Provided by: mia-tools_2.0.13-1_amd64 
NAME
mia-2dmyoica-nonrigid-parallel - Run a registration of a series of 2D images.
SYNOPSIS
mia-2dmyoica-nonrigid-parallel -i <in-file> -o <out-file> [options]
DESCRIPTION
mia-2dmyoica-nonrigid-parallel This program implements the 2D version of the motion compensation
algorithm described in Wollny G, Kellman P, Santos A, Ledesma-Carbayo M-J, "Automatic Motion Compensation
of Free Breathing acquired Myocardial Perfusion Data by using Independent Component Analysis", Medical
Image Analysis, 2012, DOI:10.1016/j.media.2012.02.004.This version of the program may run all
registrations in parallel.
OPTIONS
File-IO
-i --in-file=(required)
input perfusion data set
-o --out-file=(required)
output perfusion data set
-r --registered=reg
File name base for the registered images. Image type and numbering scheme are taken from
the input images as given in the input data set.
--save-cropped=
save cropped set to this file, the image files will use the stem of the name as file name
base
--save-feature=
save segmentation feature images and initial ICA mixing matrix
--save-refs=
for each registration pass save the reference images to files with the given name base
--save-regs=
for each registration pass save intermediate registered images
Help & Info
-V --verbose=warning
verbosity of output, print messages of given level and higher priorities. Supported
priorities starting at lowest level are:
info ‐ Low level messages
warning ‐ Warnings
error ‐ Report errors
fail ‐ Report test failures
message ‐ Normal messages
fatal ‐ Report only fatal errors
--copyright
print copyright information
-h --help
print this help
-? --usage
print a short help
--version
print the version number and exit
ICA
-C --components=0
ICA components 0 = automatic estimation
--normalize
normalized ICs
--no-meanstrip
don't strip the mean from the mixing curves
-s --segscale=0
segment and scale the crop box around the LV (0=no segmentation)
-k --skip=0
skip images at the beginning of the series e.g. because as they are of other modalities
-m --max-ica-iter=400
maximum number of iterations in ICA
-E --segmethod=features
Segmentation method
delta-peak ‐ difference of the peak enhancement images
features ‐ feature images
delta-feature ‐ difference of the feature images
Processing
--threads=-1
Maxiumum number of threads to use for processing,This number should be lower or equal to
the number of logical processor cores in the machine. (-1: automatic estimation).
Registration
-O --optimizer=gsl:opt=gd,step=0.1
Optimizer used for minimization. The string value will be used to construct a plug-in. For
supported plugins see PLUGINS:minimizer/singlecost
-a --start-c-rate=16
start coefficinet rate in spines, gets divided by --c-rate-divider with every pass.
--c-rate-divider=2
Cofficient rate divider for each pass.
-d --start-divcurl=10000
Start divcurl weight, gets divided by --divcurl-divider with every pass.
--divcurl-divider=2
Divcurl weight scaling with each new pass.
-w --imagecost=image:weight=1,cost=ssd
image cost, do not specify the src and ref parameters, these will be set by the program.
The string value will be used to construct a plug-in. For supported plugins see
PLUGINS:2dimage/fullcost
-l --mg-levels=3
multi-resolution levels
-P --passes=3
registration passes
PLUGINS: 1d/splinekernel
bspline B-spline kernel creation , supported parameters are:
d = 3 (int)
Spline degree. in [0, 5]
omoms OMoms-spline kernel creation, supported parameters are:
d = 3 (int)
Spline degree. in [3, 3]
PLUGINS: 2dimage/cost
lsd Least-Squares Distance measure
(no parameters)
mi Spline parzen based mutual information., supported parameters are:
cut = 0 (float)
Percentage of pixels to cut at high and low intensities to remove outliers. in [0, 40]
mbins = 64 (uint)
Number of histogram bins used for the moving image. in [1, 256]
mkernel = [bspline:d=3] (factory)
Spline kernel for moving image parzen hinstogram. For supported plug-ins see
PLUGINS:1d/splinekernel
rbins = 64 (uint)
Number of histogram bins used for the reference image. in [1, 256]
rkernel = [bspline:d=0] (factory)
Spline kernel for reference image parzen hinstogram. For supported plug-ins see
PLUGINS:1d/splinekernel
ngf This function evaluates the image similarity based on normalized gradient fields. Various
evaluation kernels are availabe., supported parameters are:
eval = ds (string)
plugin subtype (sq, ds,dot,cross).
ssd 2D imaga cost: sum of squared differences, supported parameters are:
norm = 0 (bool)
Set whether the metric should be normalized by the number of image pixels.
