Provided by: percona-toolkit_2.2.7-1~dfsg1_all 
NAME
pt-online-schema-change - ALTER tables without locking them.
SYNOPSIS
Usage: pt-online-schema-change [OPTIONS] DSN
pt-online-schema-change alters a table's structure without blocking reads or writes.
Specify the database and table in the DSN. Do not use this tool before reading its
documentation and checking your backups carefully.
Add a column to sakila.actor:
pt-online-schema-change --alter "ADD COLUMN c1 INT" D=sakila,t=actor
Change sakila.actor to InnoDB, effectively performing OPTIMIZE TABLE in a non-blocking
fashion because it is already an InnoDB table:
pt-online-schema-change --alter "ENGINE=InnoDB" D=sakila,t=actor
RISKS
Percona Toolkit is mature, proven in the real world, and well tested, but all database
tools can pose a risk to the system and the database server. Before using this tool,
please:
• Read the tool's documentation
• Review the tool's known "BUGS"
• Test the tool on a non-production server
• Backup your production server and verify the backups
DESCRIPTION
pt-online-schema-change emulates the way that MySQL alters tables internally, but it works
on a copy of the table you wish to alter. This means that the original table is not
locked, and clients may continue to read and change data in it.
pt-online-schema-change works by creating an empty copy of the table to alter, modifying
it as desired, and then copying rows from the original table into the new table. When the
copy is complete, it moves away the original table and replaces it with the new one. By
default, it also drops the original table.
The data copy process is performed in small chunks of data, which are varied to attempt to
make them execute in a specific amount of time (see "--chunk-time"). This process is very
similar to how other tools, such as pt-table-checksum, work. Any modifications to data in
the original tables during the copy will be reflected in the new table, because the tool
creates triggers on the original table to update the corresponding rows in the new table.
The use of triggers means that the tool will not work if any triggers are already defined
on the table.
When the tool finishes copying data into the new table, it uses an atomic "RENAME TABLE"
operation to simultaneously rename the original and new tables. After this is complete,
the tool drops the original table.
Foreign keys complicate the tool's operation and introduce additional risk. The technique
of atomically renaming the original and new tables does not work when foreign keys refer
to the table. The tool must update foreign keys to refer to the new table after the schema
change is complete. The tool supports two methods for accomplishing this. You can read
more about this in the documentation for "--alter-foreign-keys-method".
Foreign keys also cause some side effects. The final table will have the same foreign keys
and indexes as the original table (unless you specify differently in your ALTER
statement), but the names of the objects may be changed slightly to avoid object name
collisions in MySQL and InnoDB.
For safety, the tool does not modify the table unless you specify the "--execute" option,
which is not enabled by default. The tool supports a variety of other measures to prevent
unwanted load or other problems, including automatically detecting replicas, connecting to
them, and using the following safety checks:
• The tool refuses to operate if it detects replication filters. See
"--[no]check-replication-filters" for details.
• The tool pauses the data copy operation if it observes any replicas that are delayed
in replication. See "--max-lag" for details.
• The tool pauses or aborts its operation if it detects too much load on the server. See
"--max-load" and "--critical-load" for details.
• The tool sets "innodb_lock_wait_timeout=1" and (for MySQL 5.5 and newer)
"lock_wait_timeout=60" so that it is more likely to be the victim of any lock
contention, and less likely to disrupt other transactions. These values can be
changed by specifying "--set-vars".
• The tool refuses to alter the table if foreign key constraints reference it, unless
you specify "--alter-foreign-keys-method".
• The tool cannot alter MyISAM tables on "Percona XtraDB Cluster" nodes.
Percona XtraDB Cluster
pt-online-schema-change works with Percona XtraDB Cluster (PXC) 5.5.28-23.7 and newer, but
there are two limitations: only InnoDB tables can be altered, and "wsrep_OSU_method" must
be set to "TOI" (total order isolation). The tool exits with an error if the host is a
cluster node and the table is MyISAM or is being converted to MyISAM ("ENGINE=MyISAM"), or
if "wsrep_OSU_method" is not "TOI". There is no way to disable these checks.
