Provided by: perl-doc_5.18.2-2ubuntu1.7_all bug

NAME

       Term::ANSIColor - Color screen output using ANSI escape sequences

SYNOPSIS

           use Term::ANSIColor;
           print color 'bold blue';
           print "This text is bold blue.\n";
           print color 'reset';
           print "This text is normal.\n";
           print colored("Yellow on magenta.", 'yellow on_magenta'), "\n";
           print "This text is normal.\n";
           print colored ['yellow on_magenta'], 'Yellow on magenta.', "\n";
           print colored ['red on_bright_yellow'], 'Red on bright yellow.', "\n";
           print colored ['bright_red on_black'], 'Bright red on black.', "\n";
           print "\n";

           # Map escape sequences back to color names.
           use Term::ANSIColor 1.04 qw(uncolor);
           my $names = uncolor('01;31');
           print join(q{ }, @{$names}), "\n";

           # Strip all color escape sequences.
           use Term::ANSIColor 2.01 qw(colorstrip);
           print colorstrip '\e[1mThis is bold\e[0m', "\n";

           # Determine whether a color is valid.
           use Term::ANSIColor 2.02 qw(colorvalid);
           my $valid = colorvalid('blue bold', 'on_magenta');
           print "Color string is ", $valid ? "valid\n" : "invalid\n";

           # Create new aliases for colors.
           use Term::ANSIColor 4.00 qw(coloralias);
           coloralias('alert', 'red');
           print "Alert is ", coloralias('alert'), "\n";
           print colored("This is in red.", 'alert'), "\n";

           use Term::ANSIColor qw(:constants);
           print BOLD, BLUE, "This text is in bold blue.\n", RESET;

           use Term::ANSIColor qw(:constants);
           {
               local $Term::ANSIColor::AUTORESET = 1;
               print BOLD BLUE "This text is in bold blue.\n";
               print "This text is normal.\n";
           }

           use Term::ANSIColor 2.00 qw(:pushpop);
           print PUSHCOLOR RED ON_GREEN "This text is red on green.\n";
           print PUSHCOLOR BRIGHT_BLUE "This text is bright blue on green.\n";
           print RESET BRIGHT_BLUE "This text is just bright blue.\n";
           print POPCOLOR "Back to red on green.\n";
           print LOCALCOLOR GREEN ON_BLUE "This text is green on blue.\n";
           print "This text is red on green.\n";
           {
               local $Term::ANSIColor::AUTOLOCAL = 1;
               print ON_BLUE "This text is red on blue.\n";
               print "This text is red on green.\n";
           }
           print POPCOLOR "Back to whatever we started as.\n";

DESCRIPTION

       This module has two interfaces, one through color() and colored() and the other through
       constants.  It also offers the utility functions uncolor(), colorstrip(), colorvalid(),
       and coloralias(), which have to be explicitly imported to be used (see "SYNOPSIS").

       See "COMPATIBILITY" for the versions of Term::ANSIColor that introduced particular
       features and the versions of Perl that included them.

   Supported Colors
       Terminal emulators that support color divide into two types: ones that support only eight
       colors, ones that support sixteen, and ones that support 256.  This module provides the
       ANSI escape codes all of them.  These colors are referred to as ANSI colors 0 through 7
       (normal), 8 through 15 (16-color), and 16 through 255 (256-color).

       Unfortunately, interpretation of colors 0 through 7 often depends on whether the emulator
       supports eight colors or sixteen colors.  Emulators that only support eight colors (such
       as the Linux console) will display colors 0 through 7 with normal brightness and ignore
       colors 8 through 15, treating them the same as white.  Emulators that support 16 colors,
       such as gnome-terminal, normally display colors 0 through 7 as dim or darker versions and
       colors 8 through 15 as normal brightness.  On such emulators, the "normal" white (color 7)
       usually is shown as pale grey, requiring bright white (15) to be used to get a real white
       color.  Bright black usually is a dark grey color, although some terminals display it as
       pure black.  Some sixteen-color terminal emulators also treat normal yellow (color 3) as
       orange or brown, and bright yellow (color 11) as yellow.

       Following the normal convention of sixteen-color emulators, this module provides a pair of
       attributes for each color.  For every normal color (0 through 7), the corresponding bright
       color (8 through 15) is obtained by prepending the string "bright_" to the normal color
       name.  For example, "red" is color 1 and "bright_red" is color 9.  The same applies for
       background colors: "on_red" is the normal color and "on_bright_red" is the bright color.
       Capitalize these strings for the constant interface.

