Provided by: libev-dev_4.15-3_amd64 bug

NAME

       libev - a high performance full-featured event loop written in C

SYNOPSIS

          #include <ev.h>

   EXAMPLE PROGRAM
          // a single header file is required
          #include <ev.h>

          #include <stdio.h> // for puts

          // every watcher type has its own typedef'd struct
          // with the name ev_TYPE
          ev_io stdin_watcher;
          ev_timer timeout_watcher;

          // all watcher callbacks have a similar signature
          // this callback is called when data is readable on stdin
          static void
          stdin_cb (EV_P_ ev_io *w, int revents)
          {
            puts ("stdin ready");
            // for one-shot events, one must manually stop the watcher
            // with its corresponding stop function.
            ev_io_stop (EV_A_ w);

            // this causes all nested ev_run's to stop iterating
            ev_break (EV_A_ EVBREAK_ALL);
          }

          // another callback, this time for a time-out
          static void
          timeout_cb (EV_P_ ev_timer *w, int revents)
          {
            puts ("timeout");
            // this causes the innermost ev_run to stop iterating
            ev_break (EV_A_ EVBREAK_ONE);
          }

          int
          main (void)
          {
            // use the default event loop unless you have special needs
            struct ev_loop *loop = EV_DEFAULT;

            // initialise an io watcher, then start it
            // this one will watch for stdin to become readable
            ev_io_init (&stdin_watcher, stdin_cb, /*STDIN_FILENO*/ 0, EV_READ);
            ev_io_start (loop, &stdin_watcher);

            // initialise a timer watcher, then start it
            // simple non-repeating 5.5 second timeout
            ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);
            ev_timer_start (loop, &timeout_watcher);

            // now wait for events to arrive
            ev_run (loop, 0);

            // break was called, so exit
            return 0;
          }

ABOUT THIS DOCUMENT

       This document documents the libev software package.

       The newest version of this document is also available as an html-formatted web page you
       might find easier to navigate when reading it for the first time:
       <http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod>.

       While this document tries to be as complete as possible in documenting libev, its usage
       and the rationale behind its design, it is not a tutorial on event-based programming, nor
       will it introduce event-based programming with libev.

       Familiarity with event based programming techniques in general is assumed throughout this
       document.

WHAT TO READ WHEN IN A HURRY

       This manual tries to be very detailed, but unfortunately, this also makes it very long. If
       you just want to know the basics of libev, I suggest reading "ANATOMY OF A WATCHER", then
       the "EXAMPLE PROGRAM" above and look up the missing functions in "GLOBAL FUNCTIONS" and
       the "ev_io" and "ev_timer" sections in "WATCHER TYPES".

ABOUT LIBEV

       Libev is an event loop: you register interest in certain events (such as a file descriptor
       being readable or a timeout occurring), and it will manage these event sources and provide
       your program with events.

       To do this, it must take more or less complete control over your process (or thread) by
       executing the event loop handler, and will then communicate events via a callback
       mechanism.

       You register interest in certain events by registering so-called event watchers, which are
       relatively small C structures you initialise with the details of the event, and then hand
       it over to libev by starting the watcher.

   FEATURES
       Libev supports "select", "poll", the Linux-specific "epoll", the BSD-specific "kqueue" and
       the Solaris-specific event port mechanisms for file descriptor events ("ev_io"), the Linux
       "inotify" interface (for "ev_stat"), Linux eventfd/signalfd (for faster and cleaner inter-
       thread wakeup ("ev_async")/signal handling ("ev_signal")) relative timers ("ev_timer"),
       absolute timers with customised rescheduling ("ev_periodic"), synchronous signals
       ("ev_signal"), process status change events ("ev_child"), and event watchers dealing with
       the event loop mechanism itself ("ev_idle", "ev_embed", "ev_prepare" and "ev_check"
       watchers) as well as file watchers ("ev_stat") and even limited support for fork events
       ("ev_fork").

       It also is quite fast (see this benchmark <http://libev.schmorp.de/bench.html> comparing
       it to libevent for example).

   CONVENTIONS
       Libev is very configurable. In this manual the default (and most common) configuration
       will be described, which supports multiple event loops. For more info about various
       configuration options please have a look at EMBED section in this manual. If libev was
       configured without support for multiple event loops, then all functions taking an initial
       argument of name "loop" (which is always of type "struct ev_loop *") will not have this
       argument.

   TIME REPRESENTATION
       Libev represents time as a single floating point number, representing the (fractional)
       number of seconds since the (POSIX) epoch (in practice somewhere near the beginning of
       1970, details are complicated, don't ask). This type is called "ev_tstamp", which is what
       you should use too. It usually aliases to the "double" type in C. When you need to do any
       calculations on it, you should treat it as some floating point value.

       Unlike the name component "stamp" might indicate, it is also used for time differences
       (e.g. delays) throughout libev.

ERROR HANDLING

       Libev knows three classes of errors: operating system errors, usage errors and internal
       errors (bugs).

       When libev catches an operating system error it cannot handle (for example a system call
       indicating a condition libev cannot fix), it calls the callback set via
       "ev_set_syserr_cb", which is supposed to fix the problem or abort. The default is to print
       a diagnostic message and to call "abort ()".

       When libev detects a usage error such as a negative timer interval, then it will print a
       diagnostic message and abort (via the "assert" mechanism, so "NDEBUG" will disable this
       checking): these are programming errors in the libev caller and need to be fixed there.

       Libev also has a few internal error-checking "assert"ions, and also has extensive
       consistency checking code. These do not trigger under normal circumstances, as they
       indicate either a bug in libev or worse.

GLOBAL FUNCTIONS

       These functions can be called anytime, even before initialising the library in any way.

       ev_tstamp ev_time ()
           Returns the current time as libev would use it. Please note that the "ev_now" function
           is usually faster and also often returns the timestamp you actually want to know. Also
           interesting is the combination of "ev_now_update" and "ev_now".

       ev_sleep (ev_tstamp interval)
           Sleep for the given interval: The current thread will be blocked until either it is
           interrupted or the given time interval has passed (approximately - it might return a
           bit earlier even if not interrupted). Returns immediately if "interval <= 0".

           Basically this is a sub-second-resolution "sleep ()".

           The range of the "interval" is limited - libev only guarantees to work with sleep
           times of up to one day ("interval <= 86400").

       int ev_version_major ()
       int ev_version_minor ()
           You can find out the major and minor ABI version numbers of the library you linked
           against by calling the functions "ev_version_major" and "ev_version_minor". If you
           want, you can compare against the global symbols "EV_VERSION_MAJOR" and
           "EV_VERSION_MINOR", which specify the version of the library your program was compiled
           against.

           These version numbers refer to the ABI version of the library, not the release
           version.

           Usually, it's a good idea to terminate if the major versions mismatch, as this
           indicates an incompatible change. Minor versions are usually compatible to older
           versions, so a larger minor version alone is usually not a problem.

           Example: Make sure we haven't accidentally been linked against the wrong version
           (note, however, that this will not detect other ABI mismatches, such as LFS or
           reentrancy).

              assert (("libev version mismatch",
                       ev_version_major () == EV_VERSION_MAJOR
                       && ev_version_minor () >= EV_VERSION_MINOR));

       unsigned int ev_supported_backends ()
           Return the set of all backends (i.e. their corresponding "EV_BACKEND_*" value)
           compiled into this binary of libev (independent of their availability on the system
           you are running on). See "ev_default_loop" for a description of the set values.

           Example: make sure we have the epoll method, because yeah this is cool and a must have
           and can we have a torrent of it please!!!11

              assert (("sorry, no epoll, no sex",
                       ev_supported_backends () & EVBACKEND_EPOLL));

       unsigned int ev_recommended_backends ()
           Return the set of all backends compiled into this binary of libev and also recommended
           for this platform, meaning it will work for most file descriptor types. This set is
           often smaller than the one returned by "ev_supported_backends", as for example kqueue
           is broken on most BSDs and will not be auto-detected unless you explicitly request it
           (assuming you know what you are doing). This is the set of backends that libev will
           probe for if you specify no backends explicitly.

       unsigned int ev_embeddable_backends ()
           Returns the set of backends that are embeddable in other event loops. This value is
           platform-specific but can include backends not available on the current system. To
           find which embeddable backends might be supported on the current system, you would
           need to look at "ev_embeddable_backends () & ev_supported_backends ()", likewise for
           recommended ones.

           See the description of "ev_embed" watchers for more info.

       ev_set_allocator (void *(*cb)(void *ptr, long size) throw ())
           Sets the allocation function to use (the prototype is similar - the semantics are
           identical to the "realloc" C89/SuS/POSIX function). It is used to allocate and free
           memory (no surprises here). If it returns zero when memory needs to be allocated
           ("size != 0"), the library might abort or take some potentially destructive action.

           Since some systems (at least OpenBSD and Darwin) fail to implement correct "realloc"
           semantics, libev will use a wrapper around the system "realloc" and "free" functions
           by default.

           You could override this function in high-availability programs to, say, free some
           memory if it cannot allocate memory, to use a special allocator, or even to sleep a
           while and retry until some memory is available.

           Example: Replace the libev allocator with one that waits a bit and then retries
           (example requires a standards-compliant "realloc").

              static void *
              persistent_realloc (void *ptr, size_t size)
              {
                for (;;)
                  {
                    void *newptr = realloc (ptr, size);

                    if (newptr)
                      return newptr;

                    sleep (60);
                  }
              }

              ...
              ev_set_allocator (persistent_realloc);

       ev_set_syserr_cb (void (*cb)(const char *msg) throw ())
           Set the callback function to call on a retryable system call error (such as failed
           select, poll, epoll_wait). The message is a printable string indicating the system
           call or subsystem causing the problem. If this callback is set, then libev will expect
           it to remedy the situation, no matter what, when it returns. That is, libev will
           generally retry the requested operation, or, if the condition doesn't go away, do bad
           stuff (such as abort).

           Example: This is basically the same thing that libev does internally, too.

              static void
              fatal_error (const char *msg)
              {
                perror (msg);
                abort ();
              }

              ...
              ev_set_syserr_cb (fatal_error);

       ev_feed_signal (int signum)
           This function can be used to "simulate" a signal receive. It is completely safe to
           call this function at any time, from any context, including signal handlers or random
           threads.

           Its main use is to customise signal handling in your process, especially in the
           presence of threads. For example, you could block signals by default in all threads
           (and specifying "EVFLAG_NOSIGMASK" when creating any loops), and in one thread, use
           "sigwait" or any other mechanism to wait for signals, then "deliver" them to libev by
           calling "ev_feed_signal".

FUNCTIONS CONTROLLING EVENT LOOPS

       An event loop is described by a "struct ev_loop *" (the "struct" is not optional in this
       case unless libev 3 compatibility is disabled, as libev 3 had an "ev_loop" function
       colliding with the struct name).

       The library knows two types of such loops, the default loop, which supports child process
       events, and dynamically created event loops which do not.

       struct ev_loop *ev_default_loop (unsigned int flags)
           This returns the "default" event loop object, which is what you should normally use
           when you just need "the event loop". Event loop objects and the "flags" parameter are
           described in more detail in the entry for "ev_loop_new".

           If the default loop is already initialised then this function simply returns it (and
           ignores the flags. If that is troubling you, check "ev_backend ()" afterwards).
           Otherwise it will create it with the given flags, which should almost always be 0,
           unless the caller is also the one calling "ev_run" or otherwise qualifies as "the main
           program".

           If you don't know what event loop to use, use the one returned from this function (or
           via the "EV_DEFAULT" macro).

           Note that this function is not thread-safe, so if you want to use it from multiple
           threads, you have to employ some kind of mutex (note also that this case is unlikely,
           as loops cannot be shared easily between threads anyway).

           The default loop is the only loop that can handle "ev_child" watchers, and to do this,
           it always registers a handler for "SIGCHLD". If this is a problem for your application
           you can either create a dynamic loop with "ev_loop_new" which doesn't do that, or you
           can simply overwrite the "SIGCHLD" signal handler after calling "ev_default_init".

           Example: This is the most typical usage.

              if (!ev_default_loop (0))
                fatal ("could not initialise libev, bad $LIBEV_FLAGS in environment?");

           Example: Restrict libev to the select and poll backends, and do not allow environment
           settings to be taken into account:

              ev_default_loop (EVBACKEND_POLL | EVBACKEND_SELECT | EVFLAG_NOENV);

       struct ev_loop *ev_loop_new (unsigned int flags)
           This will create and initialise a new event loop object. If the loop could not be
           initialised, returns false.

           This function is thread-safe, and one common way to use libev with threads is indeed
           to create one loop per thread, and using the default loop in the "main" or "initial"
           thread.

           The flags argument can be used to specify special behaviour or specific backends to
           use, and is usually specified as 0 (or "EVFLAG_AUTO").

           The following flags are supported:

           "EVFLAG_AUTO"
               The default flags value. Use this if you have no clue (it's the right thing,
               believe me).

           "EVFLAG_NOENV"
               If this flag bit is or'ed into the flag value (or the program runs setuid or
               setgid) then libev will not look at the environment variable "LIBEV_FLAGS".
               Otherwise (the default), this environment variable will override the flags
               completely if it is found in the environment. This is useful to try out specific
               backends to test their performance, or to work around bugs.

           "EVFLAG_FORKCHECK"
               Instead of calling "ev_loop_fork" manually after a fork, you can also make libev
               check for a fork in each iteration by enabling this flag.