OUTPUT
The tool prints information about its activities to STDOUT so that you can see what it is
doing. During the data copy phase, it prints "--progress" reports to STDERR. You can get
additional information by specifying "--print".
If "--statistics" is specified, a report of various internal event counts is printed at
the end, like:
# Event Count
# ====== =====
# INSERT 1
OPTIONS
"--dry-run" and "--execute" are mutually exclusive.
This tool accepts additional command-line arguments. Refer to the "SYNOPSIS" and usage
information for details.
--alter
type: string
The schema modification, without the ALTER TABLE keywords. You can perform multiple
modifications to the table by specifying them with commas. Please refer to the MySQL
manual for the syntax of ALTER TABLE.
The following limitations apply which, if attempted, will cause the tool to fail in
unpredictable ways:
• The "RENAME" clause cannot be used to rename the table.
• Columns cannot be renamed by dropping and re-adding with the new name. The tool
will not copy the original column's data to the new column.
• If you add a column without a default value and make it NOT NULL, the tool will
fail, as it will not try to guess a default value for you; You must specify the
default.
• "DROP FOREIGN KEY constraint_name" requires specifying "_constraint_name" rather
than the real "constraint_name". Due to a limitation in MySQL, pt-online-schema-
change adds a leading underscore to foreign key constraint names when creating the
new table. For example, to drop this constraint:
CONSTRAINT `fk_foo` FOREIGN KEY (`foo_id`) REFERENCES `bar` (`foo_id`)
You must specify "--alter "DROP FOREIGN KEY _fk_foo"".
• The tool does not use "LOCK IN SHARE MODE" with MySQL 5.0 because it can cause a
slave error which breaks replication:
Query caused different errors on master and slave. Error on master:
'Deadlock found when trying to get lock; try restarting transaction' (1213),
Error on slave: 'no error' (0). Default database: 'pt_osc'.
Query: 'INSERT INTO pt_osc.t (id, c) VALUES ('730', 'new row')'
The error happens when converting a MyISAM table to InnoDB because MyISAM is non-
transactional but InnoDB is transactional. MySQL 5.1 and newer handle this case
correctly, but testing reproduces the error 5% of the time with MySQL 5.0.
This is a MySQL bug, similar to <http://bugs.mysql.com/bug.php?id=45694>, but
there is no fix or workaround in MySQL 5.0. Without "LOCK IN SHARE MODE", tests
pass 100% of the time, so the risk of data loss or breaking replication should be
negligible.
Be sure to verify the new table if using MySQL 5.0 and converting from MyISAM to
InnoDB!
--alter-foreign-keys-method
type: string
How to modify foreign keys so they reference the new table. Foreign keys that
reference the table to be altered must be treated specially to ensure that they
continue to reference the correct table. When the tool renames the original table to
let the new one take its place, the foreign keys "follow" the renamed table, and must
be changed to reference the new table instead.
The tool supports two techniques to achieve this. It automatically finds "child
tables" that reference the table to be altered.
auto
Automatically determine which method is best. The tool uses "rebuild_constraints"
if possible (see the description of that method for details), and if not, then it
uses "drop_swap".
rebuild_constraints
This method uses "ALTER TABLE" to drop and re-add foreign key constraints that
reference the new table. This is the preferred technique, unless one or more of
the "child" tables is so large that the "ALTER" would take too long. The tool
determines that by comparing the number of rows in the child table to the rate at
which the tool is able to copy rows from the old table to the new table. If the
tool estimates that the child table can be altered in less time than the
"--chunk-time", then it will use this technique. For purposes of estimating the
time required to alter the child table, the tool multiplies the row-copying rate
by "--chunk-size-limit", because MySQL's "ALTER TABLE" is typically much faster
than the external process of copying rows.