       For 256-color emulators, this module additionally provides "ansi0" through "ansi15", which
       are the same as colors 0 through 15 in sixteen-color emulators but use the 256-color
       escape syntax, "grey0" through "grey23" ranging from nearly black to nearly white, and a
       set of RGB colors.  The RGB colors are of the form "rgbRGB" where R, G, and B are numbers
       from 0 to 5 giving the intensity of red, green, and blue.  "on_" variants of all of these
       colors are also provided.  These colors may be ignored completely on non-256-color
       terminals or may be misinterpreted and produce random behavior.  Additional attributes
       such as blink, italic, or bold may not work with the 256-color palette.

       There is unfortunately no way to know whether the current emulator supports more than
       eight colors, which makes the choice of colors difficult.  The most conservative choice is
       to use only the regular colors, which are at least displayed on all emulators.  However,
       they will appear dark in sixteen-color terminal emulators, including most common emulators
       in UNIX X environments.  If you know the display is one of those emulators, you may wish
       to use the bright variants instead.  Even better, offer the user a way to configure the
       colors for a given application to fit their terminal emulator.

   Function Interface
       The function interface uses attribute strings to describe the colors and text attributes
       to assign to text.  The recognized non-color attributes are clear, reset, bold, dark,
       faint, italic, underline, underscore, blink, reverse, and concealed.  Clear and reset
       (reset to default attributes), dark and faint (dim and saturated), and underline and
       underscore are equivalent, so use whichever is the most intuitive to you.

       Note that not all attributes are supported by all terminal types, and some terminals may
       not support any of these sequences.  Dark and faint, italic, blink, and concealed in
       particular are frequently not implemented.

       The recognized normal foreground color attributes (colors 0 to 7) are:

         black  red  green  yellow  blue  magenta  cyan  white

       The corresponding bright foreground color attributes (colors 8 to 15) are:

         bright_black  bright_red      bright_green  bright_yellow
         bright_blue   bright_magenta  bright_cyan   bright_white

       The recognized normal background color attributes (colors 0 to 7) are:

         on_black  on_red      on_green  on yellow
         on_blue   on_magenta  on_cyan   on_white

       The recognized bright background color attributes (colors 8 to 15) are:

         on_bright_black  on_bright_red      on_bright_green  on_bright_yellow
         on_bright_blue   on_bright_magenta  on_bright_cyan   on_bright_white

       For 256-color terminals, the recognized foreground colors are:

         ansi0 .. ansi15
         grey0 .. grey23

       plus "rgbRGB" for R, G, and B values from 0 to 5, such as "rgb000" or "rgb515".
       Similarly, the recognized background colors are:

         on_ansi0 .. on_ansi15
         on_grey0 .. on_grey23

       plus "on_rgbRGB" for for R, G, and B values from 0 to 5.

       For any of the above listed attributes, case is not significant.

       Attributes, once set, last until they are unset (by printing the attribute "clear" or
       "reset").  Be careful to do this, or otherwise your attribute will last after your script
       is done running, and people get very annoyed at having their prompt and typing changed to
       weird colors.

       color(ATTR[, ATTR ...])
           color() takes any number of strings as arguments and considers them to be space-
           separated lists of attributes.  It then forms and returns the escape sequence to set
           those attributes.  It doesn't print it out, just returns it, so you'll have to print
           it yourself if you want to.  This is so that you can save it as a string, pass it to
           something else, send it to a file handle, or do anything else with it that you might
           care to.  color() throws an exception if given an invalid attribute.

       colored(STRING, ATTR[, ATTR ...])
       colored(ATTR-REF, STRING[, STRING...])
           As an aid in resetting colors, colored() takes a scalar as the first argument and any
           number of attribute strings as the second argument and returns the scalar wrapped in
           escape codes so that the attributes will be set as requested before the string and
           reset to normal after the string.  Alternately, you can pass a reference to an array
           as the first argument, and then the contents of that array will be taken as attributes
           and color codes and the remainder of the arguments as text to colorize.

