Provided by: libconfig-gitlike-perl_1.12-1_all bug

NAME

       Config::GitLike - git-compatible config file parsing

SYNOPSIS

       This module parses git-style config files, which look like this:

           [core]
               repositoryformatversion = 0
               filemode = true
               bare = false
               logallrefupdates = true
           [remote "origin"]
               url = spang.cc:/srv/git/home.git
               fetch = +refs/heads/*:refs/remotes/origin/*
           [another-section "subsection"]
               key = test
               key = multiple values are OK
               emptyvalue =
               novalue

       Code that uses this config module might look like:

           use Config::GitLike;

           # just load a specific file
           my $data = Config::GitLike->load_file("~/.fooconf");

           # or use the object interface to load /etc/config, ~/.config, and
           # `pwd`/.config
           my $c = Config::GitLike->new(confname => 'config');

           $c->get( key => 'section.name' );
           # make the return value a Perl true/false value
           $c->get( key => 'core.filemode', as => 'bool' );

           # replace the old value
           $c->set(
               key => 'section.name',
               value => 'val1',
               filename => '/home/user/.config',
           );

           # make this key have multiple values rather than replacing the
           # old value
           $c->set(
               key => 'section.name',
               value => 'val2',
               filename => '/home/user/.config',
               multiple => 1,
           );

           # replace all occurrences of the old value for section.name with a new one
           $c->set(
               key => 'section.name',
               value => 'val3',
               filename => '/home/user/.config',
               multiple => 1,
               replace_all => 1,
           );

           # make sure to reload the config files before reading if you've set
           # any variables!
           $c->load;

           # get only the value of 'section.name' that matches '2'
           $c->get( key => 'section.name', filter => '2' );
           $c->get_all( key => 'section.name' );
           # prefixing a search regexp with a ! negates it
           $c->get_regexp( key => '!na' );

           $c->rename_section(
               from => 'section',
               to => 'new-section',
               filename => '/home/user/.config'
           );

           $c->remove_section(
               section => 'section',
               filename => '/home/user/.config'
           );

           # unsets all instances of the given key
           $c->set( key => 'section.name', filename => '/home/user/.config' );

           my %config_vals = $config->dump;
           # string representation of config data
           my $str = $config->dump;
           # prints rather than returning
           $config->dump;

DESCRIPTION

       This module handles interaction with configuration files of the style used by the version
       control system Git. It can both parse and modify these files, as well as create entirely
       new ones.

       You only need to know a few things about the configuration format in order to use this
       module. First, a configuration file is made up of key/value pairs. Every key must be
       contained in a section. Sections can have subsections, but they don't have to. For the
       purposes of setting and getting configuration variables, we join the section name,
       subsection name, and variable name together with dots to get a key name that looks like
       "section.subsection.variable". These are the strings that you'll be passing in to "key"
       arguments.

       Configuration files inherit from each other. By default, "Config::GitLike" loads data from
       a system-wide configuration file, a per-user configuration file, and a per-directory
       configuration file, but by subclassing and overriding methods you can obtain any
       combination of configuration files. By default, configuration files that don't exist are
       just skipped.

       See <http://www.kernel.org/pub/software/scm/git/docs/git-config.html#_configuration_file>
       for details on the syntax of git configuration files. We won't waste pixels on the nitty
       gritty here.

       While the behavior of a couple of this module's methods differ slightly from the "git
       config" equivalents, this module can read any config file written by git. The converse is
       usually true, but only if you don't take advantage of this module's increased
       permissiveness when it comes to key names. (See "DIFFERENCES FROM GIT-CONFIG" for
       details.)

       This is an object-oriented module using Moo. All subroutines are object method calls.

       A few methods have parameters that are always used for the same purpose:

   Filenames
       All methods that change things in a configuration file require a filename to write to, via
       the "filename" parameter. Since a "Config::GitLike" object can be working with multiple
       config files that inherit from each other, we don't try to figure out which one to write
       to automatically and let you specify instead.

   Casting
       All get and set methods can make sure the values they're returning or setting are valid
       values of a certain type: "bool", "int", "num", or "bool-or-int" (or at least as close as
       Perl can get to having these types). Do this by passing one of these types in via the "as"
       parameter. The set method, if told to write bools, will always write "true" or "false"
       (not anything else that "cast" considers a valid bool).

       Methods that are told to cast values will throw exceptions if the values they're trying to
       cast aren't valid values of the given type.

       See the "cast" method documentation for more on what is considered valid for each type.

