Provided by: wulflogger_2.6.0-0ubuntu2_amd64 
NAME
wulflogger - A logging utility/client for xmlsysd
SYNOPSIS
wulflogger [-h] [-v] [-t display_type] [-d delay] [-c count]
[-f /path/to/wulfhosts] [-l]
WULFLOGGER OPTIONS
-h shows help (command synopsis).
-v makes execution verbose for debugging or the bored.
-t display_type selects display type from list below
-d delay (in seconds) selects update loop delay
-c count causes it to output count pages (only) and exit
-f /path/to/wulfhosts to use a particular wulfhosts file
-l show localhost only (use no wulfhosts file from any location)
DESCRIPTION
wulflogger is a simple yet powerful tty based cluster monitoring tool. It requires
xmlsysd (running on each system to be monitored) to efficiently provide it with system and
proc-derived information that is processed and provided to the user in one of several
user-selectable display formats. With it a user can monitor things across en entire
beowulf, cluster, or workstation LAN systems descriptors such as load average, memory
consumption, swap, page, and interrupt activity and network loads or can even retrieve and
display such mundane information is CPU make and base clock, system time, uptime or other
potentially useful but slowly varying system descriptors. The information presented is
updated regularly after a user-selectable delay. This tool prints cluster results to
stdout, from which they can be redirected into a log file or piped into a tool (for
example, a graphing utility or web application).
WULFHOST
To run wulflogger as anything but a monitor of the local host one REQUIRES a wulfhost
file. wulflogger run with no viable wulfhost file defaults to a localhost connection. A
localhost connection can also be forced (overriding the search for a wulfhost file) with
the -l command line argument.
The wulfhost file tells wulflogger where to to connect to xmlsysd's. It consists of any
mix of the following xml discriptors:
<?xml version="1.0"?>
<wulfstat>
<root/>
<user>rgb</user>
<task>On_spin3d</task>
<host>
<name>ganesh</name>
</host>
<host>
<ip>192.168.1.132</ip>
<port>7887</port>
<host>
<host>
<name>lucifer</name>
<ip>192.168.1.131</ip>
<port>7887</port>
</host>
<hostrange>
<hostfmt>g%02d</hostfmt>
<imin>1</imin>
<imax>15</imax>
<port>7887</port>
</hostrange>
<iprange>
<ipmin>152.3.182.193</ipmin>
<ipmax>152.3.182.200</ipmax>
<port>7887</port>
</iprange>
</wulfstat>
From this example, one sees that the <host></host> tag defines a host to connect to.
Within this tag, the host can be specified by the <name></name> tag (which can contain any
name resolvable by gethostbyname()) or the <ip></ip> tag, most commonly used for hosts in
a cluster that haven't been named. In addition, for each host one can specify a
<port></port> if one for any reason is running the xmlsysd on a different port than its
installation default.
This information can easily be overspecified. In most cases, for example, it is better to
just use the default port (7887) and let local hostname ip address lookup take care of
determining the interface IP number. Note that xml doesn't care how the tags are laid out
as long as they are nested correctly, and that there can be more than one <host>,
<hostrange>, or <iprange> tagset in a wulfhosts to specify the simultaneous monitoring of
any mix of hosts, clusters, lans.
Note also that xml DOES preserve whitespace, so
<host><name>b0 </name></host>
is NOT the same is
<host><name>b0</name></host>
and would likely not work correctly. If you do enter port, name, and ip explicitly and
incorrectly or inconsistently, be prepared for odd behavior.
The <hostrange> is hopefully self explanatory. It can be used to rapidly define an entire
cluster on the basis of a systematic ordering of hostname. The contents of the <hostfmt>
tag should be a SIMPLE printf-format string for a presumed integer that will be iterated
from <imin> to <imax> in steps of one. In this way a single xml tag can define an entire
cluster e.g. g01-g15.
The <iprange> is similar, except that it uses ip number directly in <ipmin> and <ipmax>.
Use caution -- in almost all cases the first three tuples in the ip number should be the
SAME in <ipmin> and <ipmax>. This option is provided in case the hosts don't have a well-
defined and published hostname and are accessible only by e.g. dhcp-assigned ip number in
any event.
