Provided by: libperl-critic-perl_1.121-1_all bug

NAME

       Perl::Critic::Policy::ValuesAndExpressions::ProhibitMagicNumbers - Don't use values that
       don't explain themselves.

AFFILIATION

       This Policy is part of the core Perl::Critic distribution.

DESCRIPTION

       What is a "magic number"?  A magic number is a number that appears in code without any
       explanation; e.g.  "$bank_account_balance *= 57.492;".  You look at that number and have
       to wonder where that number came from.  Since you don't understand the significance of the
       number, you don't understand the code.

       In general, numeric literals other than 0 or 1 in should not be used.  Use the constant
       pragma or the Readonly or Const::Fast modules to give a descriptive name to the number.

       There are, of course, exceptions to when this rule should be applied.  One good example is
       positioning of objects in some container like shapes on a blueprint or widgets in a user
       interface.  In these cases, the significance of a number can readily be determined by
       context.

       The maximum number of violations per document for this policy defaults to 10.

   Ways in which this module applies this rule.
       By default, this rule is relaxed in that 2 is permitted to allow for common things like
       alternation, the STDERR file handle, etc..

       Numeric literals are allowed in "use" and "require" statements to allow for things like
       Perl version restrictions and Test::More plans.  Declarations of $VERSION package
       variables are permitted.  Use of "Readonly", "Readonly::Scalar", "Readonly::Array", and
       "Readonly::Hash" from the Readonly module are obviously valid, but use of
       "Readonly::Scalar1", "Readonly::Array1", and "Readonly::Hash1" are specifically not
       supported.

       Use of binary, exponential, hexadecimal, octal, and version numbers, even for 0 and 1,
       outside of "use"/"require"/"Readonly" statements aren't permitted (but you can change
       this).

       There is a special exemption for accessing the last element of an array, i.e. $x[-1].

           $x = 0;                                   # ok
           $x = 0.0;                                 # ok
           $x = 1;                                   # ok
           $x = 1.0;                                 # ok
           $x = 1.5;                                 # not ok
           $x = 0b0                                  # not ok
           $x = 0b1                                  # not ok
           $x = 0x00                                 # not ok
           $x = 0x01                                 # not ok
           $x = 000                                  # not ok
           $x = 001                                  # not ok
           $x = 0e1                                  # not ok
           $x = 1e1                                  # not ok

           $frobnication_factor = 42;                # not ok
           use constant FROBNICATION_FACTOR => 42;   # ok

           use 5.6.1;                                # ok
           use Test::More plan => 57;                # ok
           plan tests => 39;                         # ok
           our $VERSION = 0.22;                      # ok

           $x = $y[-1]                               # ok
           $x = $y[-2]                               # not ok

           foreach my $solid (1..5) {                # not ok
               ...
           }

           use Readonly;

           Readonly my $REGULAR_GEOMETRIC_SOLIDS => 5;

           foreach my $solid (1..$REGULAR_GEOMETRIC_SOLIDS) {  #ok
               ...
           }

CONFIGURATION

       This policy has four options: "allowed_values", "allowed_types",
       "allow_to_the_right_of_a_fat_comma", and "constant_creator_subroutines".

   "allowed_values"
       The "allowed_values" parameter is a whitespace delimited set of permitted number values;
       this does not affect the permitted formats for numbers.  The defaults are equivalent to
       having the following in your .perlcriticrc:

           [ValuesAndExpressions::ProhibitMagicNumbers]
           allowed_values = 0 1 2

       Note that this policy forces the values 0 and 1 into the permitted values.  Thus,
       specifying no values,

           allowed_values =

       is the same as simply listing 0 and 1:

           allowed_values = 0 1

       The special "all_integers" value, not surprisingly, allows all integral values to pass,
       subject to the restrictions on number types.

       Ranges can be specified as two (possibly fractional) numbers separated by two periods,
       optionally suffixed with an increment using the Perl 6 ":by()" syntax.  E.g.

           allowed_values = 7..10

       will allow 0, 1, 7, 8, 9, and 10 as literal values.  Using fractional values like so

           allowed_values = -3.5..-0.5:by(0.5)

       will permit -3.5, -3, -2.5, -2, -2.5, -1, -0.5, 0, and 1.  Unsurprisingly, the increment
       defaults to 1, which means that

           allowed_values = -3.5..-0.5

       will make -3.5, -2.5, -2.5, -0.5, 0, and 1 valid.

       Ranges are not lazy, i.e. you'd better have a lot of memory available if you use a range
       of "1..1000:by(0.01)".  Also remember that all of this is done using floating-point math,
       which means that "1..10:by(0.3333)" is probably not going to be very useful.

       Specifying an upper limit that is less than the lower limit will result in no values being
       produced by that range.  Negative increments are not permitted.

       Multiple ranges are permitted.

       To put this all together, the following is a valid, though not likely to be used,
       .perlcriticrc entry:

           [ValuesAndExpressions::ProhibitMagicNumbers]
           allowed_values = 3.1415269 82..103 -507.4..57.8:by(0.2) all_integers

   "allowed_types"
       The "allowed_types" parameter is a whitespace delimited set of subclasses of
       PPI::Token::Number.

       Decimal integers are always allowed.  By default, floating-point numbers are also allowed.

       For example, to allow hexadecimal literals, you could configure this policy like

           [ValuesAndExpressions::ProhibitMagicNumbers]
           allowed_types = Hex

       but without specifying anything for "allowed_values", the allowed hexadecimal literals
       will be 0x00, 0x01, and 0x02.  Note, also, as soon as you specify a value for this
       parameter, you must include "Float" in the list to continue to be able to use floating
       point literals.  This effect can be used to restrict literals to only decimal integers:

           [ValuesAndExpressions::ProhibitMagicNumbers]
           allowed_types =

       If you permit exponential notation, you automatically also allow floating point values
       because an exponential is a subclass of floating-point in PPI.

   "allow_to_the_right_of_a_fat_comma"
       If this is set, you can put any number to the right of a fat comma.

           my %hash =     ( a => 4512, b => 293 );         # ok
           my $hash_ref = { a => 4512, b => 293 };         # ok
           some_subroutine( a => 4512, b => 293 );         # ok

       Currently, this only means directly to the right of the fat comma.  By default, this value
       is true.

   "constant_creator_subroutines"
       This parameter allows you to specify the names of subroutines that create constants, in
       addition to "Readonly", "Const::Fast", and friends.  For example, if you use a custom
       "Const::Fast"-like module that supports a "create_constant" subroutine to create
       constants, you could add something like the following to your .perlcriticrc:

           [ValuesAndExpressions::ProhibitMagicNumbers]
           constant_creator_subroutines = create_constant

       If you have more than one name to add, separate them by whitespace.

       The subroutine name should appear exactly as it is in your code.  For example, if your
       code does not import the creating subroutine subroutine, you would need to configure this
       policy as something like

           [ValuesAndExpressions::ProhibitMagicNumbers]
           constant_creator_subroutines = create_constant Constant::Create::create_constant

BUGS

       There is currently no way to permit version numbers in regular code, even if you include
       them in the "allowed_types".  Some may actually consider this a feature.

AUTHOR

       Elliot Shank "<perl@galumph.com>"

COPYRIGHT

       Copyright (c) 2006-2011 Elliot Shank.

       This program is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.  The full text of this license can be found in the LICENSE file
       included with this module.

perl v5.18.1                Perl::Critic::Policy::ValuesAndExpressions::ProhibitMagicNumbers(3pm)