           Normally, colored() just puts attribute codes at the beginning and end of the string,
           but if you set $Term::ANSIColor::EACHLINE to some string, that string will be
           considered the line delimiter and the attribute will be set at the beginning of each
           line of the passed string and reset at the end of each line.  This is often desirable
           if the output contains newlines and you're using background colors, since a background
           color that persists across a newline is often interpreted by the terminal as providing
           the default background color for the next line.  Programs like pagers can also be
           confused by attributes that span lines.  Normally you'll want to set
           $Term::ANSIColor::EACHLINE to "\n" to use this feature.

       uncolor(ESCAPE)
           uncolor() performs the opposite translation as color(), turning escape sequences into
           a list of strings corresponding to the attributes being set by those sequences.

       colorstrip(STRING[, STRING ...])
           colorstrip() removes all color escape sequences from the provided strings, returning
           the modified strings separately in array context or joined together in scalar context.
           Its arguments are not modified.

       colorvalid(ATTR[, ATTR ...])
           colorvalid() takes attribute strings the same as color() and returns true if all
           attributes are known and false otherwise.

       coloralias(ALIAS[, ATTR])
           If ATTR is specified, coloralias() sets up an alias of ALIAS for the standard color
           ATTR.  From that point forward, ALIAS can be passed into color(), colored(), and
           colorvalid() and will have the same meaning as ATTR.  One possible use of this
           facility is to give more meaningful names to the 256-color RGB colors.  Only
           alphanumerics, ".", "_", and "-" are allowed in alias names.

           If ATTR is not specified, coloralias() returns the standard color name to which ALIAS
           is aliased, if any, or undef if ALIAS does not exist.

           This is the same facility used by the ANSI_COLORS_ALIASES environment variable (see
           "ENVIRONMENT" below) but can be used at runtime, not just when the module is loaded.

           Later invocations of coloralias() with the same ALIAS will override earlier aliases.
           There is no way to remove an alias.

           Aliases have no effect on the return value of uncolor().

           WARNING: Aliases are global and affect all callers in the same process.  There is no
           way to set an alias limited to a particular block of code or a particular object.

   Constant Interface
       Alternately, if you import ":constants", you can use the following constants directly:

         CLEAR           RESET             BOLD            DARK
         FAINT           ITALIC            UNDERLINE       UNDERSCORE
         BLINK           REVERSE           CONCEALED

         BLACK           RED               GREEN           YELLOW
         BLUE            MAGENTA           CYAN            WHITE
         BRIGHT_BLACK    BRIGHT_RED        BRIGHT_GREEN    BRIGHT_YELLOW
         BRIGHT_BLUE     BRIGHT_MAGENTA    BRIGHT_CYAN     BRIGHT_WHITE

         ON_BLACK        ON_RED            ON_GREEN        ON_YELLOW
         ON_BLUE         ON_MAGENTA        ON_CYAN         ON_WHITE
         ON_BRIGHT_BLACK ON_BRIGHT_RED     ON_BRIGHT_GREEN ON_BRIGHT_YELLOW
         ON_BRIGHT_BLUE  ON_BRIGHT_MAGENTA ON_BRIGHT_CYAN  ON_BRIGHT_WHITE

       These are the same as color('attribute') and can be used if you prefer typing:

           print BOLD BLUE ON_WHITE "Text", RESET, "\n";

       to

           print colored ("Text", 'bold blue on_white'), "\n";

       (Note that the newline is kept separate to avoid confusing the terminal as described above
       since a background color is being used.)

       If you import ":constants256", you can use the following constants directly:

         ANSI0 .. ANSI15
         GREY0 .. GREY23

         RGBXYZ (for X, Y, and Z values from 0 to 5, like RGB000 or RGB515)

         ON_ANSI0 .. ON_ANSI15
         ON_GREY0 .. ON_GREY23

         ON_RGBXYZ (for X, Y, and Z values from 0 to 5)

       Note that ":constants256" does not include the other constants, so if you want to mix
       both, you need to include ":constants" as well.  You may want to explicitly import at
       least "RESET", as in:

           use Term::ANSIColor 4.00 qw(RESET :constants256);

       When using the constants, if you don't want to have to remember to add the ", RESET" at
       the end of each print line, you can set $Term::ANSIColor::AUTORESET to a true value.
       Then, the display mode will automatically be reset if there is no comma after the
       constant.  In other words, with that variable set:

           print BOLD BLUE "Text\n";

       will reset the display mode afterward, whereas:

           print BOLD, BLUE, "Text\n";

       will not.  If you are using background colors, you will probably want to either use say()
       (in newer versions of Perl) or print the newline with a separate print statement to avoid
       confusing the terminal.

