Provided by: libsys-filesystem-perl_1.405-1_all bug

NAME

       Sys::Filesystem - Retrieve list of filesystems and their properties

SYNOPSIS

           use strict;
           use Sys::Filesystem ();

           # Method 1
           my $fs = Sys::Filesystem->new();
           my @filesystems = $fs->filesystems();
           for (@filesystems)
           {
               printf("%s is a %s filesystem mounted on %s\n",
                                 $fs->mount_point($_),
                                 $fs->format($_),
                                 $fs->device($_)
                          );
           }

           # Method 2
           my $weird_fs = Sys::Filesystem->new(
                                 fstab => '/etc/weird/vfstab.conf',
                                 mtab  => '/etc/active_mounts',
                                 xtab  => '/etc/nfs/mounts'
                           );
           my @weird_filesystems = $weird_fs->filesystems();

           # Method 3 (nice but naughty)
           my @filesystems = Sys::Filesystem->filesystems();

DESCRIPTION

       Sys::Filesystem is intended to be a portable interface to list and query filesystem names
       and their properties. At the time of writing there were only Solaris and Win32 modules
       available on CPAN to perform this kind of operation.  This module hopes to provide a
       consistent API to list all, mounted, unmounted and special filesystems on a system, and
       query as many properties as possible with common aliases wherever possible.

INHERITANCE

         Sys::Filesystem
         ISA UNIVERSAL

METHODS

       new Creates a new Sys::Filesystem object. new() accepts 3 optional key pair values to help
           or force where mount information is gathered from. These values are not otherwise
           defaulted by the main Sys::Filesystem object, but left to the platform specific helper
           modules to determine as an exercise of common sense.

           fstab
               Specify the full path and filename of the filesystem table (or fstab for short).

           mtab
               Specify the full path and filename of the mounted filesystem table (or mtab for
               short). Not all platforms have such a file and so this option may be ignored on
               some systems.

           xtab
               Specify the full path and filename of the mounted NFS filesystem table (or xtab
               for short). This is usually only pertinant to Unix bases systems.  Not all helper
               modules will query NFS mounts as a separate exercise, and therefore this option
               may be ignored on some systems.

       supported
           Returns true if the operating system is supported by Sys::Filesystem.  Unsupported
           operating systems may get less information, e.g. the mount state couldn't determined
           or which file system type is special ins't known.

   Listing Filesystems
       filesystems()
           Returns a list of all filesystem. May accept an optional list of key pair values in
           order to filter/restrict the results which are returned. The restrictions are
           evaluated to match as much as possible, so asking for regular and special file system
           (or mounted and special file systems), you'll get all.

           For better understanding, please imagine the parameters like:

             @fslist = $fs->filesystems( mounted => 1, special => 1 );
             # results similar as
             SELECT mountpoint FROM filesystems WHERE mounted = 1 OR special = 1

           If you need other selection choices, please take a look at DBD::Sys.

           Valid values are as follows:

           device => "string"
               Returns only filesystems that are mounted using the device of "string".  For
               example:

                   my $fdd_filesytem = Sys::Filesystem->filesystems(device => "/dev/fd0");

           mounted => 1
               Returns only filesystems which can be confirmed as actively mounted.  (Filesystems
               which are mounted).

               The mounted_filesystems() method is an alias for this syntax.

           unmounted => 1
               Returns only filesystems which cannot be confirmed as actively mounted.
               (Filesystems which are not mounted).

               The unmounted_filesystems() method is an alias for this syntax.

           special => 1
               Returns only filesystems which are regarded as special in some way. A filesystem
               is marked as special by the operating specific helper module. For example, a tmpfs
               type filesystem on one operating system might be regarded as a special filesystem,
               but not on others. Consult the documentation of the operating system specific
               helper module for further information about your system. (Sys::Filesystem::Linux
               for Linux or Sys::Filesystem::Solaris for Solaris etc).

               This parameter is mutually exclusive to "regular".

               The special_filesystems() method is an alias for this syntax.

           regular => 1
               Returns only fileystems which are not regarded as special. (Normal filesystems).

               This parameter is mutually exclusive to "special".

               The regular_filesystems() method is an alias for this syntax.

       mounted_filesystems()
           Returns a list of all filesystems which can be verified as currently being mounted.

       unmounted_filesystems()
           Returns a list of all filesystems which cannot be verified as currently being mounted.

       special_filesystems()
           Returns a list of all fileystems which are considered special. This will usually
           contain meta and swap partitions like /proc and /dev/shm on Linux.

       regular_filesystems()
           Returns a list of all filesystems which are not considered to be special.