               This works by calling "getpid ()" on every iteration of the loop, and thus this
               might slow down your event loop if you do a lot of loop iterations and little real
               work, but is usually not noticeable (on my GNU/Linux system for example, "getpid"
               is actually a simple 5-insn sequence without a system call and thus very fast, but
               my GNU/Linux system also has "pthread_atfork" which is even faster).

               The big advantage of this flag is that you can forget about fork (and forget about
               forgetting to tell libev about forking) when you use this flag.

               This flag setting cannot be overridden or specified in the "LIBEV_FLAGS"
               environment variable.

           "EVFLAG_NOINOTIFY"
               When this flag is specified, then libev will not attempt to use the inotify API
               for its "ev_stat" watchers. Apart from debugging and testing, this flag can be
               useful to conserve inotify file descriptors, as otherwise each loop using
               "ev_stat" watchers consumes one inotify handle.

           "EVFLAG_SIGNALFD"
               When this flag is specified, then libev will attempt to use the signalfd API for
               its "ev_signal" (and "ev_child") watchers. This API delivers signals
               synchronously, which makes it both faster and might make it possible to get the
               queued signal data. It can also simplify signal handling with threads, as long as
               you properly block signals in your threads that are not interested in handling
               them.

               Signalfd will not be used by default as this changes your signal mask, and there
               are a lot of shoddy libraries and programs (glib's threadpool for example) that
               can't properly initialise their signal masks.

           "EVFLAG_NOSIGMASK"
               When this flag is specified, then libev will avoid to modify the signal mask.
               Specifically, this means you have to make sure signals are unblocked when you want
               to receive them.

               This behaviour is useful when you want to do your own signal handling, or want to
               handle signals only in specific threads and want to avoid libev unblocking the
               signals.

               It's also required by POSIX in a threaded program, as libev calls "sigprocmask",
               whose behaviour is officially unspecified.

               This flag's behaviour will become the default in future versions of libev.

           "EVBACKEND_SELECT"  (value 1, portable select backend)
               This is your standard select(2) backend. Not completely standard, as libev tries
               to roll its own fd_set with no limits on the number of fds, but if that fails,
               expect a fairly low limit on the number of fds when using this backend. It doesn't
               scale too well (O(highest_fd)), but its usually the fastest backend for a low
               number of (low-numbered :) fds.

               To get good performance out of this backend you need a high amount of parallelism
               (most of the file descriptors should be busy). If you are writing a server, you
               should "accept ()" in a loop to accept as many connections as possible during one
               iteration. You might also want to have a look at "ev_set_io_collect_interval ()"
               to increase the amount of readiness notifications you get per iteration.

               This backend maps "EV_READ" to the "readfds" set and "EV_WRITE" to the "writefds"
               set (and to work around Microsoft Windows bugs, also onto the "exceptfds" set on
               that platform).

           "EVBACKEND_POLL"    (value 2, poll backend, available everywhere except on windows)
               And this is your standard poll(2) backend. It's more complicated than select, but
               handles sparse fds better and has no artificial limit on the number of fds you can
               use (except it will slow down considerably with a lot of inactive fds). It scales
               similarly to select, i.e. O(total_fds). See the entry for "EVBACKEND_SELECT",
               above, for performance tips.

               This backend maps "EV_READ" to "POLLIN | POLLERR | POLLHUP", and "EV_WRITE" to
               "POLLOUT | POLLERR | POLLHUP".

           "EVBACKEND_EPOLL"   (value 4, Linux)
               Use the linux-specific epoll(7) interface (for both pre- and post-2.6.9 kernels).

               For few fds, this backend is a bit little slower than poll and select, but it
               scales phenomenally better. While poll and select usually scale like O(total_fds)
               where total_fds is the total number of fds (or the highest fd), epoll scales
               either O(1) or O(active_fds).

               The epoll mechanism deserves honorable mention as the most misdesigned of the more
               advanced event mechanisms: mere annoyances include silently dropping file
               descriptors, requiring a system call per change per file descriptor (and
               unnecessary guessing of parameters), problems with dup, returning before the
               timeout value, resulting in additional iterations (and only giving 5ms accuracy
               while select on the same platform gives 0.1ms) and so on. The biggest issue is
               fork races, however - if a program forks then both parent and child process have
               to recreate the epoll set, which can take considerable time (one syscall per file
               descriptor) and is of course hard to detect.

               Epoll is also notoriously buggy - embedding epoll fds should work, but of course
               doesn't, and epoll just loves to report events for totally different file
               descriptors (even already closed ones, so one cannot even remove them from the
               set) than registered in the set (especially on SMP systems). Libev tries to
               counter these spurious notifications by employing an additional generation counter
               and comparing that against the events to filter out spurious ones, recreating the
               set when required. Epoll also erroneously rounds down timeouts, but gives you no
               way to know when and by how much, so sometimes you have to busy-wait because epoll
               returns immediately despite a nonzero timeout. And last not least, it also refuses
               to work with some file descriptors which work perfectly fine with "select" (files,
               many character devices...).

               Epoll is truly the train wreck among event poll mechanisms, a frankenpoll, cobbled
               together in a hurry, no thought to design or interaction with others. Oh, the
               pain, will it ever stop...

               While stopping, setting and starting an I/O watcher in the same iteration will
               result in some caching, there is still a system call per such incident (because
               the same file descriptor could point to a different file description now), so its
               best to avoid that. Also, "dup ()"'ed file descriptors might not work very well if
               you register events for both file descriptors.

               Best performance from this backend is achieved by not unregistering all watchers
               for a file descriptor until it has been closed, if possible, i.e. keep at least
               one watcher active per fd at all times. Stopping and starting a watcher (without
               re-setting it) also usually doesn't cause extra overhead. A fork can both result
               in spurious notifications as well as in libev having to destroy and recreate the
               epoll object, which can take considerable time and thus should be avoided.

               All this means that, in practice, "EVBACKEND_SELECT" can be as fast or faster than
               epoll for maybe up to a hundred file descriptors, depending on the usage. So sad.

               While nominally embeddable in other event loops, this feature is broken in all
               kernel versions tested so far.

               This backend maps "EV_READ" and "EV_WRITE" in the same way as "EVBACKEND_POLL".

           "EVBACKEND_KQUEUE"  (value 8, most BSD clones)
               Kqueue deserves special mention, as at the time of this writing, it was broken on
               all BSDs except NetBSD (usually it doesn't work reliably with anything but sockets
               and pipes, except on Darwin, where of course it's completely useless). Unlike
               epoll, however, whose brokenness is by design, these kqueue bugs can (and
               eventually will) be fixed without API changes to existing programs. For this
               reason it's not being "auto-detected" unless you explicitly specify it in the
               flags (i.e. using "EVBACKEND_KQUEUE") or libev was compiled on a known-to-be-good
               (-enough) system like NetBSD.

               You still can embed kqueue into a normal poll or select backend and use it only
               for sockets (after having made sure that sockets work with kqueue on the target
               platform). See "ev_embed" watchers for more info.

               It scales in the same way as the epoll backend, but the interface to the kernel is
               more efficient (which says nothing about its actual speed, of course). While
               stopping, setting and starting an I/O watcher does never cause an extra system
               call as with "EVBACKEND_EPOLL", it still adds up to two event changes per
               incident. Support for "fork ()" is very bad (you might have to leak fd's on fork,
               but it's more sane than epoll) and it drops fds silently in similarly hard-to-
               detect cases.

               This backend usually performs well under most conditions.

               While nominally embeddable in other event loops, this doesn't work everywhere, so
               you might need to test for this. And since it is broken almost everywhere, you
               should only use it when you have a lot of sockets (for which it usually works), by
               embedding it into another event loop (e.g. "EVBACKEND_SELECT" or "EVBACKEND_POLL"
               (but "poll" is of course also broken on OS X)) and, did I mention it, using it
               only for sockets.

               This backend maps "EV_READ" into an "EVFILT_READ" kevent with "NOTE_EOF", and
               "EV_WRITE" into an "EVFILT_WRITE" kevent with "NOTE_EOF".

           "EVBACKEND_DEVPOLL" (value 16, Solaris 8)
               This is not implemented yet (and might never be, unless you send me an
               implementation). According to reports, "/dev/poll" only supports sockets and is
               not embeddable, which would limit the usefulness of this backend immensely.

           "EVBACKEND_PORT"    (value 32, Solaris 10)
               This uses the Solaris 10 event port mechanism. As with everything on Solaris, it's
               really slow, but it still scales very well (O(active_fds)).

               While this backend scales well, it requires one system call per active file
               descriptor per loop iteration. For small and medium numbers of file descriptors a
               "slow" "EVBACKEND_SELECT" or "EVBACKEND_POLL" backend might perform better.

               On the positive side, this backend actually performed fully to specification in
               all tests and is fully embeddable, which is a rare feat among the OS-specific
               backends (I vastly prefer correctness over speed hacks).

               On the negative side, the interface is bizarre - so bizarre that even sun itself
               gets it wrong in their code examples: The event polling function sometimes returns
               events to the caller even though an error occurred, but with no indication whether
               it has done so or not (yes, it's even documented that way) - deadly for edge-
               triggered interfaces where you absolutely have to know whether an event occurred
               or not because you have to re-arm the watcher.

               Fortunately libev seems to be able to work around these idiocies.

               This backend maps "EV_READ" and "EV_WRITE" in the same way as "EVBACKEND_POLL".

           "EVBACKEND_ALL"
               Try all backends (even potentially broken ones that wouldn't be tried with
               "EVFLAG_AUTO"). Since this is a mask, you can do stuff such as "EVBACKEND_ALL &
               ~EVBACKEND_KQUEUE".

               It is definitely not recommended to use this flag, use whatever
               "ev_recommended_backends ()" returns, or simply do not specify a backend at all.

           "EVBACKEND_MASK"
               Not a backend at all, but a mask to select all backend bits from a "flags" value,
               in case you want to mask out any backends from a flags value (e.g. when modifying
               the "LIBEV_FLAGS" environment variable).

           If one or more of the backend flags are or'ed into the flags value, then only these
           backends will be tried (in the reverse order as listed here). If none are specified,
           all backends in "ev_recommended_backends ()" will be tried.

           Example: Try to create a event loop that uses epoll and nothing else.

              struct ev_loop *epoller = ev_loop_new (EVBACKEND_EPOLL | EVFLAG_NOENV);
              if (!epoller)
                fatal ("no epoll found here, maybe it hides under your chair");

           Example: Use whatever libev has to offer, but make sure that kqueue is used if
           available.

              struct ev_loop *loop = ev_loop_new (ev_recommended_backends () | EVBACKEND_KQUEUE);

       ev_loop_destroy (loop)
           Destroys an event loop object (frees all memory and kernel state etc.). None of the
           active event watchers will be stopped in the normal sense, so e.g. "ev_is_active"
           might still return true. It is your responsibility to either stop all watchers cleanly
           yourself before calling this function, or cope with the fact afterwards (which is
           usually the easiest thing, you can just ignore the watchers and/or "free ()" them for
           example).

           Note that certain global state, such as signal state (and installed signal handlers),
           will not be freed by this function, and related watchers (such as signal and child
           watchers) would need to be stopped manually.

           This function is normally used on loop objects allocated by "ev_loop_new", but it can
           also be used on the default loop returned by "ev_default_loop", in which case it is
           not thread-safe.

           Note that it is not advisable to call this function on the default loop except in the
           rare occasion where you really need to free its resources.  If you need dynamically
           allocated loops it is better to use "ev_loop_new" and "ev_loop_destroy".

       ev_loop_fork (loop)
           This function sets a flag that causes subsequent "ev_run" iterations to reinitialise
           the kernel state for backends that have one. Despite the name, you can call it
           anytime, but it makes most sense after forking, in the child process. You must call it
           (or use "EVFLAG_FORKCHECK") in the child before resuming or calling "ev_run".

           Again, you have to call it on any loop that you want to re-use after a fork, even if
           you do not plan to use the loop in the parent. This is because some kernel interfaces
           *cough* kqueue *cough* do funny things during fork.

           On the other hand, you only need to call this function in the child process if and
           only if you want to use the event loop in the child. If you just fork+exec or create a
           new loop in the child, you don't have to call it at all (in fact, "epoll" is so badly
           broken that it makes a difference, but libev will usually detect this case on its own
           and do a costly reset of the backend).

           The function itself is quite fast and it's usually not a problem to call it just in
           case after a fork.

           Example: Automate calling "ev_loop_fork" on the default loop when using pthreads.

              static void
              post_fork_child (void)
              {
                ev_loop_fork (EV_DEFAULT);
              }

              ...
              pthread_atfork (0, 0, post_fork_child);

       int ev_is_default_loop (loop)
           Returns true when the given loop is, in fact, the default loop, and false otherwise.

       unsigned int ev_iteration (loop)
           Returns the current iteration count for the event loop, which is identical to the
           number of times libev did poll for new events. It starts at 0 and happily wraps around
           with enough iterations.

           This value can sometimes be useful as a generation counter of sorts (it "ticks" the
           number of loop iterations), as it roughly corresponds with "ev_prepare" and "ev_check"
           calls - and is incremented between the prepare and check phases.

       unsigned int ev_depth (loop)
           Returns the number of times "ev_run" was entered minus the number of times "ev_run"
           was exited normally, in other words, the recursion depth.

           Outside "ev_run", this number is zero. In a callback, this number is 1, unless
           "ev_run" was invoked recursively (or from another thread), in which case it is higher.

