Provided by: libio-compress-perl_2.063-1_all bug

NAME

       IO::Compress::Zip - Write zip files/buffers

SYNOPSIS

           use IO::Compress::Zip qw(zip $ZipError) ;

           my $status = zip $input => $output [,OPTS]
               or die "zip failed: $ZipError\n";

           my $z = new IO::Compress::Zip $output [,OPTS]
               or die "zip failed: $ZipError\n";

           $z->print($string);
           $z->printf($format, $string);
           $z->write($string);
           $z->syswrite($string [, $length, $offset]);
           $z->flush();
           $z->tell();
           $z->eof();
           $z->seek($position, $whence);
           $z->binmode();
           $z->fileno();
           $z->opened();
           $z->autoflush();
           $z->input_line_number();
           $z->newStream( [OPTS] );

           $z->deflateParams();

           $z->close() ;

           $ZipError ;

           # IO::File mode

           print $z $string;
           printf $z $format, $string;
           tell $z
           eof $z
           seek $z, $position, $whence
           binmode $z
           fileno $z
           close $z ;

DESCRIPTION

       This module provides a Perl interface that allows writing zip compressed data to files or
       buffer.

       The primary purpose of this module is to provide streaming write access to zip files and
       buffers. It is not a general-purpose file archiver. If that is what you want, check out
       "Archive::Zip".

       At present three compression methods are supported by IO::Compress::Zip, namely Store (no
       compression at all), Deflate, Bzip2 and LZMA.

       Note that to create Bzip2 content, the module "IO::Compress::Bzip2" must be installed.

       Note that to create LZMA content, the module "IO::Compress::Lzma" must be installed.

       For reading zip files/buffers, see the companion module IO::Uncompress::Unzip.

Functional Interface

       A top-level function, "zip", is provided to carry out "one-shot" compression between
       buffers and/or files. For finer control over the compression process, see the "OO
       Interface" section.

           use IO::Compress::Zip qw(zip $ZipError) ;

           zip $input_filename_or_reference => $output_filename_or_reference [,OPTS]
               or die "zip failed: $ZipError\n";

       The functional interface needs Perl5.005 or better.

   zip $input_filename_or_reference => $output_filename_or_reference [, OPTS]
       "zip" expects at least two parameters, $input_filename_or_reference and
       $output_filename_or_reference.

       The $input_filename_or_reference parameter

       The parameter, $input_filename_or_reference, is used to define the source of the
       uncompressed data.

       It can take one of the following forms:

       A filename
            If the <$input_filename_or_reference> parameter is a simple scalar, it is assumed to
            be a filename. This file will be opened for reading and the input data will be read
            from it.

       A filehandle
            If the $input_filename_or_reference parameter is a filehandle, the input data will be
            read from it.  The string '-' can be used as an alias for standard input.

       A scalar reference
            If $input_filename_or_reference is a scalar reference, the input data will be read
            from $$input_filename_or_reference.

       An array reference
            If $input_filename_or_reference is an array reference, each element in the array must
            be a filename.

            The input data will be read from each file in turn.

            The complete array will be walked to ensure that it only contains valid filenames
            before any data is compressed.

       An Input FileGlob string
            If $input_filename_or_reference is a string that is delimited by the characters "<"
            and ">" "zip" will assume that it is an input fileglob string. The input is the list
            of files that match the fileglob.

            See File::GlobMapper for more details.

       If the $input_filename_or_reference parameter is any other type, "undef" will be returned.

       In addition, if $input_filename_or_reference is a simple filename, the default values for
       the "Name", "Time", "TextFlag", "ExtAttr", "exUnixN" and "exTime" options will be sourced
       from that file.

       If you do not want to use these defaults they can be overridden by explicitly setting the
       "Name", "Time", "TextFlag", "ExtAttr", "exUnixN" and "exTime" options or by setting the
       "Minimal" parameter.

       The $output_filename_or_reference parameter

       The parameter $output_filename_or_reference is used to control the destination of the
       compressed data. This parameter can take one of these forms.

       A filename
            If the $output_filename_or_reference parameter is a simple scalar, it is assumed to
            be a filename.  This file will be opened for writing and the compressed data will be
            written to it.

