Provided by: pcp_3.8.12ubuntu1_amd64 
NAME
pmlogrewrite - rewrite Performance Co-Pilot archives
SYNOPSIS
$PCP_BINADM_DIR/pmlogrewrite [-Cdiqsvw ] [-c config] inlog [outlog]
DESCRIPTION
pmlogrewrite reads a Performance Co-Pilot (PCP) archive log identified by inlog and
creates a PCP archive log in outlog. Under normal usage, the -c option will be used to
nominate a configuration file or files that contains specifications (see the REWRITING
RULES SYNTAX section below) that describe how the data and metadata from inlog should be
transformed to produce outlog.
The typical uses for pmlogrewrite would be to accommodate the evolution of Performance
Metric Domain Agents (PMDAs) where the names, metadata and semantics of metrics and their
associated instance domains may change over time, e.g. promoting the type of a metric from
a 32-bit to a 64-bit integer, or renaming a group of metrics. Refer to the EXAMPLES
section for some additional use cases.
pmlogrewrite is most useful where PMDA changes, or errors in the production environment,
result in archives that cannot be combined with pmlogextract(1). By pre-processing the
archives with pmlogrewrite the resulting archives may be able to be merged with
pmlogextract(1).
The input inlog must be a PCP archive log created by pmlogger(1), or possibly one of the
tools that read and create PCP archives, e.g. pmlogextract(1) and pmlogreduce(1).
If no -c option is specified, then the default behavior simply creates outlog as a copy of
inlog. This is a little more complicated than cat(1), as each PCP archive is made up of
several physical files.
While pmlogrewrite may be used to repair some data consistency issues in PCP archives,
there is also a class of repair tasks that cannot be handled by pmlogrewrite and
pmloglabel(1) may be a useful tool in these cases.
COMMAND LINE OPTIONS
The command line options for pmlogrewrite are as follows:
-C Parse the rewriting rules and quit. outlog is not created. When -C is specified,
this also sets -v and -w so that all warnings and verbose messages are displayed as
config is parsed.
-c config
If config is a file or symbolic link, read and parse rewriting rules from there.
If config is a directory, then all of the files or symbolic links in that directory
(excluding those beginning with a period ``.'') will be used to provide the
rewriting rules. Multiple -c options are allowed.
-d Desperate mode. Normally if a fatal error occurs, all trace of the partially
written PCP archive outlog is removed. With the -d option, the partially created
outlog archive log is not removed.
-i Rather than creating outlog, inlog is rewritten in place when the -i option is
used. A new archive is created using temporary file names and then renamed to
inlog in such a way that if any errors (not warnings) are encountered, inlog
remains unaltered.
-q Quick mode, where if there are no rewriting actions to be performed (none of the
global data, instance domains or metrics from inlog will be changed), then
pmlogrewrite will exit (with status 0, so success) immediately after parsing the
configuration file(s) and outlog is not created.
-s When the ``units'' of a metric are changed, if the dimension in terms of space,
time and count is unaltered, then the scaling factor is being changed, e.g. BYTE to
KBYTE, or MSEC-1 to USEC-1, or the composite MBYTE.SEC-1 to KBYTE.USEC-1. The
motivation may be (a) that the original metadata was wrong but the values in inlog
are correct, or (b) the metadata is changing so the values need to change as well.
The default pmlogrewrite behaviour matches case (a). If case (b) applies, then use
the -s option and the values of all the metrics with a scale factor change in each
result will be rescaled. For finer control over value rescaling refer to the
RESCALE option for the UNITS clause of the metric rewriting rule described below.
-v Increase verbosity of diagnostic output.
-w Emit warnings. Normally pmlogrewrite remains silent for any warning that is not
fatal and it is expected that for a particular archive, some (or indeed, all) of
the rewriting specifications may not apply. For example, changes to a PMDA may be
captured in a set of rewriting rules, but a single archive may not contain all of
the modified metrics nor all of the modified instance domains and/or instances.
Because these cases are expected, they do not prevent pmlogrewrite executing, and
rules that do not apply to inlog are silently ignored by default. Similarly, some
rewriting rules may involve no change because the metadata in inlog already matches
the intent of the rewriting rule to correct data from a previous version of a PMDA.
The -w flag forces warnings to be emitted for all of these cases.
The argument outlog is required in all cases, except when -i is specified.
REWRITING RULES SYNTAX
A configuration file contains zero or more rewriting rules as defined below.
Keywords and special punctuation characters are shown below in bolditalic font and are
case-insensitive, so METRIC, metric and Metric are all equivalent in rewriting rules.
The character ``#'' introduces a comment and the remainder of the line is ignored.