           Leaving "ev_run" abnormally (setjmp/longjmp, cancelling the thread, throwing an
           exception etc.), doesn't count as "exit" - consider this as a hint to avoid such
           ungentleman-like behaviour unless it's really convenient, in which case it is fully
           supported.

       unsigned int ev_backend (loop)
           Returns one of the "EVBACKEND_*" flags indicating the event backend in use.

       ev_tstamp ev_now (loop)
           Returns the current "event loop time", which is the time the event loop received
           events and started processing them. This timestamp does not change as long as
           callbacks are being processed, and this is also the base time used for relative
           timers. You can treat it as the timestamp of the event occurring (or more correctly,
           libev finding out about it).

       ev_now_update (loop)
           Establishes the current time by querying the kernel, updating the time returned by
           "ev_now ()" in the progress. This is a costly operation and is usually done
           automatically within "ev_run ()".

           This function is rarely useful, but when some event callback runs for a very long time
           without entering the event loop, updating libev's idea of the current time is a good
           idea.

           See also "The special problem of time updates" in the "ev_timer" section.

       ev_suspend (loop)
       ev_resume (loop)
           These two functions suspend and resume an event loop, for use when the loop is not
           used for a while and timeouts should not be processed.

           A typical use case would be an interactive program such as a game:  When the user
           presses "^Z" to suspend the game and resumes it an hour later it would be best to
           handle timeouts as if no time had actually passed while the program was suspended.
           This can be achieved by calling "ev_suspend" in your "SIGTSTP" handler, sending
           yourself a "SIGSTOP" and calling "ev_resume" directly afterwards to resume timer
           processing.

           Effectively, all "ev_timer" watchers will be delayed by the time spend between
           "ev_suspend" and "ev_resume", and all "ev_periodic" watchers will be rescheduled (that
           is, they will lose any events that would have occurred while suspended).

           After calling "ev_suspend" you must not call any function on the given loop other than
           "ev_resume", and you must not call "ev_resume" without a previous call to
           "ev_suspend".

           Calling "ev_suspend"/"ev_resume" has the side effect of updating the event loop time
           (see "ev_now_update").

       bool ev_run (loop, int flags)
           Finally, this is it, the event handler. This function usually is called after you have
           initialised all your watchers and you want to start handling events. It will ask the
           operating system for any new events, call the watcher callbacks, and then repeat the
           whole process indefinitely: This is why event loops are called loops.

           If the flags argument is specified as 0, it will keep handling events until either no
           event watchers are active anymore or "ev_break" was called.

           The return value is false if there are no more active watchers (which usually means
           "all jobs done" or "deadlock"), and true in all other cases (which usually means " you
           should call "ev_run" again").

           Please note that an explicit "ev_break" is usually better than relying on all watchers
           to be stopped when deciding when a program has finished (especially in interactive
           programs), but having a program that automatically loops as long as it has to and no
           longer by virtue of relying on its watchers stopping correctly, that is truly a thing
           of beauty.

           This function is mostly exception-safe - you can break out of a "ev_run" call by
           calling "longjmp" in a callback, throwing a C++ exception and so on. This does not
           decrement the "ev_depth" value, nor will it clear any outstanding "EVBREAK_ONE"
           breaks.

           A flags value of "EVRUN_NOWAIT" will look for new events, will handle those events and
           any already outstanding ones, but will not wait and block your process in case there
           are no events and will return after one iteration of the loop. This is sometimes
           useful to poll and handle new events while doing lengthy calculations, to keep the
           program responsive.

           A flags value of "EVRUN_ONCE" will look for new events (waiting if necessary) and will
           handle those and any already outstanding ones. It will block your process until at
           least one new event arrives (which could be an event internal to libev itself, so
           there is no guarantee that a user-registered callback will be called), and will return
           after one iteration of the loop.

           This is useful if you are waiting for some external event in conjunction with
           something not expressible using other libev watchers (i.e. "roll your own "ev_run"").
           However, a pair of "ev_prepare"/"ev_check" watchers is usually a better approach for
           this kind of thing.

           Here are the gory details of what "ev_run" does (this is for your understanding, not a
           guarantee that things will work exactly like this in future versions):

              - Increment loop depth.
              - Reset the ev_break status.
              - Before the first iteration, call any pending watchers.
              LOOP:
              - If EVFLAG_FORKCHECK was used, check for a fork.
              - If a fork was detected (by any means), queue and call all fork watchers.
              - Queue and call all prepare watchers.
              - If ev_break was called, goto FINISH.
              - If we have been forked, detach and recreate the kernel state
                as to not disturb the other process.
              - Update the kernel state with all outstanding changes.
              - Update the "event loop time" (ev_now ()).
              - Calculate for how long to sleep or block, if at all
                (active idle watchers, EVRUN_NOWAIT or not having
                any active watchers at all will result in not sleeping).
              - Sleep if the I/O and timer collect interval say so.
              - Increment loop iteration counter.
              - Block the process, waiting for any events.
              - Queue all outstanding I/O (fd) events.
              - Update the "event loop time" (ev_now ()), and do time jump adjustments.
              - Queue all expired timers.
              - Queue all expired periodics.
              - Queue all idle watchers with priority higher than that of pending events.
              - Queue all check watchers.
              - Call all queued watchers in reverse order (i.e. check watchers first).
                Signals and child watchers are implemented as I/O watchers, and will
                be handled here by queueing them when their watcher gets executed.
              - If ev_break has been called, or EVRUN_ONCE or EVRUN_NOWAIT
                were used, or there are no active watchers, goto FINISH, otherwise
                continue with step LOOP.
              FINISH:
              - Reset the ev_break status iff it was EVBREAK_ONE.
              - Decrement the loop depth.
              - Return.

           Example: Queue some jobs and then loop until no events are outstanding anymore.

              ... queue jobs here, make sure they register event watchers as long
              ... as they still have work to do (even an idle watcher will do..)
              ev_run (my_loop, 0);
              ... jobs done or somebody called break. yeah!

       ev_break (loop, how)
           Can be used to make a call to "ev_run" return early (but only after it has processed
           all outstanding events). The "how" argument must be either "EVBREAK_ONE", which will
           make the innermost "ev_run" call return, or "EVBREAK_ALL", which will make all nested
           "ev_run" calls return.

           This "break state" will be cleared on the next call to "ev_run".

           It is safe to call "ev_break" from outside any "ev_run" calls, too, in which case it
           will have no effect.

       ev_ref (loop)
       ev_unref (loop)
           Ref/unref can be used to add or remove a reference count on the event loop: Every
           watcher keeps one reference, and as long as the reference count is nonzero, "ev_run"
           will not return on its own.

           This is useful when you have a watcher that you never intend to unregister, but that
           nevertheless should not keep "ev_run" from returning. In such a case, call "ev_unref"
           after starting, and "ev_ref" before stopping it.

           As an example, libev itself uses this for its internal signal pipe: It is not visible
           to the libev user and should not keep "ev_run" from exiting if no event watchers
           registered by it are active. It is also an excellent way to do this for generic
           recurring timers or from within third-party libraries. Just remember to unref after
           start and ref before stop (but only if the watcher wasn't active before, or was active
           before, respectively. Note also that libev might stop watchers itself (e.g. non-
           repeating timers) in which case you have to "ev_ref" in the callback).

           Example: Create a signal watcher, but keep it from keeping "ev_run" running when
           nothing else is active.

              ev_signal exitsig;
              ev_signal_init (&exitsig, sig_cb, SIGINT);
              ev_signal_start (loop, &exitsig);
              ev_unref (loop);

           Example: For some weird reason, unregister the above signal handler again.

              ev_ref (loop);
              ev_signal_stop (loop, &exitsig);

       ev_set_io_collect_interval (loop, ev_tstamp interval)
       ev_set_timeout_collect_interval (loop, ev_tstamp interval)
           These advanced functions influence the time that libev will spend waiting for events.
           Both time intervals are by default 0, meaning that libev will try to invoke
           timer/periodic callbacks and I/O callbacks with minimum latency.

           Setting these to a higher value (the "interval" must be >= 0) allows libev to delay
           invocation of I/O and timer/periodic callbacks to increase efficiency of loop
           iterations (or to increase power-saving opportunities).

           The idea is that sometimes your program runs just fast enough to handle one (or very
           few) event(s) per loop iteration. While this makes the program responsive, it also
           wastes a lot of CPU time to poll for new events, especially with backends like "select
           ()" which have a high overhead for the actual polling but can deliver many events at
           once.

           By setting a higher io collect interval you allow libev to spend more time collecting
           I/O events, so you can handle more events per iteration, at the cost of increasing
           latency. Timeouts (both "ev_periodic" and "ev_timer") will not be affected. Setting
           this to a non-null value will introduce an additional "ev_sleep ()" call into most
           loop iterations. The sleep time ensures that libev will not poll for I/O events more
           often then once per this interval, on average (as long as the host time resolution is
           good enough).

           Likewise, by setting a higher timeout collect interval you allow libev to spend more
           time collecting timeouts, at the expense of increased latency/jitter/inexactness (the
           watcher callback will be called later). "ev_io" watchers will not be affected. Setting
           this to a non-null value will not introduce any overhead in libev.

           Many (busy) programs can usually benefit by setting the I/O collect interval to a
           value near 0.1 or so, which is often enough for interactive servers (of course not for
           games), likewise for timeouts. It usually doesn't make much sense to set it to a lower
           value than 0.01, as this approaches the timing granularity of most systems. Note that
           if you do transactions with the outside world and you can't increase the parallelity,
           then this setting will limit your transaction rate (if you need to poll once per
           transaction and the I/O collect interval is 0.01, then you can't do more than 100
           transactions per second).

           Setting the timeout collect interval can improve the opportunity for saving power, as
           the program will "bundle" timer callback invocations that are "near" in time together,
           by delaying some, thus reducing the number of times the process sleeps and wakes up
           again. Another useful technique to reduce iterations/wake-ups is to use "ev_periodic"
           watchers and make sure they fire on, say, one-second boundaries only.

           Example: we only need 0.1s timeout granularity, and we wish not to poll more often
           than 100 times per second:

              ev_set_timeout_collect_interval (EV_DEFAULT_UC_ 0.1);
              ev_set_io_collect_interval (EV_DEFAULT_UC_ 0.01);

       ev_invoke_pending (loop)
           This call will simply invoke all pending watchers while resetting their pending state.
           Normally, "ev_run" does this automatically when required, but when overriding the
           invoke callback this call comes handy. This function can be invoked from a watcher -
           this can be useful for example when you want to do some lengthy calculation and want
           to pass further event handling to another thread (you still have to make sure only one
           thread executes within "ev_invoke_pending" or "ev_run" of course).

       int ev_pending_count (loop)
           Returns the number of pending watchers - zero indicates that no watchers are pending.

       ev_set_invoke_pending_cb (loop, void (*invoke_pending_cb)(EV_P))
           This overrides the invoke pending functionality of the loop: Instead of invoking all
           pending watchers when there are any, "ev_run" will call this callback instead. This is
           useful, for example, when you want to invoke the actual watchers inside another
           context (another thread etc.).

           If you want to reset the callback, use "ev_invoke_pending" as new callback.

       ev_set_loop_release_cb (loop, void (*release)(EV_P) throw (), void (*acquire)(EV_P) throw
       ())
           Sometimes you want to share the same loop between multiple threads. This can be done
           relatively simply by putting mutex_lock/unlock calls around each call to a libev
           function.

           However, "ev_run" can run an indefinite time, so it is not feasible to wait for it to
           return. One way around this is to wake up the event loop via "ev_break" and
           "ev_async_send", another way is to set these release and acquire callbacks on the
           loop.

           When set, then "release" will be called just before the thread is suspended waiting
           for new events, and "acquire" is called just afterwards.

           Ideally, "release" will just call your mutex_unlock function, and "acquire" will just
           call the mutex_lock function again.

           While event loop modifications are allowed between invocations of "release" and
           "acquire" (that's their only purpose after all), no modifications done will affect the
           event loop, i.e. adding watchers will have no effect on the set of file descriptors
           being watched, or the time waited. Use an "ev_async" watcher to wake up "ev_run" when
           you want it to take note of any changes you made.

           In theory, threads executing "ev_run" will be async-cancel safe between invocations of
           "release" and "acquire".

           See also the locking example in the "THREADS" section later in this document.

       ev_set_userdata (loop, void *data)
       void *ev_userdata (loop)
           Set and retrieve a single "void *" associated with a loop. When "ev_set_userdata" has
           never been called, then "ev_userdata" returns 0.

           These two functions can be used to associate arbitrary data with a loop, and are
           intended solely for the "invoke_pending_cb", "release" and "acquire" callbacks
           described above, but of course can be (ab-)used for any other purpose as well.

       ev_verify (loop)
           This function only does something when "EV_VERIFY" support has been compiled in, which
           is the default for non-minimal builds. It tries to go through all internal structures
           and checks them for validity. If anything is found to be inconsistent, it will print
           an error message to standard error and call "abort ()".

           This can be used to catch bugs inside libev itself: under normal circumstances, this
           function will never abort as of course libev keeps its data structures consistent.

ANATOMY OF A WATCHER

       In the following description, uppercase "TYPE" in names stands for the watcher type, e.g.
       "ev_TYPE_start" can mean "ev_timer_start" for timer watchers and "ev_io_start" for I/O
       watchers.

