Provided by: perl_5.18.2-2ubuntu1.7_amd64 
NAME
enc2xs -- Perl Encode Module Generator
SYNOPSIS
enc2xs -[options]
enc2xs -M ModName mapfiles...
enc2xs -C
DESCRIPTION
enc2xs builds a Perl extension for use by Encode from either Unicode Character Mapping
files (.ucm) or Tcl Encoding Files (.enc). Besides being used internally during the build
process of the Encode module, you can use enc2xs to add your own encoding to perl. No
knowledge of XS is necessary.
Quick Guide
If you want to know as little about Perl as possible but need to add a new encoding, just
read this chapter and forget the rest.
0. Have a .ucm file ready. You can get it from somewhere or you can write your own from
scratch or you can grab one from the Encode distribution and customize it. For the
UCM format, see the next Chapter. In the example below, I'll call my theoretical
encoding myascii, defined in my.ucm. "$" is a shell prompt.
$ ls -F
my.ucm
1. Issue a command as follows;
$ enc2xs -M My my.ucm
generating Makefile.PL
generating My.pm
generating README
generating Changes
Now take a look at your current directory. It should look like this.
$ ls -F
Makefile.PL My.pm my.ucm t/
The following files were created.
Makefile.PL - MakeMaker script
My.pm - Encode submodule
t/My.t - test file
1.1.
If you want *.ucm installed together with the modules, do as follows;
$ mkdir Encode
$ mv *.ucm Encode
$ enc2xs -M My Encode/*ucm
2. Edit the files generated. You don't have to if you have no time AND no intention to
give it to someone else. But it is a good idea to edit the pod and to add more tests.
3. Now issue a command all Perl Mongers love:
$ perl Makefile.PL
Writing Makefile for Encode::My
4. Now all you have to do is make.
$ make
cp My.pm blib/lib/Encode/My.pm
/usr/local/bin/perl /usr/local/bin/enc2xs -Q -O \
-o encode_t.c -f encode_t.fnm
Reading myascii (myascii)
Writing compiled form
128 bytes in string tables
384 bytes (75%) saved spotting duplicates
1 bytes (0.775%) saved using substrings
....
chmod 644 blib/arch/auto/Encode/My/My.bs
$
The time it takes varies depending on how fast your machine is and how large your
encoding is. Unless you are working on something big like euc-tw, it won't take too
long.
5. You can "make install" already but you should test first.
$ make test
PERL_DL_NONLAZY=1 /usr/local/bin/perl -Iblib/arch -Iblib/lib \
-e 'use Test::Harness qw(&runtests $verbose); \
$verbose=0; runtests @ARGV;' t/*.t
t/My....ok
All tests successful.
Files=1, Tests=2, 0 wallclock secs
( 0.09 cusr + 0.01 csys = 0.09 CPU)
6. If you are content with the test result, just "make install"
7. If you want to add your encoding to Encode's demand-loading list (so you don't have to
"use Encode::YourEncoding"), run
enc2xs -C
to update Encode::ConfigLocal, a module that controls local settings. After that,
"use Encode;" is enough to load your encodings on demand.
The Unicode Character Map
Encode uses the Unicode Character Map (UCM) format for source character mappings. This
format is used by IBM's ICU package and was adopted by Nick Ing-Simmons for use with the
Encode module. Since UCM is more flexible than Tcl's Encoding Map and far more user-
friendly, this is the recommended format for Encode now.
A UCM file looks like this.
#
# Comments
#
<code_set_name> "US-ascii" # Required
<code_set_alias> "ascii" # Optional
<mb_cur_min> 1 # Required; usually 1
<mb_cur_max> 1 # Max. # of bytes/char
<subchar> \x3F # Substitution char
#
CHARMAP
<U0000> \x00 |0 # <control>
<U0001> \x01 |0 # <control>
<U0002> \x02 |0 # <control>
....