   Filesystem Properties
       Available filesystem properties and their names vary wildly between platforms.  Common
       aliases have been provided wherever possible. You should check the documentation of the
       specific platform helper module to list all of the properties which are available for that
       platform. For example, read the Sys::Filesystem::Linux documentation for a list of all
       filesystem properties available to query under Linux.

       mount_point() or filesystem()
           Returns the friendly name of the filesystem. This will usually be the same name as
           appears in the list returned by the filesystems() method.

       mounted()
           Returns boolean true if the filesystem is mounted.

       label()
           Returns the fileystem label.

           This functionality may need to be retrofitted to some original OS specific helper
           modules as of Sys::Filesystem 1.12.

       volume()
           Returns the volume that the filesystem belongs to or is mounted on.

           This functionality may need to be retrofitted to some original OS specific helper
           modules as of Sys::Filesystem 1.12.

       device()
           Returns the physical device that the filesystem is connected to.

       special()
           Returns boolean true if the filesystem type is considered "special".

       type() or format()
           Returns the type of filesystem format. fat32, ntfs, ufs, hpfs, ext3, xfs etc.

       options()
           Returns the options that the filesystem was mounted with. This may commonly contain
           information such as read-write, user and group settings and permissions.

       mount_order()
           Returns the order in which this filesystem should be mounted on boot.

       check_order()
           Returns the order in which this filesystem should be consistency checked on boot.

       check_frequency()
           Returns how often this filesystem is checked for consistency.

OS SPECIFIC HELPER MODULES

   Dummy
       The Dummy module is there to provide a default failover result to the main Sys::Filesystem
       module if no suitable platform specific module can be found or successfully loaded. This
       is the last module to be tried, in order of platform, Unix (if not on Win32), and then
       Dummy.

   Unix
       The Unix module is intended to provide a "best guess" failover result to the main
       Sys::Filesystem module if no suitable platform specific module can be found, and the
       platform is not 'MSWin32'.

       This module requires additional work to improve it's guestimation abilities.

   Darwin
       First written by Christian Renz <crenz@web42.com>.

   Win32
       Provides "mount_point" and "device" of mounted filesystems on Windows.

   AIX
       Please be aware that the AIX /etc/filesystems file has both a "type" and "vfs" field. The
       "type" field should not be confused with the filesystem format/type (that is stored in the
       "vfs" field). You may wish to use the "format" field when querying for filesystem types,
       since it is aliased to be more reliable accross different platforms.

   Other
       Linux, Solaris, Cygwin, FreeBSD, NetBSD, HP-UX.

   OS Identifiers
       The following list is taken from perlport. Please refer to the original source for the
       most up to date version. This information should help anyone who wishes to write a helper
       module for a new platform. Modules should have the same name as ^O in title caps. Thus
       'openbsd' becomes 'Openbsd.pm'.

REQUIREMENTS

       Sys::Filesystem requires Perl >= 5.6 to run.

TODO

       Add support for Tru64, MidnightBSD, Haiku, Minix, DragonflyBSD and OpenBSD.  Please
       contact me if you would like to provide code for these operating systems.

SUPPORT

       You can find documentation for this module with the perldoc command.

           perldoc Sys::Filesystem

       You can also look for information at:

       •   RT: CPAN's request tracker

           <http://rt.cpan.org/NoAuth/Bugs.html?Dist=Sys-Filesystem>

       •   AnnoCPAN: Annotated CPAN documentation

           <http://annocpan.org/dist/Sys-Filesystem>

       •   CPAN Ratings

           <http://cpanratings.perl.org/s/Sys-Filesystem>

       •   Search CPAN

           <http://search.cpan.org/dist/Sys-Filesystem/>

SEE ALSO

       perlport, Solaris::DeviceTree, Win32::DriveInfo

VERSION

       $Id$

AUTHOR

       Nicola Worthington <nicolaw@cpan.org> - <http://perlgirl.org.uk>

       Jens Rehsack <rehsack@cpan.org> - <http://www.rehsack.de/>

ACKNOWLEDGEMENTS

       See CREDITS in the distribution tarball.

COPYRIGHT

       Copyright 2004,2005,2006 Nicola Worthington.

       Copyright 2008-2013 Jens Rehsack.

       This software is licensed under The Apache Software License, Version 2.0.

       <http://www.apache.org/licenses/LICENSE-2.0>