain

       otherdomainsid
           SID of the second domain

       Examples:

       Delete a trust object on srv1.dom1.dom for the domain dom2

               net rpc trust delete \
                   otherdomainsid=S-x-x-xx-xxxxxxxxxx-xxxxxxxxxx-xxxxxxxxx \
                   -S srv1.dom1.dom

       Delete a trust relationship between dom1 and dom2

               net rpc trust delete \
                   otherserver=srv2.dom2.test \
                   otheruser=dom2adm \
                   -S srv1.dom1.dom

   RPC RIGHTS
       This subcommand is used to view and manage Samba's rights assignments (also referred to as
       privileges). There are three options currently available: list, grant, and revoke. More
       details on Samba's privilege model and its use can be found in the Samba-HOWTO-Collection.

   RPC ABORTSHUTDOWN
       Abort the shutdown of a remote server.

   RPC SHUTDOWN [-t timeout] [-r] [-f] [-C message]
       Shut down the remote server.

       -r
           Reboot after shutdown.

       -f
           Force shutting down all applications.

       -t timeout
           Timeout before system will be shut down. An interactive user of the system can use
           this time to cancel the shutdown.

       -C message
           Display the specified message on the screen to announce the shutdown.

   RPC SAMDUMP
       Print out sam database of remote server. You need to run this against the PDC, from a
       Samba machine joined as a BDC.

   RPC VAMPIRE
       Export users, aliases and groups from remote server to local server. You need to run this
       against the PDC, from a Samba machine joined as a BDC. This vampire command cannot be used
       against an Active Directory, only against an NT4 Domain Controller.

   RPC VAMPIRE KEYTAB
       Dump remote SAM database to local Kerberos keytab file.

   RPC VAMPIRE LDIF
       Dump remote SAM database to local LDIF file or standard output.

   RPC GETSID
       Fetch domain SID and store it in the local secrets.tdb.

   ADS LEAVE
       Make the remote host leave the domain it is part of.

   ADS STATUS
       Print out status of machine account of the local machine in ADS. Prints out quite some
       debug info. Aimed at developers, regular users should use NET ADS TESTJOIN.

   ADS PRINTER
   ADS PRINTER INFO [PRINTER] [SERVER]
       Lookup info for PRINTER on SERVER. The printer name defaults to "*", the server name
       defaults to the local host.

   ADS PRINTER PUBLISH PRINTER
       Publish specified printer using ADS.

   ADS PRINTER REMOVE PRINTER
       Remove specified printer from ADS directory.

   ADS SEARCH EXPRESSION ATTRIBUTES...
       Perform a raw LDAP search on a ADS server and dump the results. The expression is a
       standard LDAP search expression, and the attributes are a list of LDAP fields to show in
       the results.

       Example: net ads search '(objectCategory=group)' sAMAccountName

   ADS DN DN (attributes)
       Perform a raw LDAP search on a ADS server and dump the results. The DN standard LDAP DN,
       and the attributes are a list of LDAP fields to show in the result.

       Example: net ads dn 'CN=administrator,CN=Users,DC=my,DC=domain' SAMAccountName

   ADS WORKGROUP
       Print out workgroup name for specified kerberos realm.

   ADS ENCTYPES
       List, modify or delete the value of the "msDS-SupportedEncryptionTypes" attribute of an
       account in AD.

       This attribute allows to control which Kerberos encryption types are used for the
       generation of initial and service tickets. The value consists of an integer bitmask with
       the following values:

       0x00000001 DES-CBC-CRC

       0x00000002 DES-CBC-MD5

       0x00000004 RC4-HMAC

       0x00000008 AES128-CTS-HMAC-SHA1-96

       0x00000010 AES256-CTS-HMAC-SHA1-96

   ADS ENCTYPES LIST <ACCOUNTNAME>
       List the value of the "msDS-SupportedEncryptionTypes" attribute of a given account.

       Example: net ads enctypes list Computername

   ADS ENCTYPES SET <ACCOUNTNAME> [enctypes]
       Set the value of the "msDS-SupportedEncryptionTypes" attribute of the LDAP object of
       ACCOUNTNAME to a given value. If the value is ommitted, the value is set to 31 which
       enables all the currently supported encryption types.

       Example: net ads enctypes set Computername 24

   ADS ENCTYPES DELETE <ACCOUNTNAME>
       Deletes the "msDS-SupportedEncryptionTypes" attribute of the LDAP object of ACCOUNTNAME.