       If $Term::ANSIColor::AUTOLOCAL is set (see below), it takes precedence over
       $Term::ANSIColor::AUTORESET, and the latter is ignored.

       The subroutine interface has the advantage over the constants interface in that only two
       subroutines are exported into your namespace, versus thirty-eight in the constants
       interface.  On the flip side, the constants interface has the advantage of better compile
       time error checking, since misspelled names of colors or attributes in calls to color()
       and colored() won't be caught until runtime whereas misspelled names of constants will be
       caught at compile time.  So, pollute your namespace with almost two dozen subroutines that
       you may not even use that often, or risk a silly bug by mistyping an attribute.  Your
       choice, TMTOWTDI after all.

   The Color Stack
       You can import ":pushpop" and maintain a stack of colors using PUSHCOLOR, POPCOLOR, and
       LOCALCOLOR.  PUSHCOLOR takes the attribute string that starts its argument and pushes it
       onto a stack of attributes.  POPCOLOR removes the top of the stack and restores the
       previous attributes set by the argument of a prior PUSHCOLOR.  LOCALCOLOR surrounds its
       argument in a PUSHCOLOR and POPCOLOR so that the color resets afterward.

       If $Term::ANSIColor::AUTOLOCAL is set, each sequence of color constants will be implicitly
       preceded by LOCALCOLOR.  In other words, the following:

           {
               local $Term::ANSIColor::AUTOLOCAL = 1;
               print BLUE "Text\n";
           }

       is equivalent to:

           print LOCALCOLOR BLUE "Text\n";

       If $Term::ANSIColor::AUTOLOCAL is set, it takes precedence over
       $Term::ANSIColor::AUTORESET, and the latter is ignored.

       When using PUSHCOLOR, POPCOLOR, and LOCALCOLOR, it's particularly important to not put
       commas between the constants.

           print PUSHCOLOR BLUE "Text\n";

       will correctly push BLUE onto the top of the stack.

           print PUSHCOLOR, BLUE, "Text\n";    # wrong!

       will not, and a subsequent pop won't restore the correct attributes.  PUSHCOLOR pushes the
       attributes set by its argument, which is normally a string of color constants.  It can't
       ask the terminal what the current attributes are.

DIAGNOSTICS

       Bad color mapping %s
           (W) The specified color mapping from ANSI_COLORS_ALIASES is not valid and could not be
           parsed.  It was ignored.

       Bad escape sequence %s
           (F) You passed an invalid ANSI escape sequence to uncolor().

       Bareword "%s" not allowed while "strict subs" in use
           (F) You probably mistyped a constant color name such as:

               $Foobar = FOOBAR . "This line should be blue\n";

           or:

               @Foobar = FOOBAR, "This line should be blue\n";

           This will only show up under use strict (another good reason to run under use strict).

       Cannot alias standard color %s
           (F) The alias name passed to coloralias() matches a standard color name.  Standard
           color names cannot be aliased.

       Cannot alias standard color %s in %s
           (W) The same, but in ANSI_COLORS_ALIASES.  The color mapping was ignored.

       Invalid alias name %s
           (F) You passed an invalid alias name to coloralias().  Alias names must consist only
           of alphanumerics, ".", "-", and "_".

       Invalid alias name %s in %s
           (W) You specified an invalid alias name on the left hand of the equal sign in a color
           mapping in ANSI_COLORS_ALIASES.  The color mapping was ignored.

       Invalid attribute name %s
           (F) You passed an invalid attribute name to color(), colored(), or coloralias().

       Invalid attribute name %s in %s
           (W) You specified an invalid attribute name on the right hand of the equal sign in a
           color mapping in ANSI_COLORS_ALIASES.  The color mapping was ignored.

       Name "%s" used only once: possible typo
           (W) You probably mistyped a constant color name such as:

               print FOOBAR "This text is color FOOBAR\n";

           It's probably better to always use commas after constant names in order to force the
           next error.

       No comma allowed after filehandle
           (F) You probably mistyped a constant color name such as:

               print FOOBAR, "This text is color FOOBAR\n";

           Generating this fatal compile error is one of the main advantages of using the
           constants interface, since you'll immediately know if you mistype a color name.

       No name for escape sequence %s
           (F) The ANSI escape sequence passed to uncolor() contains escapes which aren't
           recognized and can't be translated to names.