Due to a limitation in MySQL, foreign keys will not have the same names after the
ALTER that they did prior to it. The tool has to rename the foreign key when it
redefines it, which adds a leading underscore to the name. In some cases, MySQL
also automatically renames indexes required for the foreign key.
drop_swap
Disable foreign key checks (FOREIGN_KEY_CHECKS=0), then drop the original table
before renaming the new table into its place. This is different from the normal
method of swapping the old and new table, which uses an atomic "RENAME" that is
undetectable to client applications.
This method is faster and does not block, but it is riskier for two reasons.
First, for a short time between dropping the original table and renaming the
temporary table, the table to be altered simply does not exist, and queries
against it will result in an error. Secondly, if there is an error and the new
table cannot be renamed into the place of the old one, then it is too late to
abort, because the old table is gone permanently.
This method forces "--no-swap-tables" and "--no-drop-old-table".
none
This method is like "drop_swap" without the "swap". Any foreign keys that
referenced the original table will now reference a nonexistent table. This will
typically cause foreign key violations that are visible in "SHOW ENGINE INNODB
STATUS", similar to the following:
Trying to add to index `idx_fk_staff_id` tuple:
DATA TUPLE: 2 fields;
0: len 1; hex 05; asc ;;
1: len 4; hex 80000001; asc ;;
But the parent table `sakila`.`staff_old`
or its .ibd file does not currently exist!
This is because the original table (in this case, sakila.staff) was renamed to
sakila.staff_old and then dropped. This method of handling foreign key constraints
is provided so that the database administrator can disable the tool's built-in
functionality if desired.
--ask-pass
Prompt for a password when connecting to MySQL.
--charset
short form: -A; type: string
Default character set. If the value is utf8, sets Perl's binmode on STDOUT to utf8,
passes the mysql_enable_utf8 option to DBD::mysql, and runs SET NAMES UTF8 after
connecting to MySQL. Any other value sets binmode on STDOUT without the utf8 layer,
and runs SET NAMES after connecting to MySQL.
--[no]check-alter
default: yes
Parses the "--alter" specified and tries to warn of possible unintended behavior.
Currently, it checks for:
Column renames
In previous versions of the tool, renaming a column with "CHANGE COLUMN name
new_name" would lead to that column's data being lost. The tool now parses the
alter statement and tries to catch these cases, so the renamed columns should have
the same data as the originals. However, the code that does this is not a full-
blown SQL parser, so you should first run the tool with "--dry-run" and "--print"
and verify that it detects the renamed columns correctly.
DROP PRIMARY KEY
If "--alter" contain "DROP PRIMARY KEY" (case- and space-insensitive), a warning
is printed and the tool exits unless "--dry-run" is specified. Altering the
primary key can be dangerous, but the tool can handle it. The tool's triggers,
particularly the DELETE trigger, are most affected by altering the primary key
because the tool prefers to use the primary key for its triggers. You should
first run the tool with "--dry-run" and "--print" and verify that the triggers are
correct.
--check-interval
type: time; default: 1
Sleep time between checks for "--max-lag".
--[no]check-plan
default: yes
Check query execution plans for safety. By default, this option causes the tool to run
EXPLAIN before running queries that are meant to access a small amount of data, but
which could access many rows if MySQL chooses a bad execution plan. These include the
queries to determine chunk boundaries and the chunk queries themselves. If it appears
that MySQL will use a bad query execution plan, the tool will skip the chunk of the
table.
The tool uses several heuristics to determine whether an execution plan is bad. The
first is whether EXPLAIN reports that MySQL intends to use the desired index to access
the rows. If MySQL chooses a different index, the tool considers the query unsafe.
The tool also checks how much of the index MySQL reports that it will use for the
query. The EXPLAIN output shows this in the key_len column. The tool remembers the
largest key_len seen, and skips chunks where MySQL reports that it will use a smaller
prefix of the index. This heuristic can be understood as skipping chunks that have a
worse execution plan than other chunks.
The tool prints a warning the first time a chunk is skipped due to a bad execution
plan in each table. Subsequent chunks are skipped silently, although you can see the
count of skipped chunks in the SKIPPED column in the tool's output.