       A filehandle
            If the $output_filename_or_reference parameter is a filehandle, the compressed data
            will be written to it.  The string '-' can be used as an alias for standard output.

       A scalar reference
            If $output_filename_or_reference is a scalar reference, the compressed data will be
            stored in $$output_filename_or_reference.

       An Array Reference
            If $output_filename_or_reference is an array reference, the compressed data will be
            pushed onto the array.

       An Output FileGlob
            If $output_filename_or_reference is a string that is delimited by the characters "<"
            and ">" "zip" will assume that it is an output fileglob string. The output is the
            list of files that match the fileglob.

            When $output_filename_or_reference is an fileglob string,
            $input_filename_or_reference must also be a fileglob string. Anything else is an
            error.

            See File::GlobMapper for more details.

       If the $output_filename_or_reference parameter is any other type, "undef" will be
       returned.

   Notes
       When $input_filename_or_reference maps to multiple files/buffers and
       $output_filename_or_reference is a single file/buffer the input files/buffers will each be
       stored in $output_filename_or_reference as a distinct entry.

   Optional Parameters
       Unless specified below, the optional parameters for "zip", "OPTS", are the same as those
       used with the OO interface defined in the "Constructor Options" section below.

       "AutoClose => 0|1"
            This option applies to any input or output data streams to "zip" that are
            filehandles.

            If "AutoClose" is specified, and the value is true, it will result in all input
            and/or output filehandles being closed once "zip" has completed.

            This parameter defaults to 0.

       "BinModeIn => 0|1"
            When reading from a file or filehandle, set "binmode" before reading.

            Defaults to 0.

       "Append => 0|1"
            The behaviour of this option is dependent on the type of output data stream.

            ·    A Buffer

                 If "Append" is enabled, all compressed data will be append to the end of the
                 output buffer. Otherwise the output buffer will be cleared before any compressed
                 data is written to it.

            ·    A Filename

                 If "Append" is enabled, the file will be opened in append mode. Otherwise the
                 contents of the file, if any, will be truncated before any compressed data is
                 written to it.

            ·    A Filehandle

                 If "Append" is enabled, the filehandle will be positioned to the end of the file
                 via a call to "seek" before any compressed data is written to it.  Otherwise the
                 file pointer will not be moved.

            When "Append" is specified, and set to true, it will append all compressed data to
            the output data stream.

            So when the output is a filehandle it will carry out a seek to the eof before writing
            any compressed data. If the output is a filename, it will be opened for appending. If
            the output is a buffer, all compressed data will be appended to the existing buffer.

            Conversely when "Append" is not specified, or it is present and is set to false, it
            will operate as follows.

            When the output is a filename, it will truncate the contents of the file before
            writing any compressed data. If the output is a filehandle its position will not be
            changed. If the output is a buffer, it will be wiped before any compressed data is
            output.

            Defaults to 0.

   Examples
       To read the contents of the file "file1.txt" and write the compressed data to the file
       "file1.txt.zip".

           use strict ;
           use warnings ;
           use IO::Compress::Zip qw(zip $ZipError) ;

           my $input = "file1.txt";
           zip $input => "$input.zip"
               or die "zip failed: $ZipError\n";

       To read from an existing Perl filehandle, $input, and write the compressed data to a
       buffer, $buffer.

           use strict ;
           use warnings ;
           use IO::Compress::Zip qw(zip $ZipError) ;
           use IO::File ;

           my $input = new IO::File "<file1.txt"
               or die "Cannot open 'file1.txt': $!\n" ;
           my $buffer ;
           zip $input => \$buffer
               or die "zip failed: $ZipError\n";

       To create a zip file, "output.zip", that contains the compressed contents of the files
       "alpha.txt" and "beta.txt"

           use strict ;
           use warnings ;
           use IO::Compress::Zip qw(zip $ZipError) ;

           zip [ 'alpha.txt', 'beta.txt' ] => 'output.zip'
               or die "zip failed: $ZipError\n";