PLUGINS: 2dimage/fullcost
divcurl divcurl penalty cost function, supported parameters are:
curl = 1 (float)
penalty weight on curl. in [0, 3.40282e+38]
div = 1 (float)
penalty weight on divergence. in [0, 3.40282e+38]
weight = 1 (float)
weight of cost function. in [-1e+10, 1e+10]
image Generalized image similarity cost function that also handles multi-resolution processing. The
actual similarity measure is given es extra parameter., supported parameters are:
cost = ssd (factory)
Cost function kernel. For supported plug-ins see PLUGINS:2dimage/cost
debug = 0 (bool)
Save intermediate resuts for debugging.
ref = ref.@ (io)
Reference image. For supported file types see PLUGINS:2dimage/io
src = src.@ (io)
Study image. For supported file types see PLUGINS:2dimage/io
weight = 1 (float)
weight of cost function. in [-1e+10, 1e+10]
PLUGINS: 2dimage/io
bmp BMP 2D-image input/output support
Recognized file extensions: .BMP, .bmp
Supported element types:
binary data, unsigned 8 bit, unsigned 16 bit
datapool Virtual IO to and from the internal data pool
Recognized file extensions: .@
dicom 2D image io for DICOM
Recognized file extensions: .DCM, .dcm
Supported element types:
unsigned 16 bit
exr a 2dimage io plugin for OpenEXR images
Recognized file extensions: .EXR, .exr
Supported element types:
unsigned 32 bit, floating point 32 bit
jpg a 2dimage io plugin for jpeg gray scale images
Recognized file extensions: .JPEG, .JPG, .jpeg, .jpg
Supported element types:
unsigned 8 bit
png a 2dimage io plugin for png images
Recognized file extensions: .PNG, .png
Supported element types:
binary data, unsigned 8 bit, unsigned 16 bit
raw RAW 2D-image output support
Recognized file extensions: .RAW, .raw
Supported element types:
binary data, signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit,
unsigned 32 bit, floating point 32 bit, floating point 64 bit
tif TIFF 2D-image input/output support
Recognized file extensions: .TIF, .TIFF, .tif, .tiff
Supported element types:
binary data, unsigned 8 bit, unsigned 16 bit, unsigned 32 bit
vista a 2dimage io plugin for vista images
Recognized file extensions: .V, .VISTA, .v, .vista
Supported element types:
binary data, signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit,
unsigned 32 bit, floating point 32 bit, floating point 64 bit
PLUGINS: minimizer/singlecost
gdsq Gradient descent with quadratic step estimation, supported parameters are:
ftolr = 0 (double)
Stop if the relative change of the criterion is below.. in [0, INF]
gtola = 0 (double)
Stop if the inf-norm of the gradient is below this value.. in [0, INF]
maxiter = 100 (uint)
Stopping criterion: the maximum number of iterations. in [1, 2147483647]
scale = 2 (double)
Fallback fixed step size scaling. in [1, INF]
step = 0.1 (double)
Initial step size. in [0, INF]
xtola = 0 (double)
Stop if the inf-norm of x-update is below this value.. in [0, INF]
gsl optimizer plugin based on the multimin optimizers ofthe GNU Scientific Library (GSL)
https://www.gnu.org/software/gsl/, supported parameters are:
eps = 0.01 (double)
gradient based optimizers: stop when |grad| < eps, simplex: stop when simplex size <
eps.. in [1e-10, 10]
iter = 100 (int)
maximum number of iterations. in [1, 2147483647]
opt = gd (dict)
Specific optimizer to be used.. Supported values are:
bfgs ‐ Broyden-Fletcher-Goldfarb-Shann
bfgs2 ‐ Broyden-Fletcher-Goldfarb-Shann (most efficient version)
cg-fr ‐ Flecher-Reeves conjugate gradient algorithm
gd ‐ Gradient descent.
simplex ‐ Simplex algorithm of Nelder and Mead
cg-pr ‐ Polak-Ribiere conjugate gradient algorithm
step = 0.001 (double)
initial step size. in [0, 10]
tol = 0.1 (double)
some tolerance parameter. in [0.001, 10]
nlopt Minimizer algorithms using the NLOPT library, for a description of the optimizers please see
'http://ab-initio.mit.edu/wiki/index.php/NLopt_Algorithms', supported parameters are:
ftola = 0 (double)
Stopping criterion: the absolute change of the objective value is below this value. in
[0, INF]
ftolr = 0 (double)
Stopping criterion: the relative change of the objective value is below this value. in
[0, INF]
higher = inf (double)
Higher boundary (equal for all parameters). in [INF, INF]
local-opt = none (dict)
local minimization algorithm that may be required for the main minimization algorithm..
