Provided by: libpod-2-docbook-perl_0.03-2_all bug

NAME

       Pod::2::DocBook - Convert Pod data to DocBook SGML

SYNOPSIS

           use Pod::2::DocBook;
           my $parser = Pod::2::DocBook->new(
               title             => 'My Article',
               doctype           => 'article',
               base_id           => 'article42'
               fix_double_quotes => 1,
               spaces            => 3,
               id_version        => 2,
           );

         $parser->parse_from_file ('my_article.pod', 'my_article.sgml');

DESCRIPTION

       Pod::2::DocBook is a module for translating Pod-formatted documents to DocBook 4.2 SGML
       (see <http://www.docbook.org/>).  It is primarily a back end for pod2docbook, but, as a
       Pod::Parser subclass, it can be used on its own.  The only public extensions to the
       Pod::Parser interface are options available to "new()":

       doctype
           This option sets the output document's doctype.  The currently supported types are
           article, chapter, refentry and section.  Special processing is performed when the
           doctype is set to refentry (see "Document Types").  You must set this option in order
           to get valid DocBook output.

       fix_double_quotes
           If this option is set to a true value, pairs of double quote characters ('"') in
           ordinary paragraphs will be replaced with <quote> and </quote>.  See "Ordinary
           Paragraphs" for details.

       header
           If this option is set to a true value, Pod::2::DocBook will emit a DOCTYPE as the
           first line of output.

       spaces
           Pod::2::DocBook produces pretty-printed output.  This option sets the number of spaces
           per level of indentation in the output.

       title
           This option sets the output document's title.

       The rest of this document only describes issues specific to Pod::2::DocBook; for details
       on invoking the parser, specifically the "new()", "parse_from_file()" and
       "parse_from_filehandle()" methods, see Pod::Parser.

METHODS

           use base 'Pod::Parser';

   initialize()
       Initialize parser.

   begin_pod()
       Output docbook header stuff.

   end_pod()
       Output docbook footer. Will print also errors if any in a comment block.

   commans($command, $paragraph, $line_num)
       Process POD commands.

   textblock ($paragraph, $line_num)
       Process text block.

   verbatim($paragraph, $line_num)
       Process verbatim text block.

   interior_sequence($command, $argument, $seq)
       Process formatting commands.

   error_msg
       Returns parser error message(s) if any occured.

   make_id($text)
       default id format -

       Function will construct an element id string. Id string is composed of "join (':',
       $parser->{base_id}, $text)", where $text in most cases is the pod heading text.

       version 2 id format -

       having ':' in id was not a best choice. (Xerces complains - Attribute value
       "lib.Moose.Manual.pod:NAME" of type ID must be an NCName when namespaces are enabled.) To
       not break backwards compatibity switch with <id_version = 2>> in constructor for using '-'
       instead.

       The xml id string has strict format. Checkout "cleanup_id" function for specification.

   make_uniq_id($text)
       Calls "$parser->make_id($text)" and checks if such id was already generated. If so,
       generates new one by adding _i1 (or _i2, i3, ...) to the id string. Return value is new
       uniq id string.

   cleanup_id($id_string)
       This function is used internally to remove/change any illegal characters from the elements
       id string. (see http://www.w3.org/TR/2000/REC-xml-20001006#NT-Name for the id string
       specification)

           $id_string =~ s/<!\[CDATA\[(.+?)\]\]>/$1/g;   # keep just inside of CDATA
           $id_string =~ s/<.+?>//g;                     # remove tags
           $id_string =~ s/^\s*//;                       # ltrim spaces
           $id_string =~ s/\s*$//;                       # rtrim spaces
           $id_string =~ tr{/ }{._};                     # replace / with . and spaces with _
           $id_string =~ s/[^\-_a-zA-Z0-9\.: ]//g;       # closed set of characters allowed in id string

       In the worst case when the $id_string after clean up will not conform with the
       specification, warning will be printed out and random number with leading colon will be
       used.

POD TO DOCBOOK TRANSLATION

       Pod is a deceptively simple format; it is easy to learn and very straightforward to use,
       but it is suprisingly expressive.  Nevertheless, it is not nearly as expressive or complex
       as DocBook.  In most cases, given some Pod, the analogous DocBook markup is obvious, but
       not always.  This section describes how Pod::2::DocBook treats Pod input so that Pod
       authors may make informed choices.  In every case, Pod::2::DocBook strives to make easy
       things easy and hard things possible.