       A watcher is an opaque structure that you allocate and register to record your interest in
       some event. To make a concrete example, imagine you want to wait for STDIN to become
       readable, you would create an "ev_io" watcher for that:

          static void my_cb (struct ev_loop *loop, ev_io *w, int revents)
          {
            ev_io_stop (w);
            ev_break (loop, EVBREAK_ALL);
          }

          struct ev_loop *loop = ev_default_loop (0);

          ev_io stdin_watcher;

          ev_init (&stdin_watcher, my_cb);
          ev_io_set (&stdin_watcher, STDIN_FILENO, EV_READ);
          ev_io_start (loop, &stdin_watcher);

          ev_run (loop, 0);

       As you can see, you are responsible for allocating the memory for your watcher structures
       (and it is usually a bad idea to do this on the stack).

       Each watcher has an associated watcher structure (called "struct ev_TYPE" or simply
       "ev_TYPE", as typedefs are provided for all watcher structs).

       Each watcher structure must be initialised by a call to "ev_init (watcher *, callback)",
       which expects a callback to be provided. This callback is invoked each time the event
       occurs (or, in the case of I/O watchers, each time the event loop detects that the file
       descriptor given is readable and/or writable).

       Each watcher type further has its own "ev_TYPE_set (watcher *, ...)"  macro to configure
       it, with arguments specific to the watcher type. There is also a macro to combine
       initialisation and setting in one call: "ev_TYPE_init (watcher *, callback, ...)".

       To make the watcher actually watch out for events, you have to start it with a watcher-
       specific start function ("ev_TYPE_start (loop, watcher *)"), and you can stop watching for
       events at any time by calling the corresponding stop function ("ev_TYPE_stop (loop,
       watcher *)".

       As long as your watcher is active (has been started but not stopped) you must not touch
       the values stored in it. Most specifically you must never reinitialise it or call its
       "ev_TYPE_set" macro.

       Each and every callback receives the event loop pointer as first, the registered watcher
       structure as second, and a bitset of received events as third argument.

       The received events usually include a single bit per event type received (you can receive
       multiple events at the same time). The possible bit masks are:

       "EV_READ"
       "EV_WRITE"
           The file descriptor in the "ev_io" watcher has become readable and/or writable.

       "EV_TIMER"
           The "ev_timer" watcher has timed out.

       "EV_PERIODIC"
           The "ev_periodic" watcher has timed out.

       "EV_SIGNAL"
           The signal specified in the "ev_signal" watcher has been received by a thread.

       "EV_CHILD"
           The pid specified in the "ev_child" watcher has received a status change.

       "EV_STAT"
           The path specified in the "ev_stat" watcher changed its attributes somehow.

       "EV_IDLE"
           The "ev_idle" watcher has determined that you have nothing better to do.

       "EV_PREPARE"
       "EV_CHECK"
           All "ev_prepare" watchers are invoked just before "ev_run" starts to gather new
           events, and all "ev_check" watchers are queued (not invoked) just after "ev_run" has
           gathered them, but before it queues any callbacks for any received events. That means
           "ev_prepare" watchers are the last watchers invoked before the event loop sleeps or
           polls for new events, and "ev_check" watchers will be invoked before any other
           watchers of the same or lower priority within an event loop iteration.

           Callbacks of both watcher types can start and stop as many watchers as they want, and
           all of them will be taken into account (for example, a "ev_prepare" watcher might
           start an idle watcher to keep "ev_run" from blocking).

       "EV_EMBED"
           The embedded event loop specified in the "ev_embed" watcher needs attention.

       "EV_FORK"
           The event loop has been resumed in the child process after fork (see "ev_fork").

       "EV_CLEANUP"
           The event loop is about to be destroyed (see "ev_cleanup").

       "EV_ASYNC"
           The given async watcher has been asynchronously notified (see "ev_async").

       "EV_CUSTOM"
           Not ever sent (or otherwise used) by libev itself, but can be freely used by libev
           users to signal watchers (e.g. via "ev_feed_event").

       "EV_ERROR"
           An unspecified error has occurred, the watcher has been stopped. This might happen
           because the watcher could not be properly started because libev ran out of memory, a
           file descriptor was found to be closed or any other problem. Libev considers these
           application bugs.

           You best act on it by reporting the problem and somehow coping with the watcher being
           stopped. Note that well-written programs should not receive an error ever, so when
           your watcher receives it, this usually indicates a bug in your program.

           Libev will usually signal a few "dummy" events together with an error, for example it
           might indicate that a fd is readable or writable, and if your callbacks is well-
           written it can just attempt the operation and cope with the error from read() or
           write(). This will not work in multi-threaded programs, though, as the fd could
           already be closed and reused for another thing, so beware.

   GENERIC WATCHER FUNCTIONS
       "ev_init" (ev_TYPE *watcher, callback)
           This macro initialises the generic portion of a watcher. The contents of the watcher
           object can be arbitrary (so "malloc" will do). Only the generic parts of the watcher
           are initialised, you need to call the type-specific "ev_TYPE_set" macro afterwards to
           initialise the type-specific parts. For each type there is also a "ev_TYPE_init" macro
           which rolls both calls into one.

           You can reinitialise a watcher at any time as long as it has been stopped (or never
           started) and there are no pending events outstanding.

           The callback is always of type "void (*)(struct ev_loop *loop, ev_TYPE *watcher, int
           revents)".

           Example: Initialise an "ev_io" watcher in two steps.

              ev_io w;
              ev_init (&w, my_cb);
              ev_io_set (&w, STDIN_FILENO, EV_READ);

       "ev_TYPE_set" (ev_TYPE *watcher, [args])
           This macro initialises the type-specific parts of a watcher. You need to call
           "ev_init" at least once before you call this macro, but you can call "ev_TYPE_set" any
           number of times. You must not, however, call this macro on a watcher that is active
           (it can be pending, however, which is a difference to the "ev_init" macro).

           Although some watcher types do not have type-specific arguments (e.g. "ev_prepare")
           you still need to call its "set" macro.

           See "ev_init", above, for an example.

       "ev_TYPE_init" (ev_TYPE *watcher, callback, [args])
           This convenience macro rolls both "ev_init" and "ev_TYPE_set" macro calls into a
           single call. This is the most convenient method to initialise a watcher. The same
           limitations apply, of course.

           Example: Initialise and set an "ev_io" watcher in one step.

              ev_io_init (&w, my_cb, STDIN_FILENO, EV_READ);

       "ev_TYPE_start" (loop, ev_TYPE *watcher)
           Starts (activates) the given watcher. Only active watchers will receive events. If the
           watcher is already active nothing will happen.

           Example: Start the "ev_io" watcher that is being abused as example in this whole
           section.

              ev_io_start (EV_DEFAULT_UC, &w);

       "ev_TYPE_stop" (loop, ev_TYPE *watcher)
           Stops the given watcher if active, and clears the pending status (whether the watcher
           was active or not).

           It is possible that stopped watchers are pending - for example, non-repeating timers
           are being stopped when they become pending - but calling "ev_TYPE_stop" ensures that
           the watcher is neither active nor pending. If you want to free or reuse the memory
           used by the watcher it is therefore a good idea to always call its "ev_TYPE_stop"
           function.

       bool ev_is_active (ev_TYPE *watcher)
           Returns a true value iff the watcher is active (i.e. it has been started and not yet
           been stopped). As long as a watcher is active you must not modify it.

       bool ev_is_pending (ev_TYPE *watcher)
           Returns a true value iff the watcher is pending, (i.e. it has outstanding events but
           its callback has not yet been invoked). As long as a watcher is pending (but not
           active) you must not call an init function on it (but "ev_TYPE_set" is safe), you must
           not change its priority, and you must make sure the watcher is available to libev
           (e.g. you cannot "free ()" it).

       callback ev_cb (ev_TYPE *watcher)
           Returns the callback currently set on the watcher.

       ev_set_cb (ev_TYPE *watcher, callback)
           Change the callback. You can change the callback at virtually any time (modulo
           threads).

       ev_set_priority (ev_TYPE *watcher, int priority)
       int ev_priority (ev_TYPE *watcher)
           Set and query the priority of the watcher. The priority is a small integer between
           "EV_MAXPRI" (default: 2) and "EV_MINPRI" (default: "-2"). Pending watchers with higher
           priority will be invoked before watchers with lower priority, but priority will not
           keep watchers from being executed (except for "ev_idle" watchers).

           If you need to suppress invocation when higher priority events are pending you need to
           look at "ev_idle" watchers, which provide this functionality.

           You must not change the priority of a watcher as long as it is active or pending.

           Setting a priority outside the range of "EV_MINPRI" to "EV_MAXPRI" is fine, as long as
           you do not mind that the priority value you query might or might not have been clamped
           to the valid range.

           The default priority used by watchers when no priority has been set is always 0, which
           is supposed to not be too high and not be too low :).

           See "WATCHER PRIORITY MODELS", below, for a more thorough treatment of priorities.

       ev_invoke (loop, ev_TYPE *watcher, int revents)
           Invoke the "watcher" with the given "loop" and "revents". Neither "loop" nor "revents"
           need to be valid as long as the watcher callback can deal with that fact, as both are
           simply passed through to the callback.

       int ev_clear_pending (loop, ev_TYPE *watcher)
           If the watcher is pending, this function clears its pending status and returns its
           "revents" bitset (as if its callback was invoked). If the watcher isn't pending it
           does nothing and returns 0.

           Sometimes it can be useful to "poll" a watcher instead of waiting for its callback to
           be invoked, which can be accomplished with this function.

       ev_feed_event (loop, ev_TYPE *watcher, int revents)
           Feeds the given event set into the event loop, as if the specified event had happened
           for the specified watcher (which must be a pointer to an initialised but not
           necessarily started event watcher). Obviously you must not free the watcher as long as
           it has pending events.

           Stopping the watcher, letting libev invoke it, or calling "ev_clear_pending" will
           clear the pending event, even if the watcher was not started in the first place.

           See also "ev_feed_fd_event" and "ev_feed_signal_event" for related functions that do
           not need a watcher.

       See also the "ASSOCIATING CUSTOM DATA WITH A WATCHER" and "BUILDING YOUR OWN COMPOSITE
       WATCHERS" idioms.

   WATCHER STATES
       There are various watcher states mentioned throughout this manual - active, pending and so
       on. In this section these states and the rules to transition between them will be
       described in more detail - and while these rules might look complicated, they usually do
       "the right thing".

       initialised
           Before a watcher can be registered with the event loop it has to be initialised. This
           can be done with a call to "ev_TYPE_init", or calls to "ev_init" followed by the
           watcher-specific "ev_TYPE_set" function.

           In this state it is simply some block of memory that is suitable for use in an event
           loop. It can be moved around, freed, reused etc. at will - as long as you either keep
           the memory contents intact, or call "ev_TYPE_init" again.

       started/running/active
           Once a watcher has been started with a call to "ev_TYPE_start" it becomes property of
           the event loop, and is actively waiting for events. While in this state it cannot be
           accessed (except in a few documented ways), moved, freed or anything else - the only
           legal thing is to keep a pointer to it, and call libev functions on it that are
           documented to work on active watchers.

       pending
           If a watcher is active and libev determines that an event it is interested in has
           occurred (such as a timer expiring), it will become pending. It will stay in this
           pending state until either it is stopped or its callback is about to be invoked, so it
           is not normally pending inside the watcher callback.

           The watcher might or might not be active while it is pending (for example, an expired
           non-repeating timer can be pending but no longer active). If it is stopped, it can be
           freely accessed (e.g. by calling "ev_TYPE_set"), but it is still property of the event
           loop at this time, so cannot be moved, freed or reused. And if it is active the rules
           described in the previous item still apply.

           It is also possible to feed an event on a watcher that is not active (e.g.  via
           "ev_feed_event"), in which case it becomes pending without being active.

       stopped
           A watcher can be stopped implicitly by libev (in which case it might still be
           pending), or explicitly by calling its "ev_TYPE_stop" function. The latter will clear
           any pending state the watcher might be in, regardless of whether it was active or not,
           so stopping a watcher explicitly before freeing it is often a good idea.

           While stopped (and not pending) the watcher is essentially in the initialised state,
           that is, it can be reused, moved, modified in any way you wish (but when you trash the
           memory block, you need to "ev_TYPE_init" it again).

   WATCHER PRIORITY MODELS
       Many event loops support watcher priorities, which are usually small integers that
       influence the ordering of event callback invocation between watchers in some way, all else
       being equal.

       In libev, Watcher priorities can be set using "ev_set_priority". See its description for
       the more technical details such as the actual priority range.

       There are two common ways how these these priorities are being interpreted by event loops:

       In the more common lock-out model, higher priorities "lock out" invocation of lower
       priority watchers, which means as long as higher priority watchers receive events, lower
       priority watchers are not being invoked.

       The less common only-for-ordering model uses priorities solely to order callback
       invocation within a single event loop iteration: Higher priority watchers are invoked
       before lower priority ones, but they all get invoked before polling for new events.

       Libev uses the second (only-for-ordering) model for all its watchers except for idle
       watchers (which use the lock-out model).

       The rationale behind this is that implementing the lock-out model for watchers is not well
       supported by most kernel interfaces, and most event libraries will just poll for the same
       events again and again as long as their callbacks have not been executed, which is very
       inefficient in the common case of one high-priority watcher locking out a mass of lower
       priority ones.

       Static (ordering) priorities are most useful when you have two or more watchers handling
       the same resource: a typical usage example is having an "ev_io" watcher to receive data,
       and an associated "ev_timer" to handle timeouts. Under load, data might be received while
       the program handles other jobs, but since timers normally get invoked first, the timeout
       handler will be executed before checking for data. In that case, giving the timer a lower
       priority than the I/O watcher ensures that I/O will be handled first even under adverse
       conditions (which is usually, but not always, what you want).