       Example: net ads enctypes set Computername 24

   SAM CREATEBUILTINGROUP <NAME>
       (Re)Create a BUILTIN group. Only a wellknown set of BUILTIN groups can be created with
       this command. This is the list of currently recognized group names: Administrators, Users,
       Guests, Power Users, Account Operators, Server Operators, Print Operators, Backup
       Operators, Replicator, RAS Servers, Pre-Windows 2000 compatible Access. This command
       requires a running Winbindd with idmap allocation properly configured. The group gid will
       be allocated out of the winbindd range.

   SAM CREATELOCALGROUP <NAME>
       Create a LOCAL group (also known as Alias). This command requires a running Winbindd with
       idmap allocation properly configured. The group gid will be allocated out of the winbindd
       range.

   SAM DELETELOCALGROUP <NAME>
       Delete an existing LOCAL group (also known as Alias).

   SAM MAPUNIXGROUP <NAME>
       Map an existing Unix group and make it a Domain Group, the domain group will have the same
       name.

   SAM UNMAPUNIXGROUP <NAME>
       Remove an existing group mapping entry.

   SAM ADDMEM <GROUP> <MEMBER>
       Add a member to a Local group. The group can be specified only by name, the member can be
       specified by name or SID.

   SAM DELMEM <GROUP> <MEMBER>
       Remove a member from a Local group. The group and the member must be specified by name.

   SAM LISTMEM <GROUP>
       List Local group members. The group must be specified by name.

   SAM LIST <users|groups|localgroups|builtin|workstations> [verbose]
       List the specified set of accounts by name. If verbose is specified, the rid and
       description is also provided for each account.

   SAM RIGHTS LIST
       List all available privileges.

   SAM RIGHTS GRANT <NAME> <PRIVILEGE>
       Grant one or more privileges to a user.

   SAM RIGHTS REVOKE <NAME> <PRIVILEGE>
       Revoke one or more privileges from a user.

   SAM SHOW <NAME>
       Show the full DOMAIN\\NAME the SID and the type for the corresponding account.

   SAM SET HOMEDIR <NAME> <DIRECTORY>
       Set the home directory for a user account.

   SAM SET PROFILEPATH <NAME> <PATH>
       Set the profile path for a user account.

   SAM SET COMMENT <NAME> <COMMENT>
       Set the comment for a user or group account.

   SAM SET FULLNAME <NAME> <FULL NAME>
       Set the full name for a user account.

   SAM SET LOGONSCRIPT <NAME> <SCRIPT>
       Set the logon script for a user account.

   SAM SET HOMEDRIVE <NAME> <DRIVE>
       Set the home drive for a user account.

   SAM SET WORKSTATIONS <NAME> <WORKSTATIONS>
       Set the workstations a user account is allowed to log in from.

   SAM SET DISABLE <NAME>
       Set the "disabled" flag for a user account.

   SAM SET PWNOTREQ <NAME>
       Set the "password not required" flag for a user account.

   SAM SET AUTOLOCK <NAME>
       Set the "autolock" flag for a user account.

   SAM SET PWNOEXP <NAME>
       Set the "password do not expire" flag for a user account.

   SAM SET PWDMUSTCHANGENOW <NAME> [yes|no]
       Set or unset the "password must change" flag for a user account.

   SAM POLICY LIST
       List the available account policies.

   SAM POLICY SHOW <account policy>
       Show the account policy value.

   SAM POLICY SET <account policy> <value>
       Set a value for the account policy. Valid values can be: "forever", "never", "off", or a
       number.

   SAM PROVISION
       Only available if ldapsam:editposix is set and winbindd is running. Properly populates the
       ldap tree with the basic accounts (Administrator) and groups (Domain Users, Domain Admins,
       Domain Guests) on the ldap tree.

   IDMAP DUMP <local tdb file name>
       Dumps the mappings contained in the local tdb file specified. This command is useful to
       dump only the mappings produced by the idmap_tdb backend.

   IDMAP RESTORE [input file]
       Restore the mappings from the specified file or stdin.

   IDMAP SET SECRET <DOMAIN> <secret>
       Store a secret for the specified domain, used primarily for domains that use idmap_ldap as
       a backend. In this case the secret is used as the password for the user DN used to bind to
       the ldap server.

