Provided by: libconfig-model-lcdproc-perl_2.041-2_all bug

NAME

       Config::Model::models::LCDd::hd44780 - Configuration class LCDd::hd44780

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   Backlight
       If you have a switchable backlight.Optional. Type uniline. default: 'no'.

   Brightness
       Set brightness of the backlight (lcd2usb and usb4all): Brightness is the brightness while
       the backlight is set to 'on'.Optional. Type integer. upstream_default: '800'.

   CharMap
       Character map to to map ISO-8859-1 to the LCD's character set

       (hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5 and upd16314 are possible if compiled with
       additional charmaps)Optional. Type enum. choice: 'hd44780_default', 'hd44780_euro',
       'ea_ks0073', 'sed1278f_0b', 'hd44780_koi8_r', 'hd44780_cp1251', 'hd44780_8859_5',
       'upd16314'. upstream_default: 'hd44780_default'.

   ConnectionType
       Select what type of connection. See documentation for types.Optional. Type uniline.
       default: '4bit'.

   Contrast
       Set the initial contrast (bwctusb, lcd2usb, and usb4all)Optional. Type integer.
       upstream_default: '800'.

   DelayBus
       You can reduce the inserted delays by setting this to false.  On fast PCs it is possible
       your LCD does not respond correctly.  Default: true.Optional. Type uniline. default:
       'true'.

   DelayMult
       If your display is slow and cannot keep up with the flow of data from LCDd, garbage can
       appear on the LCDd. Set this delay factor to 2 or 4 to increase the delays. Default:
       1.Optional. Type uniline. upstream_default: '2'.

   Device
       Device of the serial interface Optional. Type uniline. upstream_default: '/dev/lcd'.

   ExtendedMode
       If you have an HD66712, a KS0073 or another 'almost HD44780-compatible', set this flag to
       get into extended mode (4-line linear).Optional. Type uniline. upstream_default: 'yes'.

   KeepAliveDisplay
       Some displays (e.g. vdr-wakeup) need a message from the driver to that it is still alive.
       When set to a value bigger then null the character in the upper left corner is updated
       every <KeepAliveDisplay> seconds. Default: 0.Optional. Type uniline. upstream_default:
       '0'.

   KeyMatrix_4_1
       If you have a keypad you can assign keystrings to the keys.  See documentation for used
       terms and how to wire it.  For example to give directly connected key 4 the string
       "Enter", use:
         KeyDirect_4=Enter For matrix keys use the X and Y coordinates of the key:
         KeyMatrix_1_3=Enter. Optional. Type uniline. default: 'Enter'.

   KeyMatrix_4_2
       Optional. Type uniline. default: 'Up'.

   KeyMatrix_4_3
       Optional. Type uniline. default: 'Down'.

   KeyMatrix_4_4
       Optional. Type uniline. default: 'Escape'.

   Keypad
       If you have a keypad connected.  You may also need to configure the keypad layout further
       on in this file.Optional. Type uniline. default: 'no'.

   Lastline
       Specifies if the last line is pixel addressable (yes) or it controls an underline effect
       (no). Optional. Type boolean. upstream_default: 'yes'.

   LineAddress
       In extended mode, on some controllers like the ST7036 (in 3 line mode) the next line in
       DDRAM won't start 0x20 higher. Optional. Type uniline. upstream_default: '0x20'.

   OffBrightness
       OffBrightness is the brightness while the backlight is set to 'off'.Optional. Type
       integer. upstream_default: '300'.

   OutputPort
       If you have the additional output port ("bargraph") and you want to be able to control it
       with the lcdproc OUTPUT command. Optional. Type uniline. default: 'no'.

   Port
       Port where the LPT is. Usual value are: 0x278, 0x378 and 0x3BC. Optional. Type uniline.
       default: '0x378'.

   RefreshDisplay
       If you experience occasional garbage on your display you can use this option as
       workaround. If set to a value bigger than null it forces a full screen refresh
       <RefreshDiplay> seconds. Default: 0.Optional. Type uniline. upstream_default: '5'.

   Size
       Specifies the size of the LCD.  In case of multiple combined displays, this should be the
       total size.Optional. Type uniline. default: '20x4'.

   Speed
       Bitrate of the serial port (0 for interface default)Optional. Type uniline. default: '0'.

   vspan
       For multiple combined displays: how many lines does each display have.  Vspan=2,2 means
       both displays have 2 lines.Optional. Type uniline. upstream_default: '2,2'.

SEE ALSO

       •   cme