       Since idle watchers use the "lock-out" model, meaning that idle watchers will only be
       executed when no same or higher priority watchers have received events, they can be used
       to implement the "lock-out" model when required.

       For example, to emulate how many other event libraries handle priorities, you can
       associate an "ev_idle" watcher to each such watcher, and in the normal watcher callback,
       you just start the idle watcher. The real processing is done in the idle watcher callback.
       This causes libev to continuously poll and process kernel event data for the watcher, but
       when the lock-out case is known to be rare (which in turn is rare :), this is workable.

       Usually, however, the lock-out model implemented that way will perform miserably under the
       type of load it was designed to handle. In that case, it might be preferable to stop the
       real watcher before starting the idle watcher, so the kernel will not have to process the
       event in case the actual processing will be delayed for considerable time.

       Here is an example of an I/O watcher that should run at a strictly lower priority than the
       default, and which should only process data when no other events are pending:

          ev_idle idle; // actual processing watcher
          ev_io io;     // actual event watcher

          static void
          io_cb (EV_P_ ev_io *w, int revents)
          {
            // stop the I/O watcher, we received the event, but
            // are not yet ready to handle it.
            ev_io_stop (EV_A_ w);

            // start the idle watcher to handle the actual event.
            // it will not be executed as long as other watchers
            // with the default priority are receiving events.
            ev_idle_start (EV_A_ &idle);
          }

          static void
          idle_cb (EV_P_ ev_idle *w, int revents)
          {
            // actual processing
            read (STDIN_FILENO, ...);

            // have to start the I/O watcher again, as
            // we have handled the event
            ev_io_start (EV_P_ &io);
          }

          // initialisation
          ev_idle_init (&idle, idle_cb);
          ev_io_init (&io, io_cb, STDIN_FILENO, EV_READ);
          ev_io_start (EV_DEFAULT_ &io);

       In the "real" world, it might also be beneficial to start a timer, so that low-priority
       connections can not be locked out forever under load. This enables your program to keep a
       lower latency for important connections during short periods of high load, while not
       completely locking out less important ones.

WATCHER TYPES

       This section describes each watcher in detail, but will not repeat information given in
       the last section. Any initialisation/set macros, functions and members specific to the
       watcher type are explained.

       Members are additionally marked with either [read-only], meaning that, while the watcher
       is active, you can look at the member and expect some sensible content, but you must not
       modify it (you can modify it while the watcher is stopped to your hearts content), or
       [read-write], which means you can expect it to have some sensible content while the
       watcher is active, but you can also modify it. Modifying it may not do something sensible
       or take immediate effect (or do anything at all), but libev will not crash or malfunction
       in any way.

   "ev_io" - is this file descriptor readable or writable?
       I/O watchers check whether a file descriptor is readable or writable in each iteration of
       the event loop, or, more precisely, when reading would not block the process and writing
       would at least be able to write some data. This behaviour is called level-triggering
       because you keep receiving events as long as the condition persists. Remember you can stop
       the watcher if you don't want to act on the event and neither want to receive future
       events.

       In general you can register as many read and/or write event watchers per fd as you want
       (as long as you don't confuse yourself). Setting all file descriptors to non-blocking mode
       is also usually a good idea (but not required if you know what you are doing).

       Another thing you have to watch out for is that it is quite easy to receive "spurious"
       readiness notifications, that is, your callback might be called with "EV_READ" but a
       subsequent "read"(2) will actually block because there is no data. It is very easy to get
       into this situation even with a relatively standard program structure. Thus it is best to
       always use non-blocking I/O: An extra "read"(2) returning "EAGAIN" is far preferable to a
       program hanging until some data arrives.

       If you cannot run the fd in non-blocking mode (for example you should not play around with
       an Xlib connection), then you have to separately re-test whether a file descriptor is
       really ready with a known-to-be good interface such as poll (fortunately in the case of
       Xlib, it already does this on its own, so its quite safe to use). Some people additionally
       use "SIGALRM" and an interval timer, just to be sure you won't block indefinitely.

       But really, best use non-blocking mode.

       The special problem of disappearing file descriptors

       Some backends (e.g. kqueue, epoll) need to be told about closing a file descriptor (either
       due to calling "close" explicitly or any other means, such as "dup2"). The reason is that
       you register interest in some file descriptor, but when it goes away, the operating system
       will silently drop this interest. If another file descriptor with the same number then is
       registered with libev, there is no efficient way to see that this is, in fact, a different
       file descriptor.

       To avoid having to explicitly tell libev about such cases, libev follows the following
       policy:  Each time "ev_io_set" is being called, libev will assume that this is potentially
       a new file descriptor, otherwise it is assumed that the file descriptor stays the same.
       That means that you have to call "ev_io_set" (or "ev_io_init") when you change the
       descriptor even if the file descriptor number itself did not change.

       This is how one would do it normally anyway, the important point is that the libev
       application should not optimise around libev but should leave optimisations to libev.

       The special problem of dup'ed file descriptors

       Some backends (e.g. epoll), cannot register events for file descriptors, but only events
       for the underlying file descriptions. That means when you have "dup ()"'ed file
       descriptors or weirder constellations, and register events for them, only one file
       descriptor might actually receive events.

       There is no workaround possible except not registering events for potentially "dup ()"'ed
       file descriptors, or to resort to "EVBACKEND_SELECT" or "EVBACKEND_POLL".

       The special problem of files

       Many people try to use "select" (or libev) on file descriptors representing files, and
       expect it to become ready when their program doesn't block on disk accesses (which can
       take a long time on their own).

       However, this cannot ever work in the "expected" way - you get a readiness notification as
       soon as the kernel knows whether and how much data is there, and in the case of open
       files, that's always the case, so you always get a readiness notification instantly, and
       your read (or possibly write) will still block on the disk I/O.

       Another way to view it is that in the case of sockets, pipes, character devices and so on,
       there is another party (the sender) that delivers data on its own, but in the case of
       files, there is no such thing: the disk will not send data on its own, simply because it
       doesn't know what you wish to read - you would first have to request some data.

       Since files are typically not-so-well supported by advanced notification mechanism, libev
       tries hard to emulate POSIX behaviour with respect to files, even though you should not
       use it. The reason for this is convenience: sometimes you want to watch STDIN or STDOUT,
       which is usually a tty, often a pipe, but also sometimes files or special devices (for
       example, "epoll" on Linux works with /dev/random but not with /dev/urandom), and even
       though the file might better be served with asynchronous I/O instead of with non-blocking
       I/O, it is still useful when it "just works" instead of freezing.

       So avoid file descriptors pointing to files when you know it (e.g. use libeio), but use
       them when it is convenient, e.g. for STDIN/STDOUT, or when you rarely read from a file
       instead of from a socket, and want to reuse the same code path.

       The special problem of fork

       Some backends (epoll, kqueue) do not support "fork ()" at all or exhibit useless
       behaviour. Libev fully supports fork, but needs to be told about it in the child if you
       want to continue to use it in the child.

       To support fork in your child processes, you have to call "ev_loop_fork ()" after a fork
       in the child, enable "EVFLAG_FORKCHECK", or resort to "EVBACKEND_SELECT" or
       "EVBACKEND_POLL".

       The special problem of SIGPIPE

       While not really specific to libev, it is easy to forget about "SIGPIPE": when writing to
       a pipe whose other end has been closed, your program gets sent a SIGPIPE, which, by
       default, aborts your program. For most programs this is sensible behaviour, for daemons,
       this is usually undesirable.

       So when you encounter spurious, unexplained daemon exits, make sure you ignore SIGPIPE
       (and maybe make sure you log the exit status of your daemon somewhere, as that would have
       given you a big clue).

       The special problem of accept()ing when you can't

       Many implementations of the POSIX "accept" function (for example, found in post-2004
       Linux) have the peculiar behaviour of not removing a connection from the pending queue in
       all error cases.

       For example, larger servers often run out of file descriptors (because of resource
       limits), causing "accept" to fail with "ENFILE" but not rejecting the connection, leading
       to libev signalling readiness on the next iteration again (the connection still exists
       after all), and typically causing the program to loop at 100% CPU usage.

       Unfortunately, the set of errors that cause this issue differs between operating systems,
       there is usually little the app can do to remedy the situation, and no known thread-safe
       method of removing the connection to cope with overload is known (to me).

       One of the easiest ways to handle this situation is to just ignore it - when the program
       encounters an overload, it will just loop until the situation is over. While this is a
       form of busy waiting, no OS offers an event-based way to handle this situation, so it's
       the best one can do.

       A better way to handle the situation is to log any errors other than "EAGAIN" and
       "EWOULDBLOCK", making sure not to flood the log with such messages, and continue as usual,
       which at least gives the user an idea of what could be wrong ("raise the ulimit!"). For
       extra points one could stop the "ev_io" watcher on the listening fd "for a while", which
       reduces CPU usage.

       If your program is single-threaded, then you could also keep a dummy file descriptor for
       overload situations (e.g. by opening /dev/null), and when you run into "ENFILE" or
       "EMFILE", close it, run "accept", close that fd, and create a new dummy fd. This will
       gracefully refuse clients under typical overload conditions.

       The last way to handle it is to simply log the error and "exit", as is often done with
       "malloc" failures, but this results in an easy opportunity for a DoS attack.

       Watcher-Specific Functions

       ev_io_init (ev_io *, callback, int fd, int events)
       ev_io_set (ev_io *, int fd, int events)
           Configures an "ev_io" watcher. The "fd" is the file descriptor to receive events for
           and "events" is either "EV_READ", "EV_WRITE" or "EV_READ | EV_WRITE", to express the
           desire to receive the given events.

       int fd [read-only]
           The file descriptor being watched.

       int events [read-only]
           The events being watched.

       Examples

       Example: Call "stdin_readable_cb" when STDIN_FILENO has become, well readable, but only
       once. Since it is likely line-buffered, you could attempt to read a whole line in the
       callback.

          static void
          stdin_readable_cb (struct ev_loop *loop, ev_io *w, int revents)
          {
             ev_io_stop (loop, w);
            .. read from stdin here (or from w->fd) and handle any I/O errors
          }

          ...
          struct ev_loop *loop = ev_default_init (0);
          ev_io stdin_readable;
          ev_io_init (&stdin_readable, stdin_readable_cb, STDIN_FILENO, EV_READ);
          ev_io_start (loop, &stdin_readable);
          ev_run (loop, 0);

   "ev_timer" - relative and optionally repeating timeouts
       Timer watchers are simple relative timers that generate an event after a given time, and
       optionally repeating in regular intervals after that.

       The timers are based on real time, that is, if you register an event that times out after
       an hour and you reset your system clock to January last year, it will still time out after
       (roughly) one hour. "Roughly" because detecting time jumps is hard, and some inaccuracies
       are unavoidable (the monotonic clock option helps a lot here).

       The callback is guaranteed to be invoked only after its timeout has passed (not at, so on
       systems with very low-resolution clocks this might introduce a small delay, see "the
       special problem of being too early", below). If multiple timers become ready during the
       same loop iteration then the ones with earlier time-out values are invoked before ones of
       the same priority with later time-out values (but this is no longer true when a callback
       calls "ev_run" recursively).

       Be smart about timeouts

       Many real-world problems involve some kind of timeout, usually for error recovery. A
       typical example is an HTTP request - if the other side hangs, you want to raise some error
       after a while.

       What follows are some ways to handle this problem, from obvious and inefficient to smart
       and efficient.

       In the following, a 60 second activity timeout is assumed - a timeout that gets reset to
       60 seconds each time there is activity (e.g. each time some data or other life sign was
       received).

       1. Use a timer and stop, reinitialise and start it on activity.
           This is the most obvious, but not the most simple way: In the beginning, start the
           watcher:

              ev_timer_init (timer, callback, 60., 0.);
              ev_timer_start (loop, timer);

           Then, each time there is some activity, "ev_timer_stop" it, initialise it and start it
           again:

              ev_timer_stop (loop, timer);
              ev_timer_set (timer, 60., 0.);
              ev_timer_start (loop, timer);

           This is relatively simple to implement, but means that each time there is some
           activity, libev will first have to remove the timer from its internal data structure
           and then add it again. Libev tries to be fast, but it's still not a constant-time
           operation.

       2. Use a timer and re-start it with "ev_timer_again" inactivity.
           This is the easiest way, and involves using "ev_timer_again" instead of
           "ev_timer_start".

           To implement this, configure an "ev_timer" with a "repeat" value of 60 and then call
           "ev_timer_again" at start and each time you successfully read or write some data. If
           you go into an idle state where you do not expect data to travel on the socket, you
           can "ev_timer_stop" the timer, and "ev_timer_again" will automatically restart it if
           need be.

           That means you can ignore both the "ev_timer_start" function and the "after" argument
           to "ev_timer_set", and only ever use the "repeat" member and "ev_timer_again".

           At start:

              ev_init (timer, callback);
              timer->repeat = 60.;
              ev_timer_again (loop, timer);

           Each time there is some activity:

              ev_timer_again (loop, timer);

           It is even possible to change the time-out on the fly, regardless of whether the
           watcher is active or not:

              timer->repeat = 30.;
              ev_timer_again (loop, timer);

           This is slightly more efficient then stopping/starting the timer each time you want to
           modify its timeout value, as libev does not have to completely remove and re-insert
           the timer from/into its internal data structure.

           It is, however, even simpler than the "obvious" way to do it.

       3. Let the timer time out, but then re-arm it as required.
           This method is more tricky, but usually most efficient: Most timeouts are relatively
           long compared to the intervals between other activity - in our example, within 60
           seconds, there are usually many I/O events with associated activity resets.