   IDMAP SET RANGE <RANGE> <SID> [index] [--db=<DB>]
       Store a domain-range mapping for a given domain (and index) in autorid database.

   IDMAP SET CONFIG <config> [--db=<DB>]
       Update CONFIG entry in autorid database.

   IDMAP GET RANGE <SID> [index] [--db=<DB>]
       Get the range for a given domain and index from autorid database.

   IDMAP GET RANGES [<SID>] [--db=<DB>]
       Get ranges for all domains or for one identified by given SID.

   IDMAP GET CONFIG [--db=<DB>]
       Get CONFIG entry from autorid database.

   IDMAP DELETE MAPPING [-f] [--db=<DB>] <ID>
       Delete a mapping sid <-> gid or sid <-> uid from the IDMAP database. The mapping is given
       by <ID> which may either be a sid: S-x-..., a gid: "GID number" or a uid: "UID number".
       Use -f to delete an invalid partial mapping <ID> -> xx

       Use "smbcontrol all idmap ..." to notify running smbd instances. See the smbcontrol(1)
       manpage for details.

   IDMAP DELETE RANGE [-f] [--db=<TDB>] <RANGE>|(<SID> [<INDEX>])
       Delete a domain range mapping identified by 'RANGE' or "domain SID and INDEX" from autorid
       database. Use -f to delete invalid mappings.

   IDMAP DELETE RANGES [-f] [--db=<TDB>] <SID>
       Delete all domain range mappings for a domain identified by SID. Use -f to delete invalid
       mappings.

   IDMAP CHECK [-v] [-r] [-a] [-T] [-f] [-l] [--db=<DB>]
       Check and repair the IDMAP database. If no option is given a read only check of the
       database is done. Among others an interactive or automatic repair mode may be chosen with
       one of the following options:

       -r|--repair
           Interactive repair mode, ask a lot of questions.

       -a|--auto
           Noninteractive repair mode, use default answers.

       -v|--verbose
           Produce more output.

       -f|--force
           Try to apply changes, even if they do not apply cleanly.

       -T|--test
           Dry run, show what changes would be made but don't touch anything.

       -l|--lock
           Lock the database while doing the check.

       --db <DB>
           Check the specified database.

       It reports about the finding of the following errors:

       Missing reverse mapping:
           A record with mapping A->B where there is no B->A. Default action in repair mode is to
           "fix" this by adding the reverse mapping.

       Invalid mapping:
           A record with mapping A->B where B->C. Default action is to "delete" this record.

       Missing or invalid HWM:
           A high water mark is not at least equal to the largest ID in the database. Default
           action is to "fix" this by setting it to the largest ID found +1.

       Invalid record:
           Something we failed to parse. Default action is to "edit" it in interactive and
           "delete" it in automatic mode.

   USERSHARE
       Starting with version 3.0.23, a Samba server now supports the ability for non-root users
       to add user defined shares to be exported using the "net usershare" commands.

       To set this up, first set up your smb.conf by adding to the [global] section: usershare
       path = /usr/local/samba/lib/usershares Next create the directory
       /usr/local/samba/lib/usershares, change the owner to root and set the group owner to the
       UNIX group who should have the ability to create usershares, for example a group called
       "serverops". Set the permissions on /usr/local/samba/lib/usershares to 01770. (Owner and
       group all access, no access for others, plus the sticky bit, which means that a file in
       that directory can be renamed or deleted only by the owner of the file). Finally, tell
       smbd how many usershares you will allow by adding to the [global] section of smb.conf a
       line such as : usershare max shares = 100. To allow 100 usershare definitions. Now,
       members of the UNIX group "serverops" can create user defined shares on demand using the
       commands below.

       The usershare commands are:
           net usershare add sharename path [comment [acl] [guest_ok=[y|n]]] - to add or change a
           user defined share.
           net usershare delete sharename - to delete a user defined share.
           net usershare info [-l|--long] [wildcard sharename] - to print info about a user
           defined share.
           net usershare list [-l|--long] [wildcard sharename] - to list user defined shares.

   USERSHARE ADD sharename path [comment] [acl] [guest_ok=[y|n]]
       Add or replace a new user defined share, with name "sharename".

       "path" specifies the absolute pathname on the system to be exported. Restrictions may be
       put on this, see the global smb.conf parameters: "usershare owner only", "usershare prefix
       allow list", and "usershare prefix deny list".