Supported values are:
gn-orig-direct-l ‐ Dividing Rectangles (original implementation, locally biased)
gn-direct-l-noscal ‐ Dividing Rectangles (unscaled, locally biased)
gn-isres ‐ Improved Stochastic Ranking Evolution Strategy
ld-tnewton ‐ Truncated Newton
gn-direct-l-rand ‐ Dividing Rectangles (locally biased, randomized)
ln-newuoa ‐ Derivative-free Unconstrained Optimization by Iteratively Constructed
Quadratic Approximation
gn-direct-l-rand-noscale ‐ Dividing Rectangles (unscaled, locally biased, randomized)
gn-orig-direct ‐ Dividing Rectangles (original implementation)
ld-tnewton-precond ‐ Preconditioned Truncated Newton
ld-tnewton-restart ‐ Truncated Newton with steepest-descent restarting
gn-direct ‐ Dividing Rectangles
ln-neldermead ‐ Nelder-Mead simplex algorithm
ln-cobyla ‐ Constrained Optimization BY Linear Approximation
gn-crs2-lm ‐ Controlled Random Search with Local Mutation
ld-var2 ‐ Shifted Limited-Memory Variable-Metric, Rank 2
ld-var1 ‐ Shifted Limited-Memory Variable-Metric, Rank 1
ld-mma ‐ Method of Moving Asymptotes
ld-lbfgs-nocedal ‐ None
ld-lbfgs ‐ Low-storage BFGS
gn-direct-l ‐ Dividing Rectangles (locally biased)
none ‐ don't specify algorithm
ln-bobyqa ‐ Derivative-free Bound-constrained Optimization
ln-sbplx ‐ Subplex variant of Nelder-Mead
ln-newuoa-bound ‐ Derivative-free Bound-constrained Optimization by Iteratively
Constructed Quadratic Approximation
ln-praxis ‐ Gradient-free Local Optimization via the Principal-Axis Method
gn-direct-noscal ‐ Dividing Rectangles (unscaled)
ld-tnewton-precond-restart ‐ Preconditioned Truncated Newton with steepest-descent
restarting
lower = -inf (double)
Lower boundary (equal for all parameters). in [INF, INF]
maxiter = 100 (int)
Stopping criterion: the maximum number of iterations. in [1, 2147483647]
opt = ld-lbfgs (dict)
main minimization algorithm. Supported values are:
gn-orig-direct-l ‐ Dividing Rectangles (original implementation, locally biased)
g-mlsl-lds ‐ Multi-Level Single-Linkage (low-discrepancy-sequence, require local
gradient based optimization and bounds)
gn-direct-l-noscal ‐ Dividing Rectangles (unscaled, locally biased)
gn-isres ‐ Improved Stochastic Ranking Evolution Strategy
ld-tnewton ‐ Truncated Newton
gn-direct-l-rand ‐ Dividing Rectangles (locally biased, randomized)
ln-newuoa ‐ Derivative-free Unconstrained Optimization by Iteratively Constructed
Quadratic Approximation
gn-direct-l-rand-noscale ‐ Dividing Rectangles (unscaled, locally biased, randomized)
gn-orig-direct ‐ Dividing Rectangles (original implementation)
ld-tnewton-precond ‐ Preconditioned Truncated Newton
ld-tnewton-restart ‐ Truncated Newton with steepest-descent restarting
gn-direct ‐ Dividing Rectangles
auglag-eq ‐ Augmented Lagrangian algorithm with equality constraints only
ln-neldermead ‐ Nelder-Mead simplex algorithm
ln-cobyla ‐ Constrained Optimization BY Linear Approximation
gn-crs2-lm ‐ Controlled Random Search with Local Mutation
ld-var2 ‐ Shifted Limited-Memory Variable-Metric, Rank 2
ld-var1 ‐ Shifted Limited-Memory Variable-Metric, Rank 1
ld-mma ‐ Method of Moving Asymptotes
ld-lbfgs-nocedal ‐ None
g-mlsl ‐ Multi-Level Single-Linkage (require local optimization and bounds)
ld-lbfgs ‐ Low-storage BFGS
gn-direct-l ‐ Dividing Rectangles (locally biased)
ln-bobyqa ‐ Derivative-free Bound-constrained Optimization
ln-sbplx ‐ Subplex variant of Nelder-Mead
ln-newuoa-bound ‐ Derivative-free Bound-constrained Optimization by Iteratively
Constructed Quadratic Approximation
auglag ‐ Augmented Lagrangian algorithm
ln-praxis ‐ Gradient-free Local Optimization via the Principal-Axis Method
gn-direct-noscal ‐ Dividing Rectangles (unscaled)
ld-tnewton-precond-restart ‐ Preconditioned Truncated Newton with steepest-descent
restarting
ld-slsqp ‐ Sequential Least-Squares Quadratic Programming
step = 0 (double)
Initial step size for gradient free methods. in [0, INF]
stop = -inf (double)
Stopping criterion: function value falls below this value. in [INF, INF]
xtola = 0 (double)
Stopping criterion: the absolute change of all x-values is below this value. in [0,
INF]
xtolr = 0 (double)
Stopping criterion: the relative change of all x-values is below this value. in [0,
INF]
EXAMPLE
Register the perfusion series given in 'segment.set' by using automatic ICA estimation. Skip two images
at the beginning and otherwiese use the default parameters. Store the result in 'registered.set'.
mia-2dmyoica-nonrigid-parallel -i segment.set -o registered.set -k 2
AUTHOR(s)
Gert Wollny
COPYRIGHT
This software is Copyright (c) 1999‐2013 Leipzig, Germany and Madrid, Spain. It comes with ABSOLUTELY
NO WARRANTY and you may redistribute it under the terms of the GNU GENERAL PUBLIC LICENSE Version 3
(or later). For more information run the program with the option '--copyright'.