Provided by: libsys-mmap-perl_0.16-1build2_amd64 bug

NAME

       Sys::Mmap - uses mmap to map in a file as a Perl variable

SYNOPSIS

           use Sys::Mmap;

           new Mmap $str, 8192, 'structtest2.pl' or die $!;
           new Mmap $var, 8192 or die $!;

           mmap($foo, 0, PROT_READ, MAP_SHARED, FILEHANDLE) or die "mmap: $!";
           @tags = $foo =~ /<(.*?)>/g;
           munmap($foo) or die "munmap: $!";

           mmap($bar, 8192, PROT_READ|PROT_WRITE, MAP_SHARED, FILEHANDLE);
           substr($bar, 1024, 11) = "Hello world";

           mmap($baz, 8192, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_ANON, STDOUT);

           $addr = mmap($baz, 8192, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_ANON, STDOUT);
           Sys::Mmap::hardwire($qux, $addr, 8192);

DESCRIPTION

       The Mmap module uses the POSIX mmap call to map in a file as a Perl variable.  Memory
       access by mmap may be shared between threads or forked processes, and may be a disc file
       that has been mapped into memory.  Sys::Mmap depends on your operating system supporting
       UNIX or POSIX.1b mmap, of course.

       Note that PerlIO now defines a ":mmap" tag and presents mmap'd files as regular files, if
       that is your cup of joe.

       Several processes may share one copy of the file or string, saving memory, and
       concurrently making changes to portions of the file or string. When not used with a file,
       it is an alternative to SysV shared memory. Unlike SysV shared memory, there are no
       arbitrary size limits on the shared memory area, and sparce memory usage is handled
       optimally on most modern UNIX implementations.

       Using the "new()" method provides a "tie()"'d interface to "mmap()" that allows you to use
       the variable as a normal variable. If a filename is provided, the file is opened and
       mapped in. If the file is smaller than the length provided, the file is grown to that
       length.  If no filename is provided, anonymous shared inheritable memory is used.
       Assigning to the variable will replace a section in the file corresponding to the length
       of the variable, leaving the remainder of the file intact and unmodified. Using "substr()"
       allows you to access the file at an offset, and does not place any requirements on the
       length argument to substr() or the length of the variable being inserted, provided it does
       not exceed the length of the memory region. This protects you from the pathological cases
       involved in using "mmap()" directly, documented below.

       When calling "mmap()" or "hardwire()" directly, you need to be careful how you use the
       variable. Some programming constructs may create copies of a string which, while
       unimportant for smallish strings, are far less welcome if you're mapping in a file which
       is a few gigabytes big. If you use PROT_WRITE and attempt to write to the file via the
       variable you need to be even more careful. One of the few ways in which you can safely
       write to the string in-place is by using "substr()" as an lvalue and ensuring that the
       part of the string that you replace is exactly the same length.  Other functions will
       allocate other storage for the variable, and it will no longer overlay the mapped in file.

       new Mmap VARIABLE, LENGTH, OPTIONALFILENAME
           Maps LENGTH bytes of (the contents of) OPTIONALFILENAME if OPTINALFILENAME is
           provided, otherwise uses anonymous, shared inheritable memory. This memory region is
           inherited by any "fork()"ed children. VARIABLE will now refer to the contents of that
           file.  Any change to VARIABLE will make an identical change to the file.  If LENGTH is
           zero and a file is specified, the current length of the file will be used.  If LENGTH
           is larger then the file, and OPTIONALFILENAME is provided, the file is grown to that
           length before being mapped.  This is the preferred interface, as it requires much less
           caution in handling the variable. VARIABLE will be tied into the "Mmap" package, and
           "mmap()" will be called for you.

           Assigning to VARIABLE will overwrite the beginning of the file for a length of the
           value being assigned in. The rest of the file or memory region after that point will
           be left intact.  You may use substr() to assign at a given position:

           substr(VARIABLE, POSITION, LENGTH) = NEWVALUE

       mmap(VARIABLE, LENGTH, PROTECTION, FLAGS, FILEHANDLE, OFFSET)
           Maps LENGTH bytes of (the underlying contents of) FILEHANDLE into your address space,
           starting at offset OFFSET and makes VARIABLE refer to that memory. The OFFSET argument
           can be omitted in which case it defaults to zero. The LENGTH argument can be zero in
           which case a stat is done on FILEHANDLE and the size of the underlying file is used
           instead.

           The PROTECTION argument should be some ORed combination of the constants PROT_READ,
           PROT_WRITE and PROT_EXEC or else PROT_NONE. The constants PROT_EXEC and PROT_NONE are
           unlikely to be useful here but are included for completeness.

           The FLAGS argument must include either MAP_SHARED or MAP_PRIVATE (the latter is
           unlikely to be useful here).  If your platform supports it, you may also use MAP_ANON
           or MAP_ANONYMOUS.  If your platform supplies MAP_FILE as a non-zero constant
           (necessarily non-POSIX) then you should also include that in FLAGS. POSIX.1b does not
           specify MAP_FILE as a FLAG argument and most if not all versions of Unix have MAP_FILE
           as zero.

           mmap returns undef on failure, and the address in memory where the variable was mapped
           to on success.

       munmap(VARIABLE)
           Unmaps the part of your address space which was previously mapped in with a call to
           "mmap(VARIABLE, ...)" and makes VARIABLE become undefined.

           munmap returns 1 on success and undef on failure.

       hardwire(VARIABLE, ADDRESS, LENGTH)
           Specifies the address in memory of a variable, possibly within a region you've
           "mmap()"ed another variable to. You must use the same percaustions to keep the
           variable from being reallocated, and use "substr()" with an exact length. If you
           "munmap()" a region that a "hardwire()"ed variable lives in, the "hardwire()"ed
           variable will not automatically be "undef"ed. You must do this manually.

       Constants
           The Mmap module exports the following constants into your namespace
               MAP_SHARED MAP_PRIVATE MAP_ANON MAP_ANONYMOUS MAP_FILE
               PROT_EXEC PROT_NONE PROT_READ PROT_WRITE

           Of the constants beginning MAP_, only MAP_SHARED and MAP_PRIVATE are defined in
           POSIX.1b and only MAP_SHARED is likely to be useful.

BUGS

       Scott Walters doesn't know XS, and is just winging it. There must be a better way to tell
       Perl not to reallocate a variable in memory...

       The tie() interface makes writing to a substring of the variable much less efficient.  One
       user cited his application running 10-20 times slower when "new Mmap" is used than when
       mmap() is called directly.

       Malcolm Beattie has not reviewed Scott's work and is not responsible for any bugs, errors,
       omissions, stylistic failings, importabilities, or design flaws in this version of the
       code.

       There should be a tied interface to hardwire() as well.

       Scott Walter's spelling is awful.

       hardwire() will segfault Perl if the mmap() area it was refering to is munmap()'d out from
       under it.

       munmap() will segfault Perl if the variable was not successfully mmap()'d previously, or
       if it has since been reallocated by Perl.

AUTHOR

       Malcolm Beattie, 21 June 1996.

       Updated for Perl 5.6.x, additions, Scott Walters, Feb 2002.

       Aaron Kaplan kindly contributed patches to make the C ANSI compliant and contributed
       documentation as well.