This option adds some setup work to each table and chunk. Although the work is not
intrusive for MySQL, it results in more round-trips to the server, which consumes
time. Making chunks too small will cause the overhead to become relatively larger. It
is therefore recommended that you not make chunks too small, because the tool may take
a very long time to complete if you do.
--[no]check-replication-filters
default: yes
Abort if any replication filter is set on any server. The tool looks for server
options that filter replication, such as binlog_ignore_db and replicate_do_db. If it
finds any such filters, it aborts with an error.
If the replicas are configured with any filtering options, you should be careful not
to modify any databases or tables that exist on the master and not the replicas,
because it could cause replication to fail. For more information on replication
rules, see <http://dev.mysql.com/doc/en/replication-rules.html>.
--check-slave-lag
type: string
Pause the data copy until this replica's lag is less than "--max-lag". The value is a
DSN that inherits properties from the the connection options ("--port", "--user",
etc.). This option overrides the normal behavior of finding and continually
monitoring replication lag on ALL connected replicas. If you don't want to monitor
ALL replicas, but you want more than just one replica to be monitored, then use the
DSN option to the "--recursion-method" option instead of this option.
--chunk-index
type: string
Prefer this index for chunking tables. By default, the tool chooses the most
appropriate index for chunking. This option lets you specify the index that you
prefer. If the index doesn't exist, then the tool will fall back to its default
behavior of choosing an index. The tool adds the index to the SQL statements in a
"FORCE INDEX" clause. Be careful when using this option; a poor choice of index could
cause bad performance.
--chunk-index-columns
type: int
Use only this many left-most columns of a "--chunk-index". This works only for
compound indexes, and is useful in cases where a bug in the MySQL query optimizer
(planner) causes it to scan a large range of rows instead of using the index to locate
starting and ending points precisely. This problem sometimes occurs on indexes with
many columns, such as 4 or more. If this happens, the tool might print a warning
related to the "--[no]check-plan" option. Instructing the tool to use only the first
N columns of the index is a workaround for the bug in some cases.
--chunk-size
type: size; default: 1000
Number of rows to select for each chunk copied. Allowable suffixes are k, M, G.
This option can override the default behavior, which is to adjust chunk size
dynamically to try to make chunks run in exactly "--chunk-time" seconds. When this
option isn't set explicitly, its default value is used as a starting point, but after
that, the tool ignores this option's value. If you set this option explicitly,
however, then it disables the dynamic adjustment behavior and tries to make all chunks
exactly the specified number of rows.
There is a subtlety: if the chunk index is not unique, then it's possible that chunks
will be larger than desired. For example, if a table is chunked by an index that
contains 10,000 of a given value, there is no way to write a WHERE clause that matches
only 1,000 of the values, and that chunk will be at least 10,000 rows large. Such a
chunk will probably be skipped because of "--chunk-size-limit".
--chunk-size-limit
type: float; default: 4.0
Do not copy chunks this much larger than the desired chunk size.
When a table has no unique indexes, chunk sizes can be inaccurate. This option
specifies a maximum tolerable limit to the inaccuracy. The tool uses <EXPLAIN> to
estimate how many rows are in the chunk. If that estimate exceeds the desired chunk
size times the limit, then the tool skips the chunk.
The minimum value for this option is 1, which means that no chunk can be larger than
"--chunk-size". You probably don't want to specify 1, because rows reported by
EXPLAIN are estimates, which can be different from the real number of rows in the
chunk. You can disable oversized chunk checking by specifying a value of 0.
The tool also uses this option to determine how to handle foreign keys that reference
the table to be altered. See "--alter-foreign-keys-method" for details.
--chunk-time
type: float; default: 0.5
Adjust the chunk size dynamically so each data-copy query takes this long to execute.
The tool tracks the copy rate (rows per second) and adjusts the chunk size after each
data-copy query, so that the next query takes this amount of time (in seconds) to
execute. It keeps an exponentially decaying moving average of queries per second, so
that if the server's performance changes due to changes in server load, the tool
adapts quickly.