ENVIRONMENT

       ANSI_COLORS_ALIASES
           This environment variable allows the user to specify custom color aliases that will be
           understood by color(), colored(), and colorvalid().  None of the other functions will
           be affected, and no new color constants will be created.  The custom colors are
           aliases for existing color names; no new escape sequences can be introduced.  Only
           alphanumerics, ".", "_", and "-" are allowed in alias names.

           The format is:

               ANSI_COLORS_ALIASES='newcolor1=oldcolor1,newcolor2=oldcolor2'

           Whitespace is ignored.

           For example the Solarized <http://ethanschoonover.com/solarized> colors can be mapped
           with:

               ANSI_COLORS_ALIASES='\
                   base00=bright_yellow, on_base00=on_bright_yellow,\
                   base01=bright_green,  on_base01=on_bright_green, \
                   base02=black,         on_base02=on_black,        \
                   base03=bright_black,  on_base03=on_bright_black, \
                   base0=bright_blue,    on_base0=on_bright_blue,   \
                   base1=bright_cyan,    on_base1=on_bright_cyan,   \
                   base2=white,          on_base2=on_white,         \
                   base3=bright_white,   on_base3=on_bright_white,  \
                   orange=bright_red,    on_orange=on_bright_red,   \
                   violet=bright_magenta,on_violet=on_bright_magenta'

           This environment variable is read and applied when the Term::ANSIColor module is
           loaded and is then subsequently ignored.  Changes to ANSI_COLORS_ALIASES after the
           module is loaded will have no effect.  See coloralias() for an equivalent facility
           that can be used at runtime.

       ANSI_COLORS_DISABLED
           If this environment variable is set to a true value, all of the functions defined by
           this module (color(), colored(), and all of the constants not previously used in the
           program) will not output any escape sequences and instead will just return the empty
           string or pass through the original text as appropriate.  This is intended to support
           easy use of scripts using this module on platforms that don't support ANSI escape
           sequences.

COMPATIBILITY

       Term::ANSIColor was first included with Perl in Perl 5.6.0.

       The uncolor() function and support for ANSI_COLORS_DISABLED were added in Term::ANSIColor
       1.04, included in Perl 5.8.0.

       Support for dark was added in Term::ANSIColor 1.08, included in Perl 5.8.4.

       The color stack, including the ":pushpop" import tag, PUSHCOLOR, POPCOLOR, LOCALCOLOR, and
       the $Term::ANSIColor::AUTOLOCAL variable, was added in Term::ANSIColor 2.00, included in
       Perl 5.10.1.

       colorstrip() was added in Term::ANSIColor 2.01 and colorvalid() was added in
       Term::ANSIColor 2.02, both included in Perl 5.11.0.

       Support for colors 8 through 15 (the "bright_" variants) was added in Term::ANSIColor
       3.00, included in Perl 5.13.3.

       Support for italic was added in Term::ANSIColor 3.02, included in Perl 5.17.1.

       Support for colors 16 through 256 (the "ansi", "rgb", and "grey" colors), the
       ":constants256" import tag, the coloralias() function, and support for the
       ANSI_COLORS_ALIASES environment variable were added in Term::ANSIColor 4.00.

       $Term::ANSIColor::AUTOLOCAL was changed to take precedence over
       $Term::ANSIColor::AUTORESET, rather than the other way around, in Term::ANSIColor 4.00.

RESTRICTIONS

       It would be nice if one could leave off the commas around the constants entirely and just
       say:

           print BOLD BLUE ON_WHITE "Text\n" RESET;

       but the syntax of Perl doesn't allow this.  You need a comma after the string.  (Of
       course, you may consider it a bug that commas between all the constants aren't required,
       in which case you may feel free to insert commas unless you're using
       $Term::ANSIColor::AUTORESET or PUSHCOLOR/POPCOLOR.)

       For easier debugging, you may prefer to always use the commas when not setting
       $Term::ANSIColor::AUTORESET or PUSHCOLOR/POPCOLOR so that you'll get a fatal compile error
       rather than a warning.

       It's not possible to use this module to embed formatting and color attributes using Perl
       formats.  They replace the escape character with a space (as documented in perlform(1)),
       resulting in garbled output from the unrecognized attribute.  Even if there were a way
       around that problem, the format doesn't know that the non-printing escape sequence is
       zero-length and would incorrectly format the output.  For formatted output using color or
       other attributes, either use sprintf() instead or use formline() and then add the color or
       other attributes after formatting and before output.

