Provided by: minc-tools_2.2.00-3_amd64 
NAME
mincstats - calculate simple statistics across voxels of a minc file
SYNOPSIS
mincstats [<options>] <in1>.mnc
DESCRIPTION
Mincstats will calculate simple statistical measures across all voxels of a minc file. Note that these
are global statistical measures and not voxel-by-voxel measures (see mincaverage for that). By default
all statistics are calculated. If any statistics are requested via a command-line option, then only the
requested statistics are printed.
A very useful feature of this program is the ability to restrict the set of voxels included in the
statistic calculation, either by restricting the range of included values, or by using a mask file with a
restricted range. Multiple ranges for the input file or mask file can be specified. For each range of
included volume values, and for each range of mask values, the relevant statistics are printed out (n*m
values, where n is the number of volume ranges and m the number of mask ranges). These calculations are
done in a single pass through the data, so specifying multiple ranges is much faster than running the
program repeatedly. This is quite helpful when calculating many regional averages with a VOI mask volume.
Special mention should be given to histograms and related statistical measures. The default range of the
histogram is from the smallest value in the file to the largest. In the not uncommon, but special, case
when the number of histogram bins exactly matches the number of possible values in the file (e.g. 256
bins for full-range byte data), the histogram can end up with some odd features when using the default
histogram range. This arises from the discretization of the data that are then rebinned into a slightly
mismatched histgram. For the example of byte data, the values that should be used are 256 bins and a
histogram range that extends half a bin below the smallest value and half a bin above the largest. Use
option -discrete_histogram to work this out automatically, or use -integer_histogram to have bins of unit
width if the input data are inherently integer (e.g. label data). In general, one should be careful about
the rebinning of discretized data to a histogram with a bin size that is close to the level of
discretization.
OPTIONS
Note that options can be specified in abbreviated form (as long as they are unique) and can be given
anywhere on the command line.
General options
-clobber
Overwrite an existing file.
-noclobber
Don't overwrite an existing file (default).
-verbose
Print out extra information (more than the default).
-quiet Print out only the requested numbers
-max_buffer_size_in_kb size
Specify the maximum size of the internal buffers (in kbytes). Default is 4 MB.
Invalid value options
-ignore_nan
Exclude invalid values (outside valid range) from statistic calculations. This is the default.
-include_nan
Treat invalid values as zeros and include them in statistic calculations.
-replace_nan value
Replace invalid values with the specified value and include the new value in statistic
calculations.
Volume range options
-floor min1,min2,...
Comma-separated list of lower bounds for ranges of data to include in statistic calculation.
-ceil max1,max2,...
Comma-separated list of upper bounds for ranges of data to include in statistic calculation.
-range min1,max1,min2,max2,...
Comma-separated list of lower and upper bounds for ranges of data to include in statistic
calculation.
-binvalue val1,val2,...
Comma-separated list of integer values to include in statistic calculation. A range of +/- 0.5 is
defined around each specified value.
-mask filename.mnc
Name of file to be used for masking data included in statistic calculation. For this to have any
effect, you must specify a mask range with one of the following options.
-mask_floor min1,min2,...:
Like -floor, but applied to the mask file.
-mask_ceil max1,max2,...
Like -ceil, but applied to the mask file.
-mask_range min1,max1,min2,max2,...
Like -range, but applied to the mask file.
-mask_binvalue val1,val2,...
Like -binvalue, but applied to the mask file.
Histogram options
-histogram filename
Specify the name of a file into which the histogram is written. If multiple ranges or mask ranges
are specified, then all histograms are written in this file, separated by blank lines. Information
describing each histogram is written before it in lines starting with the hash (pound) character.
These files can be loaded into gnuplot.
-hist_bins number-of-bins
Specify number of bins in histogram.
-bins number-of-bins
Synonym for -hist_bins.
-hist_floor min
Specify lower bound for histogram.
-hist_ceil max
Specify upper bound for histogram.
-hist_range min max
Specify a range for the histogram
-integer_histogram
Create bins of unit width, centred around integer values. This is useful for integer data such as
labels. The histogram range is rounded to the nearest integer, then the min is lowered and the max
is raised by 0.5. The number of bins is taken as the difference of these two values. Note that
0.01 is added to the minimum and subtracted from the maximum prior to the rounding in order to
ensure that a correctly specified range (e.g. [0.5,255.5]) is preserved. If you want to have
integer bins that are wider than one, you will have to work out the histogram range and number of
bins yourself and not use this option.
-discrete_histogram
Attempt to match the histogram to the discretization of the input data. This is appropriate for
continuous data that are stored in an integer representation and when a bin width close to the
discretization is desired. This is similar to -integer_histogram, except that the the histogram
range is first converted to voxel values which are rounded and extended by half a bin on either
side. This new voxel range is then converted back to real values. The number of bins is taken as
the difference in the voxel value range. Note that this does not account for variations in slice-
to-slice scaling, so odd histogram effects may still occur. This option is intended to give
behaviour similar to that of volume_stats.
-int_max_bins number-of-bins
Specify the largest histogram that can be automatically sized with the above options. The limit
prevents accidental creation of huge histograms. This option replaced the old -max_bins option in
MINC 1.1.
Basic statistics
-all Compute all statistical measures. This is the default.
-none Synonym for -count (for similarity to volume_stats). Note that although this was necessary for
volume_stats, it is not needed here, since specifying any of these options automatically turns off
-all
-count Count the number of voxels that are within the range and mask.
-percent
Print the percentage of voxels within the range and mask
-volume
Print the volume of the voxels within the range and mask (in mm-cubed).
-min Print the minimum value.
-max Print the maximum value.
-sum Print the sum of all values.
-sum2 Print the sum of the squares of all values.
-mean Print the mean.
-variance
Print the variance.
-stddev
Print the standard deviation.
-CoM Print the centre of mass. Both the voxel coordinate and the world coordinates are printed. The
voxel coordinates are printed in file order, whilst the world coordinates are printed in x,y,z
order.
-com Synonym for -CoM.
-world_only
Print the centre of mass in world coordinates only.
Histogram statistics
Note that histogram statistics are derived solely from the histogram counts and bin centres, so results
such as the median will not be exactly the same as the true value for all included voxels. For example,
the error on the median can be as large as a half bin width. Furthermore, if the histogram range is less
than that of included voxels, then the result applies only to voxels included in the histogram.
-hist_count
Print number of voxels in histogram. This may be different from the number of included and masked
voxels if the histogram range is less than the range of the included data.
-hist_percent
Print percentage of voxels included in histogram.
-median
Print the histogram median.
-majority
Print the bin centre (intensity value) for the bin with the most counts.
-biModalT
Print the bi-modal threshold calculated using the method described in Otsu N, "A Threshold
Selection Method from Grey-level Histograms", IEEE Trans on Systems, Man and Cybernetics. 1979,
9:1; 62-66.
-pctT Print the threshold needed for a particular critical percentage of the histogram.
-entropy
Print the Shannon entropy.
H(x) = - Sum(P(i) * log2(P(i))
where P(i) is the bin probability
Generic options for all commands:
-help Print summary of command-line options and exit.
-version
Print the program's version number and exit.
AUTHOR
Andrew Janke
COPYRIGHTS
Program: Copyright © 2000 by Andrew Janke
Man page: Copyright © 2001 by Peter Neelin
$Date: 2004-05-20 21:52:09 $ MINCSTATS(1)