Provided by: kdrill_6.5deb2-9_amd64 
NAME
kdrill - drill program for kanji chars under Xwindows (X11R5 or better is required to run) kdrill also
does dictionary lookup
Yikes.. this man-page is getting huge. But I am a great believer in having proper documentation.
Hopefully, this new format will help instead of hinder.
At some future point in time, I shall convert this huge beast to HTML. But that point is not now.
[Although actually, you CAN go to http://www.bolthole.com/kdrill/ for
some help ]
TIP: "/WORD" usually takes you to the next occurrence of "WORD", if you are viewing this using a
"man"-like program.
SECTIONS (of this man page)
RUNTIME OPTIONS
RESOURCES
DESCRIPTION
PLAYING
PLAYING OPTIONS
LEARNING NEW CHARS
USEFILES
SEARCH
KEYBOARD ACCELERATORS
CONFIGURATION DETAILS
LOGFILES AND MISSED KANJI
KANJIDIC and EDICT
RUNTIME OPTIONS
[Note: most of these options are now somewhat redundant. Kdrill now auto-saves
its options. But just in case you want to know about these commandline
options...]
-usefile NewUsefileName
Change name of usefile, which lets you drill on specific characters.
-nousefile
Still read in usefile if it exists, but ignore it at startup.
-kdictfile OtherKanjidicFile
Use a different dictionary file name. You may have "hira.dic" or "kata.dic" installed, as well as
"kanjidic", for example.
-edictfile OtherKanjidicFile
Use a different edict-style-dictionary file name. "none" for no edict.
-englishfont FontName
Changes only english display of english-guess buttons.
-kanjifont KanjiFontName
Change large kanji font.
-smallkanji KanjiFontName
Change small kanji/kana font for kana-guess buttons.
-noBell
Turns off beep on wrong answer.
-guessmode
say whether you want the guess choices to be in "english", "kanji", or "kana"
-questionmode
say whether you want the 'question' to be in "english", "kanji", or "kana"
-showinorder
Start in ordered mode. Go through desired kanji in order of #.
-gradelevel <level #s>
Start with different grade levels enabled. A string with one or more of [123456+]
-showkana
Start with kana meanings instead of english.
-lowfrequency #, -highfrequency #
Set lowest and/or highest frequency kanji you want to see.
-logfile filename
Change filename to log current errors to (with "Log" button)
-notallT
Don't insist that all dictionary entries have kana AND English. WARNING! Normal operation is to
ignore incomplete entries, and thereby enable switching from kana to english without changing the
quiz kanji. Using this option will make kdrill move to another kanji if you switch kana to English
or vica versa.
[ default behaviour currently loses 300 kanji, with the kanjidic file I have currently. All
characters with Frequency ratings have full translations. ]
RESOURCES
Kdrill now saves config options in $HOME/.kdrill, in X-resource format. The latest configuration will
automatically be saved when you quit kdrill normally. If you want to change kdrill's settings, and you
dont see a way to do it in the options popup, you can probably change it in the global "KDrill" resource
file, or in your personal "$HOME/.kdrill" file. See the sample "KDrill" file for more detail, which is
often installed in /usr/lib/X11/app-defaults/KDrill, or someplace similar. Values in $HOME/.kdrill will
override the global settings.
Colors
You may change the background of the windows using a resource file, as mentioned above.
DESCRIPTION
kdrill is a program to drill users on meanings of kanji characters. Various formats of drills are
available:
kanji --\ /--- kanji
kana --*-- kana
english --/ \-- english
PLAYING
kdrill will present you with a kanji (or kana or english phrase) and five possible meanings for it. Your
goal is to guess which one matches the kanji at the top. Initially, it will choose randomly from the
entire dictionary, so you will probably want to narrow the range, via the OPTIONS section, below.
Any grade level or frequency rating the current kanji has will be displayed in the top right hand side of
the window, next to the "G:" and "F:" letters. The kanji index number will be displayed after the "#:"
sign.
Click with your primary mouse button (usually the left one) on one of the multiple-choice answered to see
how well you know the lone kanji or meaning. You may also use the number keys to make your choice.
[1,2,3,4,5]
If you guess correctly, you will move on to another character. If you guess incorrectly, you will have to
guess again. Furthermore, kdrill will make a note that you didn't know either the character displayed, or
the character for the incorrect meaning you clicked on.