NOTES

       The codes generated by this module are standard terminal control codes, complying with
       ECMA-048 and ISO 6429 (generally referred to as "ANSI color" for the color codes).  The
       non-color control codes (bold, dark, italic, underline, and reverse) are part of the
       earlier ANSI X3.64 standard for control sequences for video terminals and peripherals.

       Note that not all displays are ISO 6429-compliant, or even X3.64-compliant (or are even
       attempting to be so).  This module will not work as expected on displays that do not honor
       these escape sequences, such as cmd.exe, 4nt.exe, and command.com under either Windows NT
       or Windows 2000.  They may just be ignored, or they may display as an ESC character
       followed by some apparent garbage.

       Jean Delvare provided the following table of different common terminal emulators and their
       support for the various attributes and others have helped me flesh it out:

                     clear    bold     faint   under    blink   reverse  conceal
        ------------------------------------------------------------------------
        xterm         yes      yes      no      yes      yes      yes      yes
        linux         yes      yes      yes    bold      yes      yes      no
        rxvt          yes      yes      no      yes  bold/black   yes      no
        dtterm        yes      yes      yes     yes    reverse    yes      yes
        teraterm      yes    reverse    no      yes    rev/red    yes      no
        aixterm      kinda   normal     no      yes      no       yes      yes
        PuTTY         yes     color     no      yes      no       yes      no
        Windows       yes      no       no      no       no       yes      no
        Cygwin SSH    yes      yes      no     color    color    color     yes
        Terminal.app  yes      yes      no      yes      yes      yes      yes

       Windows is Windows telnet, Cygwin SSH is the OpenSSH implementation under Cygwin on
       Windows NT, and Mac Terminal is the Terminal application in Mac OS X.  Where the entry is
       other than yes or no, that emulator displays the given attribute as something else
       instead.  Note that on an aixterm, clear doesn't reset colors; you have to explicitly set
       the colors back to what you want.  More entries in this table are welcome.

       Support for code 3 (italic) is rare and therefore not mentioned in that table.  It is not
       believed to be fully supported by any of the terminals listed, although it's displayed as
       green in the Linux console, but it is reportedly supported by urxvt.

       Note that codes 6 (rapid blink) and 9 (strike-through) are specified in ANSI X3.64 and
       ECMA-048 but are not commonly supported by most displays and emulators and therefore
       aren't supported by this module at the present time.  ECMA-048 also specifies a large
       number of other attributes, including a sequence of attributes for font changes, Fraktur
       characters, double-underlining, framing, circling, and overlining.  As none of these
       attributes are widely supported or useful, they also aren't currently supported by this
       module.

       Most modern X terminal emulators support 256 colors.  Known to not support those colors
       are aterm, rxvt, Terminal.app, and TTY/VC.

SEE ALSO

       ECMA-048 is available on-line (at least at the time of this writing) at
       <http://www.ecma-international.org/publications/standards/Ecma-048.htm>.

       ISO 6429 is available from ISO for a charge; the author of this module does not own a copy
       of it.  Since the source material for ISO 6429 was ECMA-048 and the latter is available
       for free, there seems little reason to obtain the ISO standard.

       The 256-color control sequences are documented at
       <http://www.xfree86.org/current/ctlseqs.html> (search for 256-color).

       The CPAN module Term::ExtendedColor provides a different and more comprehensive interface
       for 256-color emulators that may be more convenient.

       The current version of this module is always available from its web site at
       <http://www.eyrie.org/~eagle/software/ansicolor/>.  It is also part of the Perl core
       distribution as of 5.6.0.

AUTHORS

       Original idea (using constants) by Zenin, reimplemented using subs by Russ Allbery
       <rra@stanford.edu>, and then combined with the original idea by Russ with input from
       Zenin.  256-color support is based on work by Kurt Starsinic.  Russ Allbery now maintains
       this module.

       PUSHCOLOR, POPCOLOR, and LOCALCOLOR were contributed by openmethods.com voice solutions.

COPYRIGHT AND LICENSE

       Copyright 1996 Zenin.  Copyright 1996, 1997, 1998, 2000, 2001, 2002, 2005, 2006, 2008,
       2009, 2010, 2011, 2012 Russ Allbery <rra@stanford.edu>.  Copyright 2012 Kurt Starsinic
       <kstarsinic@gmail.com>.  This program is free software; you may redistribute it and/or
       modify it under the same terms as Perl itself.