Otherwise the input is relatively free format with optional white space (spaces, tabs or
newlines) between lexical items in the rules.
A global rewriting rule has the form:
GLOBAL { globalspec ... }
where globalspec is zero or more of the following clauses:
HOSTNAME -> hostname
Modifies the label records in the outlog PCP archive, so that the metrics will
appear to have been collected from the host hostname.
TIME -> delta
Both metric values and the instance domain metadata in a PCP archive carry
timestamps. This clause forces all the timestamps to be adjusted by delta, where
delta is an optional sign ``+'' (the default) or ``-'', an optional number of
hours followed by a colon ``:'', an optional number of minutes followed by a colon
``:'', a number of seconds, an optional fraction of seconds following a period
``.''. The simplest example would be ``30'' to increase the timestamps by 30
seconds. A more complex example would be ``-23:59:59.999'' to move the timestamps
backwards by one millisecond less than one day.
TZ -> "timezone"
Modifies the label records in the outlog PCP archive, so that the metrics will
appear to have been collected from a host with a local timezone of timezone.
timezone must be enclosed in quotes, and should conform to the valid timezone
syntax rules for the local platform.
An indom rewriting rule modifies an instance domain and has the form:
INDOM domain.serial { indomspec ... }
where domain and serial identify one or more existing instance domains from inlog -
typically domain would be an integer in the range 1 to 510 and serial would be an integer
in the range 0 to 4194304.
As a special case serial could be an asterisk ``*'' which means the rule applies to every
instance domain with a domain number of domain.
If a designated instance domain is not in inlog the rule has no effect.
The indomspec is zero or more of the following clauses:
INAME "oldname" -> "newname"
The instance identified by the external instance name oldname is renamed to
newname. Both oldname and newname must be enclosed in quotes.
As a special case, the new name may be the keyword DELETE (with no quotes), and
then the instance oldname will be expunged from outlog which removes it from the
instance domain metadata and removes all values of this instance for all the
associated metrics.
If the instance names contain any embedded spaces then special care needs to be
taken in respect of the PCP instance naming rule that treats the leading non-space
part of the instance name as the unique portion of the name for the purposes of
matching and ensuring uniqueness within an instance domain, refer to
pmdaInstance(3) for a discussion of this issue.
As an illustration, consider the hypothetical instance domain for a metric which
contains 2 instances with the following names:
red
eek urk
Then some possible INAME clauses might be:
"eek" -> "yellow like a flower"
Acceptable, oldname "eek" matches the "eek urk" instance.
"red" -> "eek"
Error, newname "eek" matches the existing "eek urk" instance.
"eek urk" -> "red of another hue"
Error, newname "red of another hue" matches the existing "red" instance.
INDOM -> newdomain.newserial
Modifies the metadata for the instance domain and every metric associated with the
instance domain. As a special case, newserial could be an asterisk ``*'' which
means use serial from the indom rewriting rule, although this is most useful when
serial is also an asterisk. So for example:
indom 29.* { indom -> 109.* }
will move all instance domains from domain 29 to domain 109.
INDOM -> DUPLICATE newdomain.newserial
A special case of the previous INDOM clause where the instance domain is a
duplicate copy of the domain.serial instance domain from the indom rewriting rule,
and then any mapping rules are applied to the copied newdomain.newserial instance
domain. This is useful when a PMDA is split and the same instance domain needs to
be replicated for domain domain and domain newdomain. So for example if the
metrics foo.one and foo.two are both defined over instance domain 12.34, and
foo.two is moved to another PMDA using domain 27, then the following rewriting
rules could be used:
indom 12.34 { indom -> duplicate 27.34 }
metric foo.two { indom -> 27.34 pmid -> 27.*.* }
INST oldid -> newid
The instance identified by the internal instance identifier oldid is renumbered to
newid. Both oldid and newid are integers in the range 0 to 231-1.
As a special case, newid may be the keyword DELETE and then the instance oldid
will be expunged from outlog which removes it from the instance domain metadata
and removes all values of this instance for all the associated metrics.
A metric rewriting rule has the form:
METRIC metricid { metricspec ... }
where metricid identifies one or more existing metrics from inlog using either a metric
name, or the internal encoding for a metric's PMID as domain.cluster.item. In the latter
case, typically domain would be an integer in the range 1 to 510, cluster would be an
integer in the range 0 to 4095, and item would be an integer in the range 0 to 1023.
As special cases item could be an asterisk ``*'' which means the rule applies to every
metric with a domain number of domain and a cluster number of cluster, or cluster could be
an asterisk which means the rule applies to every metric with a domain number of domain
and an item number of item, or both cluster and item could be asterisks, and rule applies
to every metric with a domain number of domain.