       The optional "comment" parameter is the comment that will appear on the share when browsed
       to by a client.

       The optional "acl" field specifies which users have read and write access to the entire
       share. Note that guest connections are not allowed unless the smb.conf parameter
       "usershare allow guests" has been set. The definition of a user defined share acl is:
       "user:permission", where user is a valid username on the system and permission can be "F",
       "R", or "D". "F" stands for "full permissions", ie. read and write permissions. "D" stands
       for "deny" for a user, ie. prevent this user from accessing this share. "R" stands for
       "read only", ie. only allow read access to this share (no creation of new files or
       directories or writing to files).

       The default if no "acl" is given is "Everyone:R", which means any authenticated user has
       read-only access.

       The optional "guest_ok" has the same effect as the parameter of the same name in smb.conf,
       in that it allows guest access to this user defined share. This parameter is only allowed
       if the global parameter "usershare allow guests" has been set to true in the smb.conf.

       There is no separate command to modify an existing user defined share, just use the "net
       usershare add [sharename]" command using the same sharename as the one you wish to modify
       and specify the new options you wish. The Samba smbd daemon notices user defined share
       modifications at connect time so will see the change immediately, there is no need to
       restart smbd on adding, deleting or changing a user defined share.

   USERSHARE DELETE sharename
       Deletes the user defined share by name. The Samba smbd daemon immediately notices this
       change, although it will not disconnect any users currently connected to the deleted
       share.

   USERSHARE INFO [-l|--long] [wildcard sharename]
       Get info on user defined shares owned by the current user matching the given pattern, or
       all users.

       net usershare info on its own dumps out info on the user defined shares that were created
       by the current user, or restricts them to share names that match the given wildcard
       pattern ('*' matches one or more characters, '?' matches only one character). If the '-l'
       or '--long' option is also given, it prints out info on user defined shares created by
       other users.

       The information given about a share looks like: [foobar] path=/home/jeremy comment=testme
       usershare_acl=Everyone:F guest_ok=n And is a list of the current settings of the user
       defined share that can be modified by the "net usershare add" command.

   USERSHARE LIST [-l|--long] wildcard sharename
       List all the user defined shares owned by the current user matching the given pattern, or
       all users.

       net usershare list on its own list out the names of the user defined shares that were
       created by the current user, or restricts the list to share names that match the given
       wildcard pattern ('*' matches one or more characters, '?' matches only one character). If
       the '-l' or '--long' option is also given, it includes the names of user defined shares
       created by other users.

   [RPC] CONF
       Starting with version 3.2.0, a Samba server can be configured by data stored in registry.
       This configuration data can be edited with the new "net conf" commands. There is also the
       possibility to configure a remote Samba server by enabling the RPC conf mode and
       specifying the address of the remote server.

       The deployment of this configuration data can be activated in two levels from the smb.conf
       file: Share definitions from registry are activated by setting registry shares to “yes” in
       the [global] section and global configuration options are activated by setting include =
       registry in the [global] section for a mixed configuration or by setting config backend =
       registry in the [global] section for a registry-only configuration. See the smb.conf(5)
       manpage for details.

       The conf commands are:
           net [rpc] conf list - Dump the complete configuration in smb.conf like format.
           net [rpc] conf import - Import configuration from file in smb.conf format.
           net [rpc] conf listshares - List the registry shares.
           net [rpc] conf drop - Delete the complete configuration from registry.
           net [rpc] conf showshare - Show the definition of a registry share.
           net [rpc] conf addshare - Create a new registry share.
           net [rpc] conf delshare - Delete a registry share.
           net [rpc] conf setparm - Store a parameter.
           net [rpc] conf getparm - Retrieve the value of a parameter.
           net [rpc] conf delparm - Delete a parameter.
           net [rpc] conf getincludes - Show the includes of a share definition.
           net [rpc] conf setincludes - Set includes for a share.
           net [rpc] conf delincludes - Delete includes from a share definition.

   [RPC] CONF LIST
       Print the configuration data stored in the registry in a smb.conf-like format to standard
       output.

   [RPC] CONF IMPORT [--test|-T] filename [section]
       This command imports configuration from a file in smb.conf format. If a section
       encountered in the input file is present in registry, its contents is replaced. Sections
       of registry configuration that have no counterpart in the input file are not affected. If
       you want to delete these, you will have to use the "net conf drop" or "net conf delshare"
       commands. Optionally, a section may be specified to restrict the effect of the import
       command to that specific section. A test mode is enabled by specifying the parameter "-T"
       on the commandline. In test mode, no changes are made to the registry, and the resulting
       configuration is printed to standard output instead.

