Provided by: krb5-user_1.12+dfsg-2ubuntu5.4_amd64 
NAME
kadmin - Kerberos V5 database administration program
SYNOPSIS
kadmin [-O|-N] [-r realm] [-p principal] [-q query] [[-c cache_name]|[-k [-t keytab]]|-n]
[-w password] [-s admin_server[:port]]
kadmin.local [-r realm] [-p principal] [-q query] [-d dbname] [-e enc:salt ...] [-m] [-x
db_args]
DESCRIPTION
kadmin and kadmin.local are command-line interfaces to the Kerberos V5 administration
system. They provide nearly identical functionalities; the difference is that
kadmin.local directly accesses the KDC database, while kadmin performs operations using
kadmind(8). Except as explicitly noted otherwise, this man page will use "kadmin" to
refer to both versions. kadmin provides for the maintenance of Kerberos principals,
password policies, and service key tables (keytabs).
The remote kadmin client uses Kerberos to authenticate to kadmind using the service
principal kadmin/ADMINHOST (where ADMINHOST is the fully-qualified hostname of the admin
server) or kadmin/admin. If the credentials cache contains a ticket for one of these
principals, and the -c credentials_cache option is specified, that ticket is used to
authenticate to kadmind. Otherwise, the -p and -k options are used to specify the client
Kerberos principal name used to authenticate. Once kadmin has determined the principal
name, it requests a service ticket from the KDC, and uses that service ticket to
authenticate to kadmind.
Since kadmin.local directly accesses the KDC database, it usually must be run directly on
the master KDC with sufficient permissions to read the KDC database. If the KDC database
uses the LDAP database module, kadmin.local can be run on any host which can access the
LDAP server.
OPTIONS
-r realm
Use realm as the default database realm.
-p principal
Use principal to authenticate. Otherwise, kadmin will append /admin to the primary
principal name of the default ccache, the value of the USER environment variable,
or the username as obtained with getpwuid, in order of preference.
-k Use a keytab to decrypt the KDC response instead of prompting for a password. In
this case, the default principal will be host/hostname. If there is no keytab
specified with the -t option, then the default keytab will be used.
-t keytab
Use keytab to decrypt the KDC response. This can only be used with the -k option.
-n Requests anonymous processing. Two types of anonymous principals are supported.
For fully anonymous Kerberos, configure PKINIT on the KDC and configure
pkinit_anchors in the client's krb5.conf(5). Then use the -n option with a
principal of the form @REALM (an empty principal name followed by the at-sign and a
realm name). If permitted by the KDC, an anonymous ticket will be returned. A
second form of anonymous tickets is supported; these realm-exposed tickets hide the
identity of the client but not the client's realm. For this mode, use kinit -n
with a normal principal name. If supported by the KDC, the principal (but not
realm) will be replaced by the anonymous principal. As of release 1.8, the MIT
Kerberos KDC only supports fully anonymous operation.
-c credentials_cache
Use credentials_cache as the credentials cache. The cache should contain a service
ticket for the kadmin/ADMINHOST (where ADMINHOST is the fully-qualified hostname of
the admin server) or kadmin/admin service; it can be acquired with the kinit(1)
program. If this option is not specified, kadmin requests a new service ticket
from the KDC, and stores it in its own temporary ccache.
-w password
Use password instead of prompting for one. Use this option with care, as it may
expose the password to other users on the system via the process list.
-q query
Perform the specified query and then exit. This can be useful for writing scripts.
-d dbname
Specifies the name of the KDC database. This option does not apply to the LDAP
database module.
-s admin_server[:port]
Specifies the admin server which kadmin should contact.
-m If using kadmin.local, prompt for the database master password instead of reading
it from a stash file.
-e enc:salt ...
Sets the keysalt list to be used for any new keys created. See Keysalt_lists in
kdc.conf(5) for a list of possible values.
-O Force use of old AUTH_GSSAPI authentication flavor.
-N Prevent fallback to AUTH_GSSAPI authentication flavor.
