NAME

       rxdebug - Provides debugging trace of Rx activity

SYNOPSIS

       rxdebug -servers <server machine> [-port <IP port>]
           [-nodally] [-allconnections] [-rxstats] [-onlyserver]
           [-onlyclient] [-onlyport <show only port>]
           [-onlyhost <show only host>]
           [-onlyauth <show only auth level>] [-version]
           [-noconns] [-peers] [-help]

       rxdebug -s <server machine> [-po <IP port>] [-nod]
           [-a] [-r] [-onlys] [-onlyc] [-onlyp <show only port>]
           [-onlyh <show only host>] [-onlya <show only auth level>]
           [-v] [-noc] [-pe] [-h]

DESCRIPTION

       The rxdebug command provides a trace of Rx activity for the server or client machine named
       by the -servers argument. Rx is AFS's proprietary remote procedure call (RPC) protocol, so
       this command enables the issuer to check the status of communication between the Cache
       Manager or an AFS server process (as specified with the -port argument) on the machine and
       one or more processes on other machines.

OPTIONS

       -servers <server machine>
           Specifies the machine that is running the Cache Manager or server process for which to
           trace Rx activity. Provide the machine's IP address in dotted decimal format, its
           fully qualified host name (for example, "fs1.abc.com"), or the shortest abbreviated
           form of its host name that distinguishes it from other machines. Successful use of an
           abbreviated form depends on the availability of a name resolution service (such as the
           Domain Name Service or a local host table) at the time the command is issued.

       -port <IP port>
           Specifies the process for which to trace Rx activity. Omit this argument to specify
           the File Server (fileserver process), or provide one of the following values:

           7000 for the File Server (fileserver process)
           7001 for the Cache Manager (specifically, its callback interface)
           7002 for the Protection Server (ptserver process)
           7003 for the Volume Location (VL) Server (vlserver process)
           7004 for the Authentication Server (kaserver process)
           7005 for the Volume Server (volserver process)
           7007 for the BOS Server (bosserver process)
           7008 for the Update Server (upserver process)
           7009 for the NFS/AFS Translator's rmtsysd daemon
           7021 for the Backup Server (buserver process)

           Finally, specify 7025 through 65535 for the Backup Tape Coordinator (butc process)
           that has the port offset number derived by subtracting 7025 from this value.

       -nodally
           Produces output only for connections that are not in dally mode.

       -allconnections
           Produces output for all connections, even inactive ones. By default, the output
           includes information only for connections that are active or in dally mode when the
           rxdebug command is issued.

       -rxstats
           Produces detailed statistics about Rx history and performance (for example, counts of
           the number of packets of various types the process has read and sent, calculations of
           average and minimum roundtrip time, and so on).

       -onlyserver
           Produces output only for connections in which the process designated by the -port
           argument is acting as the server.

       -onlyclient
           Produces output only for connections in which the process designated by the -port
           argument is acting as the client.

       -onlyport <port>
           Produces output only for connections between the process designated by the -port
           argument and the specified port on any another machine. Use the same port identifiers
           as for the -port argument.

       -onlyhost <host>
           Produces output only for connections between the process designated by the -port
           argument and any process on the specified machine. To identify the machine, use the
           same notation as for the -servers argument.

       -onlyauth
           Produces output only for connections that are using the specified authentication
           level. Provide one of the following values:

           auth
               Connections at authentication level rxkad_auth

           clear
               Connections at authentication level rxkad_clear

           crypt
               Connections at authentication level rxkad_crypt

           none
               Unauthenticated connections (equivalents are "null", "noauth", and "unauth")

       -version
           Reports the AFS build level of the binary file for the process designated by the -port
           argument (or of the kernel extensions file for port 7001, the Cache Manager's callback
           interface). Any other options combined with this one are ignored.

       -noconns
           Produces only the standard statistics that begin the output produced by every option
           (other than -version), without reporting on any connections. Any other options
           combined with this one are ignored.

       -peers
           Outputs information from the peer structure maintained for each port on another
           machine to which the process designated by the -port argument has a connection. There
           is information about roundtrip time and numbers of packets sent and received, for
           example.

       -help
           Prints the online help for this command. All other valid options are ignored.

OUTPUT

       If any options other than -version or -help are provided, the output written to the
       standard output stream begins with basic statistics about packet usage and availability,
       how many calls are waiting for a thread, how many threads are free, and so on (this is the
       only information provided by the -noconns flag). Adding other options produces additional
       information as described in OPTIONS. The output is intended for debugging purposes and is
       meaningful to someone familiar with the implementation of Rx.

EXAMPLES

       The following command shows Rx statistics on the server 192.168.1.100:

          % rxdebug  192.168.1.100
          Trying 192.168.1.100 (port 7000):
          Free packets: 265, packet reclaims: 0, calls: 0, used FDs: 34
          not waiting for packets.
          0 calls waiting for a thread
          11 threads are idle
          Done.

       The following command shows the OpenAFS version running on the server 192.168.1.100:

          % rxdebug  192.168.1.100 -version
          Trying 192.168.1.100 (port 7000):
          AFS version:  OpenAFS 1.4.2fc2 built  2006-08-31

PRIVILEGE REQUIRED

       None.

SEE ALSO

       afsd(8), bosserver(8), buserver(8), butc(8), fileserver(8), kaserver(8), ptserver(8),
       upclient(8), upserver(8), vlserver(8), volserver(8)

COPYRIGHT

       IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.

       This documentation is covered by the IBM Public License Version 1.0.  It was converted
       from HTML to POD by software written by Chas Williams and Russ Allbery, based on work by
       Alf Wachsmann and Elizabeth Cassell.