       Alternatively, rather than having to explicitly name each of the files that you want to
       compress, you could use a fileglob to select all the "txt" files in the current directory,
       as follows

           use strict ;
           use warnings ;
           use IO::Compress::Zip qw(zip $ZipError) ;

           my @files = <*.txt>;
           zip \@files => 'output.zip'
               or die "zip failed: $ZipError\n";

       or more succinctly

           zip [ <*.txt> ] => 'output.zip'
               or die "zip failed: $ZipError\n";

OO Interface

   Constructor
       The format of the constructor for "IO::Compress::Zip" is shown below

           my $z = new IO::Compress::Zip $output [,OPTS]
               or die "IO::Compress::Zip failed: $ZipError\n";

       It returns an "IO::Compress::Zip" object on success and undef on failure.  The variable
       $ZipError will contain an error message on failure.

       If you are running Perl 5.005 or better the object, $z, returned from IO::Compress::Zip
       can be used exactly like an IO::File filehandle.  This means that all normal output file
       operations can be carried out with $z.  For example, to write to a compressed file/buffer
       you can use either of these forms

           $z->print("hello world\n");
           print $z "hello world\n";

       The mandatory parameter $output is used to control the destination of the compressed data.
       This parameter can take one of these forms.

       A filename
            If the $output parameter is a simple scalar, it is assumed to be a filename. This
            file will be opened for writing and the compressed data will be written to it.

       A filehandle
            If the $output parameter is a filehandle, the compressed data will be written to it.
            The string '-' can be used as an alias for standard output.

       A scalar reference
            If $output is a scalar reference, the compressed data will be stored in $$output.

       If the $output parameter is any other type, "IO::Compress::Zip"::new will return undef.

   Constructor Options
       "OPTS" is any combination of the following options:

       "AutoClose => 0|1"
            This option is only valid when the $output parameter is a filehandle. If specified,
            and the value is true, it will result in the $output being closed once either the
            "close" method is called or the "IO::Compress::Zip" object is destroyed.

            This parameter defaults to 0.

       "Append => 0|1"
            Opens $output in append mode.

            The behaviour of this option is dependent on the type of $output.

            ·    A Buffer

                 If $output is a buffer and "Append" is enabled, all compressed data will be
                 append to the end of $output. Otherwise $output will be cleared before any data
                 is written to it.

            ·    A Filename

                 If $output is a filename and "Append" is enabled, the file will be opened in
                 append mode. Otherwise the contents of the file, if any, will be truncated
                 before any compressed data is written to it.

            ·    A Filehandle

                 If $output is a filehandle, the file pointer will be positioned to the end of
                 the file via a call to "seek" before any compressed data is written to it.
                 Otherwise the file pointer will not be moved.

            This parameter defaults to 0.

       "Name => $string"
            Stores the contents of $string in the zip filename header field.

            If "Name" is not specified and the $input parameter is a filename, the value of
            $input will be used for the zip filename header field.

            If "Name" is not specified and the $input parameter is not a filename, no zip
            filename field will be created.

            Note that both the "CanonicalName" and "FilterName" options can modify the value used
            for the zip filename header field.

       "CanonicalName => 0|1"
            This option controls whether the filename field in the zip header is normalized into
            Unix format before being written to the zip file.

            It is recommended that you enable this option unless you really need to create a non-
            standard Zip file.

            This is what APPNOTE.TXT has to say on what should be stored in the zip filename
            header field.

                The name of the file, with optional relative path.
                The path stored should not contain a drive or
                device letter, or a leading slash.  All slashes
                should be forward slashes '/' as opposed to
                backwards slashes '\' for compatibility with Amiga
                and UNIX file systems etc.

            This option defaults to false.

       "FilterName => sub { ... }"
            This option allow the filename field in the zip header to be modified before it is
            written to the zip file.

            This option takes a parameter that must be a reference to a sub.  On entry to the sub
            the $_ variable will contain the name to be filtered. If no filename is available $_
            will contain an empty string.

            The value of $_ when the sub returns will be  stored in the filename header field.

            Note that if "CanonicalName" is enabled, a normalized filename will be passed to the
            sub.

            If you use "FilterName" to modify the filename, it is your responsibility to keep the
            filename in Unix format.