If this option is set to zero, the chunk size doesn't auto-adjust, so query times will
vary, but query chunk sizes will not. Another way to do the same thing is to specify a
value for "--chunk-size" explicitly, instead of leaving it at the default.
--config
type: Array
Read this comma-separated list of config files; if specified, this must be the first
option on the command line.
--critical-load
type: Array; default: Threads_running=50
Examine SHOW GLOBAL STATUS after every chunk, and abort if the load is too high. The
option accepts a comma-separated list of MySQL status variables and thresholds. An
optional "=MAX_VALUE" (or ":MAX_VALUE") can follow each variable. If not given, the
tool determines a threshold by examining the current value at startup and doubling it.
See "--max-load" for further details. These options work similarly, except that this
option will abort the tool's operation instead of pausing it, and the default value is
computed differently if you specify no threshold. The reason for this option is as a
safety check in case the triggers on the original table add so much load to the server
that it causes downtime. There is probably no single value of Threads_running that is
wrong for every server, but a default of 50 seems likely to be unacceptably high for
most servers, indicating that the operation should be canceled immediately.
--database
short form: -D; type: string
Connect to this database.
--default-engine
Remove "ENGINE" from the new table.
By default the new table is created with the same table options as the original table,
so if the original table uses InnoDB, then the new table will use InnoDB. In certain
cases involving replication, this may cause unintended changes on replicas which use a
different engine for the same table. Specifying this option causes the new table to
be created with the system's default engine.
--defaults-file
short form: -F; type: string
Only read mysql options from the given file. You must give an absolute pathname.
--[no]drop-new-table
default: yes
Drop the new table if copying the original table fails.
Specifying "--no-drop-new-table" and "--no-swap-tables" leaves the new, altered copy
of the table without modifying the original table. See "--new-table-name".
--no-drop-new-table does not work with "alter-foreign-keys-method drop_swap".
--[no]drop-old-table
default: yes
Drop the original table after renaming it. After the original table has been
successfully renamed to let the new table take its place, and if there are no errors,
the tool drops the original table by default. If there are any errors, the tool leaves
the original table in place.
If "--no-swap-tables" is specified, then there is no old table to drop.
--[no]drop-triggers
default: yes
Drop triggers on the old table. "--no-drop-triggers" forces "--no-drop-old-table".
--dry-run
Create and alter the new table, but do not create triggers, copy data, or replace the
original table.
--execute
Indicate that you have read the documentation and want to alter the table. You must
specify this option to alter the table. If you do not, then the tool will only perform
some safety checks and exit. This helps ensure that you have read the documentation
and understand how to use this tool. If you have not read the documentation, then do
not specify this option.
--help
Show help and exit.
--host
short form: -h; type: string
Connect to host.
--max-lag
type: time; default: 1s
Pause the data copy until all replicas' lag is less than this value. After each data-
copy query (each chunk), the tool looks at the replication lag of all replicas to
which it connects, using Seconds_Behind_Master. If any replica is lagging more than
the value of this option, then the tool will sleep for "--check-interval" seconds,
then check all replicas again. If you specify "--check-slave-lag", then the tool only
examines that server for lag, not all servers. If you want to control exactly which
servers the tool monitors, use the DSN value to "--recursion-method".
The tool waits forever for replicas to stop lagging. If any replica is stopped, the
tool waits forever until the replica is started. The data copy continues when all
replicas are running and not lagging too much.
The tool prints progress reports while waiting. If a replica is stopped, it prints a
progress report immediately, then again at every progress report interval.
--max-load
type: Array; default: Threads_running=25
Examine SHOW GLOBAL STATUS after every chunk, and pause if any status variables are
higher than their thresholds. The option accepts a comma-separated list of MySQL
status variables. An optional "=MAX_VALUE" (or ":MAX_VALUE") can follow each
variable. If not given, the tool determines a threshold by examining the current
value and increasing it by 20%.
