Provided by: libmason-perl_2.21-1_all bug

NAME

       Mason::Manual::Filters - Content filters in Mason

DESCRIPTION

       Filters can be used to process portions of content in a component.

       A set of filters comes built-in with Mason - see Mason::Filters::Standard. Others will be
       available on CPAN, and it is easy to create your own.

INVOKING

   Block invocation
       Here's the standard way of invoking a filter:

          % $.Trim {{
            This string will be trimmed
          % }}  # end Trim

       A double open brace ("{{") at the end of a "%-line" denotes a filter call.  The filtered
       content begins just afterwards and ends at the "}}".  Both "{{" and "}}" may be followed
       by a comment.

       The expression "$.Trim", aka "$self->Trim", is a method call on the component object which
       returns a filter. In general everything before the "{{" is evaluated and is expected to
       return a filter or list of filters.

       By convention, and to avoid name clashes with other component methods, filters use
       CamelCase rather than traditional underscore names.

       Filters can take arguments:

          % $.Repeat(3) {{
            There's no place like home.
          % }}

            ==>  There's no place like home.
                 There's no place like home.
                 There's no place like home.

       Since the expression "$.Repeat(3)" returns a filter, it can be curried:

          % my $repeat_three = $.Repeat(3);
          % $repeat_three {{
            There's no place like home.
          % }}

       You can create one-off filters with anonymous subroutines. The subroutine receives the
       content in both $_[0] and $_, and should return the filtered content.

          % sub { reverse($_[0]) } {{
            Hello
          % }}

            ==> olleH

          % sub { s/ //g; $_[0] } {{
            A bunch of words
          % }}

            ==> Abunchofwords

       Filters can be nested, with separate lines:

          % $.Trim {{
          %   sub { uc($_[0]) } {{
            This string will be trimmed and uppercased
          %   }}
          % }}

       or on a single line:

          % $.Trim, sub { uc($_[0]) } {{
            This will be trimmed and uppercased
          % }}

       Multiple filters within the same tag are applied, intuitively, in reverse order with the
       last one being innermost. e.g. in this block

          % my $i = 1;
          % $.Repeat(3), $.Cache($key, '1 hour') {{
            <% $i++ %>
          % }}

             => 1 1 1

       the output of "<% $i++ %>" is cached, and then repeated three times, whereas in this block

          % my $i = 1;
          % $.Cache($key, '1 hour'), $.Repeat(3) {{
            <% $i++ %>
          % }}

             => 1 2 3

       "<% $i++ %>" is executed and output three times, and then the whole thing cached.

   Pipe invocation
       Filters can also appear in a limited way inside a regular "<% %>" tag:

           <% $content | NoBlankLines,Trim %>

       The filter list appears after a << | >> character and must contain one or more comma-
       separated names. The names are treated as methods on the current component class. With
       this syntax you cannot use anonymous subroutines or variables as filters, or pass
       arguments to filters. However in a pinch you can define local filter methods to get around
       this, e.g.

           <%class>
           method Repeat3 { $.Repeat(3); }
           </%class>
           ...
           <% $message_body | Repeat3 %>

       For consistency with other syntax, multiple names are applied in reverse order with the
       rightmost applied first.

       One common use of this form is to escape HTML strings in web content, using the "H" filter
       in Mason::Plugin::HTMLFilters:

           <% $message_body | H %>

   Default filters
       Mason::Plugin::DefaultFilter allows you to define default filters that will automatically
       apply to all substitution tags.  It is analagous to HTML::Mason's default_escape_flags
       setting.

   Manual invocation
       $m->filter can be used to manually apply filter(s) to a string. It returns the filtered
       output. e.g.

           <%init>
           ...
           my $filtered_string = $m->filter($.Trim, $.NoBlankLines, $string);
           </%init>

CREATING A FILTER

   Package and naming
       By convention, filters are placed in roles so that they can be composed into
       Mason::Component or a subclass thereof. Take a look at Mason::Filters::Standard for an
       example.

       Also by convention, filters use CamelCase rather than traditional underscore_separated
       naming.  Filter methods have to coexist with other methods in the Mason::Component
       namespace, so have to be distinguishable somehow, and we thought this was preferable to a
       "filter_" prefix or suffix. Of course, you are free to choose your own convention, but you
       should expect this naming in the standard filters at least.

       Here's a filter package that implements two filters, "Upper" and "Lower":

           package MyApp::Filters;
           use Mason::PluginRole;

           method Upper () {
               return sub { uc($_[0]) }
           }

           method Lower () {
               return sub { lc($_[0]) }
           }

           1;

       To use these in a component:

           <%class>
           with 'MyApp::Filters';
           </%class>

           % $.Upper {{
           ...
           % }}

       Or if you want them available to all components, put them in "Base.mp" at the top of your
       component hierarchy, or in your application's "Mason::Component" subclass.

   Simple vs. dynamic filters
       A simple filter is a code ref which takes a string (via either $_[0] and $_) and returns
       the output.  Your filter method should return this code ref. e.g.

           # Uses $_[0]
           method Upper () {
               return sub { uc($_[0]) };
           }

           # Uses $_
           method Rot13 () {
               return sub { tr/a-zA-Z/n-za-mN-ZA-M/; $_ };
           }

       A dynamic filter is an object of class "Mason::DynamicFilter". It contains a code ref
       which takes a yield block and returns the output. A yield block is a zero-argument code
       ref that returns a content string. e.g.  this is functionally identical to the above:

           method Rot13 () {
               return Mason::DynamicFilter->new(
                   filter => sub {
                       my $yield = $_[0];
                       my $text = $yield->();
                       $text =~ tr/a-zA-Z/n-za-mN-ZA-M/;
                       return $text;
                   }
               );
           }

       The dynamic filter obviously doesn't buy you anything in this case, and for the majority
       of filters they are unneeded.  The real power of dynamic filters is that they can choose
       if and when to execute the yield block. For example, here is an implementation (slightly
       expanded for explanatory purposes) of the  "Cache" filter in Mason::Plugin::Cache:

           method Cache ( $key, $set_options ) {
               return Mason::DynamicFilter->new(
                   filter => sub {
                       my $yield = $_[0];
                       my $cache = $self->cache;
                       my $output = $cache->get( $key );
                       if (!$output) {
                           $output = $yield->();
                           $cache->set( $key, $output, $set_options );
                       }
                       return $output;
                   }
               );
           }

       Notice that we call "$cache->get" first, and return the output immediately if it is in the
       cache. Only on a cache miss do we actually execute the (presumably expensive) yield block.

       "Defer" and "Repeat" are two other examples of dynamic filters. See
       Mason::Filters::Standard for their implementations.

   <%filter> block
       You can use the "<%filter>" block to define filters that output content.  It works just
       like a "<%method>" block, except that you can call "$yield->()" to generate the original
       content. e.g.

           <%filter Item ($class)>
           <li class="<% $class %>"><% $yield->() %></li>
           </%filter>

           % $.Item('std') {{
             First
           % }}
           % $.Item('std') {{
             Second
           % }}

       generates

           <li class="std">
             First
           </li>
           <li class="std">
             Second
           </li>

SEE ALSO

       Mason::Filters::Standard, Mason

AUTHOR

       Jonathan Swartz <swartz@pobox.com>

COPYRIGHT AND LICENSE

       This software is copyright (c) 2012 by Jonathan Swartz.

       This is free software; you can redistribute it and/or modify it under the same terms as
       the Perl 5 programming language system itself.