If you are playing in random order, kdrill will randomly repeat the ones you have missed. You will have
to get a missed character right twice for kdrill to think you know it. If you miss a character more than
once, you will have to repeat the character two times the number of times you missed it. If you are
playing in order, kdrill will keep to the order, and not go back. It will still remember ones you have
missed, however, and will go back to them if you later switch to random order.
There are two ways of "cheating", if you are learning new characters, and don't want to have an incorrect
guess recorded. One way is to press the "cheat" button, and the correct answer will be highlighted. The
other way is to make a guess with button 2 on your mouse. The character of the one you clicked on will
appear in the search window. If the search window was not already open, it will appear when you do this.
PLAYING OPTIONS
If you want to change the way the game works while playing, you can bring up the options window by
pressing the options button. If you know how you want the game to play before starting it, you can most
likely do what you want with a command-line option, described at the top of this man-page. If you want to
permanently change an option, see the "RESOURCES" header, above.
The following options are to help narrow down the range of kanji you get quizzed on.
Grades
You may specify which grade levels you wish to study, by clicking on the buttons labeled: "1",
"2", "3", "4", "5", "6", "+", or "All", in the "Grade Select" window. You may also select/unselect
a grade by holding down shift, followed by "1", "2", "3", "4", "5", "6", "+", or "a", in the main
window.
The "All" feature will select all grades. but it will not unselect them.
The default is to have all the grades enabled.
Frequency
Some kanji have frequency ratings. That means that, in real life, some kanji are used more
frequently than others. Frequency rating 1 means that this is the most frequently used character.
The frequency of the true answer you are guessing will be displayed in the top right of the main
window, next to the "F:" sign, if a frequency rating exists.
The frequency range area in the options window allows you to limit the kanji you see based on
their frequency rating. The frequency range area consists of two smaller input areas; "High", and
"Low". High means a kanji that is high frequency. That is to say, something that is used often.
According to the definitions of the dictionary, "1" means the kanji that is used the most often. A
frequency rating of "2" means that the character has a lower frequency than "1". The most
frequently used kanji is the character for "day", which is "F: 1".
Setting a number in the "High" window limits high frequency kanji. If there is a number in the
"High" window, that means that you will see no kanji that is of higher frequency than that number.
Similarly, setting a number in the "Low" window means that you will see no kanji of frequency
lower than that number. 2000 is a "Low" frequency kanji. If you put 2000 in the "Low" area, you
would see nothing of lower frequency than the character rated at 2000 (which happens to be "hazy")
that you would see nothing
A blank in the "High" or "Low" fields indicates no limit in the field. If you try to set either
window to "0", it will automatically set itself blank for you.
Order
It is possible to be drilled on kanji in order, without repetition, until "all" kanji have been
covered. Any restrictions on grade level or frequency will still apply. To enable or disable
ordering, click on the "Showing randomly" (or "Showing in order") button in the options window.
Note that "in order" does not mean in order of frequency. It means in the order represented by the
dictionary, denoted by the '#' number shown at top right. This happens to be the JIS-encoding of
the Kanji, which we also call the kanji index.
TIP: A good way to start learning a range of chars, is to select the
"in order" option, and a particular grade level and/or frequency range. Press 'C' (Shift-c) for
super-cheat. This will both highlight the correct answer, AND show the full kanji+kana+english
meanings in the popup search window!
When you have looked at it enough, click on the correct answer to move on to the next kanji.
Or rather than use the super-cheat option repeatedly... Read the next section.
LEARNING NEW CHARS
If you would like a small little window to memorize new chars in, instead of the bulkier 'main' or
'search' windows, there is now a 'learn' window. Pressing the (learn) button on the main window will
bring up the learn window, which only displays kanji, kana, and english meanings of a char. Pressing one
of the 'next' buttons will select a new char for you to look at, using the same rules of choosing that
the main window uses. (grade levels, and an optional usefile)
USEFILES
A usefile is a way to tell kdrill "I want to be quizzed on these kanji, and ONLY these specific kanji".
Generally speaking, it is easier to just pick a particular grade level or frequency range to quiz
yourself on. But if you know you want specific kanji (for example, to study for a class!) having a
usefile is very useful.