-x db_args
Specifies the database specific arguments. Options supported for the LDAP database
module are:
-x host=hostname
Specifies the LDAP server to connect to by a LDAP URI.
-x binddn=bind_dn
Specifies the DN of the object used by the administration server to bind to
the LDAP server. This object should have the read and write privileges on
the realm container, the principal container, and the subtree that is
referenced by the realm.
-x bindpwd=bind_password
Specifies the password for the above mentioned binddn. Using this option
may expose the password to other users on the system via the process list;
to avoid this, instead stash the password using the stashsrvpw command of
kdb5_ldap_util(8).
-x debug=level
sets the OpenLDAP client library debug level. level is an integer to be
interpreted by the library. Debugging messages are printed to standard
error. New in release 1.12.
COMMANDS
When using the remote client, available commands may be restricted according to the
privileges specified in the kadm5.acl(5) file on the admin server.
add_principal
add_principal [options] newprinc
Creates the principal newprinc, prompting twice for a password. If no password policy is
specified with the -policy option, and the policy named default is assigned to the
principal if it exists. However, creating a policy named default will not automatically
assign this policy to previously existing principals. This policy assignment can be
suppressed with the -clearpolicy option.
This command requires the add privilege.
Aliases: addprinc, ank
Options:
-expire expdate
(getdate string) The expiration date of the principal.
-pwexpire pwexpdate
(getdate string) The password expiration date.
-maxlife maxlife
(getdate string) The maximum ticket life for the principal.
-maxrenewlife maxrenewlife
(getdate string) The maximum renewable life of tickets for the principal.
-kvno kvno
The initial key version number.
-policy policy
The password policy used by this principal. If not specified, the policy default
is used if it exists (unless -clearpolicy is specified).
-clearpolicy
Prevents any policy from being assigned when -policy is not specified.
{-|+}allow_postdated
-allow_postdated prohibits this principal from obtaining postdated tickets.
+allow_postdated clears this flag.
{-|+}allow_forwardable
-allow_forwardable prohibits this principal from obtaining forwardable tickets.
+allow_forwardable clears this flag.
{-|+}allow_renewable
-allow_renewable prohibits this principal from obtaining renewable tickets.
+allow_renewable clears this flag.
{-|+}allow_proxiable
-allow_proxiable prohibits this principal from obtaining proxiable tickets.
+allow_proxiable clears this flag.
{-|+}allow_dup_skey
-allow_dup_skey disables user-to-user authentication for this principal by
prohibiting this principal from obtaining a session key for another user.
+allow_dup_skey clears this flag.
{-|+}requires_preauth
+requires_preauth requires this principal to preauthenticate before being allowed
to kinit. -requires_preauth clears this flag. When +requires_preauth is set on a
service principal, the KDC will only issue service tickets for that service
principal if the client's initial authentication was performed using
preauthentication.
{-|+}requires_hwauth
+requires_hwauth requires this principal to preauthenticate using a hardware device
before being allowed to kinit. -requires_hwauth clears this flag. When
+requires_hwauth is set on a service principal, the KDC will only issue service
tickets for that service principal if the client's initial authentication was
performed using a hardware device to preauthenticate.
{-|+}ok_as_delegate
+ok_as_delegate sets the okay as delegate flag on tickets issued with this
principal as the service. Clients may use this flag as a hint that credentials
should be delegated when authenticating to the service. -ok_as_delegate clears
this flag.
{-|+}allow_svr
-allow_svr prohibits the issuance of service tickets for this principal.
+allow_svr clears this flag.
{-|+}allow_tgs_req
-allow_tgs_req specifies that a Ticket-Granting Service (TGS) request for a service
ticket for this principal is not permitted. +allow_tgs_req clears this flag.
{-|+}allow_tix
-allow_tix forbids the issuance of any tickets for this principal. +allow_tix
clears this flag.
{-|+}needchange
+needchange forces a password change on the next initial authentication to this
principal. -needchange clears this flag.
{-|+}password_changing_service
+password_changing_service marks this principal as a password change service
principal.
