NAME

       fs_setacl - Sets the ACL for a directory

SYNOPSIS

       fs setacl -dir <directory>+ -acl <access list entries>+
           [-clear] [-negative] [-id] [-if] [-help]

       fs sa -d <directory>+ -a <access list entries>+
           [-c] [-n] [-id] [-if] [-h]

       fs seta -d <directory>+ -a <access list entries>+
           [-c] [-n] [-id] [-if] [-h]

DESCRIPTION

       The fs setacl command adds the access control list (ACL) entries specified with the -acl
       argument to the ACL of each directory named by the -dir argument.

       If the -dir argument designates a pathname in DFS filespace (accessed via the AFS/DFS
       Migration Toolkit Protocol Translator), it can be a file as well as a directory. The ACL
       must already include an entry for "mask_obj", however.

       Only user and group entries are acceptable values for the -acl argument. Do not place
       machine entries (IP addresses) directly on an ACL; instead, make the machine entry a group
       member and place the group on the ACL.

       To completely erase the existing ACL before adding the new entries, provide the -clear
       flag. To add the specified entries to the "Negative rights" section of the ACL (deny
       rights to specified users or groups), provide the -negative flag.

       To display an ACL, use the fs listacl command. To copy an ACL from one directory to
       another, use the fs copyacl command.

CAUTIONS

       If the ACL already grants certain permissions to a user or group, the permissions
       specified with the fs setacl command replace the existing permissions, rather than being
       added to them.

       Setting negative permissions is generally unnecessary and not recommended. Simply omitting
       a user or group from the "Normal rights" section of the ACL is normally adequate to
       prevent access. In particular, note that it is futile to deny permissions that are granted
       to members of the system:anyuser group on the same ACL; the user needs only to issue the
       unlog command to receive the denied permissions.

       When including the -clear option, be sure to reinstate an entry for each directory's owner
       that includes at least the "l" (lookup) permission. Without that permission, it is
       impossible to resolve the "dot" (".") and "dot dot" ("..") shorthand from within the
       directory. (The directory's owner does implicitly have the "a" (administer) permission
       even on a cleared ACL, but must know to use it to add other permissions.)

OPTIONS

       -dir <directory>+
           Names each AFS directory, or DFS directory or file, for which the set the ACL. Partial
           pathnames are interpreted relative to the current working directory.

           Specify the read/write path to each directory (or DFS file), to avoid the failure that
           results from attempting to change a read-only volume. By convention, the read/write
           path is indicated by placing a period before the cell name at the pathname's second
           level (for example, /afs/.abc.com). For further discussion of the concept of
           read/write and read-only paths through the filespace, see the fs mkmount reference
           page.

       -acl <access list entries>+
           Defines a list of one or more ACL entries, each a pair that names:

           •   A user name or group name as listed in the Protection Database.

           •   One or more ACL permissions, indicated either by combining the individual letters
               or by one of the four acceptable shorthand words.

           in that order, separated by a space (thus every instance of this argument has two
           parts). The accepted AFS abbreviations and shorthand words, and the meaning of each,
           are as follows:

           a (administer)
               Change the entries on the ACL.

           d (delete)
               Remove files and subdirectories from the directory or move them to other
               directories.

           i (insert)
               Add files or subdirectories to the directory by copying, moving or creating.

           k (lock)
               Set read locks or write locks on the files in the directory.

           l (lookup)
               List the files and subdirectories in the directory, stat the directory itself, and
               issue the fs listacl command to examine the directory's ACL.

           r (read)
               Read the contents of files in the directory; issue the "ls -l" command to stat the
               elements in the directory.

           w (write)
               Modify the contents of files in the directory, and issue the UNIX chmod command to
               change their mode bits.

           A, B, C, D, E, F, G, H
               Have no default meaning to the AFS server processes, but are made available for
               applications to use in controlling access to the directory's contents in
               additional ways. The letters must be uppercase.

           all Equals all seven permissions ("rlidwka").

           none
               No permissions. Removes the user/group from the ACL, but does not guarantee they
               have no permissions if they belong to groups that remain on the ACL.

           read
               Equals the "r" (read) and "l" (lookup) permissions.

           write
               Equals all permissions except "a" (administer), that is, "rlidwk".

           It is acceptable to mix entries that combine the individual letters with entries that
           use the shorthand words, but not use both types of notation within an individual
           pairing of user or group and permissions.

           Granting the "l" (lookup) and "i" (insert) permissions without granting the "w"
           (write) and/or "r" (read) permissions is a special case, and grants rights
           approrpriate for "dropbox" directories. See the DROPBOXES section for details.