Grade and Frequency restrictions will apply, even if you have a usefile. Thus, if all your usefile-
defined kanji are of grade 4 or higher, and you have only selected grades 3 and lower, kdrill will
complain that there are not enough kanji available, and attempt to add viewable grade levels until there
are enough value kanji to quiz on
To add or remove a kanji from the "usefile", pull up the search window, and view a particular kanji. The
"usefile" button at the far right will be highlighted if it is in the usefile list. You can toggle the
button to set the status as you wish.
If you want to see all the kanji in your usefile, click on the "show" button, below the "usefile" toggle,
in the search window. It will then show you the current list, and pressing on one will display it in the
search window. You can then remove it via the "usefile" toggle if you like.
When you quit kdrill, it will update the usefile, IF you have a minimum number in the list (currently,
10). If you want to know if you have enough, use the options window to toggle "No Usefile" to "Using
Usefile". It will not let you, if there are not enough characters in the list.
If you wish kdrill to ignore your usefile when you start it up, you may use the -nousefile option.
Usefile format
If you want to edit a usefile by hand, this is the format:
A usefile consists of a list of hex numbers; one per line, no initial spaces allowed. A usefile
lets the program know you are interested in certain kanji, from the thousands listed in the
dictionary. It is possible to add comment lines by having the very first character of a line be
"#". However, those will be overwritten if you make changes from within the program. Hex numbers
can be checked or found by using the "xfd" util on the "kanji24" font. Alternatively, you could
use the search window or main kdrill window. In on of the "#" input boxes, type in "0x", and then
the hex number. It is best to do this in the search window, since the main window may have range
restrictions on it.
SEARCH
It is now possible to search for a character in kdrill. You may search for an English phrase, a kana
phrase, or a particular kanji.
kdrill will automatically show the first match. If there is more than one match, it will be shown in a
secondary popup window. That window can be changed to display the english, kanji, or kana meaning of
each dictionary entry. Click on one to have it displayed in the main search window.
Additionally, if a search turns up a kanji phrase instead of a single kanji, you may click on the phrase
at the top of the search window, to have the secondary multi-listing window display the individual kanji
for you to examine in further detail.
English search
First, bring up the search window by pressing the search button. Then, enter an English word (or
fragment) in the bottom-most section of the window, and press return or enter. The window will
then display the first kanji it finds that has that word in its definition, along with its index
number, grade, and other information available, if any.
Kana search
If you want to search for a kana phrase, you now have TWO options!
For more experienced users, you can finally type in that tempting kana window. There is no little
^ cursor, but dont worry about that. DO worry about the following conventions:
Type "n " (n,space) to convert a ending 'n' to kana
Press "'" for small-tsu. (type "chotto" as "cho'to")
Press "-" for kana elongation. ("bi-ru")
Press backspace to erase the last char.
Press return to start the search.
For a pointy-clicky method of input, press the "kana search" button. This will pop up the kana
seach window. (Press it again to remove the window.) Press the kana(s) you want to search for.
The chars you press will be shown next to the "kana search" button in the main search window. When
you have the phrase ready, press the [Search] box.
If your kana recognition isn't all it should be, you can toggle romaji mode in the options popup
(via "options" from the main window). Additionally, if you don't know katakana, but want to
translate a katakana phrase, use the <=> button to toggle between hiragana and katakana. Note
that even if you are in katakana input mode, it will print out your buttonpresses as hiragana.
This is because the search engine treats hiragana and katakana identically.
If you make a mistake, press the <- button, or backspace, to erase the last char.
The characters you press will appear at the bottom of the popup, and also on the main search
window next to the kana search button. As noted above, if you make a mistake typing, use the <-
button on the kana window to erase, or the backspace key.
KANJI SEARCH
You now have a multiple ways to look up Kanji.
4-corner Kanji search
If you want to find a kanji by shape, press the kanji search button on the search window. This
will bring up the kanji search window. Press it again to remove the kanji search window.
This window employes the "4-corner method" of lookup. The 4-corner method has lots of strange
rules to it. I strongly recommend that you read the description that comes in the kanjidic
document file. It is impossible for me to cover all details here.
In brief, you have to press each corner of the center box, and select one of the ten elements from
the top row, that best matches that corner of the kanji you want to look up. For those already
familiar with the 4-corner method, the "blank" element is an alias for the first element. There
are still only 10 possible positions.