       The primary motivation behind Pod::2::DocBook is to facilitate single-source publishing.
       That is, you should be able to generate man pages, web pages, PDF and PostScript
       documents, or any other format your SGML and/or Pod tools can produce, from the same Pod
       source, without the need for hand-editing any intermediate files.  This may not always be
       possible, or you may simply choose to render Pod to DocBook and use that as your single
       source.  To satisfy the first requirement, Pod::2::DocBook always processes the entire Pod
       source and tries very hard to produce valid DocBook markup, even in the presence of
       malformed Pod (see "DIAGNOSTICS").  To satisfy the second requirement (and to be a little
       nifty), Pod::2::DocBook pretty-prints its output.  If you're curious about what specific
       output to expect, read on.

   Document Types
       DocBook's structure is very modular; many of its document types can be embedded directly
       into other documents.  Accordingly, Pod::2::DocBook will generate four different document
       types: article, chapter, refentry, and section.  This makes it easy, for instance, to
       write all the chapters of a book in separate Pod documents, translate them into DocBook
       markup and later glue them together before processing the entire book.  You could do the
       same with each section in an article, or you could write the entire article in a single
       Pod document.  Other document types, such as book and set, do not map easily from Pod,
       because they require structure for which there is no Pod equivalent.  But given sections
       and chapters, making larger documents becomes much simpler.

       The refentry document type is a little different from the others.  Sections, articles, and
       chapters are essentially composed of nested sections.  But a refentry has specialized
       elements for the NAME and SYNOPSIS sections.  To accommodate this, Pod::2::DocBook
       performs extra processing on the Pod source when the doctype is set to refentry.  You
       probably don't have to do anything to your document to assist the processing; typical man
       page conventions cover the requirements.  Just make sure that the NAME and SYNOPSIS
       headers are both =head1s, that "NAME" and "SYNOPSIS" are both uppercase, and that =head1
       NAME is the first line of Pod source.

   Ordinary Paragraphs
       Ordinary paragraphs in a Pod document translate naturally to DocBook paragraphs.
       Specifically, after any formatting codes are processed, the characters "<", ">" and "&"
       are translated to their respective SGML character entities, and the paragraph is wrapped
       in <para> and </para>.

       For example, given this Pod paragraph:

         Here is some text with I<italics> & an ampersand.

       Pod::2::DocBook would produce DocBook markup similar to this:

         <para>
           Here is some text with <emphasis role="italic">italics</emphasis>
           &amp; an ampersand.
         </para>

       Depending on your final output format, you may sometimes want double quotes in ordinary
       paragraphs to show up ultimately as "smart quotes" (little 66s and 99s).  Pod::2::DocBook
       offers a convenient mechanism for handling double quotes in ordinary paragraphs and
       letting your SGML toolchain manage their presentation: the fix_double_quotes option to
       "new()".  If this option is set to a true value, Pod::2::DocBook will replace pairs of
       double quotes in ordinary paragraphs (and only in ordinary paragraphs) with <quote> and
       </quote>.

       For example, given this Pod paragraph:

         Here is some text with I<italics> & an "ampersand".

       Pod::2::DocBook, with fix_double_quotes set, would produce DocBook markup similar to this:

         <para>
           Here is some text with <emphasis role="italic">italics</emphasis>
           &amp; an <quote>ampersand</quote>.
         </para>

       If you have a paragraph with an odd number of double quotes, the last one will be left
       untouched, which may or may not be what you want.  If you have such a document, replace
       the unpaired double quote character with E<quot>, and Pod::2::DocBook should be able to
       give you the output you expect.  Also, if you have any =begin docbook ... =end docbook
       regions (see "Embedded DocBook Markup") in your Pod, you are responsible for managing your
       own quotes in those regions.

   Verbatim Paragraphs
       Verbatim paragraphs translate even more naturally; perlpodspec mandates that absolutely no
       processing should be performed on them.  So Pod::2::DocBook simply marks them as CDATA and
       wraps them in <screen> and </screen>.  They are not indented the way ordinary paragraphs
       are, because they treat whitespace as significant.