           In this case, it would be more efficient to leave the "ev_timer" alone, but remember
           the time of last activity, and check for a real timeout only within the callback:

              ev_tstamp timeout = 60.;
              ev_tstamp last_activity; // time of last activity
              ev_timer timer;

              static void
              callback (EV_P_ ev_timer *w, int revents)
              {
                // calculate when the timeout would happen
                ev_tstamp after = last_activity - ev_now (EV_A) + timeout;

                // if negative, it means we the timeout already occurred
                if (after < 0.)
                  {
                    // timeout occurred, take action
                  }
                else
                  {
                    // callback was invoked, but there was some recent
                    // activity. simply restart the timer to time out
                    // after "after" seconds, which is the earliest time
                    // the timeout can occur.
                    ev_timer_set (w, after, 0.);
                    ev_timer_start (EV_A_ w);
                  }
              }

           To summarise the callback: first calculate in how many seconds the timeout will occur
           (by calculating the absolute time when it would occur, "last_activity + timeout", and
           subtracting the current time, "ev_now (EV_A)" from that).

           If this value is negative, then we are already past the timeout, i.e. we timed out,
           and need to do whatever is needed in this case.

           Otherwise, we now the earliest time at which the timeout would trigger, and simply
           start the timer with this timeout value.

           In other words, each time the callback is invoked it will check whether the timeout
           occurred. If not, it will simply reschedule itself to check again at the earliest time
           it could time out. Rinse. Repeat.

           This scheme causes more callback invocations (about one every 60 seconds minus half
           the average time between activity), but virtually no calls to libev to change the
           timeout.

           To start the machinery, simply initialise the watcher and set "last_activity" to the
           current time (meaning there was some activity just now), then call the callback, which
           will "do the right thing" and start the timer:

              last_activity = ev_now (EV_A);
              ev_init (&timer, callback);
              callback (EV_A_ &timer, 0);

           When there is some activity, simply store the current time in "last_activity", no
           libev calls at all:

              if (activity detected)
                last_activity = ev_now (EV_A);

           When your timeout value changes, then the timeout can be changed by simply providing a
           new value, stopping the timer and calling the callback, which will again do the right
           thing (for example, time out immediately :).

              timeout = new_value;
              ev_timer_stop (EV_A_ &timer);
              callback (EV_A_ &timer, 0);

           This technique is slightly more complex, but in most cases where the time-out is
           unlikely to be triggered, much more efficient.

       4. Wee, just use a double-linked list for your timeouts.
           If there is not one request, but many thousands (millions...), all employing some kind
           of timeout with the same timeout value, then one can do even better:

           When starting the timeout, calculate the timeout value and put the timeout at the end
           of the list.

           Then use an "ev_timer" to fire when the timeout at the beginning of the list is
           expected to fire (for example, using the technique #3).

           When there is some activity, remove the timer from the list, recalculate the timeout,
           append it to the end of the list again, and make sure to update the "ev_timer" if it
           was taken from the beginning of the list.

           This way, one can manage an unlimited number of timeouts in O(1) time for starting,
           stopping and updating the timers, at the expense of a major complication, and having
           to use a constant timeout. The constant timeout ensures that the list stays sorted.

       So which method the best?

       Method #2 is a simple no-brain-required solution that is adequate in most situations.
       Method #3 requires a bit more thinking, but handles many cases better, and isn't very
       complicated either. In most case, choosing either one is fine, with #3 being better in
       typical situations.

       Method #1 is almost always a bad idea, and buys you nothing. Method #4 is rather
       complicated, but extremely efficient, something that really pays off after the first
       million or so of active timers, i.e. it's usually overkill :)

       The special problem of being too early

       If you ask a timer to call your callback after three seconds, then you expect it to be
       invoked after three seconds - but of course, this cannot be guaranteed to infinite
       precision. Less obviously, it cannot be guaranteed to any precision by libev - imagine
       somebody suspending the process with a STOP signal for a few hours for example.

       So, libev tries to invoke your callback as soon as possible after the delay has occurred,
       but cannot guarantee this.

       A less obvious failure mode is calling your callback too early: many event loops compare
       timestamps with a "elapsed delay >= requested delay", but this can cause your callback to
       be invoked much earlier than you would expect.

       To see why, imagine a system with a clock that only offers full second resolution (think
       windows if you can't come up with a broken enough OS yourself). If you schedule a one-
       second timer at the time 500.9, then the event loop will schedule your timeout to elapse
       at a system time of 500 (500.9 truncated to the resolution) + 1, or 501.

       If an event library looks at the timeout 0.1s later, it will see "501 >= 501" and invoke
       the callback 0.1s after it was started, even though a one-second delay was requested -
       this is being "too early", despite best intentions.

       This is the reason why libev will never invoke the callback if the elapsed delay equals
       the requested delay, but only when the elapsed delay is larger than the requested delay.
       In the example above, libev would only invoke the callback at system time 502, or 1.1s
       after the timer was started.

       So, while libev cannot guarantee that your callback will be invoked exactly when
       requested, it can and does guarantee that the requested delay has actually elapsed, or in
       other words, it always errs on the "too late" side of things.

       The special problem of time updates

       Establishing the current time is a costly operation (it usually takes at least one system
       call): EV therefore updates its idea of the current time only before and after "ev_run"
       collects new events, which causes a growing difference between "ev_now ()" and "ev_time
       ()" when handling lots of events in one iteration.

       The relative timeouts are calculated relative to the "ev_now ()" time. This is usually the
       right thing as this timestamp refers to the time of the event triggering whatever timeout
       you are modifying/starting. If you suspect event processing to be delayed and you need to
       base the timeout on the current time, use something like this to adjust for this:

          ev_timer_set (&timer, after + ev_now () - ev_time (), 0.);

       If the event loop is suspended for a long time, you can also force an update of the time
       returned by "ev_now ()" by calling "ev_now_update ()".

       The special problem of unsynchronised clocks

       Modern systems have a variety of clocks - libev itself uses the normal "wall clock" clock
       and, if available, the monotonic clock (to avoid time jumps).

       Neither of these clocks is synchronised with each other or any other clock on the system,
       so "ev_time ()" might return a considerably different time than "gettimeofday ()" or "time
       ()". On a GNU/Linux system, for example, a call to "gettimeofday" might return a second
       count that is one higher than a directly following call to "time".

       The moral of this is to only compare libev-related timestamps with "ev_time ()" and
       "ev_now ()", at least if you want better precision than a second or so.

       One more problem arises due to this lack of synchronisation: if libev uses the system
       monotonic clock and you compare timestamps from "ev_time" or "ev_now" from when you
       started your timer and when your callback is invoked, you will find that sometimes the
       callback is a bit "early".

       This is because "ev_timer"s work in real time, not wall clock time, so libev makes sure
       your callback is not invoked before the delay happened, measured according to the real
       time, not the system clock.

       If your timeouts are based on a physical timescale (e.g. "time out this connection after
       100 seconds") then this shouldn't bother you as it is exactly the right behaviour.

       If you want to compare wall clock/system timestamps to your timers, then you need to use
       "ev_periodic"s, as these are based on the wall clock time, where your comparisons will
       always generate correct results.

       The special problems of suspended animation

       When you leave the server world it is quite customary to hit machines that can
       suspend/hibernate - what happens to the clocks during such a suspend?

       Some quick tests made with a Linux 2.6.28 indicate that a suspend freezes all processes,
       while the clocks ("times", "CLOCK_MONOTONIC") continue to run until the system is
       suspended, but they will not advance while the system is suspended. That means, on resume,
       it will be as if the program was frozen for a few seconds, but the suspend time will not
       be counted towards "ev_timer" when a monotonic clock source is used. The real time clock
       advanced as expected, but if it is used as sole clocksource, then a long suspend would be
       detected as a time jump by libev, and timers would be adjusted accordingly.

       I would not be surprised to see different behaviour in different between operating
       systems, OS versions or even different hardware.

       The other form of suspend (job control, or sending a SIGSTOP) will see a time jump in the
       monotonic clocks and the realtime clock. If the program is suspended for a very long time,
       and monotonic clock sources are in use, then you can expect "ev_timer"s to expire as the
       full suspension time will be counted towards the timers. When no monotonic clock source is
       in use, then libev will again assume a timejump and adjust accordingly.

       It might be beneficial for this latter case to call "ev_suspend" and "ev_resume" in code
       that handles "SIGTSTP", to at least get deterministic behaviour in this case (you can do
       nothing against "SIGSTOP").

       Watcher-Specific Functions and Data Members

       ev_timer_init (ev_timer *, callback, ev_tstamp after, ev_tstamp repeat)
       ev_timer_set (ev_timer *, ev_tstamp after, ev_tstamp repeat)
           Configure the timer to trigger after "after" seconds. If "repeat" is 0., then it will
           automatically be stopped once the timeout is reached. If it is positive, then the
           timer will automatically be configured to trigger again "repeat" seconds later, again,
           and again, until stopped manually.

           The timer itself will do a best-effort at avoiding drift, that is, if you configure a
           timer to trigger every 10 seconds, then it will normally trigger at exactly 10 second
           intervals. If, however, your program cannot keep up with the timer (because it takes
           longer than those 10 seconds to do stuff) the timer will not fire more than once per
           event loop iteration.

       ev_timer_again (loop, ev_timer *)
           This will act as if the timer timed out, and restarts it again if it is repeating. It
           basically works like calling "ev_timer_stop", updating the timeout to the "repeat"
           value and calling "ev_timer_start".

           The exact semantics are as in the following rules, all of which will be applied to the
           watcher:

           If the timer is pending, the pending status is always cleared.
           If the timer is started but non-repeating, stop it (as if it timed out, without
           invoking it).
           If the timer is repeating, make the "repeat" value the new timeout and start the
           timer, if necessary.

           This sounds a bit complicated, see "Be smart about timeouts", above, for a usage
           example.

       ev_tstamp ev_timer_remaining (loop, ev_timer *)
           Returns the remaining time until a timer fires. If the timer is active, then this time
           is relative to the current event loop time, otherwise it's the timeout value currently
           configured.

           That is, after an "ev_timer_set (w, 5, 7)", "ev_timer_remaining" returns 5. When the
           timer is started and one second passes, "ev_timer_remaining" will return 4. When the
           timer expires and is restarted, it will return roughly 7 (likely slightly less as
           callback invocation takes some time, too), and so on.

       ev_tstamp repeat [read-write]
           The current "repeat" value. Will be used each time the watcher times out or
           "ev_timer_again" is called, and determines the next timeout (if any), which is also
           when any modifications are taken into account.

       Examples

       Example: Create a timer that fires after 60 seconds.

          static void
          one_minute_cb (struct ev_loop *loop, ev_timer *w, int revents)
          {
            .. one minute over, w is actually stopped right here
          }

          ev_timer mytimer;
          ev_timer_init (&mytimer, one_minute_cb, 60., 0.);
          ev_timer_start (loop, &mytimer);

       Example: Create a timeout timer that times out after 10 seconds of inactivity.

          static void
          timeout_cb (struct ev_loop *loop, ev_timer *w, int revents)
          {
            .. ten seconds without any activity
          }

          ev_timer mytimer;
          ev_timer_init (&mytimer, timeout_cb, 0., 10.); /* note, only repeat used */
          ev_timer_again (&mytimer); /* start timer */
          ev_run (loop, 0);

          // and in some piece of code that gets executed on any "activity":
          // reset the timeout to start ticking again at 10 seconds
          ev_timer_again (&mytimer);

   "ev_periodic" - to cron or not to cron?
       Periodic watchers are also timers of a kind, but they are very versatile (and
       unfortunately a bit complex).

       Unlike "ev_timer", periodic watchers are not based on real time (or relative time, the
       physical time that passes) but on wall clock time (absolute time, the thing you can read
       on your calender or clock). The difference is that wall clock time can run faster or
       slower than real time, and time jumps are not uncommon (e.g. when you adjust your wrist-
       watch).

       You can tell a periodic watcher to trigger after some specific point in time: for example,
       if you tell a periodic watcher to trigger "in 10 seconds" (by specifying e.g. "ev_now () +
       10.", that is, an absolute time not a delay) and then reset your system clock to January
       of the previous year, then it will take a year or more to trigger the event (unlike an
       "ev_timer", which would still trigger roughly 10 seconds after starting it, as it uses a
       relative timeout).

       "ev_periodic" watchers can also be used to implement vastly more complex timers, such as
       triggering an event on each "midnight, local time", or other complicated rules. This
       cannot be done with "ev_timer" watchers, as those cannot react to time jumps.

       As with timers, the callback is guaranteed to be invoked only when the point in time where
       it is supposed to trigger has passed. If multiple timers become ready during the same loop
       iteration then the ones with earlier time-out values are invoked before ones with later
       time-out values (but this is no longer true when a callback calls "ev_run" recursively).

       Watcher-Specific Functions and Data Members

       ev_periodic_init (ev_periodic *, callback, ev_tstamp offset, ev_tstamp interval,
       reschedule_cb)
       ev_periodic_set (ev_periodic *, ev_tstamp offset, ev_tstamp interval, reschedule_cb)
           Lots of arguments, let's sort it out... There are basically three modes of operation,
           and we will explain them from simplest to most complex:

           •   absolute timer (offset = absolute time, interval = 0, reschedule_cb = 0)

               In this configuration the watcher triggers an event after the wall clock time
               "offset" has passed. It will not repeat and will not adjust when a time jump
               occurs, that is, if it is to be run at January 1st 2011 then it will be stopped
               and invoked when the system clock reaches or surpasses this point in time.

