Provided by: hwloc_1.8-1ubuntu1.14.04.1_amd64 bug

NAME

       hwloc-info - Show some information about some objects or about a topology

SYNOPSIS

       hwloc-info [ options ]...  <object>...

       hwloc-info [ options ]...

       Note  that  hwloc(7)  provides  a  detailed  explanation  of the hwloc system and of valid
       <object> formats; it should be read before reading this man page.

OPTIONS

       -i <file>, --input <file>
              Read topology from XML file <file> (instead of  discovering  the  topology  on  the
              local  machine).   If  <file> is "-", the standard input is used.  XML support must
              have been compiled in to hwloc for this option to be usable.

       -i <directory>, --input <directory>
              Read topology from the chroot specified by <directory> (instead of discovering  the
              topology  on the local machine).  This option is generally only available on Linux.
              The chroot was usually created by gathering another machine  topology  with  hwloc-
              gather-topology.

       -i <specification>, --input <specification>
              Simulate  a  fake  hierarchy  (instead  of  discovering  the  topology on the local
              machine). If <specification> is "node:2 pu:3", the topology will contain  two  NUMA
              nodes with 3 processing units in each of them.  The <specification> string must end
              with a number of PUs.

       --if <format>, --input-format <format>
              Enforce the input in the given format, among xml, fsroot and synthetic.

       -v --verbose
              Include additional detail.

       -s --silent
              Reduce the amount of details  to  show.   A  single  summary  line  per  object  is
              displayed.

       --ancestors
              Display  information  about the object as well as about all its ancestors up to the
              root of the topology.

       --ancestor <type>
              Only display the object ancestors that match the given type.

       -n     When outputting object  information,  prefix  each  line  with  the  index  of  the
              considered  object  within  the  input.  For instance, if three cores were given in
              input, the output lines will be prefixed with "0: ", "1: " or "2: ".  If --ancestor
              is  also  used,  the  prefix will be "X.Y: " where X is the index of the considered
              object within the input, and Y is the  parent  index  (0  for  the  object  itself,
              increasing towards the root of the topology).

       --whole-system
              Do not consider administration limitations.

       --restrict <cpuset>
              Restrict the topology to the given cpuset.

       --restrict binding
              Restrict the topology to the current process binding.  This option requires the use
              of the actual current machine topology (or any other topology with --thissystem  or
              with HWLOC_THISSYSTEM set to 1 in the environment).

       --no-io
              Do  not  show  any  I/O  device or bridge.  By default, common devices (GPUs, NICs,
              block devices, ...) and interesting bridges are shown.

       --no-bridges
              Do not show any I/O bridge except hostbridges.  By default, common  devices  (GPUs,
              NICs, block devices, ...) and interesting bridges are shown.

       --whole-io
              Show  all  I/O  devices  and bridges.  By default, only common devices (GPUs, NICs,
              block devices, ...) and interesting bridges are shown.

       --thissystem
              Assume that the selected backend provides the topology for the system on  which  we
              are  running.   This  is  useful when using --restrict binding and loading a custom
              topology such as an XML file.

       --pid <pid>
              Detect topology as seen by  process  <pid>,  i.e.  as  if  process  <pid>  did  the
              discovery  itself.   Note  that  this  can  for  instance change the set of allowed
              processors.   Also  show  this  process  current  CPU  binding   by   marking   the
              corresponding  PUs (in Green in the graphical output, see the COLORS section below,
              or by appending (binding) to the verbose text output).  If 0 is given as  pid,  the
              current binding for the lstopo process will be shown.

       -p --physical
              Use OS/physical indexes instead of logical indexes for input.

       -l --logical
              Use logical indexes instead of physical/OS indexes for input (default).

       --version
              Report version and exit.

DESCRIPTION

       hwloc-info  displays  information  about  the specified object.  It is intended to be used
       with tools such as grep  for  filtering  certain  attribute  lines.   When  no  object  is
       specified, hwloc-info prints a summary of the topology.

       Objects  may  be  specified  as  location  tuples,  as  explained  in  hwloc(7).   However
       hexadecimal bitmasks are not accepted since they may correspond to multiple objects.

       NOTE: It is highly recommended that you read the hwloc(7)  overview  page  before  reading
       this  man  page.   Most of the concepts described in hwloc(7) directly apply to the hwloc-
       calc utility.

EXAMPLES

       To display information about each socket:

           $ hwloc-info socket:all
           Socket L#0
            logical index = 0
           ...

       To display information about the core whose physical index is 2:

           $ utils/hwloc-info -p core:2
           Core L#1
            logical index = 1
            os index = 2
          ...

SEE ALSO

       hwloc(7), lstopo(1), hwloc-calc(1), hwloc-bind(1), hwloc-ps(1), hwloc-gather-topology(1)