       For example, given this verbatim paragraph (imagine there's leading whitespace in the
       source):

         my $i = 10;
         while (<> && $i--) {
             print "$i: $_";
         }

       Pod::2::DocBook would produce DocBook markup similar to this:

         <screen><![CDATA[my $i = 10;
         while (<> && $i--) {
             print "$i: $_";
         }]] ></screen>

       Multiple contiguous verbatim paragraphs are treated as a single screen element, with blank
       lines separating the paragraphs, as dictated by perlpodspec.

   Command Paragraphs
       "=head1 Heading Text"
       "=head2 Heading Text"
       "=head3 Heading Text"
       "=head4 Heading Text"
           All of the Pod heading commands produce DocBook section elements, with the heading
           text as titles.  Pod::2::DocBook (perlpod) only allows for 4 heading levels, but
           DocBook allows arbitrary nesting; see "Embedded DocBook Markup" if you need more than
           4 levels.  Pod::2::DocBook only looks at relative heading levels to determine nesting.
           For example, this bit of Pod:

             =head1 1

             Contents of section 1

             =head2 1.1

             Contents of section 1.1

           and this bit of Pod:

             =head1 1

             Contents of section 1

             =head3 1.1

             Contents of section 1.1

           both produce the same DocBook markup, which will look something like this:

             <section id="article-My-Article-1"><title>1</title>
               <para>
                 Contents of section 1
               </para>
               <section id="article-My-Article-1-1"><title>1.1</title>
                 <para>
                   Contents of section 1.1
                 </para>
               </section>
             </section>

           Note that Pod::2::DocBook automatically generates section identifiers from your
           doctype, document title and section title.  It does the same when you make internal
           links (see "Formatting Codes", ensuring that if you supply the same link text as you
           did for the section title, the resulting identifiers will be the same.

       "=over indentlevel"
       "=item stuff..."
       "=back"
           "=over" ... "=back" regions are somewhat complex, in that they can lead to a variety
           of DocBook constructs.  In every case, indentlevel is ignored by Pod::2::DocBook,
           since that's best left to your stylesheets.

           An "=over" ... "=back" region with no "=item"s represents indented text and maps
           directly to a DocBook blockquote element.  Given this source:

             =over 4

             This text should be indented.

             =back

           Pod::2::DocBook will produce DocBook markup similar to this:

             <blockquote>
               <para>
                 This text should be indented.
               </para>
             </blockquote>

           Inside an "=over" ... "=back" region, "=item" commands generate lists.  The text that
           follows the first "=item" determines the type of list that will be output:

           •   "*" (an asterisk) produces <itemizedlist>

           •   "1" or "1." produces <orderedlist numeration="arabic">

           •   "a" or "a." produces <orderedlist numeration="loweralpha">

           •   "A" or "A." produces <orderedlist numeration="upperalpha">

           •   "i" or "i." produces <orderedlist numeration="lowerroman">

           •   "I" or "I." produces <orderedlist numeration="upperroman">

           •   anything else produces <variablelist>

           Since the output from each of these is relatively verbose, the best way to see
           examples is to actually render some Pod into DocBook.

       "=pod"
       "=cut"
           Pod::Parser recognizes these commands, and, therefore, so does Pod::2::DocBook, but
           they don't produce any output.

       "=begin formatname"
       "=end formatname"
       "=for formatname text..."
           Pod::2::DocBook supports two formats: docbook, explained in "Embedded DocBook Markup",
           and table, explained in "Simple Tables".

       "=encoding encodingname"
           This command is currently not supported.  If Pod::2::DocBook encounters a document
           that contains "=encoding", it will ignore the command and report an error ("unknown
           command `%s' at line %d in file %s").

       Embedded DocBook Markup

       There are a wide range of DocBook structures for which there is no Pod equivalent.  For
       these, you will have to provide your own markup using =begin docbook ... =end docbook or
       =for docbook ....  Pod::2::DocBook will directly output whatever text you provide,
       unprocessed, so it's up to you to ensure that it's valid DocBook.