Press the paragraph button (backwards 'P') when you are ready to search.
For those NOT already familiar with the 4-corner method... unfortunately, it sounds easy, but it
is really horribly difficult, and I again refer you to the documentation that comes with the
kanjidic dictionary file. Look for "kanjidic.doc"
SKIP Kanji search
Pressing the "Kanji SKIP search" button, will bring up the SKIP window. This window has
directions on it already. Follow the directions to define what the kanji looks like.
Kanji cut-n-paste lookup
For ELECTRONIC lookup... if you view Japanese text online with a program like "kterm", you can now
select a single kanji in kterm, and paste it into a special "drop target" in the search window. It
is to the far right of the "kanji" search button.
If you highlight multiple characters, kdrill will now only look for an exact match of all
characters you paste in. (up to 4 chars). Multi-char matching will NOT WORK, unless you have
downloaded the additional dictionary, "edict"
Note: There is a BUG in some versions of netscape 4.x. If you are viewing kanji in a frame, you
can seemingly highlight a character, but it will not cut-n-paste to kdrill, or anywhere else. If
this occurs, use right-click to "open frame in new window", where you will be able to use cut-n-
paste. Cut-n-paste from netscape was also improved in version 5.9.6
MATCH SIMILAR KANJI
If you have a kanji already showing in the search window, and you are using the 'edict'
dictionary, you can search the large dictionary for occurences of the current kanji. Press the
"match" button next to the kanji display.
What are all those letters?
The top row; "G, F, #", all refer to the basic indexes that are shown in the mail kdrill window.
They stand for "Grade, Frequency, and Index #", respectively.
H denotes the index in the "Halperin" dictionary
N denotes the index in the "Nelson" dictionary
Ux denotes the "Unicode" of the kanji. It is Ux to make it stand out as the only one that expects
input in Hexadecimal. This is because that is the way the dictionary has it.
For all windows with the little ^ in them, you can change the values. When you press return or
enter in them, kdrill will attempt to find a match for what you just entered. If it can find no
match, it will blank out all fields displayed.
You can use this jump-to-index feature in the main window too. However, the main window will keep
any restrictions you might have while doing the search (limits by usefile, grade, or frequency
limit).
The search window ignores any restrictions on the main window, and searches the entire on-line
dictionary.
KEYBOARD ACCELERATORS
Almost everything has a keyboard shortcut in kdrill.
Key Action
1,2,3,4,5 Make a guess
Shift+(123456+) Change grade levels used
c (C)heat
C Super(C)heat
e Guess (e)nglish definision
k Guess which (k)anji fits
m Guess which kana (m)eaning fits
E Quiz on (E)nglish
K Quiz on (K)anji
M Quiz on kana (M)eaning
l popup (l)earn window
n (n)ext char, IF in learn window
o Toggle in-(o)rder drill
O Bring up (O)ptions window
p Go back to (p)revious
Control+q (Q)uit kdrill
u Toggle (u)sefile usage.
s (S)earch for a Kanji
T Timer start/stop
x clear missed count
Additionally, the Sun keyboard "Find" (F19) and "Props" (F13) keys are bound to the search and options
windows, respectively.
CONFIGURATION DETAILS
kdrill checks for a file by the name of .kanjiusefile in the current directory, although this name can be
changed either with the '-usefile' option, or in a resource file.
kdrill also checks for a logfile, named kdrill.log by default, in the current directory. This can be
changed with the -logfile option, or in a resource file. See "LOGFILES AND MISSED KANJI", below.
kdrill uses a file called "kanjidic" (which does not come in the source package) to interpret many of the
various 16-bit kanji chars in the kanji24 font supplied with the X11R5 distribution. This file should be
in a place accessible to all users. Normally it would be in /usr/local/lib or somewhere similar.
kanjidic subdivides its entries into grade levels, and frequency ratings. Grade levels are similar to
school grade levels, but more compressed. For kdrill's purposes, grade levels start at 1, and increase to
6. There are many kanji that do not have a grade level, due to their infrequency of use, or other
reasons. These are denoted by the "+" character in the grade select window.