If a designated metric is not in inlog the rule has no effect.
The metricspec is zero or more of the following clauses:
DELETE
The metric is completely removed from outlog, both the metadata and all values in
results are expunged.
INDOM -> newdomain.newserial [ pick ]
Modifies the metadata to change the instance domain for this metric. The new
instance domain must exist in outlog.
The optional pick clause may be used to select one input value, or compute an
aggregate value from the instances in an input result, or assign an internal
instance identifier to a single output value. If no pick clause is specified, the
default behaviour is to copy all input values from each input result to an output
result, however if the input instance domain is singular (indom PM_INDOM_NULL)
then the one output value must be assigned an internal instance identifier, which
is 0 by default, unless over-ridden by a INST or INAME clause as defined below.
The choices for pick are as follows:
OUTPUT FIRST
choose the value of the first instance from each input result
OUTPUT LAST choose the value of the last instance from each input result
OUTPUT INST instid
choose the value of the instance with internal instance identifier
instid from each result; the sequence of rewriting rules ensures the
OUTPUT processing happens before instance identifier renumbering from
any associated indom rule, so instid should be one of the internal
instance identifiers that appears in inlog
OUTPUT INAME "name"
choose the value of the instance with name for its external instance
name from each result; the sequence of rewriting rules ensures the
OUTPUT processing happens before instance renaming from any associated
indom rule, so name should be one of the external instance names that
appears in inlog
OUTPUT MIN choose the smallest value in each result (metric type must be numeric
and output instance will be 0 for a non-singular instance domain)
OUTPUT MAX choose the largest value in each result (metric type must be numeric
and output instance will be 0 for a non-singular instance domain)
OUTPUT SUM choose the sum of all values in each result (metric type must be
numeric and output instance will be 0 for a non-singular instance
domain)
OUTPUT AVG choose the average of all values in each result (metric type must be
numeric and output instance will be 0 for a non-singular instance
domain)
If the input instance domain is singular (indom PM_INDOM_NULL) then independent of
any pick specifications, there is at most one value in each input result and so
FIRST, LAST, MIN, MAX, SUM and AVG are all equivalent and the output instance
identifier will be 0.
In general it is an error to specify a rewriting action for the same metadata or
result values more than once, e.g. more than one INDOM clause for the same
instance domain. The one exception is the possible interaction between the INDOM
clauses in the indom and metric rules. For example the metric sample.bin is
defined over the instance domain 29.2 in inlog and the following is acceptable
(albeit redundant):
indom 29.* { indom -> 109.* }
metric sample.bin { indom -> 109.2 }
However the following is an error, because the instance domain for sample.bin has
two conflicting definitions:
indom 29.* { indom -> 109.* }
metric sample.bin { indom -> 123.2 }
INDOM -> NULL[ pick ]
The metric (which must have been previously defined over an instance domain) is
being modified to be a singular metric. This involves a metadata change and
collapsing all results for this metric so that multiple values become one value.
The optional pick part of the clause defines how the one value for each result
should be calculated and follows the same rules as described for the non-NULL
INDOM case above.
In the absence of pick, the default is OUTPUT FIRST.
NAME -> newname
Renames the metric in the PCP archive's metadata that supports the Performance
Metrics Name Space (PMNS). newname should not match any existing name in the
archive's PMNS and must follow the syntactic rules for valid metric names as
outlined in pmns(5).
PMID -> newdomain.newcluster.newitem
Modifies the metadata and results to renumber the metric's PMID. As special
cases, newcluster could be an asterisk ``*'' which means use cluster from the
metric rewriting rule and/or item could be an asterisk which means use item from
the metric rewriting rule. This is most useful when cluster and/or item is also
an asterisk. So for example:
metric 30.*.* { pmid -> 123.*.* }
will move all metrics from domain 30 to domain 123.
SEM -> newsem
Change the semantics of the metric. newsem should be the XXX part of the name of
one of the PM_SEM_XXX macros defined in <pcp/pmapi.h> or pmLookupDesc(3), e.g.
COUNTER for PM_TYPE_COUNTER.
No data value rewriting is performed as a result of the SEM clause, so the
usefulness is limited to cases where a version of the associated PMDA was
exporting incorrect semantics for the metric. pmlogreduce(1) may provide an
alternative in cases where re-computation of result values is desired.
TYPE -> newtype
Change the type of the metric which alters the metadata and may change the
encoding of values in results. newtype should be the XXX part of the name of one
of the PM_TYPE_XXX macros defined in <pcp/pmapi.h> or pmLookupDesc(3), e.g. FLOAT
for PM_TYPE_FLOAT.
