Provided by: perl-doc_5.18.2-2ubuntu1.7_all bug

NAME

       Net::Config - Local configuration data for libnet

SYNOPSYS

           use Net::Config qw(%NetConfig);

DESCRIPTION

       "Net::Config" holds configuration data for the modules in the libnet distribution. During
       installation you will be asked for these values.

       The configuration data is held globally in "/etc/perl/Net/libnet.cfg", but a user may
       override any of these values by providing their own. This can be done by having a
       ".libnetrc" file in their home directory. This file should return a reference to a HASH
       containing the keys described below.  For example

           # .libnetrc
           {
               nntp_hosts => [ "my_preferred_host" ],
               ph_hosts   => [ "my_ph_server" ],
           }
           __END__

METHODS

       "Net::Config" defines the following methods. They are methods as they are invoked as class
       methods. This is because "Net::Config" inherits from "Net::LocalCfg" so you can override
       these methods if you want.

       requires_firewall HOST
           Attempts to determine if a given host is outside your firewall. Possible return values
           are.

             -1  Cannot lookup hostname
              0  Host is inside firewall (or there is no ftp_firewall entry)
              1  Host is outside the firewall

           This is done by using hostname lookup and the "local_netmask" entry in the
           configuration data.

NetConfig VALUES

       nntp_hosts
       snpp_hosts
       pop3_hosts
       smtp_hosts
       ph_hosts
       daytime_hosts
       time_hosts
           Each is a reference to an array of hostnames (in order of preference), which should be
           used for the given protocol

       inet_domain
           Your internet domain name

       ftp_firewall
           If you have an FTP proxy firewall (NOT an HTTP or SOCKS firewall) then this value
           should be set to the firewall hostname. If your firewall does not listen to port 21,
           then this value should be set to "hostname:port" (eg "hostname:99")

       ftp_firewall_type
           There are many different ftp firewall products available. But unfortunately there is
           no standard for how to traverse a firewall.  The list below shows the sequence of
           commands that Net::FTP will use

             user        Username for remote host
             pass        Password for remote host
             fwuser      Username for firewall
             fwpass      Password for firewall
             remote.host The hostname of the remote ftp server

           0   There is no firewall

           1
                    USER user@remote.host
                    PASS pass

           2
                    USER fwuser
                    PASS fwpass
                    USER user@remote.host
                    PASS pass

           3
                    USER fwuser
                    PASS fwpass
                    SITE remote.site
                    USER user
                    PASS pass

           4
                    USER fwuser
                    PASS fwpass
                    OPEN remote.site
                    USER user
                    PASS pass

           5
                    USER user@fwuser@remote.site
                    PASS pass@fwpass

           6
                    USER fwuser@remote.site
                    PASS fwpass
                    USER user
                    PASS pass

           7
                    USER user@remote.host
                    PASS pass
                    AUTH fwuser
                    RESP fwpass

       ftp_ext_passive
       ftp_int_passive
           FTP servers can work in passive or active mode. Active mode is when you want to
           transfer data you have to tell the server the address and port to connect to.  Passive
           mode is when the server provide the address and port and you establish the connection.

           With some firewalls active mode does not work as the server cannot connect to your
           machine (because you are behind a firewall) and the firewall does not re-write the
           command. In this case you should set "ftp_ext_passive" to a true value.

           Some servers are configured to only work in passive mode. If you have one of these you
           can force "Net::FTP" to always transfer in passive mode; when not going via a
           firewall, by setting "ftp_int_passive" to a true value.

       local_netmask
           A reference to a list of netmask strings in the form "134.99.4.0/24".  These are used
           by the "requires_firewall" function to determine if a given host is inside or outside
           your firewall.

       The following entries are used during installation & testing on the libnet package

       test_hosts
           If true then "make test" may attempt to connect to hosts given in the configuration.

       test_exists
           If true then "Configure" will check each hostname given that it exists

POD ERRORS

       Hey! The above document had some coding errors, which are explained below:

       Around line 219:
           Expected text after =item, not a number

       Around line 224:
           Expected text after =item, not a number

       Around line 231:
           Expected text after =item, not a number

       Around line 239:
           Expected text after =item, not a number

       Around line 247:
           Expected text after =item, not a number

       Around line 252:
           Expected text after =item, not a number

       Around line 259:
           Expected text after =item, not a number