Provided by: libencode-perl_2.57-1_amd64 bug

NAME

       encoding - allows you to write your script in non-ascii or non-utf8

WARNING

       This module is deprecated under perl 5.18.  It uses a mechanism provided by perl that is
       deprecated under 5.18 and higher, and may be removed in a future version.

       The easiest and the best alternative is to write your script in UTF-8 and declear:

         use utf8; # not use encoding ':utf8';

       See perluniintro and utf8 for details.

SYNOPSIS

         use encoding "greek";  # Perl like Greek to you?
         use encoding "euc-jp"; # Jperl!

         # or you can even do this if your shell supports your native encoding

         perl -Mencoding=latin2 -e'...' # Feeling centrally European?
         perl -Mencoding=euc-kr -e'...' # Or Korean?

         # more control

         # A simple euc-cn => utf-8 converter
         use encoding "euc-cn", STDOUT => "utf8";  while(<>){print};

         # "no encoding;" supported (but not scoped!)
         no encoding;

         # an alternate way, Filter
         use encoding "euc-jp", Filter=>1;
         # now you can use kanji identifiers -- in euc-jp!

         # switch on locale -
         # note that this probably means that unless you have a complete control
         # over the environments the application is ever going to be run, you should
         # NOT use the feature of encoding pragma allowing you to write your script
         # in any recognized encoding because changing locale settings will wreck
         # the script; you can of course still use the other features of the pragma.
         use encoding ':locale';

ABSTRACT

       Let's start with a bit of history: Perl 5.6.0 introduced Unicode support.  You could apply
       "substr()" and regexes even to complex CJK characters -- so long as the script was written
       in UTF-8.  But back then, text editors that supported UTF-8 were still rare and many users
       instead chose to write scripts in legacy encodings, giving up a whole new feature of Perl
       5.6.

       Rewind to the future: starting from perl 5.8.0 with the encoding pragma, you can write
       your script in any encoding you like (so long as the "Encode" module supports it) and
       still enjoy Unicode support.  This pragma achieves that by doing the following:

       •   Internally converts all literals ("q//,qq//,qr//,qw///, qx//") from the encoding
           specified to utf8.  In Perl 5.8.1 and later, literals in "tr///" and "DATA" pseudo-
           filehandle are also converted.

       •   Changing PerlIO layers of "STDIN" and "STDOUT" to the encoding
            specified.

   Literal Conversions
       You can write code in EUC-JP as follows:

         my $Rakuda = "\xF1\xD1\xF1\xCC"; # Camel in Kanji
                      #<-char-><-char->   # 4 octets
         s/\bCamel\b/$Rakuda/;

       And with "use encoding "euc-jp"" in effect, it is the same thing as the code in UTF-8:

         my $Rakuda = "\x{99F1}\x{99DD}"; # two Unicode Characters
         s/\bCamel\b/$Rakuda/;

   PerlIO layers for "STD(IN|OUT)"
       The encoding pragma also modifies the filehandle layers of STDIN and STDOUT to the
       specified encoding.  Therefore,

         use encoding "euc-jp";
         my $message = "Camel is the symbol of perl.\n";
         my $Rakuda = "\xF1\xD1\xF1\xCC"; # Camel in Kanji
         $message =~ s/\bCamel\b/$Rakuda/;
         print $message;

       Will print "\xF1\xD1\xF1\xCC is the symbol of perl.\n", not "\x{99F1}\x{99DD} is the
       symbol of perl.\n".

       You can override this by giving extra arguments; see below.

   Implicit upgrading for byte strings
       By default, if strings operating under byte semantics and strings with Unicode character
       data are concatenated, the new string will be created by decoding the byte strings as ISO
       8859-1 (Latin-1).

       The encoding pragma changes this to use the specified encoding instead.  For example:

           use encoding 'utf8';
           my $string = chr(20000); # a Unicode string
           utf8::encode($string);   # now it's a UTF-8 encoded byte string
           # concatenate with another Unicode string
           print length($string . chr(20000));

       Will print 2, because $string is upgraded as UTF-8.  Without "use encoding 'utf8';", it
       will print 4 instead, since $string is three octets when interpreted as Latin-1.

   Side effects
       If the "encoding" pragma is in scope then the lengths returned are calculated from the
       length of $/ in Unicode characters, which is not always the same as the length of $/ in
       the native encoding.

       This pragma affects utf8::upgrade, but not utf8::downgrade.

FEATURES THAT REQUIRE 5.8.1

       Some of the features offered by this pragma requires perl 5.8.1.  Most of these are done
       by Inaba Hiroto.  Any other features and changes are good for 5.8.0.

       "NON-EUC" doublebyte encodings
           Because perl needs to parse script before applying this pragma, such encodings as
           Shift_JIS and Big-5 that may contain '\' (BACKSLASH; \x5c) in the second byte fails
           because the second byte may accidentally escape the quoting character that follows.
           Perl 5.8.1 or later fixes this problem.

       tr//
           "tr//" was overlooked by Perl 5 porters when they released perl 5.8.0 See the section
           below for details.

       DATA pseudo-filehandle
           Another feature that was overlooked was "DATA".

