Provided by: libccrtp-doc_2.0.6-3_all bug

NAME

       RTPDataQueue -

       A packet queue handler for building different kinds of RTP protocol systems.

SYNOPSIS

       #include <ioqueue.h>

       Inherits IncomingDataQueue, and OutgoingDataQueue.

       Inherited by QueueRTCPManager, and RTPDuplex.

   Public Types
       enum Tos { tosBestEffort, tosEnhanced }
           rtp.h cc++/rtp.h

   Public Member Functions
       void setTypeOfService (Tos tos)
           Specify the kind of service the application expects to use.
       void enableStack ()
           Enable packet queue processing in the stack.
       void disableStack ()
           Disable packet queue processing in the stack.
       bool isActive () const
           Get active connection state flag.
       uint32 getCurrentTimestamp () const
           Get the timestamp that should be given for a packet whose payload sampling instant
           corresponds to the current system time.
       void setSessionBandwidth (uint32 bw)
           Specify the bandwidth of the current session.
       uint32 getDefaultSessionBandwidth () const
       uint32 getSessionBandwidth () const
       void setTimeclock ()
           Set the packet timeclock for synchronizing timestamps.
       timeout_t getTimeclock () const
           Get the packet timeclock for synchronizing timestamps.

   Protected Member Functions
       RTPDataQueue (uint32 size=defaultMembersHashSize)
           Constructor.
       RTPDataQueue (uint32 *ssrc, uint32 size=defaultMembersHashSize)
           Using this constructor you can start a session with the given ssrc, instead of the
           usual randomly generated one.
       virtual ~RTPDataQueue ()
           The queue destructor flushes the queue and stops all services.
       virtual void timerTick ()
           A plugin point for timer tick driven events.
       void renewLocalSSRC ()
       void endQueue ()
           This method ends the queue.
       virtual bool isPendingData (microtimeout_t timeout)=0
           This function is used to check for and schedule against arriving packets based on the
           derived connection type.

   Additional Inherited Members

Detailed Description

       A packet queue handler for building different kinds of RTP protocol systems.

       The queue manages both incoming and outgoing RTP packets, as well as synchronization and
       transmission/reception timers. By making the queue handler a seperate base class it
       becomes possible to define RTP classes for RTP profiles and sessions of different types.

       Outgoing packets are sent via the OutgoingDataQueue::putData method.

       Incoming packets can be retrieved via IncomingDataQueue::getData method.

       Author:
           David Sugar dyfet@ostel.com RTP data queue handler.

Member Enumeration Documentation

   enum RTPDataQueue::Tos
       rtp.h cc++/rtp.h Type of network service the application uses.

       If the application uses enhanced network service, for instance Integrated Services or
       Differentiated Services, it has not to ensure fair competition with TCP, provided that the
       requested service is actually being delivered. Whenever the application uses best-effort
       service or the requested enhanced service is not actually being delivered, it has to
       ensure fair competition with TCP. By default, best-effot is assumed.

       Note:
           Although not required, RTP packets are always sent on top of UDP segments. No other
           underlying transport protocol is supported at present.

       Enumerator

       tosBestEffort
              Best-effort network service.

       tosEnhanced
              Enhanced network service.

Constructor & Destructor Documentation

   RTPDataQueue::RTPDataQueue (uint32size = defaultMembersHashSize) [protected]
       Constructor. This will generate a random application SSRC identifier.

       Parameters:
           size an estimation of the number of participants in the session

   RTPDataQueue::RTPDataQueue (uint32 *ssrc, uint32size = defaultMembersHashSize) [protected]
       Using this constructor you can start a session with the given ssrc, instead of the usual
       randomly generated one. This is necessary when you need to initiate several sessions
       having the same SSRC identifier, for instance, to implement layered encoding, in which
       case each layer is managed through a different session but all sessions share the same
       SSRC identifier.

       Warning:
           This doesn't seem to be a good solution

       Parameters:
           ssrc Synchronization SouRCe identifier for this session
           size an estimation of the number of participants in the session

   virtual RTPDataQueue::~RTPDataQueue () [inline],  [protected],  [virtual]
       The queue destructor flushes the queue and stops all services.