{-|+}ok_to_auth_as_delegate
+ok_to_auth_as_delegate allows this principal to acquire forwardable tickets to
itself from arbitrary users, for use with constrained delegation.
{-|+}no_auth_data_required
+no_auth_data_required prevents PAC or AD-SIGNEDPATH data from being added to
service tickets for the principal.
-randkey
Sets the key of the principal to a random value.
-nokey Causes the principal to be created with no key. New in release 1.12.
-pw password
Sets the password of the principal to the specified string and does not prompt for
a password. Note: using this option in a shell script may expose the password to
other users on the system via the process list.
-e enc:salt,...
Uses the specified keysalt list for setting the keys of the principal. See
Keysalt_lists in kdc.conf(5) for a list of possible values.
-x db_princ_args
Indicates database-specific options. The options for the LDAP database module are:
-x dn=dn
Specifies the LDAP object that will contain the Kerberos principal being
created.
-x linkdn=dn
Specifies the LDAP object to which the newly created Kerberos principal
object will point.
-x containerdn=container_dn
Specifies the container object under which the Kerberos principal is to be
created.
-x tktpolicy=policy
Associates a ticket policy to the Kerberos principal.
Note
• The containerdn and linkdn options cannot be specified with the dn option.
• If the dn or containerdn options are not specified while adding the principal,
the principals are created under the principal container configured in the realm
or the realm container.
• dn and containerdn should be within the subtrees or principal container
configured in the realm.
Example:
kadmin: addprinc jennifer
WARNING: no policy specified for "jennifer@ATHENA.MIT.EDU";
defaulting to no policy.
Enter password for principal jennifer@ATHENA.MIT.EDU:
Re-enter password for principal jennifer@ATHENA.MIT.EDU:
Principal "jennifer@ATHENA.MIT.EDU" created.
kadmin:
modify_principal
modify_principal [options] principal
Modifies the specified principal, changing the fields as specified. The options to
add_principal also apply to this command, except for the -randkey, -pw, and -e options.
In addition, the option -clearpolicy will clear the current policy of a principal.
This command requires the modify privilege.
Alias: modprinc
Options (in addition to the addprinc options):
-unlock
Unlocks a locked principal (one which has received too many failed authentication
attempts without enough time between them according to its password policy) so that
it can successfully authenticate.
rename_principal
rename_principal [-force] old_principal new_principal
Renames the specified old_principal to new_principal. This command prompts for
confirmation, unless the -force option is given.
This command requires the add and delete privileges.
Alias: renprinc
delete_principal
delete_principal [-force] principal
Deletes the specified principal from the database. This command prompts for deletion,
unless the -force option is given.
This command requires the delete privilege.
Alias: delprinc
change_password
change_password [options] principal
Changes the password of principal. Prompts for a new password if neither -randkey or -pw
is specified.
This command requires the changepw privilege, or that the principal running the program is
the same as the principal being changed.
Alias: cpw
The following options are available:
-randkey
Sets the key of the principal to a random value.
-pw password
Set the password to the specified string. Using this option in a script may expose
the password to other users on the system via the process list.
-e enc:salt,...
Uses the specified keysalt list for setting the keys of the principal. See
Keysalt_lists in kdc.conf(5) for a list of possible values.
-keepold
Keeps the existing keys in the database. This flag is usually not necessary except
perhaps for krbtgt principals.
Example:
kadmin: cpw systest
Enter password for principal systest@BLEEP.COM:
Re-enter password for principal systest@BLEEP.COM:
Password for systest@BLEEP.COM changed.
kadmin:
purgekeys
purgekeys [-all|-keepkvno oldest_kvno_to_keep] principal
Purges previously retained old keys (e.g., from change_password -keepold) from principal.
If -keepkvno is specified, then only purges keys with kvnos lower than
oldest_kvno_to_keep. If -all is specified, then all keys are purged. The -all option is
new in release 1.12.
This command requires the modify privilege.
get_principal
get_principal [-terse] principal
Gets the attributes of principal. With the -terse option, outputs fields as quoted
tab-separated strings.
This command requires the inquire privilege, or that the principal running the the program
to be the same as the one being listed.