USAGE

       use encoding [ENCNAME] ;
           Sets the script encoding to ENCNAME.  And unless ${^UNICODE} exists and non-zero,
           PerlIO layers of STDIN and STDOUT are set to ":encoding(ENCNAME)".

           Note that STDERR WILL NOT be changed.

           Also note that non-STD file handles remain unaffected.  Use "use open" or "binmode" to
           change layers of those.

           If no encoding is specified, the environment variable PERL_ENCODING is consulted.  If
           no encoding can be found, the error "Unknown encoding 'ENCNAME'" will be thrown.

       use encoding ENCNAME [ STDIN => ENCNAME_IN ...] ;
           You can also individually set encodings of STDIN and STDOUT via the "STDIN => ENCNAME"
           form.  In this case, you cannot omit the first ENCNAME.  "STDIN => undef" turns the IO
           transcoding completely off.

           When ${^UNICODE} exists and non-zero, these options will completely ignored.
           ${^UNICODE} is a variable introduced in perl 5.8.1.  See perlrun see "${^UNICODE}" in
           perlvar and "-C" in perlrun for details (perl 5.8.1 and later).

       use encoding ENCNAME Filter=>1;
           This turns the encoding pragma into a source filter.  While the default approach just
           decodes interpolated literals (in qq() and qr()), this will apply a source filter to
           the entire source code.  See "The Filter Option" below for details.

       no encoding;
           Unsets the script encoding. The layers of STDIN, STDOUT are reset to ":raw" (the
           default unprocessed raw stream of bytes).

The Filter Option

       The magic of "use encoding" is not applied to the names of identifiers.  In order to make
       "${"\x{4eba}"}++" ($human++, where human is a single Han ideograph) work, you still need
       to write your script in UTF-8 -- or use a source filter.  That's what 'Filter=>1' does.

       What does this mean?  Your source code behaves as if it is written in UTF-8 with 'use
       utf8' in effect.  So even if your editor only supports Shift_JIS, for example, you can
       still try examples in Chapter 15 of "Programming Perl, 3rd Ed.".  For instance, you can
       use UTF-8 identifiers.

       This option is significantly slower and (as of this writing) non-ASCII identifiers are not
       very stable WITHOUT this option and with the source code written in UTF-8.

   Filter-related changes at Encode version 1.87
       •   The Filter option now sets STDIN and STDOUT like non-filter options.  And
           "STDIN=>ENCODING" and "STDOUT=>ENCODING" work like non-filter version.

       •   "use utf8" is implicitly declared so you no longer have to "use utf8" to
           "${"\x{4eba}"}++".

CAVEATS

   NOT SCOPED
       The pragma is a per script, not a per block lexical.  Only the last "use encoding" or "no
       encoding" matters, and it affects the whole script.  However, the <no encoding> pragma is
       supported and use encoding can appear as many times as you want in a given script.  The
       multiple use of this pragma is discouraged.

       By the same reason, the use this pragma inside modules is also discouraged (though not as
       strongly discouraged as the case above.  See below).

       If you still have to write a module with this pragma, be very careful of the load order.
       See the codes below;

         # called module
         package Module_IN_BAR;
         use encoding "bar";
         # stuff in "bar" encoding here
         1;

         # caller script
         use encoding "foo"
         use Module_IN_BAR;
         # surprise! use encoding "bar" is in effect.

       The best way to avoid this oddity is to use this pragma RIGHT AFTER other modules are
       loaded.  i.e.

         use Module_IN_BAR;
         use encoding "foo";

   DO NOT MIX MULTIPLE ENCODINGS
       Notice that only literals (string or regular expression) having only legacy code points
       are affected: if you mix data like this

           \xDF\x{100}

       the data is assumed to be in (Latin 1 and) Unicode, not in your native encoding.  In other
       words, this will match in "greek":

           "\xDF" =~ /\x{3af}/

       but this will not

           "\xDF\x{100}" =~ /\x{3af}\x{100}/

       since the "\xDF" (ISO 8859-7 GREEK SMALL LETTER IOTA WITH TONOS) on the left will not be
       upgraded to "\x{3af}" (Unicode GREEK SMALL LETTER IOTA WITH TONOS) because of the
       "\x{100}" on the left.  You should not be mixing your legacy data and Unicode in the same
       string.

       This pragma also affects encoding of the 0x80..0xFF code point range: normally characters
       in that range are left as eight-bit bytes (unless they are combined with characters with
       code points 0x100 or larger, in which case all characters need to become UTF-8 encoded),
       but if the "encoding" pragma is present, even the 0x80..0xFF range always gets UTF-8
       encoded.