Type conversion is only supported for cases where the old and new metric type is
numeric, so PM_TYPE_STRING, PM_TYPE_AGGREGATE and PM_TYPE_EVENT are not allowed.
Even for the numeric cases, some conversions may produce run-time errors, e.g.
integer overflow, or attempting to rewrite a negative value into an unsigned type.
UNITS -> newunits [ RESCALE ]
newunits is six values separated by commas. The first 3 values describe the
dimension of the metric along the dimensions of space, time and count; these are
integer values, usually 0, 1 or -1. The remaining 3 values describe the scale of
the metric's values in the dimensions of space, time and count. Space scale
values should be 0 (if the space dimension is 0), else the XXX part of the name of
one of the PM_SPACE_XXX macros, e.g. KBYTE for PM_TYPE_KBYTE. Time scale values
should be 0 (if the time dimension is 0), else the XXX part of the name of one of
the PM_TIME_XXX macros, e.g. SEC for PM_TIME_SEC. Count scale values should be 0
(if the time dimension is 0), else ONE for PM_COUNT_ONE.
The PM_SPACE_XXX, PM_TIME_XXX and PM_COUNT_XXX macros are defined in <pcp/pmapi.h>
or pmLookupDesc(3).
When the scale is changed (but the dimension is unaltered) the optional keyword
RESCALE may be used to chose value rescaling as per the -s command line option,
but applied to just this metric.
When changing the domain number for a metric or instance domain, the new domain number
will usually match an existing PMDA's domain number. If this is not the case, then
the new domain number should not be randomly chosen; consult $PCP_VAR_DIR/pmns/stdpmid
for domain numbers that are already assigned to PMDAs.
EXAMPLES
To promote the values of the per-disk IOPS metrics to 64-bit to allow aggregation over a
long time period for capacity planning, or because the PMDA has changed to export 64-bit
counters and we want to convert old archives so they can be processed alongside new
archives.
metric disk.dev.read { type -> U64 }
metric disk.dev.write { type -> U64 }
metric disk.dev.total { type -> U64 }
The instances associated with the load average metric kernel.all.load could be renamed and
renumbered by the rules below.
# for the Linux PMDA, the kernel.all.load metric is defined
# over instance domain 60.2
indom 60.2 {
inst 1 -> 60 iname "1 minute" -> "60 second"
inst 5 -> 300 iname "5 minute" -> "300 second"
inst 15 -> 900 iname "15 minute" -> "900 second"
}
If we decide to split the ``proc'' metrics out of the Linux PMDA, this will involve
changing the domain number for the PMID of these metrics and the associated instance
domains. The rules below would rewrite an old archive to match the changes after the PMDA
split.
# all Linux proc metrics are in 7 clusters
metric 60.8.* { pmid -> 123.*.* }
metric 60.9.* { pmid -> 123.*.* }
metric 60.13.* { pmid -> 123.*.* }
metric 60.24.* { pmid -> 123.*.* }
metric 60.31.* { pmid -> 123.*.* }
metric 60.32.* { pmid -> 123.*.* }
metric 60.51.* { pmid -> 123.*.* }
# only one instance domain for Linux proc metrics
indom 60.9 { indom -> 123.0 }
FILES
For each of the inlog and outlog archive logs, several physical files are used.
archive.meta
metadata (metric descriptions, instance domains, etc.) for the archive log
archive.0 initial volume of metrics values (subsequent volumes have suffixes 1, 2, ...).
archive.index
temporal index to support rapid random access to the other files in the archive
log.
PCP ENVIRONMENT
Environment variables with the prefix PCP_ are used to parameterize the file and directory
names used by PCP. On each installation, the file /etc/pcp.conf contains the local values
for these variables. The $PCP_CONF variable may be used to specify an alternative
configuration file, as described in pcp.conf(5).
SEE ALSO
PCPIntro(1), pmdaInstance(3), pmdumplog(1), pmlogger(1), pmlogextract(1), pmloglabel(1),
pmlogreduce(1), pmLookupDesc(3), pmns(5), pcp.conf(5) and pcp.env(5).
DIAGNOSTICS
All error conditions detected by pmlogrewrite are reported on stderr with textual (if
sometimes terse) explanation.
Should the input archive log be corrupted (this can happen if the pmlogger instance
writing the log suddenly dies), then pmlogrewrite will detect and report the position of
the corruption in the file, and any subsequent information from that archive log will not
be processed.
If any error is detected, pmlogrewrite will exit with a non-zero status.