The user can restrict the range of kanji to drill on in different, yet compatible, ways. The first way is
to make a ".kanjiusefile" with a an explicit list of desired kanji. (described above in "USEFILES"),
Changes you make to the "Grade Select" window or the "Frequency Range" section will not do anything until
you supply the correct match to the current drill-question (or press the english/kana toggle button).
Keep in mind that the xfd font tool and other applications may refer to kanji characters by a hexadecimal
number. You may enter a hexadecimal number by starting it with "0x". For example, "0x315c". To maintain
compatibility with the dictionary, the kdrill "usefile" expects hexadecimal input, not decimal input.
Similarly, the logfile also stores kanji in hexadecimal format. This makes it easy to use a log file of
kanji you have missed as a usefile, for repeated drilling.
LOGFILES AND MISSED KANJI
Every time you guess incorrectly, kdrill makes a note. It later will give you extra practice on ones you
missed, if you are playing in random order. It will only repeat a missed character about 25% of the
time. The more you miss a particular character, the more kdrill will repeat showing it to you.
You can store a list of your incorrect answers by pressing the "Log" button. kdrill will then write out
all the kanji characters it thinks you do not know into the logfile. This will erase any information
previously in that logfile. kdrill will also automatically update the logfile when it quits The next time
you start up kdrill, it will automatically read in the logfile, if it exists.
The logfile is named "kdrill.log", by default. You may change the name of the logfile with the -logfile
option.
It is a good idea to press "Log" just before quitting kdrill. That way, it will remember which
characters you are weak on, for the next time you play. It will then go back to those characters from
time to time, if you play in "random" order. If you do not press "Log", kdrill will not save a record of
what you have missed.
Alternatively, you can use the logfile as a usefile. kdrill will then only quiz you on those kanji you
missed. If you choose to do this, it is a good idea to copy the log file over to a different file. That
way, you can make a logfile for your new usefile. For example, in UNIX;
cp kdrill.log kdrill.usefile kdrill -usefile kdrill.usefile
The total number of missed entries is shown in the main window. If there are just too many for your
comfort (learning new kanji can be difficult!) you can ERASE THE COUNT with your backspace or delete
key.
KANJIDIC and EDICT
The dictionary for kdrill, kanjidic, is currently available where it originated, via ftp from
ftp.monash.edu.au, or from a mirror in the U.S. at ftp.uwtc.washington.edu. Likewise for the "edict"
dictionary. There are many other mirror sites mentioned on the kdrill web page. (See below)
At the monash site, both the dictionary and this program can currently be found in /pub/nihongo
This program's primary ftp site is now ftp.bolthole.com.
There is also an official kdrill URL;
http://www.bolthole.com/kdrill/
This currently shows you some screen-shots, and mentions the ftp sites.
BUGS
"kanjidic" isn't perfect. There are "incomplete" entries, missing either English or kana translations.
There are also entries consisting of "See Nxxxx", which isn't really an improvement. Note that you can
now use the search window to follow those "See Nxxxx" references! [ Just search for that Nxxx, as if
doing a search for English ]
Likewise, this man page may be incomplete!
AUTHOR
Philip P. Brown
(Who has finally taken a format Japanese lesson! Which helped a lot,
but am now back on the slow "self-taught" track. sigh! shikatta ga nai)
COPYRIGHT
This program was originally created while I was a student at the University of California. However, this
program was developed entirely by myself, on my own computer, not related to any classwork. I retain sole
right to this program.
I, Philip Brown, hereby give permission to use, and/or modify this code, so long as it it not sold for
profit, and I am given credit somewhere in the code. Unrelated works originally derived from this code
are not covered by this restriction (although it would be nice to mention me!)
NOTICE
Send donations, postcards, muffins, letters of commendation, to
Philip Brown
5353 Josie Ave
Lakewood, CA 90713
USA
[ I HAVE received some nice email, and more is always welcome. No postcards,
though. Sniff... Although I DID actually receive a small donation.
Yaaay! I can buy more manga now! :-> ]
Bug reports always "welcome". However, please ensure that you can reproduce it, so I can fix it for you.
Also, be sure to let me know your machine type, and version of kdrill you are using.
Philip Brown
phil@bolthole.com
http://www.bolthole.com/
http://www.bolthole.com/kdrill/
SEE ALSO:
ftp://ftp.bolthole.com/kdrill/zidian.README for information on how to use kdrill for Chinese learning