   Filtering
       All get and set methods can filter what values they return via their "filter" parameter,
       which is expected to be a string that is a valid regex. If you want to filter items OUT
       instead of IN, you can prefix your regex with a ! and that will do the trick.

       Now, on the the methods!

MAIN METHODS

       There are the methods you're likely to use the most.

   new( confname => 'config', encoding => 'UTF-8' )
       Create a new configuration object with the base config name "confname".  If you are
       interested simply in loading one specific file, and not in automatically loading a global
       file, a per-user file, and a per-directory file, see "load_file", below.

       "confname" is used to construct the filenames that will be loaded; by default, these are
       "/etc/confname" (global configuration file), "~/.confname" (user configuration file), and
       "<Cwd"/.confname> (directory configuration file).

       You can override these defaults by subclassing "Config::GitLike" and overriding the
       methods "global_file", "user_file", and "dir_file". (See "METHODS YOU MAY WISH TO
       OVERRIDE" for details.)

       If you wish to enforce only being able to read/write config files that git can read or
       write, pass in "compatible => 1" to this constructor. The default rules for some
       components of the config file are more permissive than git's (see "DIFFERENCES FROM GIT-
       CONFIG").

       If you know that your Git config files are encoded with a known character encoding, pass
       in "encoding => $encoding" to specify the name of the encoding. Config::GitLike will then
       properly serialize and deserialize the files with that encoding.  Note that configutation
       files written with "git config" are usually, but are not required to be, in UTF-8.

   confname
       The configuration filename that you passed in when you created the "Config::GitLike"
       object. You can change it if you want by passing in a new name (and then reloading via
       "load").

   load
       This method is usually called implicitly on the first "get", "get_all", "get_regex", or
       "dump" call used, and is only necessary if you want to explicitly reload the data.

       Load the global, local, and directory configuration file with the filename "confname"(if
       they exist). Configuration variables loaded later override those loaded earlier, so
       variables from the directory configuration file have the highest precedence.

       Pass in an optional path, and it will be passed on to "load_dirs" (which loads the
       directory configuration file(s)).

       Returns a hash copy of all loaded configuration data stored in the module after the files
       have been loaded, or a hashref to this hash in scalar context.

   config_files
       An array reference containing the absolute filenames of all config files that are
       currently loaded, in the order they were loaded.

   get
       Parameters:

           key => 'sect.subsect.key'
           as => 'int'
           human => 1
           filter => '!foo'

       Return the config value associated with "key" cast as an "as".

       The "key" option is required (will return undef if unspecified); the "as" amd "human"
       options are not (see cast for their meaning). Sections and subsections are specified in
       the key by separating them from the key name with a "." character. Sections, subsections,
       and keys may all be quoted (double or single quotes).

       If "key" doesn't exist in the config, or has no values which match the filter, undef is
       returned. Dies with the exception "Multiple values" if the given key has more than one
       value associated with it which match the filter. (Use "get_all" to retrieve multiple
       values.)

       Calls "load" if it hasn't been done already. Note that if you've run any "set" calls to
       the loaded configuration files since the last time they were loaded, you MUST call "load"
       again before getting, or the returned configuration data may not match the configuration
       variables on-disk.

   get_all
       Parameters:

           key => 'section.sub'
           as => 'int'
           human => 1
           filter => 'regex'

       Like "get" but does not fail if the number of values for the key is not exactly one.

       Returns a list of values (or an arrayref in scalar context).

   get_regexp
       Parameters:

           key => 'regex'
           as => 'bool'
           human => 1
           filter => 'regex'

       Similar to "get_all" but searches for values based on a key regex.

       Returns a hash of name/value pairs (or a hashref in scalar context).

   dump
       In scalar context, return a string containing all configuration data, sorted in ASCII
       order, in the form:

           section.key=value
           section2.key=value

       If called in void context, this string is printed instead.

       In list context, returns a hash containing all the configuration data.

   set
       Parameters:

           key => 'section.name'
           value => 'bar'
           filename => File::Spec->catfile(qw/home user/, '.'.$config->confname)
           filter => 'regex'
           as => 'bool'
           multiple => 1
           replace_all => 1

       Set the key "foo" in the configuration section "section" to the value "bar" in the given
       filename.

       Replace "key"'s value if "key" already exists.

       To unset a key, pass in "key" but not "value".

       Returns true on success.