   [RPC] CONF LISTSHARES
       List the names of the shares defined in registry.

   [RPC] CONF DROP
       Delete the complete configuration data from registry.

   [RPC] CONF SHOWSHARE sharename
       Show the definition of the share or section specified. It is valid to specify "global" as
       sharename to retrieve the global configuration options from registry.

   [RPC] CONF ADDSHARE sharename path [writeable={y|N} [guest_ok={y|N} [comment]]]
       Create a new share definition in registry. The sharename and path have to be given. The
       share name may not be "global". Optionally, values for the very common options
       "writeable", "guest ok" and a "comment" may be specified. The same result may be obtained
       by a sequence of "net conf setparm" commands.

   [RPC] CONF DELSHARE sharename
       Delete a share definition from registry.

   [RPC] CONF SETPARM section parameter value
       Store a parameter in registry. The section may be global or a sharename. The section is
       created if it does not exist yet.

   [RPC] CONF GETPARM section parameter
       Show a parameter stored in registry.

   [RPC] CONF DELPARM section parameter
       Delete a parameter stored in registry.

   [RPC] CONF GETINCLUDES section
       Get the list of includes for the provided section (global or share).

       Note that due to the nature of the registry database and the nature of include directives,
       the includes need special treatment: Parameters are stored in registry by the parameter
       name as valuename, so there is only ever one instance of a parameter per share. Also, a
       specific order like in a text file is not guaranteed. For all real parameters, this is
       perfectly ok, but the include directive is rather a meta parameter, for which, in the
       smb.conf text file, the place where it is specified between the other parameters is very
       important. This can not be achieved by the simple registry smbconf data model, so there is
       one ordered list of includes per share, and this list is evaluated after all the
       parameters of the share.

       Further note that currently, only files can be included from registry configuration. In
       the future, there will be the ability to include configuration data from other registry
       keys.

   [RPC] CONF SETINCLUDES section [filename]+
       Set the list of includes for the provided section (global or share) to the given list of
       one or more filenames. The filenames may contain the usual smb.conf macros like %I.

   [RPC] CONF DELINCLUDES section
       Delete the list of includes from the provided section (global or share).

   REGISTRY
       Manipulate Samba's registry.

       The registry commands are:
           net registry enumerate   - Enumerate registry keys and values.
           net registry enumerate_recursive - Enumerate registry key and its subkeys.
           net registry createkey   - Create a new registry key.
           net registry deletekey   - Delete a registry key.
           net registry deletekey_recursive - Delete a registry key with subkeys.
           net registry getvalue    - Print a registry value.
           net registry getvalueraw - Print a registry value (raw format).
           net registry setvalue    - Set a new registry value.
           net registry increment   - Increment a DWORD registry value under a lock.
           net registry deletevalue - Delete a registry value.
           net registry getsd       - Get security descriptor.
           net registry getsd_sdd1  - Get security descriptor in sddl format.
           net registry setsd_sdd1  - Set security descriptor from sddl format string.
           net registry import      - Import a registration entries (.reg) file.
           net registry export      - Export a registration entries (.reg) file.
           net registry convert     - Convert a registration entries (.reg) file.
           net registry check       - Check and repair a registry database.

   REGISTRY ENUMERATE key
       Enumerate subkeys and values of key.

   REGISTRY ENUMERATE_RECURSIVE key
       Enumerate values of key and its subkeys.

   REGISTRY CREATEKEY key
       Create a new key if not yet existing.

   REGISTRY DELETEKEY key
       Delete the given key and its values from the registry, if it has no subkeys.

   REGISTRY DELETEKEY_RECURSIVE key
       Delete the given key and all of its subkeys and values from the registry.

   REGISTRY GETVALUE key name
       Output type and actual value of the value name of the given key.

   REGISTRY GETVALUERAW key name
       Output the actual value of the value name of the given key.

   REGISTRY SETVALUE key name type value ...
       Set the value name of an existing key.  type may be one of sz, multi_sz or dword. In case
       of multi_szvalue may be given multiple times.

   REGISTRY INCREMENT key name [inc]
       Increment the DWORD value name of key by inc while holding a g_lock.  inc defaults to 1.