Member Function Documentation

   void RTPDataQueue::disableStack () [inline]
       Disable packet queue processing in the stack.

   void RTPDataQueue::enableStack () [inline]
       Enable packet queue processing in the stack. This method will not any thread of execution.

   void RTPDataQueue::endQueue () [protected]
       This method ends the queue.

   uint32 RTPDataQueue::getCurrentTimestamp () const
       Get the timestamp that should be given for a packet whose payload sampling instant
       corresponds to the current system time. The timestamp applications should provide for each
       packet represents the sampling instant of its payload and should not be a reading of the
       system clock. Nevertheless, the internal operation of the RTP stack relies on the accuracy
       of the provided timestamp, since several computations assume that there is a certain
       degree of correspondence between the timestamp and the system clock.

       It is recommended that applications use this method in order to periodically adjust the
       RTP timestamp.

       In particular, it is advisable getting the timestamp corresponding to the first sampling
       instant or any instant after a period of inactivity through a call to this method.

       Applications should use the nominal sampling or any other value provided by the coder in
       order to compute the next timestamps with minimum computational requirement.

       For instance, an application using an RTP profile that specifies a fixed sampling rate of
       8 Khz with eight bits per sample, continuously transmitting audio blocks 80 octets long,
       would transmit 100 packets every second. Every packet would carry a timestamp 80 units
       greater than the previous one. So, the first timestamp would be obtained from this method,
       whereas the following ones would be computed adding 80 every time. Also the timestamp
       should be increased for every block whether it is put in the queue or dropped.

       The aforementioned increment can be obtained from the
       RTPDataQueue::getTimestampIncrement() method rather than computing it by hand in the
       application.

       Note:
           Frame based applications must follow a specific timestamping method, probably
           specified in a profile.

           You should take into account that by default ccRTP assumes that the application begins
           sampling at the queue creation time. Moreover, the first sampling instant is assigned
           a 'user visible' timestamp of 0, although the RTP stack will then add internally a
           ramdom offset unknown to the application. That is to say, the application may count
           samples from 0 in order to get the timestamp for the next packet, provided that the
           first sampling instant is the same as the queue creation time. Nevertheless, this
           simpler way of starting will not be as accurate as it would be if the application got
           at least the first timestamp through getCurrentTimestamp. We provide this option since
           ccRTP interface is evolving, but we admit that it is ugly, we could remove this option
           or even replace uint32 timestamps with a restrictively regulated object; suggestions
           are gladly welcomed

   uint32 RTPDataQueue::getDefaultSessionBandwidth () const [inline]
   uint32 RTPDataQueue::getSessionBandwidth () const [inline]
   timeout_t RTPDataQueue::getTimeclock () const [inline]
       Get the packet timeclock for synchronizing timestamps.

       Returns:
           runtime in milliseconds since last set.

   bool RTPDataQueue::isActive () const [inline]
       Get active connection state flag.

       Returns:
           true if connection 'active'.

   virtual bool RTPDataQueue::isPendingData (microtimeout_ttimeout) [protected],  [pure virtual]
       This function is used to check for and schedule against arriving packets based on the
       derived connection type.

       Returns:
           true if packet waiting for processing.

       Parameters:
           number of microseconds to wait.

       Implemented in RTPDuplex.

   void RTPDataQueue::renewLocalSSRC () [inline],  [protected],  [virtual]
       Reimplemented from RTPQueueBase.

   void RTPDataQueue::setSessionBandwidth (uint32bw) [inline]
       Specify the bandwidth of the current session.

       Parameters:
           bw bandwidth of the current session, in bits/s.

       See Also:
           AVPQueue::setControlBandwidth()

   void RTPDataQueue::setTimeclock () [inline]
       Set the packet timeclock for synchronizing timestamps.

   void RTPDataQueue::setTypeOfService (Tostos) [inline]
       Specify the kind of service the application expects to use.

       Parameters:
           tos type of service the application expects to use

       Note:
           If enhanced service is specified but packet loss is high (the requested service does
           not appear to actually be delivered) ccRTP defaults to best-effort suitable behaviour:
           guarantee fair competition with TCP.

   virtual void RTPDataQueue::timerTick () [inline],  [protected],  [virtual]
       A plugin point for timer tick driven events.

Author

       Generated automatically by Doxygen for ccRTP from the source code.