            Although this option can be used with the OO interface, it is of most use with the
            one-shot interface. For example, the code below shows how "FilterName" can be used to
            remove the path component from a series of filenames before they are stored in
            $zipfile.

                sub compressTxtFiles
                {
                    my $zipfile = shift ;
                    my $dir     = shift ;

                    zip [ <$dir/*.txt> ] => $zipfile,
                        FilterName => sub { s[^$dir/][] } ;
                }

       "Time => $number"
            Sets the last modified time field in the zip header to $number.

            This field defaults to the time the "IO::Compress::Zip" object was created if this
            option is not specified and the $input parameter is not a filename.

       "ExtAttr => $attr"
            This option controls the "external file attributes" field in the central header of
            the zip file. This is a 4 byte field.

            If you are running a Unix derivative this value defaults to

                0100644 << 16

            This should allow read/write access to any files that are extracted from the zip
            file/buffer`.

            For all other systems it defaults to 0.

       "exTime => [$atime, $mtime, $ctime]"
            This option expects an array reference with exactly three elements: $atime, "mtime"
            and $ctime. These correspond to the last access time, last modification time and
            creation time respectively.

            It uses these values to set the extended timestamp field (ID is "UT") in the local
            zip header using the three values, $atime, $mtime, $ctime. In addition it sets the
            extended timestamp field in the central zip header using $mtime.

            If any of the three values is "undef" that time value will not be used.  So, for
            example, to set only the $mtime you would use this

                exTime => [undef, $mtime, undef]

            If the "Minimal" option is set to true, this option will be ignored.

            By default no extended time field is created.

       "exUnix2 => [$uid, $gid]"
            This option expects an array reference with exactly two elements: $uid and $gid.
            These values correspond to the numeric User ID (UID) and Group ID (GID) of the owner
            of the files respectively.

            When the "exUnix2" option is present it will trigger the creation of a Unix2 extra
            field (ID is "Ux") in the local zip header. This will be populated with $uid and
            $gid. An empty Unix2 extra field will also be created in the central zip header.

            Note - The UID & GID are stored as 16-bit integers in the "Ux" field. Use "exUnixN"
            if your UID or GID are 32-bit.

            If the "Minimal" option is set to true, this option will be ignored.

            By default no Unix2 extra field is created.

       "exUnixN => [$uid, $gid]"
            This option expects an array reference with exactly two elements: $uid and $gid.
            These values correspond to the numeric User ID (UID) and Group ID (GID) of the owner
            of the files respectively.

            When the "exUnixN" option is present it will trigger the creation of a UnixN extra
            field (ID is "ux") in both the local and central zip headers.  This will be populated
            with $uid and $gid.  The UID & GID are stored as 32-bit integers.

            If the "Minimal" option is set to true, this option will be ignored.

            By default no UnixN extra field is created.

       "Comment => $comment"
            Stores the contents of $comment in the Central File Header of the zip file.

            By default, no comment field is written to the zip file.

       "ZipComment => $comment"
            Stores the contents of $comment in the End of Central Directory record of the zip
            file.

            By default, no comment field is written to the zip file.

       "Method => $method"
            Controls which compression method is used. At present four compression methods are
            supported, namely Store (no compression at all), Deflate, Bzip2 and Lzma.

            The symbols, ZIP_CM_STORE, ZIP_CM_DEFLATE, ZIP_CM_BZIP2 and ZIP_CM_LZMA are used to
            select the compression method.

            These constants are not imported by "IO::Compress::Zip" by default.

                use IO::Compress::Zip qw(:zip_method);
                use IO::Compress::Zip qw(:constants);
                use IO::Compress::Zip qw(:all);

            Note that to create Bzip2 content, the module "IO::Compress::Bzip2" must be
            installed. A fatal error will be thrown if you attempt to create Bzip2 content when
            "IO::Compress::Bzip2" is not available.

            Note that to create Lzma content, the module "IO::Compress::Lzma" must be installed.
            A fatal error will be thrown if you attempt to create Lzma content when
            "IO::Compress::Lzma" is not available.

            The default method is ZIP_CM_DEFLATE.