<U007C> \x7C |0 # VERTICAL LINE
<U007D> \x7D |0 # RIGHT CURLY BRACKET
<U007E> \x7E |0 # TILDE
<U007F> \x7F |0 # <control>
END CHARMAP
• Anything that follows "#" is treated as a comment.
• The header section continues until a line containing the word CHARMAP. This section
has a form of <keyword> value, one pair per line. Strings used as values must be
quoted. Barewords are treated as numbers. \xXX represents a byte.
Most of the keywords are self-explanatory. subchar means substitution character, not
subcharacter. When you decode a Unicode sequence to this encoding but no matching
character is found, the byte sequence defined here will be used. For most cases, the
value here is \x3F; in ASCII, this is a question mark.
• CHARMAP starts the character map section. Each line has a form as follows:
<UXXXX> \xXX.. |0 # comment
^ ^ ^
| | +- Fallback flag
| +-------- Encoded byte sequence
+-------------- Unicode Character ID in hex
The format is roughly the same as a header section except for the fallback flag: |
followed by 0..3. The meaning of the possible values is as follows:
|0 Round trip safe. A character decoded to Unicode encodes back to the same byte
sequence. Most characters have this flag.
|1 Fallback for unicode -> encoding. When seen, enc2xs adds this character for the
encode map only.
|2 Skip sub-char mapping should there be no code point.
|3 Fallback for encoding -> unicode. When seen, enc2xs adds this character for the
decode map only.
• And finally, END OF CHARMAP ends the section.
When you are manually creating a UCM file, you should copy ascii.ucm or an existing
encoding which is close to yours, rather than write your own from scratch.
When you do so, make sure you leave at least U0000 to U0020 as is, unless your environment
is EBCDIC.
CAVEAT: not all features in UCM are implemented. For example, icu:state is not used.
Because of that, you need to write a perl module if you want to support algorithmical
encodings, notably the ISO-2022 series. Such modules include Encode::JP::2022_JP,
Encode::KR::2022_KR, and Encode::TW::HZ.
Coping with duplicate mappings
When you create a map, you SHOULD make your mappings round-trip safe. That is,
"encode('your-encoding', decode('your-encoding', $data)) eq $data" stands for all
characters that are marked as "|0". Here is how to make sure:
• Sort your map in Unicode order.
• When you have a duplicate entry, mark either one with '|1' or '|3'.
• And make sure the '|1' or '|3' entry FOLLOWS the '|0' entry.
Here is an example from big5-eten.
<U2550> \xF9\xF9 |0
<U2550> \xA2\xA4 |3
Internally Encoding -> Unicode and Unicode -> Encoding Map looks like this;
E to U U to E
--------------------------------------
\xF9\xF9 => U2550 U2550 => \xF9\xF9
\xA2\xA4 => U2550
So it is round-trip safe for \xF9\xF9. But if the line above is upside down, here is what
happens.
E to U U to E
--------------------------------------
\xA2\xA4 => U2550 U2550 => \xF9\xF9
(\xF9\xF9 => U2550 is now overwritten!)
The Encode package comes with ucmlint, a crude but sufficient utility to check the
integrity of a UCM file. Check under the Encode/bin directory for this.
When in doubt, you can use ucmsort, yet another utility under Encode/bin directory.
Bookmarks
• ICU Home Page <http://www.icu-project.org/>
• ICU Character Mapping Tables <http://site.icu-project.org/charts/charset>
• ICU:Conversion Data <http://www.icu-project.org/userguide/conversion-data.html>
SEE ALSO
Encode, perlmod, perlpod
POD ERRORS
Hey! The above document had some coding errors, which are explained below:
Around line 1097:
Expected text after =item, not a number
Around line 1130:
Expected text after =item, not a number
Around line 1136:
Expected text after =item, not a number
Around line 1143:
Expected text after =item, not a number
Around line 1164:
Expected text after =item, not a number
Around line 1177:
Expected text after =item, not a number
Around line 1181:
Expected text after =item, not a number