       Images, footnotes and many inline elements are obvious candidates for embedded markup.
       Another possible use is nesting sections more than four-deep.  For example, given this
       source:

         =head1  1

         This is Section 1

         =head2 1.1

         This is Section 1.1

         =head3 1.1.1

         This is Section 1.1.1

         =head4 1.1.1.1

         This is Section 1.1.1.1

         =begin docbook

         <section>
         <title>1.1.1.1.1</title>
         <para>This is Section 1.1.1.1.1</para>
         </section>

         =end docbook

       Pod::2::DocBook will generate DocBook markup similar to this:

           <section id="article-My-Article-1"><title>1</title>
             <para>
               This is Section 1
             </para>
             <section id="article-My-Article-1-1"><title>1.1</title>
               <para>
             This is Section 1.1
               </para>
               <section id="article-My-Article-1-1-1"><title>1.1.1</title>
                 <para>
               This is Section 1.1.1
                 </para>
                 <section id="article-My-Article-1-1-1-1"><title>1.1.1.1</title>
                   <para>
                 This is Section 1.1.1.1
                   </para>
         <section>
         <title>1.1.1.1.1</title>
         <para>This is Section 1.1.1.1.1</para>
         </section>
                 </section>
               </section>
             </section>
           </section>

       Simple Tables

       Pod::2::DocBook also provides a mechanism for generating basic tables with =begin table
       and =end docbook.  If you have simple tabular data or a CSV file exported from some
       application, Pod::2::DocBook makes it easy to generate a table from your data.  The syntax
       is intended to be simple, so DocBook's entire table feature set is not represented, but
       even if you do need more complex table markup than Pod::2::DocBook produces, you can
       rapidly produce some markup which you can hand-edit and then embed directly in your Pod
       with =begin docbook ... =end docbook.  Each table definition spans multiple lines, so
       there is no equivalent =for table command.

       The first line of a table definition gives the table's title.  The second line gives a
       list of comma-separated column specifications (really just column alignments), each of
       which can be left, center or right.  The third line is a list of comma-separated column
       headings, and every subsequent line consists of comma-separated row data.  If any of your
       data actually contain commas, you can enclose them in double quotes; if they also contain
       double quotes, you must escape the inner quotes with backslashes (typical CSV stuff).

       Here's an example:

         =begin table

         Sample Table
         left,center,right
         Powers of Ten,Planets,Dollars
         10,Earth,$1
         100,Mercury,$5
         1000,Mars,$10
         10000,Venus,$20
         100000,"Jupiter, Saturn",$50

         =end table

       And here's what Pod::2::DocBook would do with it:

         <table>
           <title>Sample Table</title>
           <tgroup cols="3">
             <colspec align="left">
             <colspec align="center">
             <colspec align="right">
             <thead>
               <row>
                 <entry>Powers of Ten</entry>
                 <entry>Planets</entry>
                 <entry>Dollars</entry>
               </row>
             </thead>
             <tbody>
               <row>
                 <entry>10</entry>
                 <entry>Earth</entry>
                 <entry>$1</entry>
               </row>
               <row>
                 <entry>100</entry>
                 <entry>Mercury</entry>
                 <entry>$5</entry>
               </row>
               <row>
                 <entry>1000</entry>
                 <entry>Mars</entry>
                 <entry>$10</entry>
               </row>
               <row>
                 <entry>10000</entry>
                 <entry>Venus</entry>
                 <entry>$20</entry>
               </row>
               <row>
                 <entry>100000</entry>
                 <entry>Jupiter, Saturn</entry>
                 <entry>$50</entry>
               </row>
             </tbody>
           </tgroup>
         </table>

   Formatting Codes
       Pod formatting codes render directly into DocBook as inline elements:

       •   "I<text>"

             <emphasis role="italic">text</emphasis>

       •   "B<text>"

             <emphasis role="bold">text</emphasis>

       •   "C<code>"

             <literal role="code"><![CDATA[code]] ></literal>

       •   "L<name>"

             <citerefentry><refentrytitle>name</refentrytitle></citerefentry>

       •   "L<name(n)>"

             <citerefentry><refentrytitle>name</refentrytitle>
             <manvolnum>n</manvolnum></citerefentry>

       •   "L<name/"sec">" or "L<name/sec>"

             <quote>sec</quote> in <citerefentry>
             <refentrytitle>name</refentrytitle></citerefentry>

       •   "L<name(n)/"sec">" or "L<name(n)/sec>"

             <quote>sec</quote> in <citerefentry>
             <refentrytitle>name</refentrytitle><manvolnum>n</manvolnum>
             </citerefentry>

       •   "L</"sec">" or "L</sec>" or  "L<"sec">"

             <link linkend="article-My-Article-sec"><quote>sec</quote></link>

       •   "L<text|name>"

             text

       •   "L<text|name/"sec">" or "L<text|name/sec>"

             text

       •   "L<text|/"sec">" or "L<text|/sec>" or "L<text|"sec">"

