Provided by: libsnmp-info-perl_3.11-1_all bug

NAME

       SNMP::Info::Layer2::HP - SNMP Interface to HP Procurve Switches

AUTHOR

       Max Baker

SYNOPSIS

        # Let SNMP::Info determine the correct subclass for you.
        my $hp = new SNMP::Info(
                                 AutoSpecify => 1,
                                 Debug       => 1,
                                 DestHost    => 'myswitch',
                                 Community   => 'public',
                                 Version     => 2
                               )
           or die "Can't connect to DestHost.\n";

        my $class      = $hp->class();
        print "SNMP::Info determined this device to fall under subclass : $class\n";

DESCRIPTION

       Provides abstraction to the configuration information obtainable from a HP ProCurve Switch
       via SNMP.

       Note:  Some HP Switches will connect via SNMP version 1, but a lot of config data will not
       be available.  Make sure you try and connect with Version 2 first, and then fail back to
       version 1.

       For speed or debugging purposes you can call the subclass directly, but not after
       determining a more specific class using the method above.

        my $hp = new SNMP::Info::Layer2::HP(...);

   Inherited Classes
       SNMP::Info::Layer2
       SNMP::Info::LLDP
       SNMP::Info::MAU

   Required MIBs
       RFC1271-MIB
           Included in V2 mibs from Cisco

       HP-ICF-OID
           (this MIB new with SNMP::Info 0.8)

       STATISTICS-MIB
       NETSWITCH-MIB
       CONFIG-MIB
       HP-ICF-BRIDGE
       HP-ICF-POE-MIB

       The last four MIBs listed are from HP and can be found at <http://www.hp.com/rnd/software>
       or <http://www.hp.com/rnd/software/MIBs.htm>

Change Log

       Version 0.4 - Removed ENTITY-MIB e_*() methods to separate sub-class - SNMP::Info::Entity

GLOBALS

       These are methods that return scalar value from SNMP

       $hp->cpu()
           Returns CPU Utilization in percentage.

       $hp->log()
           Returns all the log entries from the switch's log that are not Link up or down
           messages.

       $hp->mem_free()
           Returns bytes of free memory

       $hp->mem_total()
           Return bytes of total memory

       $hp->mem_used()
           Returns bytes of used memory

       $hp->model()
           Returns the model number of the HP Switch.  Will translate between the HP Part number
           and the common model number with this map :

            %MODEL_MAP = (
               'J8131A' => 'WAP-420-WW',
               'J8130A' => 'WAP-420-NA',
               'J8133A' => 'AP520WL',
               'J8680A' => '9408sl',
               'J9091A' => '8212zl',
               'J9475A' => '8206zl',
               'J9265A' => '6600ml-24XG',
               'J9264A' => '6600ml-24G-4XG',
               'J9263A' => '6600ml-24G',
               'J9452A' => '6600-48G-4XG',
               'J9451A' => '6600-48G',
               'J8474A' => '6410cl-6XG',
               'J8433A' => '6400cl-6XG',
               'J8992A' => '6200yl-24G',
               'J4902A' => '6108',
               'J8698A' => '5412zl',
               'J8719A' => '5408yl',
               'J8697A' => '5406zl',
               'J8718A' => '5404yl',
               'J4819A' => '5308XL',
               'J4850A' => '5304XL',
               'J8773A' => '4208vl',
               'J8770A' => '4204vl',
               'J8772A' => '4202vl-72',
               'J9032A' => '4202vl-68G',
               'J9031A' => '4202vl-68',
               'J8771A' => '4202vl-48G',
               'J4865A' => '4108GL',
               'J4887A' => '4104GL',
               'J9588A' => '3800-48G-PoE+-4XG',
               'J9574A' => '3800-48G-PoE+-4SFP+',
               'J9586A' => '3800-48G-4XG',
               'J9576A' => '3800-48G-4SFP+',
               'J9584A' => '3800-24SFP-2SFP+',
               'J9587A' => '3800-24G-PoE+-2XG',
               'J9573A' => '3800-24G-PoE+-2SFP+',
               'J9585A' => '3800-24G-2XG',
               'J9575A' => '3800-24G-2SFP+',
               'J8693A' => '3500yl-48G-PWR',
               'J8692A' => '3500yl-24G-PWR',
               'J9473A' => '3500-48-PoE',
               'J9472A' => '3500-48',
               'J9471A' => '3500-24-PoE',
               'J9470A' => '3500-24',
               'J4906A' => '3400cl-48G',
               'J4905A' => '3400cl-24G',
               'J4815A' => '3324XL',
               'J4851A' => '3124',
               'J9562A' => '2915-8G-PoE',
               'J9148A' => '2910al-48G-PoE+',
               'J9147A' => '2910al-48G',
               'J9146A' => '2910al-24G-PoE+',
               'J9145A' => '2910al-24G',
               'J9050A' => '2900-48G',
               'J9049A' => '2900-24G',
               'J4904A' => '2848',
               'J4903A' => '2824',
               'J9022A' => '2810-48G',
               'J9021A' => '2810-24G',
               'J8165A' => '2650-PWR',
               'J4899B' => '2650-CR',
               'J4899C' => '2650C',
               'J4899A' => '2650',
               'J8164A' => '2626-PWR',
               'J4900B' => '2626-CR',
               'J4900C' => '2626C',
               'J4900A' => '2626',
               'J9627A' => '2620-48-PoE+',
               'J9626A' => '2620-48',
               'J9624A' => '2620-24-PPoE+',
               'J9625A' => '2620-24-PoE+',
               'J9623A' => '2620-24',
               'J9565A' => '2615-8-PoE',
               'J9089A' => '2610-48-PWR',
               'J9088A' => '2610-48',
               'J9087A' => '2610-24-PWR',
               'J9086A' => '2610-24/12PWR',
               'J9085A' => '2610-24',
               'J8762A' => '2600-8-PWR',
               'J4813A' => '2524',
               'J9298A' => '2520G-8-PoE',
               'J9299A' => '2520G-24-PoE',
               'J9137A' => '2520-8-PoE',
               'J9138A' => '2520-24-PoE',
               'J4812A' => '2512',
               'J9280A' => '2510G-48',
               'J9279A' => '2510G-24',
               'J9020A' => '2510-48A',
               'J9019B' => '2510-24B',
               'J9019A' => '2510-24A',
               'J4818A' => '2324',
               'J4817A' => '2312',
               'J9449A' => '1810G-8',
               'J9450A' => '1810G-24',
               'J9029A' => '1800-8G',
               'J9028A' => '1800-24G',
            );