For example, if you want the tool to pause when Threads_connected gets too high, you
can specify "Threads_connected", and the tool will check the current value when it
starts working and add 20% to that value. If the current value is 100, then the tool
will pause when Threads_connected exceeds 120, and resume working when it is below 120
again. If you want to specify an explicit threshold, such as 110, you can use either
"Threads_connected:110" or "Threads_connected=110".
The purpose of this option is to prevent the tool from adding too much load to the
server. If the data-copy queries are intrusive, or if they cause lock waits, then
other queries on the server will tend to block and queue. This will typically cause
Threads_running to increase, and the tool can detect that by running SHOW GLOBAL
STATUS immediately after each query finishes. If you specify a threshold for this
variable, then you can instruct the tool to wait until queries are running normally
again. This will not prevent queueing, however; it will only give the server a chance
to recover from the queueing. If you notice queueing, it is best to decrease the
chunk time.
--new-table-name
type: string; default: %T_new
New table name before it is swapped. %T is replaced with the original table name.
When the default is used, the tool prefixes the name with up to 10 "_" (underscore) to
find a unique table name. If a table name is specified, the tool does not prefix it
with "_", so the table must not exist.
--password
short form: -p; type: string
Password to use when connecting.
--pid
type: string
Create the given PID file. The tool won't start if the PID file already exists and
the PID it contains is different than the current PID. However, if the PID file
exists and the PID it contains is no longer running, the tool will overwrite the PID
file with the current PID. The PID file is removed automatically when the tool exits.
--plugin
type: string
Perl module file that defines a "pt_online_schema_change_plugin" class. A plugin
allows you to write a Perl module that can hook into many parts of pt-online-schema-
change. This requires a good knowledge of Perl and Percona Toolkit conventions, which
are beyond this scope of this documentation. Please contact Percona if you have
questions or need help.
See "PLUGIN" for more information.
--port
short form: -P; type: int
Port number to use for connection.
--print
Print SQL statements to STDOUT. Specifying this option allows you to see most of the
statements that the tool executes. You can use this option with "--dry-run", for
example.
--progress
type: array; default: time,30
Print progress reports to STDERR while copying rows. The value is a comma-separated
list with two parts. The first part can be percentage, time, or iterations; the
second part specifies how often an update should be printed, in percentage, seconds,
or number of iterations.
--quiet
short form: -q
Do not print messages to STDOUT (disables "--progress"). Errors and warnings are
still printed to STDERR.
--recurse
type: int
Number of levels to recurse in the hierarchy when discovering replicas. Default is
infinite. See also "--recursion-method".
--recursion-method
type: array; default: processlist,hosts
Preferred recursion method for discovering replicas. Possible methods are:
METHOD USES
=========== ==================
processlist SHOW PROCESSLIST
hosts SHOW SLAVE HOSTS
dsn=DSN DSNs from a table
none Do not find slaves
The processlist method is the default, because SHOW SLAVE HOSTS is not reliable.
However, the hosts method can work better if the server uses a non-standard port (not
3306). The tool usually does the right thing and finds all replicas, but you may give
a preferred method and it will be used first.
The hosts method requires replicas to be configured with report_host, report_port,
etc.
The dsn method is special: it specifies a table from which other DSN strings are read.
The specified DSN must specify a D and t, or a database-qualified t. The DSN table
should have the following structure:
CREATE TABLE `dsns` (
`id` int(11) NOT NULL AUTO_INCREMENT,
`parent_id` int(11) DEFAULT NULL,
`dsn` varchar(255) NOT NULL,
PRIMARY KEY (`id`)
);
To make the tool monitor only the hosts 10.10.1.16 and 10.10.1.17 for replication lag,
insert the values "h=10.10.1.16" and "h=10.10.1.17" into the table. Currently, the
DSNs are ordered by id, but id and parent_id are otherwise ignored.
--set-vars
type: Array
Set the MySQL variables in this comma-separated list of "variable=value" pairs.