       "Stream => 0|1"
            This option controls whether the zip file/buffer output is created in streaming mode.

            Note that when outputting to a file with streaming mode disabled ("Stream" is 0), the
            output file must be seekable.

            The default is 1.

       "Zip64 => 0|1"
            Create a Zip64 zip file/buffer. This option is used if you want to store files larger
            than 4 Gig or store more than 64K files in a single zip archive..

            "Zip64" will be automatically set, as needed, if working with the one-shot interface
            when the input is either a filename or a scalar reference.

            If you intend to manipulate the Zip64 zip files created with this module using an
            external zip/unzip, make sure that it supports Zip64.

            In particular, if you are using Info-Zip you need to have zip version 3.x or better
            to update a Zip64 archive and unzip version 6.x to read a zip64 archive.

            The default is 0.

       "TextFlag => 0|1"
            This parameter controls the setting of a bit in the zip central header. It is used to
            signal that the data stored in the zip file/buffer is probably text.

            In one-shot mode this flag will be set to true if the Perl "-T" operator thinks the
            file contains text.

            The default is 0.

       "ExtraFieldLocal => $data"
       "ExtraFieldCentral => $data"
            The "ExtraFieldLocal" option is used to store additional metadata in the local header
            for the zip file/buffer. The "ExtraFieldCentral" does the same for the matching
            central header.

            An extra field consists of zero or more subfields. Each subfield consists of a two
            byte header followed by the subfield data.

            The list of subfields can be supplied in any of the following formats

                ExtraFieldLocal => [$id1, $data1,
                                    $id2, $data2,
                                     ...
                                   ]

                ExtraFieldLocal => [ [$id1 => $data1],
                                     [$id2 => $data2],
                                     ...
                                   ]

                ExtraFieldLocal => { $id1 => $data1,
                                     $id2 => $data2,
                                     ...
                                   }

            Where $id1, $id2 are two byte subfield ID's.

            If you use the hash syntax, you have no control over the order in which the
            ExtraSubFields are stored, plus you cannot have SubFields with duplicate ID.

            Alternatively the list of subfields can by supplied as a scalar, thus

                ExtraField => $rawdata

            In this case "IO::Compress::Zip" will check that $rawdata consists of zero or more
            conformant sub-fields.

            The Extended Time field (ID "UT"), set using the "exTime" option, and the Unix2 extra
            field (ID "Ux), set using the "exUnix2" option, are examples of extra fields.

            If the "Minimal" option is set to true, this option will be ignored.

            The maximum size of an extra field 65535 bytes.

       "Minimal => 1|0"
            If specified, this option will disable the creation of all extra fields in the zip
            local and central headers. So the "exTime", "exUnix2", "exUnixN", "ExtraFieldLocal"
            and "ExtraFieldCentral" options will be ignored.

            This parameter defaults to 0.

       "BlockSize100K => number"
            Specify the number of 100K blocks bzip2 uses during compression.

            Valid values are from 1 to 9, where 9 is best compression.

            This option is only valid if the "Method" is ZIP_CM_BZIP2. It is ignored otherwise.

            The default is 1.

       "WorkFactor => number"
            Specifies how much effort bzip2 should take before resorting to a slower fallback
            compression algorithm.

            Valid values range from 0 to 250, where 0 means use the default value 30.

            This option is only valid if the "Method" is ZIP_CM_BZIP2. It is ignored otherwise.

            The default is 0.

       "Preset => number"
            Used to choose the LZMA compression preset.

            Valid values are 0-9 and "LZMA_PRESET_DEFAULT".

            0 is the fastest compression with the lowest memory usage and the lowest compression.

            9 is the slowest compression with the highest memory usage but with the best
            compression.

            This option is only valid if the "Method" is ZIP_CM_LZMA. It is ignored otherwise.

            Defaults to "LZMA_PRESET_DEFAULT" (6).

       "Extreme => 0|1"
            Makes LZMA compression a lot slower, but a small compression gain.

            This option is only valid if the "Method" is ZIP_CM_LZMA. It is ignored otherwise.

            Defaults to 0.