   REGISTRY DELETEVALUE key name
       Delete the value name of the given key.

   REGISTRY GETSD key
       Get the security descriptor of the given key.

   REGISTRY GETSD_SDDL key
       Get the security descriptor of the given key as a Security Descriptor Definition Language
       (SDDL) string.

   REGISTRY SETSD_SDDL keysd
       Set the security descriptor of the given key from a Security Descriptor Definition
       Language (SDDL) string sd.

   REGISTRY IMPORT file [--precheck <check-file>] [opt]
       Import a registration entries (.reg) file.

       The following options are available:

       --precheck check-file
           This is a mechanism to check the existence or non-existence of certain keys or values
           specified in a precheck file before applying the import file. The import file will
           only be applied if the precheck succeeds.

           The check-file follows the normal registry file syntax with the following semantics:

           •   <value name>=<value> checks whether the value exists and has the given value.

           •   <value name>=- checks whether the value does not exist.

           •   [key] checks whether the key exists.

           •   [-key] checks whether the key does not exist.

   REGISTRY EXPORT keyfile[opt]
       Export a key to a registration entries (.reg) file.

   REGISTRY CONVERT in out [[inopt] outopt]
       Convert a registration entries (.reg) file in.

   REGISTRY CHECK [-ravTl] [-o <ODB>] [--wipe] [<DB>]
       Check and repair the registry database. If no option is given a read only check of the
       database is done. Among others an interactive or automatic repair mode may be chosen with
       one of the following options

       -r|--repair
           Interactive repair mode, ask a lot of questions.

       -a|--auto
           Noninteractive repair mode, use default answers.

       -v|--verbose
           Produce more output.

       -T|--test
           Dry run, show what changes would be made but don't touch anything.

       -l|--lock
           Lock the database while doing the check.

       --reg-version={1,2,3}
           Specify the format of the registry database. If not given it defaults to the value of
           the binary or, if an registry.tdb is explizitly stated at the commandline, to the
           value found in the INFO/version record.

       [--db] <DB>
           Check the specified database.

       -o|--output <ODB>
           Create a new registry database <ODB> instead of modifying the input. If <ODB> is
           already existing --wipe may be used to overwrite it.

       --wipe
           Replace the registry database instead of modifying the input or overwrite an existing
           output database.

   EVENTLOG
       Starting with version 3.4.0 net can read, dump, import and export native win32 eventlog
       files (usually *.evt). evt files are used by the native Windows eventviewer tools.

       The import and export of evt files can only succeed when eventlog list is used in smb.conf
       file. See the smb.conf(5) manpage for details.

       The eventlog commands are:
           net eventlog dump - Dump a eventlog *.evt file on the screen.
           net eventlog import - Import a eventlog *.evt into the samba internal tdb based
           representation of eventlogs.
           net eventlog export - Export the samba internal tdb based representation of eventlogs
           into an eventlog *.evt file.

   EVENTLOG DUMP filename
       Prints a eventlog *.evt file to standard output.

   EVENTLOG IMPORT filename eventlog
       Imports a eventlog *.evt file defined by filename into the samba internal tdb
       representation of eventlog defined by eventlog.  eventlog needs to part of the eventlog
       list defined in smb.conf. See the smb.conf(5) manpage for details.

   EVENTLOG EXPORT filename eventlog
       Exports the samba internal tdb representation of eventlog defined by eventlog to a
       eventlog *.evt file defined by filename.  eventlog needs to part of the eventlog list
       defined in smb.conf. See the smb.conf(5) manpage for details.

   DOM
       Starting with version 3.2.0 Samba has support for remote join and unjoin APIs, both client
       and server-side. Windows supports remote join capabilities since Windows 2000.

       In order for Samba to be joined or unjoined remotely an account must be used that is
       either member of the Domain Admins group, a member of the local Administrators group or a
       user that is granted the SeMachineAccountPrivilege privilege.

       The client side support for remote join is implemented in the net dom commands which are:
           net dom join - Join a remote computer into a domain.
           net dom unjoin - Unjoin a remote computer from a domain.
           net dom renamecomputer - Renames a remote computer joined to a domain.