           •   repeating interval timer (offset = offset within interval, interval > 0,
               reschedule_cb = 0)

               In this mode the watcher will always be scheduled to time out at the next "offset
               + N * interval" time (for some integer N, which can also be negative) and then
               repeat, regardless of any time jumps. The "offset" argument is merely an offset
               into the "interval" periods.

               This can be used to create timers that do not drift with respect to the system
               clock, for example, here is an "ev_periodic" that triggers each hour, on the hour
               (with respect to UTC):

                  ev_periodic_set (&periodic, 0., 3600., 0);

               This doesn't mean there will always be 3600 seconds in between triggers, but only
               that the callback will be called when the system time shows a full hour (UTC), or
               more correctly, when the system time is evenly divisible by 3600.

               Another way to think about it (for the mathematically inclined) is that
               "ev_periodic" will try to run the callback in this mode at the next possible time
               where "time = offset (mod interval)", regardless of any time jumps.

               The "interval" MUST be positive, and for numerical stability, the interval value
               should be higher than "1/8192" (which is around 100 microseconds) and "offset"
               should be higher than 0 and should have at most a similar magnitude as the current
               time (say, within a factor of ten). Typical values for offset are, in fact, 0 or
               something between 0 and "interval", which is also the recommended range.

               Note also that there is an upper limit to how often a timer can fire (CPU speed
               for example), so if "interval" is very small then timing stability will of course
               deteriorate. Libev itself tries to be exact to be about one millisecond (if the OS
               supports it and the machine is fast enough).

           •   manual reschedule mode (offset ignored, interval ignored, reschedule_cb =
               callback)

               In this mode the values for "interval" and "offset" are both being ignored.
               Instead, each time the periodic watcher gets scheduled, the reschedule callback
               will be called with the watcher as first, and the current time as second argument.

               NOTE: This callback MUST NOT stop or destroy any periodic watcher, ever, or make
               ANY other event loop modifications whatsoever, unless explicitly allowed by
               documentation here.

               If you need to stop it, return "now + 1e30" (or so, fudge fudge) and stop it
               afterwards (e.g. by starting an "ev_prepare" watcher, which is the only event loop
               modification you are allowed to do).

               The callback prototype is "ev_tstamp (*reschedule_cb)(ev_periodic *w, ev_tstamp
               now)", e.g.:

                  static ev_tstamp
                  my_rescheduler (ev_periodic *w, ev_tstamp now)
                  {
                    return now + 60.;
                  }

               It must return the next time to trigger, based on the passed time value (that is,
               the lowest time value larger than to the second argument). It will usually be
               called just before the callback will be triggered, but might be called at other
               times, too.

               NOTE: This callback must always return a time that is higher than or equal to the
               passed "now" value.

               This can be used to create very complex timers, such as a timer that triggers on
               "next midnight, local time". To do this, you would calculate the next midnight
               after "now" and return the timestamp value for this. How you do this is, again, up
               to you (but it is not trivial, which is the main reason I omitted it as an
               example).

       ev_periodic_again (loop, ev_periodic *)
           Simply stops and restarts the periodic watcher again. This is only useful when you
           changed some parameters or the reschedule callback would return a different time than
           the last time it was called (e.g. in a crond like program when the crontabs have
           changed).

       ev_tstamp ev_periodic_at (ev_periodic *)
           When active, returns the absolute time that the watcher is supposed to trigger next.
           This is not the same as the "offset" argument to "ev_periodic_set", but indeed works
           even in interval and manual rescheduling modes.

       ev_tstamp offset [read-write]
           When repeating, this contains the offset value, otherwise this is the absolute point
           in time (the "offset" value passed to "ev_periodic_set", although libev might modify
           this value for better numerical stability).

           Can be modified any time, but changes only take effect when the periodic timer fires
           or "ev_periodic_again" is being called.

       ev_tstamp interval [read-write]
           The current interval value. Can be modified any time, but changes only take effect
           when the periodic timer fires or "ev_periodic_again" is being called.

       ev_tstamp (*reschedule_cb)(ev_periodic *w, ev_tstamp now) [read-write]
           The current reschedule callback, or 0, if this functionality is switched off. Can be
           changed any time, but changes only take effect when the periodic timer fires or
           "ev_periodic_again" is being called.

       Examples

       Example: Call a callback every hour, or, more precisely, whenever the system time is
       divisible by 3600. The callback invocation times have potentially a lot of jitter, but
       good long-term stability.

          static void
          clock_cb (struct ev_loop *loop, ev_periodic *w, int revents)
          {
            ... its now a full hour (UTC, or TAI or whatever your clock follows)
          }

          ev_periodic hourly_tick;
          ev_periodic_init (&hourly_tick, clock_cb, 0., 3600., 0);
          ev_periodic_start (loop, &hourly_tick);

       Example: The same as above, but use a reschedule callback to do it:

          #include <math.h>

          static ev_tstamp
          my_scheduler_cb (ev_periodic *w, ev_tstamp now)
          {
            return now + (3600. - fmod (now, 3600.));
          }

          ev_periodic_init (&hourly_tick, clock_cb, 0., 0., my_scheduler_cb);

       Example: Call a callback every hour, starting now:

          ev_periodic hourly_tick;
          ev_periodic_init (&hourly_tick, clock_cb,
                            fmod (ev_now (loop), 3600.), 3600., 0);
          ev_periodic_start (loop, &hourly_tick);

   "ev_signal" - signal me when a signal gets signalled!
       Signal watchers will trigger an event when the process receives a specific signal one or
       more times. Even though signals are very asynchronous, libev will try its best to deliver
       signals synchronously, i.e. as part of the normal event processing, like any other event.

       If you want signals to be delivered truly asynchronously, just use "sigaction" as you
       would do without libev and forget about sharing the signal. You can even use "ev_async"
       from a signal handler to synchronously wake up an event loop.

       You can configure as many watchers as you like for the same signal, but only within the
       same loop, i.e. you can watch for "SIGINT" in your default loop and for "SIGIO" in another
       loop, but you cannot watch for "SIGINT" in both the default loop and another loop at the
       same time. At the moment, "SIGCHLD" is permanently tied to the default loop.

       When the first watcher gets started will libev actually register something with the kernel
       (thus it coexists with your own signal handlers as long as you don't register any with
       libev for the same signal).

       If possible and supported, libev will install its handlers with "SA_RESTART" (or
       equivalent) behaviour enabled, so system calls should not be unduly interrupted. If you
       have a problem with system calls getting interrupted by signals you can block all signals
       in an "ev_check" watcher and unblock them in an "ev_prepare" watcher.

       The special problem of inheritance over fork/execve/pthread_create

       Both the signal mask ("sigprocmask") and the signal disposition ("sigaction") are
       unspecified after starting a signal watcher (and after stopping it again), that is, libev
       might or might not block the signal, and might or might not set or restore the installed
       signal handler (but see "EVFLAG_NOSIGMASK").

       While this does not matter for the signal disposition (libev never sets signals to
       "SIG_IGN", so handlers will be reset to "SIG_DFL" on "execve"), this matters for the
       signal mask: many programs do not expect certain signals to be blocked.

       This means that before calling "exec" (from the child) you should reset the signal mask to
       whatever "default" you expect (all clear is a good choice usually).

       The simplest way to ensure that the signal mask is reset in the child is to install a fork
       handler with "pthread_atfork" that resets it. That will catch fork calls done by libraries
       (such as the libc) as well.

       In current versions of libev, the signal will not be blocked indefinitely unless you use
       the "signalfd" API ("EV_SIGNALFD"). While this reduces the window of opportunity for
       problems, it will not go away, as libev has to modify the signal mask, at least
       temporarily.

       So I can't stress this enough: If you do not reset your signal mask when you expect it to
       be empty, you have a race condition in your code. This is not a libev-specific thing, this
       is true for most event libraries.

       The special problem of threads signal handling

       POSIX threads has problematic signal handling semantics, specifically, a lot of
       functionality (sigfd, sigwait etc.) only really works if all threads in a process block
       signals, which is hard to achieve.

       When you want to use sigwait (or mix libev signal handling with your own for the same
       signals), you can tackle this problem by globally blocking all signals before creating any
       threads (or creating them with a fully set sigprocmask) and also specifying the
       "EVFLAG_NOSIGMASK" when creating loops. Then designate one thread as "signal receiver
       thread" which handles these signals. You can pass on any signals that libev might be
       interested in by calling "ev_feed_signal".

       Watcher-Specific Functions and Data Members

       ev_signal_init (ev_signal *, callback, int signum)
       ev_signal_set (ev_signal *, int signum)
           Configures the watcher to trigger on the given signal number (usually one of the
           "SIGxxx" constants).

       int signum [read-only]
           The signal the watcher watches out for.

       Examples

       Example: Try to exit cleanly on SIGINT.

          static void
          sigint_cb (struct ev_loop *loop, ev_signal *w, int revents)
          {
            ev_break (loop, EVBREAK_ALL);
          }

          ev_signal signal_watcher;
          ev_signal_init (&signal_watcher, sigint_cb, SIGINT);
          ev_signal_start (loop, &signal_watcher);

   "ev_child" - watch out for process status changes
       Child watchers trigger when your process receives a SIGCHLD in response to some child
       status changes (most typically when a child of yours dies or exits). It is permissible to
       install a child watcher after the child has been forked (which implies it might have
       already exited), as long as the event loop isn't entered (or is continued from a watcher),
       i.e., forking and then immediately registering a watcher for the child is fine, but
       forking and registering a watcher a few event loop iterations later or in the next
       callback invocation is not.

       Only the default event loop is capable of handling signals, and therefore you can only
       register child watchers in the default event loop.

       Due to some design glitches inside libev, child watchers will always be handled at maximum
       priority (their priority is set to "EV_MAXPRI" by libev)

       Process Interaction

       Libev grabs "SIGCHLD" as soon as the default event loop is initialised. This is necessary
       to guarantee proper behaviour even if the first child watcher is started after the child
       exits. The occurrence of "SIGCHLD" is recorded asynchronously, but child reaping is done
       synchronously as part of the event loop processing. Libev always reaps all children, even
       ones not watched.

       Overriding the Built-In Processing

       Libev offers no special support for overriding the built-in child processing, but if your
       application collides with libev's default child handler, you can override it easily by
       installing your own handler for "SIGCHLD" after initialising the default loop, and making
       sure the default loop never gets destroyed. You are encouraged, however, to use an event-
       based approach to child reaping and thus use libev's support for that, so other libev
       users can use "ev_child" watchers freely.

       Stopping the Child Watcher

       Currently, the child watcher never gets stopped, even when the child terminates, so
       normally one needs to stop the watcher in the callback. Future versions of libev might
       stop the watcher automatically when a child exit is detected (calling "ev_child_stop"
       twice is not a problem).

       Watcher-Specific Functions and Data Members

       ev_child_init (ev_child *, callback, int pid, int trace)
       ev_child_set (ev_child *, int pid, int trace)
           Configures the watcher to wait for status changes of process "pid" (or any process if
           "pid" is specified as 0). The callback can look at the "rstatus" member of the
           "ev_child" watcher structure to see the status word (use the macros from "sys/wait.h"
           and see your systems "waitpid" documentation). The "rpid" member contains the pid of
           the process causing the status change. "trace" must be either 0 (only activate the
           watcher when the process terminates) or 1 (additionally activate the watcher when the
           process is stopped or continued).

       int pid [read-only]
           The process id this watcher watches out for, or 0, meaning any process id.

       int rpid [read-write]
           The process id that detected a status change.

       int rstatus [read-write]
           The process exit/trace status caused by "rpid" (see your systems "waitpid" and
           "sys/wait.h" documentation for details).

       Examples

       Example: "fork()" a new process and install a child handler to wait for its completion.

          ev_child cw;

          static void
          child_cb (EV_P_ ev_child *w, int revents)
          {
            ev_child_stop (EV_A_ w);
            printf ("process %d exited with status %x\n", w->rpid, w->rstatus);
          }

          pid_t pid = fork ();

          if (pid < 0)
            // error
          else if (pid == 0)
            {
              // the forked child executes here
              exit (1);
            }
          else
            {
              ev_child_init (&cw, child_cb, pid, 0);
              ev_child_start (EV_DEFAULT_ &cw);
            }

   "ev_stat" - did the file attributes just change?
       This watches a file system path for attribute changes. That is, it calls "stat" on that
       path in regular intervals (or when the OS says it changed) and sees if it changed compared
       to the last time, invoking the callback if it did. Starting the watcher "stat"'s the file,
       so only changes that happen after the watcher has been started will be reported.

       The path does not need to exist: changing from "path exists" to "path does not exist" is a
       status change like any other. The condition "path does not exist" (or more correctly "path
       cannot be stat'ed") is signified by the "st_nlink" field being zero (which is otherwise
       always forced to be at least one) and all the other fields of the stat buffer having
       unspecified contents.

       The path must not end in a slash or contain special components such as "." or "..". The
       path should be absolute: If it is relative and your working directory changes, then the
       behaviour is undefined.

       Since there is no portable change notification interface available, the portable
       implementation simply calls stat(2) regularly on the path to see if it changed somehow.
       You can specify a recommended polling interval for this case. If you specify a polling
       interval of 0 (highly recommended!) then a suitable, unspecified default value will be
       used (which you can expect to be around five seconds, although this might change
       dynamically). Libev will also impose a minimum interval which is currently around 0.1, but
       that's usually overkill.

       This watcher type is not meant for massive numbers of stat watchers, as even with OS-
       supported change notifications, this can be resource-intensive.