       $hp->os()
           Returns hp

       $hp->os_bin()
           "hpSwitchRomVersion.0"

       $hp->os_ver()
           Tries to use os_version() and if that fails will try and cull the version from the
           description field.

       $hp->os_version()
           "hpSwitchOsVersion.0"

       $hp->serial()
           Returns serial number if available through SNMP

       $hp->slots()
           Returns number of entries in $hp->e_name that have 'slot' in them.

       $hp->vendor()
           hp

       $hp->fan()
           Returns fan status

       $hp->ps1_status()
           Power supply 1 status

       $hp->ps2_status()
           Power supply 2 status

       $hp->peth_port_power()
           Power supplied by PoE ports, in milliwatts ("hpicfPoePethPsePortPower")

       $hp->stp_ver()
           Returns what version of STP the device is running.  ("hpicfBridgeRstpForceVersion"
           with fallback to inherited stp_ver())

   Globals imported from SNMP::Info::Layer2
       See documentation in "GLOBALS" in SNMP::Info::Layer2 for details.

   Globals imported from SNMP::Info::LLDP
       See documentation in "GLOBALS" in SNMP::Info::LLDP for details.

   Globals imported from SNMP::Info::MAU
       See documentation in "GLOBALS" in SNMP::Info::MAU for details.

TABLE METHODS

       These are methods that return tables of information in the form of a reference to a hash.

   Overrides
       $hp->interfaces()
           Uses $hp->i_description()

       $hp->i_duplex()
           Returns reference to map of IIDs to current link duplex.

       $hp->i_duplex_admin()
           Returns reference to hash of IIDs to admin duplex setting.

       $hp->vendor_i_type()
           Returns reference to hash of IIDs to HP specific port type ("hpSwitchPortType").

       $hp->i_name()
           Crosses i_name() with $hp->e_name() using $hp->e_port() and i_alias()

       $hp->peth_port_ifindex()
           Returns reference to hash of power Ethernet port table entries map back to interface
           index (c<ifIndex>)

   Table Methods imported from SNMP::Info::Layer2
       See documentation in "TABLE METHODS" in SNMP::Info::Layer2 for details.

   Table Methods imported from SNMP::Info::LLDP
       See documentation in "TABLE METHODS" in SNMP::Info::LLDP for details.

   Table Methods imported from SNMP::Info::MAU
       See documentation in "TABLE METHODS" in SNMP::Info::MAU for details.

MUNGES

       munge_hp_c_id()
           Munge for c_id which handles CDP and LLDP.

SET METHODS

       These are methods that provide SNMP set functionality for overridden methods or provide a
       simpler interface to complex set operations.  See "SETTING DATA VIA SNMP" in SNMP::Info
       for general information on set operations.

       set_i_vlan()
       set_i_vlan_tagged()