   DOM JOIN  domain=DOMAIN ou=OU account=ACCOUNT password=PASSWORD reboot
       Joins a computer into a domain. This command supports the following additional parameters:

       •   DOMAIN can be a NetBIOS domain name (also known as short domain name) or a DNS domain
           name for Active Directory Domains. As in Windows, it is also possible to control which
           Domain Controller to use. This can be achieved by appending the DC name using the \
           separator character. Example: MYDOM\MYDC. The DOMAIN parameter cannot be NULL.

       •   OU can be set to a RFC 1779 LDAP DN, like ou=mymachines,cn=Users,dc=example,dc=com in
           order to create the machine account in a non-default LDAP container. This optional
           parameter is only supported when joining Active Directory Domains.

       •   ACCOUNT defines a domain account that will be used to join the machine to the domain.
           This domain account needs to have sufficient privileges to join machines.

       •   PASSWORD defines the password for the domain account defined with ACCOUNT.

       •   REBOOT is an optional parameter that can be set to reboot the remote machine after
           successful join to the domain.

       Note that you also need to use standard net parameters to connect and authenticate to the
       remote machine that you want to join. These additional parameters include: -S computer and
       -U user.

       Example: net dom join -S xp -U XP\\administrator%secret domain=MYDOM
       account=MYDOM\\administrator password=topsecret reboot.

       This example would connect to a computer named XP as the local administrator using
       password secret, and join the computer into a domain called MYDOM using the MYDOM domain
       administrator account and password topsecret. After successful join, the computer would
       reboot.

   DOM UNJOIN account=ACCOUNT password=PASSWORD reboot
       Unjoins a computer from a domain. This command supports the following additional
       parameters:

       •   ACCOUNT defines a domain account that will be used to unjoin the machine from the
           domain. This domain account needs to have sufficient privileges to unjoin machines.

       •   PASSWORD defines the password for the domain account defined with ACCOUNT.

       •   REBOOT is an optional parameter that can be set to reboot the remote machine after
           successful unjoin from the domain.

       Note that you also need to use standard net parameters to connect and authenticate to the
       remote machine that you want to unjoin. These additional parameters include: -S computer
       and -U user.

       Example: net dom unjoin -S xp -U XP\\administrator%secret account=MYDOM\\administrator
       password=topsecret reboot.

       This example would connect to a computer named XP as the local administrator using
       password secret, and unjoin the computer from the domain using the MYDOM domain
       administrator account and password topsecret. After successful unjoin, the computer would
       reboot.

   DOM RENAMECOMPUTER newname=NEWNAME account=ACCOUNT password=PASSWORD reboot
       Renames a computer that is joined to a domain. This command supports the following
       additional parameters:

       •   NEWNAME defines the new name of the machine in the domain.

       •   ACCOUNT defines a domain account that will be used to rename the machine in the
           domain. This domain account needs to have sufficient privileges to rename machines.

       •   PASSWORD defines the password for the domain account defined with ACCOUNT.

       •   REBOOT is an optional parameter that can be set to reboot the remote machine after
           successful rename in the domain.

       Note that you also need to use standard net parameters to connect and authenticate to the
       remote machine that you want to rename in the domain. These additional parameters include:
       -S computer and -U user.

       Example: net dom renamecomputer -S xp -U XP\\administrator%secret newname=XPNEW
       account=MYDOM\\administrator password=topsecret reboot.

       This example would connect to a computer named XP as the local administrator using
       password secret, and rename the joined computer to XPNEW using the MYDOM domain
       administrator account and password topsecret. After successful rename, the computer would
       reboot.

   G_LOCK
       Manage global locks.

   G_LOCK DO lockname timeout command
       Execute a shell command under a global lock. This might be useful to define the order in
       which several shell commands will be executed. The locking information is stored in a file
       called g_lock.tdb. In setups with CTDB running, the locking information will be available
       on all cluster nodes.

       •   LOCKNAME defines the name of the global lock.

       •   TIMEOUT defines the timeout.

       •   COMMAND defines the shell command to execute.

   G_LOCK LOCKS
       Print a list of all currently existing locknames.

   G_LOCK DUMP lockname
       Dump the locking table of a certain global lock.

   HELP [COMMAND]
       Gives usage information for the specified command.

VERSION

       This man page is complete for version 3 of the Samba suite.

AUTHOR

       The original Samba software and related utilities were created by Andrew Tridgell. Samba
       is now developed by the Samba Team as an Open Source project similar to the way the Linux
       kernel is developed.

       The net manpage was written by Jelmer Vernooij.