           If setting ACLs on a pathname in DFS filespace, see the DFS documentation for the
           proper format and acceptable values for DFS ACL entries.

       -clear
           Removes all existing entries on each ACL before adding the entries specified with the
           -acl argument.

       -negative
           Places the specified ACL entries in the "Negative rights" section of each ACL,
           explicitly denying the rights to the user or group, even if entries on the
           accompanying "Normal rights" section of the ACL grant them permissions.

           This argument is not supported for DFS files or directories, because DFS does not
           implement negative ACL permissions.

       -id Places the ACL entries on the Initial Container ACL of each DFS directory, which are
           the only file system objects for which this flag is supported.

       -if Places the ACL entries on the Initial Object ACL of each DFS directory, which are the
           only file system objects for which this flag is supported.

       -help
           Prints the online help for this command. All other valid options are ignored.

DROPBOXES

       If an accessing user has the "l" (read) and "i" (insert) permissions on a directory, but
       not the "w" (write) and/or "r" (read) permissions, the user is implicitly granted the
       ability to write and/or read any file they create in that directory, until they close the
       file. This is to allow "dropbox"-style directories to exist, where users can deposit
       files, but cannot modify them later nor can they modify or read any files deposited in the
       directory by other users.

       Note, however, that the dropbox functionality is not perfect. The fileserver does not have
       knowledge of when a file is opened or closed on the client, and so the fileserver always
       allows an accessing user to read or write to a file in a "dropbox" directory if they own
       the file.  While the client prevents the user from reading or modifying their deposited
       file later, this is not enforced on the fileserver, and so should not be relied on for
       security.

       Additionally, if "dropbox" permissions are granted to "system:anyuser", unauthenticated
       users may deposit files in the directory. If an unauthenticated user deposits a file in
       the directory, the new file will be owned by the unauthenticated user ID, and is thus
       potentially modifiable by anyone.

       In an effort to try and reduce accidentally publicizing private data, the fileserver may
       refuse read requests for "dropbox" files from unauthenticated users. As a result,
       depositing files as an unauthenticated user may arbitrarily fail if "system:anyuser" has
       been granted dropbox permissions. While this should be rare, it is not completely
       preventable, and so for this reason relying on unauthenticated users to be able to deposit
       files in a dropbox is NOT RECOMMENDED.

EXAMPLES

       The following example adds two entries to the "Normal rights" section of the current
       working directory's ACL: the first entry grants "r" (read) and "l" (lookup) permissions to
       the group pat:friends, while the other (using the "write" shorthand) gives all permissions
       except "a" (administer) to the user "smith".

          % fs setacl -dir . -acl pat:friends rl smith write

          % fs listacl -path .
          Access list for . is
          Normal rights:
             pat:friends rl
             smith rlidwk

       The following example includes the -clear flag, which removes the existing permissions (as
       displayed with the fs listacl command) from the current working directory's reports
       subdirectory and replaces them with a new set.

          % fs listacl -dir reports
          Access list for reports is
          Normal rights:
             system:authuser rl
             pat:friends rlid
             smith rlidwk
             pat rlidwka
          Negative rights:
             terry rl

          % fs setacl -clear -dir reports -acl pat all smith write system:anyuser rl

          % fs listacl -dir reports
          Access list for reports is
          Normal rights:
             system:anyuser rl
             smith rlidwk
             pat rlidwka

       The following example use the -dir and -acl switches because it sets the ACL for more than
       one directory (both the current working directory and its public subdirectory).

          % fs setacl -dir . public -acl pat:friends rli

          % fs listacl -path . public
          Access list for . is
          Normal rights:
             pat rlidwka
             pat:friends rli
          Access list for public is
          Normal rights:
             pat rlidwka
             pat:friends rli

PRIVILEGE REQUIRED

       The issuer must have the "a" (administer) permission on the directory's ACL, a member of
       the system:administrators group, or, as a special case, must be the UID owner of the top-
       level directory of the volume containing this directory.  The last provision allows the
       UID owner of a volume to repair accidental ACL errors without requiring intervention by a
       member of system:administrators.

       Earlier versions of OpenAFS also extended implicit administer permission to the owner of
       any directory.  In current versions of OpenAFS, only the owner of the top-level directory
       of the volume has this special permission.

SEE ALSO

       fs_copyacl(1), fs_listacl(1), fs_mkmount(1)

COPYRIGHT

       IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.

       This documentation is covered by the IBM Public License Version 1.0.  It was converted
       from HTML to POD by software written by Chas Williams and Russ Allbery, based on work by
       Alf Wachsmann and Elizabeth Cassell.