Alias: getprinc
Examples:
kadmin: getprinc tlyu/admin
Principal: tlyu/admin@BLEEP.COM
Expiration date: [never]
Last password change: Mon Aug 12 14:16:47 EDT 1996
Password expiration date: [none]
Maximum ticket life: 0 days 10:00:00
Maximum renewable life: 7 days 00:00:00
Last modified: Mon Aug 12 14:16:47 EDT 1996 (bjaspan/admin@BLEEP.COM)
Last successful authentication: [never]
Last failed authentication: [never]
Failed password attempts: 0
Number of keys: 2
Key: vno 1, DES cbc mode with CRC-32, no salt
Key: vno 1, DES cbc mode with CRC-32, Version 4
Attributes:
Policy: [none]
kadmin: getprinc -terse systest
systest@BLEEP.COM 3 86400 604800 1
785926535 753241234 785900000
tlyu/admin@BLEEP.COM 786100034 0 0
kadmin:
list_principals
list_principals [expression]
Retrieves all or some principal names. expression is a shell-style glob expression that
can contain the wild-card characters ?, *, and []. All principal names matching the
expression are printed. If no expression is provided, all principal names are printed.
If the expression does not contain an @ character, an @ character followed by the local
realm is appended to the expression.
This command requires the list privilege.
Alias: listprincs, get_principals, get_princs
Example:
kadmin: listprincs test*
test3@SECURE-TEST.OV.COM
test2@SECURE-TEST.OV.COM
test1@SECURE-TEST.OV.COM
testuser@SECURE-TEST.OV.COM
kadmin:
get_strings
get_strings principal
Displays string attributes on principal.
This command requires the inquire privilege.
Alias: getstr
set_string
set_string principal key value
Sets a string attribute on principal. String attributes are used to supply per-principal
configuration to the KDC and some KDC plugin modules. The following string attributes are
recognized by the KDC:
session_enctypes
Specifies the encryption types supported for session keys when the principal is
authenticated to as a server. See Encryption_types in kdc.conf(5) for a list of
the accepted values.
This command requires the modify privilege.
Alias: setstr
del_string
del_string principal key
Deletes a string attribute from principal.
This command requires the delete privilege.
Alias: delstr
add_policy
add_policy [options] policy
Adds a password policy named policy to the database.
This command requires the add privilege.
Alias: addpol
The following options are available:
-maxlife time
(getdate string) Sets the maximum lifetime of a password.
-minlife time
(getdate string) Sets the minimum lifetime of a password.
-minlength length
Sets the minimum length of a password.
-minclasses number
Sets the minimum number of character classes required in a password. The five
character classes are lower case, upper case, numbers, punctuation, and
whitespace/unprintable characters.
-history number
Sets the number of past keys kept for a principal. This option is not supported
with the LDAP KDC database module.
-maxfailure maxnumber
Sets the number of authentication failures before the principal is locked.
Authentication failures are only tracked for principals which require
preauthentication. The counter of failed attempts resets to 0 after a successful
attempt to authenticate. A maxnumber value of 0 (the default) disables lockout.
-failurecountinterval failuretime
(getdate string) Sets the allowable time between authentication failures. If an
authentication failure happens after failuretime has elapsed since the previous
failure, the number of authentication failures is reset to 1. A failuretime value
of 0 (the default) means forever.
-lockoutduration lockouttime
(getdate string) Sets the duration for which the principal is locked from
authenticating if too many authentication failures occur without the specified
failure count interval elapsing. A duration of 0 (the default) means the principal
remains locked out until it is administratively unlocked with modprinc -unlock.
-allowedkeysalts
Specifies the key/salt tuples supported for long-term keys when setting or changing
a principal's password/keys. See Keysalt_lists in kdc.conf(5) for a list of the
accepted values, but note that key/salt tuples must be separated with commas (',')
only. To clear the allowed key/salt policy use a value of '-'.
Example:
kadmin: add_policy -maxlife "2 days" -minlength 5 guests
kadmin:
modify_policy
modify_policy [options] policy
Modifies the password policy named policy. Options are as described for add_policy.