By default, the tool sets:
wait_timeout=10000
innodb_lock_wait_timeout=1
lock_wait_timeout=60
Variables specified on the command line override these defaults. For example,
specifying "--set-vars wait_timeout=500" overrides the default value of 10000.
The tool prints a warning and continues if a variable cannot be set.
--socket
short form: -S; type: string
Socket file to use for connection.
--statistics
Print statistics about internal counters. This is useful to see how many warnings
were suppressed compared to the number of INSERT.
--[no]swap-tables
default: yes
Swap the original table and the new, altered table. This step completes the online
schema change process by making the table with the new schema take the place of the
original table. The original table becomes the "old table," and the tool drops it
unless you disable "--[no]drop-old-table".
--tries
type: array
How many times to try critical operations. If certain operations fail due to non-
fatal, recoverable errors, the tool waits and tries the operation again. These are
the operations that are retried, with their default number of tries and wait time
between tries (in seconds):
OPERATION TRIES WAIT
=================== ===== ====
create_triggers 10 1
drop_triggers 10 1
copy_rows 10 0.25
swap_tables 10 1
update_foreign_keys 10 1
To change the defaults, specify the new values like:
--tries create_triggers:5:0.5,drop_triggers:5:0.5
That makes the tool try "create_triggers" and "drop_triggers" 2 times with a 0.5
second wait between tries. So the format is:
operation:tries:wait[,operation:tries:wait]
All three values must be specified.
Note that most operations are affected only in MySQL 5.5 and newer by
"lock_wait_timeout" (see "--set-vars") because of metadata locks. The "copy_rows"
operation is affected in any version of MySQL by "innodb_lock_wait_timeout".
For creating and dropping triggers, the number of tries applies to each "CREATE
TRIGGER" and "DROP TRIGGER" statement for each trigger. For copying rows, the number
of tries applies to each chunk, not the entire table. For swapping tables, the number
of tries usually applies once because there is usually only one "RENAME TABLE"
statement. For rebuilding foreign key constraints, the number of tries applies to
each statement ("ALTER" statements for the "rebuild_constraints"
"--alter-foreign-keys-method"; other statements for the "drop_swap" method).
The tool retries each operation if these errors occur:
Lock wait timeout (innodb_lock_wait_timeout and lock_wait_timeout)
Deadlock found
Query is killed (KILL QUERY <thread_id>)
Connection is killed (KILL CONNECTION <thread_id>)
Lost connection to MySQL
In the case of lost and killed connections, the tool will automatically reconnect.
Failures and retries are recorded in the "--statistics".
--user
short form: -u; type: string
User for login if not current user.
--version
Show version and exit.
--[no]version-check
default: yes
Check for the latest version of Percona Toolkit, MySQL, and other programs.
This is a standard "check for updates automatically" feature, with two additional
features. First, the tool checks the version of other programs on the local system in
addition to its own version. For example, it checks the version of every MySQL server
it connects to, Perl, and the Perl module DBD::mysql. Second, it checks for and warns
about versions with known problems. For example, MySQL 5.5.25 had a critical bug and
was re-released as 5.5.25a.
Any updates or known problems are printed to STDOUT before the tool's normal output.
This feature should never interfere with the normal operation of the tool.
For more information, visit <https://www.percona.com/version-check>.
PLUGIN
The file specified by "--plugin" must define a class (i.e. a package) called
"pt_online_schema_change_plugin" with a "new()" subroutine. The tool will create an
instance of this class and call any hooks that it defines. No hooks are required, but a
plugin isn't very useful without them.
These hooks, in this order, are called if defined:
init
before_create_new_table
after_create_new_table
before_alter_new_table
after_alter_new_table
before_create_triggers
after_create_triggers
before_copy_rows
after_copy_rows
before_swap_tables
after_swap_tables
before_update_foreign_keys
after_update_foreign_keys
before_drop_old_table
after_drop_old_table
before_drop_triggers
before_exit
Each hook is passed different arguments. To see which arguments are passed to a hook,
search for the hook's name in the tool's source code, like:
# --plugin hook
if ( $plugin && $plugin->can('init') ) {
$plugin->init(
orig_tbl => $orig_tbl,
child_tables => $child_tables,
renamed_cols => $renamed_cols,
slaves => $slaves,
slave_lag_cxns => $slave_lag_cxns,
);
}
The comment "# --plugin hook" precedes every hook call.