             <link linkend="article-My-Article-sec"><quote>text</quote></link>

       •   "L<scheme:...>"

             <ulink url="scheme:...">scheme:...</ulink>

       •   "E<verbar>"

             |

       •   "E<sol>"

             /

       •   "E<number>"

             &#number;

       •   any other "E<escape>"

             &escape;

       •   "F<filename>"

           <filename>filename</filename>

       •   "S<text with spaces>"

            text&nbsp;with&nbsp;spaces

       •   "X<topic name>"

           <indexterm><primary>topic name</primary></indexterm>

DIAGNOSTICS

       Pod::2::DocBook makes every possible effort to produce valid DocBook markup, even with
       malformed POD source.  Any processing errors will be noted in comments at the end of the
       output document.  Even when errors occur, Pod::2::DocBook always reads the entire input
       document and never exits with a non-zero status.

       unknown command `%s' at line %d in file %s
           See "Command Paragraph" in perlpod for a list of valid commands.  The command
           referenced in the error message was ignored.

       formatting code `%s' nested within `%s' at line %d in file %s
           See "Formatting Codes" in perlpod for details on which formatting codes can be nested.
           The offending code was translated into the output document as the raw text inside its
           angle brackets.

       unknown formatting code `%s' at line in file %s
           The input contained a formatting code not listed in perlpod; it was translated into
           the output document as the raw text inside the angle brackets.

       empty L<> at line %d in file %s
           Self-explanatory.

       invalid escape `%s' at line %d in file %s
           Self-explanatory; it was translated into the output document as the raw text inside
           the angle brackets.

       =item must be inside an =over ... =back section at line %d in file %s
           Self-explanatory.  The `=item' referenced in the error was ignored.

       `=end %s' found but current region opened with `=begin %s'
           The closest `=end' command to the referenced `=begin' didn't match; processing
           continued as if the mismatched `=end' wasn't there.

       no matching `=end' for `=begin %s'
           Pod::2::DocBook reached the end of its input without finding an `=end' command to
           match the `=begin' referenced in the error; end-of-file processing continued.

       unknown colspec `%s' in table at line %d in file %s
           See "Simple Tables" for a list of supported column specifications.

       encountered unknown state `%s' (this should never happen)
           The state referred to is an internal variable used to properly manage nested DocBook
           structures.  You should indeed never see this message, but if you do, you should
           contact the module's author.

SEE ALSO

       pod2docbook, perlpod, Pod::DocBook, SVN repo -
       https://cle.sk/repos/pub/cpan/Pod-2-DocBook/
       <https://cle.sk/repos/pub/cpan/Pod-2-DocBook/>,
       http://www.ohloh.net/projects/pod-2-docbook <http://www.ohloh.net/projects/pod-2-docbook>,
       doc/ + examples/pod2docbook-docbook/ for Pod::2::DocBook DocBook documentation

       DocBook related links: <http://www.docbook.org/>, <http://www.sagehill.net/docbookxsl/>,
       http://developers.cogentrts.com/cogent/prepdoc/pd-axfrequentlyuseddocbooktags.html
       <http://developers.cogentrts.com/cogent/prepdoc/pd-axfrequentlyuseddocbooktags.html>

AUTHOR

       Alligator Descartes <descarte@symbolstone.org> wrote a module called Pod::2::DocBook,
       which was later maintained by Jan Iven <jan.iven@cern.ch>.  That module was based on the
       original pod2html by Tom Christiansen <tchrist@mox.perl.com>.

       Nandu Shah <nandu@zvolve.com> wrote Pod::DocBook, which is unrelated to the previous
       module (even though they both perform the same function).
       (http://search.cpan.org/~nandu/Pod-DocBook-1.2/ <http://search.cpan.org/~nandu/Pod-
       DocBook-1.2/>)

       Jozef Kutej <jkutej@cpan.org> renamed the module to Pod::2::DocBook because Nandus version
       was buried in the CPAN archive as an "UNAUTHORIZED RELEASE".

COPYRIGHT

       Copyright 2004, Nandu Shah <nandu@zvolve.com>

       Copyright 2008, Jozef Kutej <jkutej@cpan.org>

       This library is free software; you may redistribute it and/or modify it under the same
       terms as Perl itself