Provided by: gnuspool_1.7ubuntu1_amd64 
NAME
xtlhp - hpnpf protocol server driver
SYNOPSIS
xtlhp -h hostname -p port [ -d n ] [ -f file ] [ -c file ] [ -l log ] [ -b blksize ] [ -c community ] [
-T timeout ] [ -S snmp ] [ -D n ]
DESCRIPTION
xtlhp is a terminal server program for use by GNUspool where the destination is an HPNPF server.
Alternatively other printer devices which accept input using "reverse telnet" and allow status to be
interrogated via SNMP (or other means) may be driven.
After each block is transmitted, the status of the printer is interrogated using a supplied control
script.
Versions of xtlhp after 23.6 perform SNMP operations directly, rather than relying on an external program
being available.
OPTIONS
-h hostname
This is the host name or IP address to be used to access the printer. In GNUspool setup files, it
may be appropriate to substitute $SPOOLDEV or $SPOOLPTR here.
-p port number
This is the port number or service port name to be used.
-f configname
This is the location of the definitions file, if not xtsnmpdef in the GNUspool internal programs
directory.
-c file Specifies a control file for obtaining the printer status. See the CONTROL FILE section below.
-l logfile
Specify error message destination if not standard error.
-b n Specify output block size. n may be a number, or followed by b, k, m or g to denote blocks,
kilobytes, megabytes or gigabytes.
Otherwise a default block size of 10K is assumed.
-d n Debug. Displays activities on standard error, if n is greater than zero. Higher values of n will
give more output, including tracing of SNMP operations.
-D n As for -d, except that no output is attempted, the control script is executed once only and the
appropriate exit code returned. Use an argument of zero to just invoke the script and exit.
-c name Specify the community in SNMP operations. The default is public.
-T timeout
Specify the timeout to wait for SNMP replies. The default is 1 second, but the value given may be
fractional.
-S snmp Specify the SNMP port name to use, if not "snmp".
CONFIGURATION FILE
The configuration file xtsmnpdef provides a series of mnemonics for the SNMP definition of the form:
system 1.3.6.1.4.1.11.2
gdStatusBytes system.3.9.1.1.1
The function of these definitions is to "macrogenerate" constructs which appear in the control file, for
example (with appropriate definitions)
gdStatusPaperOut.0
may be used as an abbreviation for
1.3.6.1.4.1.11.2.3.9.1.2.8.0
Previous versions of xtlhp expected quotes around the columns of the file, but this is no longer
expected. The file may define names in terms of previously-defined names and may redefine names. If a
name is redefined, names already defined using the previous definition are unaffected.
CONTROL FILE FORMAT
The control file consists of a series of command structures involving options to obtain SNMP values, run
commands, string and numeric comparisons and assignments.
Constructs are based upon the shell, but control names are in upper case.
Expressions
'string'
A single-quoted string is taken literally, as per the shell.
''string''
A string enclosed in double-quote characters is subject to name expansions of macros defined in
the configuration file and variables assigned in the script.
SNMPVAR(objid)
The specified objid, which may be specified using macros, is returned, treated as a numeric
value.
SNMPSTR(objid)
The specified objid, which may be specified using macros, is returned, treated as a string value.
`string`
A back-quoted string is a shell command to execute and the output taken as a string. Variable
names are expanded within the string before execution.
[string]
A string enclosed in square brackets is a shell command to execute, with the output taken to be a
decimal numeric value, the whole returning a numeric value. Variable names are expanded within
the string before execution.
{string}
A string enclosed in braces is a shell command to execute, with the output assumed to be a
hexadecimal value. (This is required for snmpinfo(8) on AIX systems, which returns hexadecimal
values). Variable names are expanded within the string before execution.
number a numeric value.
name The value currently assigned to name, if any, is the value of the expression.
LASTVAL The last SNMP value obtained (possibly using "DEFINED" or "UNDEFINED") as a numeric or string
value.
Constructs
The following constructs or "statements" are used in the control file.
= Assignment, as in
X = "ABC"
The value on the right is assigned to the name on the left.
:= One time assignment. As per assignment, but the operation is turned into a no-op after the first
execution.
For example
Host = `hostname`
would be evaluated each time the script is run (after every block), but
Host := `hostname`
would only be evaluated the first time.
comparison
Comparison of strings is performed with alphabetic operators LT, LE, EQ, NE, GE and GT, and
numerics with symbolic operators < etc.
DEFINED(objid)
Return a true value if the given object id (which may be specified using macros) is defined,
otherwise false. If the value is defined, LASTVAL is set to whatever value that was to save
further fetches.
UNDEFINED(objid)
As for DEFINED but the other truth value is returned. LASTVAL is still set if the value is
defined.
ISNUM value
Return a true value if the value is a number.
ISSTRING value
Return a true value if the value is a string.
AND OR "&&" "||"
Combine boolean operations in tests. AND is more binding than OR. "Short circuit" evaluation is
performed, so beware of relying on LASTVAL.
IF .. THEN .. [ELIF .. THEN ] [ELSE .. ] FI
Conditional construct with optional ELIF and ELSE parts.
MSG STRING
Display message on standard error.
EXIT number
Exit xtlhp with specified exit code (from 0 to 255).
FLUSH Send flush command (ESC-E) to socket.
EXAMPLE
This is the control file supplied by default, with definitions for "gdStatusLineState" etc being provided
in the definitions file supplied.
Note that if no EXIT appears, then script file has "succeeded" and output continues.
# Test the status to see if there are problems
IF SNMPVAR(gdStatusLineState.0) != 0
THEN
# Look at paper out indication and exit
# message
IF SNMPVAR(gdStatusPaperOut.0) != 0
THEN
MSG 'Out of paper'
EXIT 100
# Likewise paper jam
ELIF SNMPVAR(gdStatusPaperJam.0) != 0
THEN
MSG 'Out of paper'
EXIT 101
# Likewise toner low
ELIF SNMPVAR(gdStatusTonerLow.0) != 0
THEN
MSG 'Out of toner'
EXIT 102
# Give up just give general message
ELSE
MSG SNMPSTR(npSysStatusMessage.0)
EXIT 103
FI
FI
DIAGNOSTICS
xtlhp generates any appropriate diagnostics on standard error.
EXIT CODES
Normal termination is denoted by an exit code of zero.
Most of the other exit codes are determined by the control file and can be adjusted by the user as
required.
1 Usage error, invalid option etc.
2 Device error, cannot connect socket etc.
4 System error.
5 SNMP error.
SEE ALSO
xilp(8), xtelnet(8), xtftp(8), xtlpc(8).
COPYRIGHT
Copyright (c) 2009 Free Software Foundation, Inc. This is free software. You may redistribute copies of
it under the terms of the GNU General Public License <http://www.gnu.org/licenses/gpl.html>. There is NO
WARRANTY, to the extent permitted by law.
AUTHOR
John M Collins, Xi Software Ltd.
GNUspool Release 1 2009-11-16 XTLHP(8)