All forms of defining a host or list of hosts permit an optional <port> to be assigned to
override xmlsysd's installation default of 7887.
wulflogger will connect to these hosts as fast as it can in a parallel thread, and then
will periodically attempt to REconnect to any hosts that might be down or that might go
down while wulflogger is running. wulflogger itself is thus moderately robust against
cluster node state changes.
Note that any hosts that do not resolve are displayed but marked unknown. Any hosts that
resolve but that cannot accept a connection (which could mean that no daemon is installed
or running, the daemon has more connections than the number permitted in e.g.
/etc/xinetd.d/xmlsysd, or that the host is down) are marked down.
DISPLAY TYPES
The following display types are supported by wulflogger:
0 - load and status only (default), a very useful display for cluster
users
1 - stat -- information and rates primary derived from /proc/stat
2 - memory only (similar to running "free" on each host)
3 - network rates
4 - time displays system clocks, uptime, cpu type and clock
5 - pids interface for monitoring running distributed tasks.
6 - pids interface for monitoring running distributed tasks with
full command line displayed.
The pids interface is a bit quirky. It will generally ignore root-owned tasks, for
example, presuming that the tool is intended to monitor userspace applications. There
exist wulfhosts controls for these properties; eventually they will likely be controllable
at the command line as well.
CRON USAGE
wulflogger can be used in a cron script in a variety of ways. The -c count flag was
introduced to facilitate this usage. For example, one could put wulflogger into the
following sort of pipe:
#!/bin/sh
DOWN=`/usr/bin/wulflogger -f /etc/wulfhosts.cluster1 -t 1 -c 1 \
| grep down | cut -f 1 -d ´ ´`
# now do something about the down hosts...
DEBUGGING
To help debug wulflogger (or problems you might have with wulfhosts), note the table of
verbose/debugging values that is printed as part of its Usage (-h flag). This yields
anything from a simple trace of a particular subsystem such as connect_hosts() to
everything the program does. To limit the output, one can also use the -c count flag to
only display a single cycle. It is a good idea to pipe stderr into a logfile separately
so that the display output is unaltered. The logfile can be examined later or mailed back
to me for analysis.
An example of this might be:
wulflogger -l -c 1 -v 10 2>connect_hosts.log
to trace what wulflogger does connecting to localhost.
SEE ALSO
libwulf(3), wulfstat(1)
PUBLICATION RULES
wulflogger can be modified and used at will by any user, provided that:
a) The original copyright notices are maintained and that the source, including all
modifications, is made publically available at the time of any derived publication. This
is open source software according to the precepts and spirit of the Gnu Public License.
See the accompanying file COPYING, which also must accompany any redistribution.
b) The author of the code (Robert G. Brown) is appropriately acknowledged and referenced
in any derived use or publication.
c) Full responsibility for the accuracy, suitability, and effectiveness of the program
rests with the users and/or modifiers. As is clearly stated in the accompanying
copyright.h:
THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS
BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
THIS SOFTWARE.
ACKNOWLEDGEMENTS
None to speak of now, but a good place to comply with b) above later, if you hack this
code. Well, I should probably acknowledge the essential help of Icon (Konstantin
Raibetsev) and Seth Vidal, the entire beowulf list, and various books on xml, network
programming (e.g. Stevens) and a cast of thousands. So let's assume that I just did;-)
GPL 2b; see the file COPYING that accompanies the source of this program. This is the
"standard Gnu General Public License version 2 or any later version", with the one minor
(humorous) "Beverage" modification listed below. Note that this modification is probably
not legally defensible and can be followed really pretty much according to the honor rule.
As to my personal preferences in beverages, red wine is great, beer is delightful, and
Coca Cola or coffee or tea or even milk acceptable to those who for religious or personal
reasons wish to avoid stressing my liver.
The Beverage Modification to the GPL:
Any satisfied user of this software shall, upon meeting the primary author(s) of this
software for the first time under the appropriate circumstances, offer to buy him or her
or them a beverage. This beverage may or may not be alcoholic, depending on the personal
ethical and moral views of the offerer. The beverage cost need not exceed one U.S. dollar
(although it certainly may at the whim of the offerer:-) and may be accepted or declined
with no further obligation on the part of the offerer. It is not necessary to repeat the
offer after the first meeting, but it can't hurt...