       -Level
            Defines the compression level used by zlib. The value should either be a number
            between 0 and 9 (0 means no compression and 9 is maximum compression), or one of the
            symbolic constants defined below.

               Z_NO_COMPRESSION
               Z_BEST_SPEED
               Z_BEST_COMPRESSION
               Z_DEFAULT_COMPRESSION

            The default is Z_DEFAULT_COMPRESSION.

            Note, these constants are not imported by "IO::Compress::Zip" by default.

                use IO::Compress::Zip qw(:strategy);
                use IO::Compress::Zip qw(:constants);
                use IO::Compress::Zip qw(:all);

       -Strategy
            Defines the strategy used to tune the compression. Use one of the symbolic constants
            defined below.

               Z_FILTERED
               Z_HUFFMAN_ONLY
               Z_RLE
               Z_FIXED
               Z_DEFAULT_STRATEGY

            The default is Z_DEFAULT_STRATEGY.

       "Strict => 0|1"
            This is a placeholder option.

   Examples
       TODO

Methods

   print
       Usage is

           $z->print($data)
           print $z $data

       Compresses and outputs the contents of the $data parameter. This has the same behaviour as
       the "print" built-in.

       Returns true if successful.

   printf
       Usage is

           $z->printf($format, $data)
           printf $z $format, $data

       Compresses and outputs the contents of the $data parameter.

       Returns true if successful.

   syswrite
       Usage is

           $z->syswrite $data
           $z->syswrite $data, $length
           $z->syswrite $data, $length, $offset

       Compresses and outputs the contents of the $data parameter.

       Returns the number of uncompressed bytes written, or "undef" if unsuccessful.

   write
       Usage is

           $z->write $data
           $z->write $data, $length
           $z->write $data, $length, $offset

       Compresses and outputs the contents of the $data parameter.

       Returns the number of uncompressed bytes written, or "undef" if unsuccessful.

   flush
       Usage is

           $z->flush;
           $z->flush($flush_type);

       Flushes any pending compressed data to the output file/buffer.

       This method takes an optional parameter, $flush_type, that controls how the flushing will
       be carried out. By default the $flush_type used is "Z_FINISH". Other valid values for
       $flush_type are "Z_NO_FLUSH", "Z_SYNC_FLUSH", "Z_FULL_FLUSH" and "Z_BLOCK". It is strongly
       recommended that you only set the "flush_type" parameter if you fully understand the
       implications of what it does - overuse of "flush" can seriously degrade the level of
       compression achieved. See the "zlib" documentation for details.

       Returns true on success.

   tell
       Usage is

           $z->tell()
           tell $z

       Returns the uncompressed file offset.

   eof
       Usage is

           $z->eof();
           eof($z);

       Returns true if the "close" method has been called.

   seek
           $z->seek($position, $whence);
           seek($z, $position, $whence);

       Provides a sub-set of the "seek" functionality, with the restriction that it is only legal
       to seek forward in the output file/buffer.  It is a fatal error to attempt to seek
       backward.

       Empty parts of the file/buffer will have NULL (0x00) bytes written to them.

       The $whence parameter takes one the usual values, namely SEEK_SET, SEEK_CUR or SEEK_END.

       Returns 1 on success, 0 on failure.

   binmode
       Usage is

           $z->binmode
           binmode $z ;

       This is a noop provided for completeness.

   opened
           $z->opened()

       Returns true if the object currently refers to a opened file/buffer.

   autoflush
           my $prev = $z->autoflush()
           my $prev = $z->autoflush(EXPR)

       If the $z object is associated with a file or a filehandle, this method returns the
       current autoflush setting for the underlying filehandle. If "EXPR" is present, and is non-
       zero, it will enable flushing after every write/print operation.

       If $z is associated with a buffer, this method has no effect and always returns "undef".

       Note that the special variable $| cannot be used to set or retrieve the autoflush setting.

   input_line_number
           $z->input_line_number()
           $z->input_line_number(EXPR)

       This method always returns "undef" when compressing.

   fileno
           $z->fileno()
           fileno($z)

       If the $z object is associated with a file or a filehandle, "fileno" will return the
       underlying file descriptor. Once the "close" method is called "fileno" will return
       "undef".