       If you need to have a . character in your variable name, you can surround the name with
       quotes (single or double): "key =&gt 'section."foo.bar.com"'" Don't do this unless you
       really have to.

       multiple values

       By default, set will replace the old value rather than giving a key multiple values. To
       override this, pass in "multiple => 1". If you want to replace all instances of a
       multiple-valued key with a new value, you need to pass in "replace_all => 1" as well.

   group_set( $filename, $array_ref )
       Same as "set", but set a group of variables at the same time without writing to disk
       separately for each.

       $array_ref contains a list of hash references which are essentially hashes of arguments to
       "set", excluding the $filename argument since that is specified separately and the same
       file is used for all variables to be set at once.

   rename_section
       Parameters:

           from => 'name.subname'
           to => 'new.subname'
           filename => '/file/to/edit'

       Rename the section existing in "filename" given by "from" to the section given by "to".

       Throws an exception "No such section" if the section in "from" doesn't exist in
       "filename".

       If no value is given for "to", the section is removed instead of renamed.

       Returns true on success, false if "filename" didn't exist and thus the rename did nothing.

   remove_section
       Parameters:

           section => 'section.subsection'
           filename => '/file/to/edit'

       Just a convenience wrapper around "rename_section" for readability's sake.  Removes the
       given section (which you can do by renaming to nothing as well).

   add_comment
       Parameters:

            comment   => "Begin editing here\n and then stop",
            filename  => '/file/to/edit'
            indented  => 1,
            semicolon => 0,

       Add a comment to the specified configuration file. The "comment" and "filename" parameters
       are required. Comments will be added to the file with "# " at the begnning of each line of
       the comment. Pass a true value to "semicolon" if you'd rather they start with "; ". If
       your comments are indented with leading white space, and you want that white space to
       appear in front of the comment character, rather than after, pass a true value to
       "indented".

   cascade( $bool )
       Gets or sets if only the deepest configuration file in a directory tree is loaded, or if
       all of them are loaded, shallowest to deepest.  Alternately, "cascade => 1" can be passed
       to "new".

   origins
       Returns a hash mapping each config key with the file it was loaded from.

METHODS YOU MAY WISH TO OVERRIDE

       If your application's configuration layout is different from the default, e.g.  if its
       home directory config files are in a directory within the home directory (like
       "~/.git/config") instead of just dot-prefixed, override these methods to return the right
       directory names. For fancier things like altering precedence, you'll need to override
       "load" as well.

   dir_file
       Return a string containing the path to a configuration file with the name "confname" in a
       directory. The directory isn't specified here.

   global_file
       Return the string "/etc/confname", the absolute name of the system-wide configuration file
       with name "confname".

   user_file
       Return a string containing the path to a configuration file in the current user's home
       directory with filename "confname".

   load_dirs
       Parameters:

           '/path/to/look/in/'

       Load the configuration file with the filename "dir_file" in the current working directory
       into the memory or, if there is no config matching "dir_file" in the current working
       directory, walk up the directory tree until one is found. (No error is thrown if none is
       found.) If an optional path is passed in, that directory will be used as the base
       directory instead of the working directory.

       You'll want to use "load_file" to load config files from your overridden version of this
       subroutine.

       Returns nothing of note.

OTHER METHODS

       These are mostly used internally in other methods, but could be useful anyway.

   load_global
       If a global configuration file with the absolute name given by "global_file" exists, load
       its configuration variables into memory.

       Returns the current contents of all the loaded configuration variables after the file has
       been loaded, or undef if no global config file is found.

   load_user
       If a configuration file with the absolute name given by "user_file" exists, load its
       config variables into memory.

       Returns the current contents of all the loaded configuration variables after the file has
       been loaded, or undef if no user config file is found.

   load_file( $filename )
       Takes a string containing the path to a file, opens it if it exists, loads its config
       variables into memory, and returns the currently loaded config variables (a hashref).

       This method can also be called as a class method, which will die if the file cannot be
       read.  If called as an instance method, returns undef on failure.

   parse_content
       Parameters:

           content => 'str'
           callback => sub {}
           error => sub {}

       Parses the given content and runs callbacks as it finds valid information.

       Returns undef on success and "error($content)" (the original content) on failure.

       "callback" is called like:

           callback(section => $str, offset => $num, length => $num, name => $str, value => $str)

       "name" and "value" may be omitted if the callback is not being called on a key/value pair,
       or if it is being called on a key with no value.

       "error" is called like:

           error( content => $content, offset => $offset )

       Where "offset" is the point in the content where the parse error occurred.