This command requires the modify privilege.
Alias: modpol
delete_policy
delete_policy [-force] policy
Deletes the password policy named policy. Prompts for confirmation before deletion. The
command will fail if the policy is in use by any principals.
This command requires the delete privilege.
Alias: delpol
Example:
kadmin: del_policy guests
Are you sure you want to delete the policy "guests"?
(yes/no): yes
kadmin:
get_policy
get_policy [ -terse ] policy
Displays the values of the password policy named policy. With the -terse flag, outputs
the fields as quoted strings separated by tabs.
This command requires the inquire privilege.
Alias: getpol
Examples:
kadmin: get_policy admin
Policy: admin
Maximum password life: 180 days 00:00:00
Minimum password life: 00:00:00
Minimum password length: 6
Minimum number of password character classes: 2
Number of old keys kept: 5
Reference count: 17
kadmin: get_policy -terse admin
admin 15552000 0 6 2 5 17
kadmin:
The "Reference count" is the number of principals using that policy. With the LDAP KDC
database module, the reference count field is not meaningful.
list_policies
list_policies [expression]
Retrieves all or some policy names. expression is a shell-style glob expression that can
contain the wild-card characters ?, *, and []. All policy names matching the expression
are printed. If no expression is provided, all existing policy names are printed.
This command requires the list privilege.
Aliases: listpols, get_policies, getpols.
Examples:
kadmin: listpols
test-pol
dict-only
once-a-min
test-pol-nopw
kadmin: listpols t*
test-pol
test-pol-nopw
kadmin:
ktadd
ktadd [options] principal
ktadd [options] -glob princ-exp
Adds a principal, or all principals matching princ-exp, to a keytab file. Each
principal's keys are randomized in the process. The rules for princ-exp are described in
the list_principals command.
This command requires the inquire and changepw privileges. With the -glob form, it also
requires the list privilege.
The options are:
-k[eytab] keytab
Use keytab as the keytab file. Otherwise, the default keytab is used.
-e enc:salt,...
Uses the specified keysalt list for setting the new keys of the principal. See
Keysalt_lists in kdc.conf(5) for a list of possible values.
-q Display less verbose information.
-norandkey
Do not randomize the keys. The keys and their version numbers stay unchanged. This
option is only available in kadmin.local, and cannot be specified in combination
with the -e option.
An entry for each of the principal's unique encryption types is added, ignoring multiple
keys with the same encryption type but different salt types.
Example:
kadmin: ktadd -k /tmp/foo-new-keytab host/foo.mit.edu
Entry for principal host/foo.mit.edu@ATHENA.MIT.EDU with kvno 3,
encryption type aes256-cts-hmac-sha1-96 added to keytab
FILE:/tmp/foo-new-keytab
kadmin:
ktremove
ktremove [options] principal [kvno | all | old]
Removes entries for the specified principal from a keytab. Requires no permissions, since
this does not require database access.
If the string "all" is specified, all entries for that principal are removed; if the
string "old" is specified, all entries for that principal except those with the highest
kvno are removed. Otherwise, the value specified is parsed as an integer, and all entries
whose kvno match that integer are removed.
The options are:
-k[eytab] keytab
Use keytab as the keytab file. Otherwise, the default keytab is used.
-q Display less verbose information.
Example:
kadmin: ktremove kadmin/admin all
Entry for principal kadmin/admin with kvno 3 removed from keytab
FILE:/etc/krb5.keytab
kadmin:
lock
Lock database exclusively. Use with extreme caution! This command only works with the
DB2 KDC database module.
unlock
Release the exclusive database lock.
list_requests
Lists available for kadmin requests.
Aliases: lr, ?
quit
Exit program. If the database was locked, the lock is released.
Aliases: exit, q
HISTORY
The kadmin program was originally written by Tom Yu at MIT, as an interface to the
OpenVision Kerberos administration program.
SEE ALSO
kpasswd(1), kadmind(8)
AUTHOR
MIT
COPYRIGHT
1985-2013, MIT