       If the $z object is associated with a buffer, this method will return "undef".

   close
           $z->close() ;
           close $z ;

       Flushes any pending compressed data and then closes the output file/buffer.

       For most versions of Perl this method will be automatically invoked if the
       IO::Compress::Zip object is destroyed (either explicitly or by the variable with the
       reference to the object going out of scope). The exceptions are Perl versions 5.005
       through 5.00504 and 5.8.0. In these cases, the "close" method will be called
       automatically, but not until global destruction of all live objects when the program is
       terminating.

       Therefore, if you want your scripts to be able to run on all versions of Perl, you should
       call "close" explicitly and not rely on automatic closing.

       Returns true on success, otherwise 0.

       If the "AutoClose" option has been enabled when the IO::Compress::Zip object was created,
       and the object is associated with a file, the underlying file will also be closed.

   newStream([OPTS])
       Usage is

           $z->newStream( [OPTS] )

       Closes the current compressed data stream and starts a new one.

       OPTS consists of any of the options that are available when creating the $z object.

       See the "Constructor Options" section for more details.

   deflateParams
       Usage is

           $z->deflateParams

       TODO

Importing

       A number of symbolic constants are required by some methods in "IO::Compress::Zip". None
       are imported by default.

       :all Imports "zip", $ZipError and all symbolic constants that can be used by
            "IO::Compress::Zip". Same as doing this

                use IO::Compress::Zip qw(zip $ZipError :constants) ;

       :constants
            Import all symbolic constants. Same as doing this

                use IO::Compress::Zip qw(:flush :level :strategy :zip_method) ;

       :flush
            These symbolic constants are used by the "flush" method.

                Z_NO_FLUSH
                Z_PARTIAL_FLUSH
                Z_SYNC_FLUSH
                Z_FULL_FLUSH
                Z_FINISH
                Z_BLOCK

       :level
            These symbolic constants are used by the "Level" option in the constructor.

                Z_NO_COMPRESSION
                Z_BEST_SPEED
                Z_BEST_COMPRESSION
                Z_DEFAULT_COMPRESSION

       :strategy
            These symbolic constants are used by the "Strategy" option in the constructor.

                Z_FILTERED
                Z_HUFFMAN_ONLY
                Z_RLE
                Z_FIXED
                Z_DEFAULT_STRATEGY

       :zip_method
            These symbolic constants are used by the "Method" option in the constructor.

                ZIP_CM_STORE
                ZIP_CM_DEFLATE
                ZIP_CM_BZIP2

EXAMPLES

   Apache::GZip Revisited
       See IO::Compress::FAQ

   Working with Net::FTP
       See IO::Compress::FAQ

SEE ALSO

       Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip, IO::Compress::Deflate,
       IO::Uncompress::Inflate, IO::Compress::RawDeflate, IO::Uncompress::RawInflate,
       IO::Compress::Bzip2, IO::Uncompress::Bunzip2, IO::Compress::Lzma, IO::Uncompress::UnLzma,
       IO::Compress::Xz, IO::Uncompress::UnXz, IO::Compress::Lzop, IO::Uncompress::UnLzop,
       IO::Compress::Lzf, IO::Uncompress::UnLzf, IO::Uncompress::AnyInflate,
       IO::Uncompress::AnyUncompress

       IO::Compress::FAQ

       File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib

       For RFC 1950, 1951 and 1952 see http://www.faqs.org/rfcs/rfc1950.html,
       http://www.faqs.org/rfcs/rfc1951.html and http://www.faqs.org/rfcs/rfc1952.html

       The zlib compression library was written by Jean-loup Gailly gzip@prep.ai.mit.edu and Mark
       Adler madler@alumni.caltech.edu.

       The primary site for the zlib compression library is http://www.zlib.org.

       The primary site for gzip is http://www.gzip.org.

AUTHOR

       This module was written by Paul Marquess, pmqs@cpan.org.

MODIFICATION HISTORY

       See the Changes file.

COPYRIGHT AND LICENSE

       Copyright (c) 2005-2013 Paul Marquess. All rights reserved.

       This program is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.