       If you need to use this method, you might be interested in "error_callback" as well.

   error_callback
       Parameters:

           content => 'str'
           offset => 45
           filename => '/foo/bar/.baz'

       Made especially for passing to "parse_content", passed through the "error" parameter like
       this:

           error => sub {
               error_callback( @_, filename => '/file/you/were/parsing' )
           }

       It's used internally wherever "parse_content" is used and will throw an exception with a
       useful message detailing the line number, position on the line, and contents of the bad
       line; if you find the need to use "parse_content" elsewhere, you may find it useful as
       well.

   set_multiple( $name )
       Mark the key string $name as containing multiple values.

       Returns nothing.

   is_multiple( $name )
       Return a true value if the key string $name contains multiple values; false otherwise.

   define
       Parameters:

           section => 'str'
           name => 'str'
           value => 'str'

       Given a section, a key name, and a valueX store this information in memory in the config
       object.

       Returns the value that was just defined on success, or undef if no name and section were
       given and thus the key cannot be defined.

   cast
       Parameters:

           value => 'foo'
           as => 'int'
           human => 1

       Return "value" cast into the type specified by "as".

       Valid values for "as" are "bool", "int", "num", or "bool-or-num". For "bool", "true",
       "yes", "on", 1, and undef are translated into a true value (for Perl); anything else is
       false. Specifying a true value for the "human" argument will get you a human-readable
       'true' or 'false' rather than a value that plays along with Perl's definition of
       truthiness (0 or 1).

       For "int"s and "num"s, if "value" ends in "k", "m", or "g", it will be multiplied by 1024,
       1048576, and 1073741824, respectively, before being returned. "int"s are truncated after
       being multiplied, if they have a decimal portion.

       "bool-or-int", as you might have guessed, gives you either a bool or an int depending on
       which one applies.

       If "as" is unspecified, "value" is returned unchanged.

   format_section
       Parameters:

           section => 'section.subsection'
           base => 1

       Return a string containing the section/subsection header, formatted as it should appear in
       a config file. If "bare" is true, the returned value is not followed be a newline.

   format_definition
       Parameters:

           key => 'str'
           value => 'str'
           bare => 1

       Return a string containing the key/value pair as they should be printed in the config
       file. If "bare" is true, the returned value is not tab-indented nor followed by a newline.

   canonical_case( $name )
       Given a full key name, returns the canonical name of the key; this is the key with the
       section and name lower-cased; the subsection is left as-is.

   original_key( $name )
       Given a full key name, returns the key as it was last loaded from the file, retaining what
       ever upper/lower case was used.  Note that for multiple-valued keys, this returns an array
       reference of key names, as each definition may have been provided in a different choice of
       case.

DIFFERENCES FROM GIT-CONFIG

       This module does the following things differently from git-config:

       We are much more permissive about valid key names and section names.  For variables,
       instead of limiting variable names to alphanumeric characters and -, we allow any
       characters except for = and newlines, including spaces as long as they are not leading or
       trailing, and . as long as the key name is quoted. For sections, any characters but
       whitespace, [], and " are allowed.  You can enforce reading/writing only git-compatible
       variable names and section headers by passing "compatible => 1" to the constructor.

       When replacing variable values and renaming sections, we merely use a substring
       replacement rather than writing out new lines formatted in the default manner for new
       lines. Git's replacement/renaming (as of 1.6.3.2) is currently buggy and loses trailing
       comments and variables that are defined on the same line as a section being renamed. Our
       method preserves original formatting and surrounding information.

       We also allow the 'num' type for casting, since in many cases we might want to be more
       lenient on numbers.

       We truncate decimal numbers that are cast to "int"s, whereas Git just rejects them.

       We don't support NUL-terminating output (the --null flag to git-config). Who needs it?

BUGS

       If you find any bugs in this module, report them at:

         http://rt.cpan.org/

       Include the version of the module you're using and any relevant problematic configuration
       files or code snippets.

SEE ALSO

       <http://www.kernel.org/pub/software/scm/git/docs/git-config.html#_configuration_file>,
       Config::GitLike::Git, <http://syncwith.us/> ("Config::GitLike" is used in Prophet/SD and
       provides a working example)

LICENSE

       This program is free software; you may modify and/or redistribute it under the same terms
       as Perl itself.

COPYRIGHT

       Copyright 2010 Best Practical Solutions, LLC

AUTHORS

       Alex Vandiver <alexmv@bestpractical.com>, Christine Spang <spang@bestpractical.com>

POD ERRORS

       Hey! The above document had some coding errors, which are explained below:

       Around line 1726:
           Non-ASCII character seen before =encoding in 'valueX'. Assuming UTF-8