       After all, the best thing about this pragma is that you don't have to resort to \x{....}
       just to spell your name in a native encoding.  So feel free to put your strings in your
       encoding in quotes and regexes.

   tr/// with ranges
       The encoding pragma works by decoding string literals in "q//,qq//,qr//,qw///, qx//" and
       so forth.  In perl 5.8.0, this does not apply to "tr///".  Therefore,

         use encoding 'euc-jp';
         #....
         $kana =~ tr/\xA4\xA1-\xA4\xF3/\xA5\xA1-\xA5\xF3/;
         #           -------- -------- -------- --------

       Does not work as

         $kana =~ tr/\x{3041}-\x{3093}/\x{30a1}-\x{30f3}/;

       Legend of characters above
             utf8     euc-jp   charnames::viacode()
             -----------------------------------------
             \x{3041} \xA4\xA1 HIRAGANA LETTER SMALL A
             \x{3093} \xA4\xF3 HIRAGANA LETTER N
             \x{30a1} \xA5\xA1 KATAKANA LETTER SMALL A
             \x{30f3} \xA5\xF3 KATAKANA LETTER N

       This counterintuitive behavior has been fixed in perl 5.8.1.

       workaround to tr///;

       In perl 5.8.0, you can work around as follows;

         use encoding 'euc-jp';
         #  ....
         eval qq{ \$kana =~ tr/\xA4\xA1-\xA4\xF3/\xA5\xA1-\xA5\xF3/ };

       Note the "tr//" expression is surrounded by "qq{}".  The idea behind is the same as
       classic idiom that makes "tr///" 'interpolate'.

          tr/$from/$to/;            # wrong!
          eval qq{ tr/$from/$to/ }; # workaround.

       Nevertheless, in case of encoding pragma even "q//" is affected so "tr///" not being
       decoded was obviously against the will of Perl5 Porters so it has been fixed in Perl 5.8.1
       or later.

EXAMPLE - Greekperl

           use encoding "iso 8859-7";

           # \xDF in ISO 8859-7 (Greek) is \x{3af} in Unicode.

           $a = "\xDF";
           $b = "\x{100}";

           printf "%#x\n", ord($a); # will print 0x3af, not 0xdf

           $c = $a . $b;

           # $c will be "\x{3af}\x{100}", not "\x{df}\x{100}".

           # chr() is affected, and ...

           print "mega\n"  if ord(chr(0xdf)) == 0x3af;

           # ... ord() is affected by the encoding pragma ...

           print "tera\n" if ord(pack("C", 0xdf)) == 0x3af;

           # ... as are eq and cmp ...

           print "peta\n" if "\x{3af}" eq  pack("C", 0xdf);
           print "exa\n"  if "\x{3af}" cmp pack("C", 0xdf) == 0;

           # ... but pack/unpack C are not affected, in case you still
           # want to go back to your native encoding

           print "zetta\n" if unpack("C", (pack("C", 0xdf))) == 0xdf;

KNOWN PROBLEMS

       literals in regex that are longer than 127 bytes
           For native multibyte encodings (either fixed or variable length), the current
           implementation of the regular expressions may introduce recoding errors for regular
           expression literals longer than 127 bytes.

       EBCDIC
           The encoding pragma is not supported on EBCDIC platforms.  (Porters who are willing
           and able to remove this limitation are welcome.)

       format
           This pragma doesn't work well with format because PerlIO does not get along very well
           with it.  When format contains non-ascii characters it prints funny or gets "wide
           character warnings".  To understand it, try the code below.

             # Save this one in utf8
             # replace *non-ascii* with a non-ascii string
             my $camel;
             format STDOUT =
             *non-ascii*@>>>>>>>
             $camel
             .
             $camel = "*non-ascii*";
             binmode(STDOUT=>':encoding(utf8)'); # bang!
             write;              # funny
             print $camel, "\n"; # fine

           Without binmode this happens to work but without binmode, print() fails instead of
           write().

           At any rate, the very use of format is questionable when it comes to unicode
           characters since you have to consider such things as character width (i.e. double-
           width for ideographs) and directions (i.e. BIDI for Arabic and Hebrew).

       Thread safety
           "use encoding ..." is not thread-safe (i.e., do not use in threaded applications).

   The Logic of :locale
       The logic of ":locale" is as follows:

       1.  If the platform supports the langinfo(CODESET) interface, the codeset returned is used
           as the default encoding for the open pragma.

       2.  If 1. didn't work but we are under the locale pragma, the environment variables LC_ALL
           and LANG (in that order) are matched for encodings (the part after ".", if any), and
           if any found, that is used as the default encoding for the open pragma.

       3.  If 1. and 2. didn't work, the environment variables LC_ALL and LANG (in that order)
           are matched for anything looking like UTF-8, and if any found, ":utf8" is used as the
           default encoding for the open pragma.

       If your locale environment variables (LC_ALL, LC_CTYPE, LANG) contain the strings 'UTF-8'
       or 'UTF8' (case-insensitive matching), the default encoding of your STDIN, STDOUT, and
       STDERR, and of any subsequent file open, is UTF-8.

HISTORY

       This pragma first appeared in Perl 5.8.0.  For features that require 5.8.1 and better, see
       above.

       The ":locale" subpragma was implemented in 2.01, or Perl 5.8.6.

SEE ALSO

       perlunicode, Encode, open, Filter::Util::Call,

       Ch. 15 of "Programming Perl (3rd Edition)" by Larry Wall, Tom Christiansen, Jon Orwant;
       O'Reilly & Associates; ISBN 0-596-00027-8