Please contact Percona if you have questions or need help.
DSN OPTIONS
These DSN options are used to create a DSN. Each option is given like "option=value".
The options are case-sensitive, so P and p are not the same option. There cannot be
whitespace before or after the "=" and if the value contains whitespace it must be quoted.
DSN options are comma-separated. See the percona-toolkit manpage for full details.
• A
dsn: charset; copy: yes
Default character set.
• D
dsn: database; copy: yes
Database for the old and new table.
• F
dsn: mysql_read_default_file; copy: yes
Only read default options from the given file
• h
dsn: host; copy: yes
Connect to host.
• p
dsn: password; copy: yes
Password to use when connecting.
• P
dsn: port; copy: yes
Port number to use for connection.
• S
dsn: mysql_socket; copy: yes
Socket file to use for connection.
• t
dsn: table; copy: no
Table to alter.
• u
dsn: user; copy: yes
User for login if not current user.
ENVIRONMENT
The environment variable "PTDEBUG" enables verbose debugging output to STDERR. To enable
debugging and capture all output to a file, run the tool like:
PTDEBUG=1 pt-online-schema-change ... > FILE 2>&1
Be careful: debugging output is voluminous and can generate several megabytes of output.
SYSTEM REQUIREMENTS
You need Perl, DBI, DBD::mysql, and some core packages that ought to be installed in any
reasonably new version of Perl.
This tool works only on MySQL 5.0.2 and newer versions, because earlier versions do not
support triggers.
BUGS
For a list of known bugs, see <http://www.percona.com/bugs/pt-online-schema-change>.
Please report bugs at <https://bugs.launchpad.net/percona-toolkit>. Include the following
information in your bug report:
• Complete command-line used to run the tool
• Tool "--version"
• MySQL version of all servers involved
• Output from the tool including STDERR
• Input files (log/dump/config files, etc.)
If possible, include debugging output by running the tool with "PTDEBUG"; see
"ENVIRONMENT".
DOWNLOADING
Visit <http://www.percona.com/software/percona-toolkit/> to download the latest release of
Percona Toolkit. Or, get the latest release from the command line:
wget percona.com/get/percona-toolkit.tar.gz
wget percona.com/get/percona-toolkit.rpm
wget percona.com/get/percona-toolkit.deb
You can also get individual tools from the latest release:
wget percona.com/get/TOOL
Replace "TOOL" with the name of any tool.
AUTHORS
Daniel Nichter and Baron Schwartz
ACKNOWLEDGMENTS
The "online schema change" concept was first implemented by Shlomi Noach in his tool
"oak-online-alter-table", part of <http://code.google.com/p/openarkkit/>. Engineers at
Facebook then built another version called "OnlineSchemaChange.php" as explained by their
blog post: <http://tinyurl.com/32zeb86>. This tool is a hybrid of both approaches, with
additional features and functionality not present in either.
ABOUT PERCONA TOOLKIT
This tool is part of Percona Toolkit, a collection of advanced command-line tools for
MySQL developed by Percona. Percona Toolkit was forked from two projects in June, 2011:
Maatkit and Aspersa. Those projects were created by Baron Schwartz and primarily
developed by him and Daniel Nichter. Visit <http://www.percona.com/software/> to learn
about other free, open-source software from Percona.
COPYRIGHT, LICENSE, AND WARRANTY
This program is copyright 2011-2014 Percona LLC and/or its affiliates.
THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation, version 2; OR
the Perl Artistic License. On UNIX and similar systems, you can issue `man perlgpl' or
`man perlartistic' to read these licenses.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA.
VERSION
pt-online-schema-change 2.2.7