       At the time of this writing, the only OS-specific interface implemented is the Linux
       inotify interface (implementing kqueue support is left as an exercise for the reader.
       Note, however, that the author sees no way of implementing "ev_stat" semantics with
       kqueue, except as a hint).

       ABI Issues (Largefile Support)

       Libev by default (unless the user overrides this) uses the default compilation
       environment, which means that on systems with large file support disabled by default, you
       get the 32 bit version of the stat structure. When using the library from programs that
       change the ABI to use 64 bit file offsets the programs will fail. In that case you have to
       compile libev with the same flags to get binary compatibility. This is obviously the case
       with any flags that change the ABI, but the problem is most noticeably displayed with
       ev_stat and large file support.

       The solution for this is to lobby your distribution maker to make large file interfaces
       available by default (as e.g. FreeBSD does) and not optional. Libev cannot simply switch
       on large file support because it has to exchange stat structures with application programs
       compiled using the default compilation environment.

       Inotify and Kqueue

       When "inotify (7)" support has been compiled into libev and present at runtime, it will be
       used to speed up change detection where possible. The inotify descriptor will be created
       lazily when the first "ev_stat" watcher is being started.

       Inotify presence does not change the semantics of "ev_stat" watchers except that changes
       might be detected earlier, and in some cases, to avoid making regular "stat" calls. Even
       in the presence of inotify support there are many cases where libev has to resort to
       regular "stat" polling, but as long as kernel 2.6.25 or newer is used (2.6.24 and older
       have too many bugs), the path exists (i.e. stat succeeds), and the path resides on a local
       filesystem (libev currently assumes only ext2/3, jfs, reiserfs and xfs are fully working)
       libev usually gets away without polling.

       There is no support for kqueue, as apparently it cannot be used to implement this
       functionality, due to the requirement of having a file descriptor open on the object at
       all times, and detecting renames, unlinks etc. is difficult.

       "stat ()" is a synchronous operation

       Libev doesn't normally do any kind of I/O itself, and so is not blocking the process. The
       exception are "ev_stat" watchers - those call "stat ()", which is a synchronous operation.

       For local paths, this usually doesn't matter: unless the system is very busy or the
       intervals between stat's are large, a stat call will be fast, as the path data is usually
       in memory already (except when starting the watcher).

       For networked file systems, calling "stat ()" can block an indefinite time due to network
       issues, and even under good conditions, a stat call often takes multiple milliseconds.

       Therefore, it is best to avoid using "ev_stat" watchers on networked paths, although this
       is fully supported by libev.

       The special problem of stat time resolution

       The "stat ()" system call only supports full-second resolution portably, and even on
       systems where the resolution is higher, most file systems still only support whole
       seconds.

       That means that, if the time is the only thing that changes, you can easily miss updates:
       on the first update, "ev_stat" detects a change and calls your callback, which does
       something. When there is another update within the same second, "ev_stat" will be unable
       to detect unless the stat data does change in other ways (e.g. file size).

       The solution to this is to delay acting on a change for slightly more than a second (or
       till slightly after the next full second boundary), using a roughly one-second-delay
       "ev_timer" (e.g. "ev_timer_set (w, 0., 1.02); ev_timer_again (loop, w)").

       The .02 offset is added to work around small timing inconsistencies of some operating
       systems (where the second counter of the current time might be be delayed. One such system
       is the Linux kernel, where a call to "gettimeofday" might return a timestamp with a full
       second later than a subsequent "time" call - if the equivalent of "time ()" is used to
       update file times then there will be a small window where the kernel uses the previous
       second to update file times but libev might already execute the timer callback).

       Watcher-Specific Functions and Data Members

       ev_stat_init (ev_stat *, callback, const char *path, ev_tstamp interval)
       ev_stat_set (ev_stat *, const char *path, ev_tstamp interval)
           Configures the watcher to wait for status changes of the given "path". The "interval"
           is a hint on how quickly a change is expected to be detected and should normally be
           specified as 0 to let libev choose a suitable value. The memory pointed to by "path"
           must point to the same path for as long as the watcher is active.

           The callback will receive an "EV_STAT" event when a change was detected, relative to
           the attributes at the time the watcher was started (or the last change was detected).

       ev_stat_stat (loop, ev_stat *)
           Updates the stat buffer immediately with new values. If you change the watched path in
           your callback, you could call this function to avoid detecting this change (while
           introducing a race condition if you are not the only one changing the path). Can also
           be useful simply to find out the new values.

       ev_statdata attr [read-only]
           The most-recently detected attributes of the file. Although the type is "ev_statdata",
           this is usually the (or one of the) "struct stat" types suitable for your system, but
           you can only rely on the POSIX-standardised members to be present. If the "st_nlink"
           member is 0, then there was some error while "stat"ing the file.

       ev_statdata prev [read-only]
           The previous attributes of the file. The callback gets invoked whenever "prev" !=
           "attr", or, more precisely, one or more of these members differ: "st_dev", "st_ino",
           "st_mode", "st_nlink", "st_uid", "st_gid", "st_rdev", "st_size", "st_atime",
           "st_mtime", "st_ctime".

       ev_tstamp interval [read-only]
           The specified interval.

       const char *path [read-only]
           The file system path that is being watched.

       Examples

       Example: Watch "/etc/passwd" for attribute changes.

          static void
          passwd_cb (struct ev_loop *loop, ev_stat *w, int revents)
          {
            /* /etc/passwd changed in some way */
            if (w->attr.st_nlink)
              {
                printf ("passwd current size  %ld\n", (long)w->attr.st_size);
                printf ("passwd current atime %ld\n", (long)w->attr.st_mtime);
                printf ("passwd current mtime %ld\n", (long)w->attr.st_mtime);
              }
            else
              /* you shalt not abuse printf for puts */
              puts ("wow, /etc/passwd is not there, expect problems. "
                    "if this is windows, they already arrived\n");
          }

          ...
          ev_stat passwd;

          ev_stat_init (&passwd, passwd_cb, "/etc/passwd", 0.);
          ev_stat_start (loop, &passwd);

       Example: Like above, but additionally use a one-second delay so we do not miss updates
       (however, frequent updates will delay processing, too, so one might do the work both on
       "ev_stat" callback invocation and on "ev_timer" callback invocation).

          static ev_stat passwd;
          static ev_timer timer;

          static void
          timer_cb (EV_P_ ev_timer *w, int revents)
          {
            ev_timer_stop (EV_A_ w);

            /* now it's one second after the most recent passwd change */
          }

          static void
          stat_cb (EV_P_ ev_stat *w, int revents)
          {
            /* reset the one-second timer */
            ev_timer_again (EV_A_ &timer);
          }

          ...
          ev_stat_init (&passwd, stat_cb, "/etc/passwd", 0.);
          ev_stat_start (loop, &passwd);
          ev_timer_init (&timer, timer_cb, 0., 1.02);

   "ev_idle" - when you've got nothing better to do...
       Idle watchers trigger events when no other events of the same or higher priority are
       pending (prepare, check and other idle watchers do not count as receiving "events").

       That is, as long as your process is busy handling sockets or timeouts (or even signals,
       imagine) of the same or higher priority it will not be triggered. But when your process is
       idle (or only lower-priority watchers are pending), the idle watchers are being called
       once per event loop iteration - until stopped, that is, or your process receives more
       events and becomes busy again with higher priority stuff.

       The most noteworthy effect is that as long as any idle watchers are active, the process
       will not block when waiting for new events.

       Apart from keeping your process non-blocking (which is a useful effect on its own
       sometimes), idle watchers are a good place to do "pseudo-background processing", or delay
       processing stuff to after the event loop has handled all outstanding events.

       Abusing an "ev_idle" watcher for its side-effect

       As long as there is at least one active idle watcher, libev will never sleep
       unnecessarily. Or in other words, it will loop as fast as possible.  For this to work, the
       idle watcher doesn't need to be invoked at all - the lowest priority will do.

       This mode of operation can be useful together with an "ev_check" watcher, to do something
       on each event loop iteration - for example to balance load between different connections.

       See "Abusing an ev_check watcher for its side-effect" for a longer example.

       Watcher-Specific Functions and Data Members

       ev_idle_init (ev_idle *, callback)
           Initialises and configures the idle watcher - it has no parameters of any kind. There
           is a "ev_idle_set" macro, but using it is utterly pointless, believe me.

       Examples

       Example: Dynamically allocate an "ev_idle" watcher, start it, and in the callback, free
       it. Also, use no error checking, as usual.

          static void
          idle_cb (struct ev_loop *loop, ev_idle *w, int revents)
          {
            // stop the watcher
            ev_idle_stop (loop, w);

            // now we can free it
            free (w);

            // now do something you wanted to do when the program has
            // no longer anything immediate to do.
          }

          ev_idle *idle_watcher = malloc (sizeof (ev_idle));
          ev_idle_init (idle_watcher, idle_cb);
          ev_idle_start (loop, idle_watcher);

   "ev_prepare" and "ev_check" - customise your event loop!
       Prepare and check watchers are often (but not always) used in pairs: prepare watchers get
       invoked before the process blocks and check watchers afterwards.

       You must not call "ev_run" or similar functions that enter the current event loop from
       either "ev_prepare" or "ev_check" watchers. Other loops than the current one are fine,
       however. The rationale behind this is that you do not need to check for recursion in those
       watchers, i.e. the sequence will always be "ev_prepare", blocking, "ev_check" so if you
       have one watcher of each kind they will always be called in pairs bracketing the blocking
       call.

       Their main purpose is to integrate other event mechanisms into libev and their use is
       somewhat advanced. They could be used, for example, to track variable changes, implement
       your own watchers, integrate net-snmp or a coroutine library and lots more. They are also
       occasionally useful if you cache some data and want to flush it before blocking (for
       example, in X programs you might want to do an "XFlush ()" in an "ev_prepare" watcher).

       This is done by examining in each prepare call which file descriptors need to be watched
       by the other library, registering "ev_io" watchers for them and starting an "ev_timer"
       watcher for any timeouts (many libraries provide exactly this functionality). Then, in the
       check watcher, you check for any events that occurred (by checking the pending status of
       all watchers and stopping them) and call back into the library. The I/O and timer
       callbacks will never actually be called (but must be valid nevertheless, because you never
       know, you know?).

       As another example, the Perl Coro module uses these hooks to integrate coroutines into
       libev programs, by yielding to other active coroutines during each prepare and only
       letting the process block if no coroutines are ready to run (it's actually more
       complicated: it only runs coroutines with priority higher than or equal to the event loop
       and one coroutine of lower priority, but only once, using idle watchers to keep the event
       loop from blocking if lower-priority coroutines are active, thus mapping low-priority
       coroutines to idle/background tasks).

       When used for this purpose, it is recommended to give "ev_check" watchers highest
       ("EV_MAXPRI") priority, to ensure that they are being run before any other watchers after
       the poll (this doesn't matter for "ev_prepare" watchers).

       Also, "ev_check" watchers (and "ev_prepare" watchers, too) should not activate ("feed")
       events into libev. While libev fully supports this, they might get executed before other
       "ev_check" watchers did their job. As "ev_check" watchers are often used to embed other
       (non-libev) event loops those other event loops might be in an unusable state until their
       "ev_check" watcher ran (always remind yourself to coexist peacefully with others).

       Abusing an "ev_check" watcher for its side-effect

       "ev_check" (and less often also "ev_prepare") watchers can also be useful because they are
       called once per event loop iteration. For example, if you want to handle a large number of
       connections fairly, you normally only do a bit of work for each active connection, and if
       there is more work to do, you wait for the next event loop iteration, so other connections
       have a chance of making progress.

       Using an "ev_check" watcher is almost enough: it will be called on the next event loop
       iteration. However, that isn't as soon as possible - without external events, your
       "ev_check" watcher will not be invoked.

       This is where "ev_idle" watchers come in handy - all you need is a single global idle
       watcher that is active as long as you have one active "ev_check" watcher. The "ev_idle"
       watcher makes sure the event loop will not sleep, and the "ev_check" watcher makes sure a
       callback gets invoked. Neither watcher alone can do that.

       Watcher-Specific Functions and Data Members

       ev_prepare_init (ev_prepare *, callback)
       ev_check_init (ev_check *, callback)
           Initialises and configures the prepare or check watcher - they have no parameters of
           any kind. There are "ev_prepare_set" and "ev_check_set" macros, but using them is
           utterly, utterly, utterly and completely pointless.

       Examples

       There are a number of principal ways to embed other event loops or modules into libev.
       Here are some ideas on how to include libadns into libev (there is a Perl module named
       "EV::ADNS" that does this, which you could use as a working example. Another Perl module
       named "EV::Glib" embeds a Glib main context into libev, and finally, "Glib::EV" embeds EV
       into the Glib event loop).

       Method 1: Add IO watchers and a timeout watcher in a prepare handler, and in a check
       watcher, destroy them and call into libadns. What follows is pseudo-code only of course.
       This requires you to either use a low priority for the check watcher or use
       "ev_clear_pending" explicitly, as the callbacks for the IO/timeout watchers might not have
       been called yet.

          static ev_io iow [nfd];
          static ev_timer tw;

          static void
          io_cb (struct ev_loop *loop, ev_io *w, int revents)
          {
          }

          // create io watchers for each fd and a timer before blocking
          static void
          adns_prepare_cb (struct ev_loop *loop, ev_prepare *w, int revents)
          {
            int timeout = 3600000;
            struct pollfd fds [nfd];
            // actual code will need to loop here and realloc etc.
            adns_beforepoll (ads, fds, &nfd, &timeout, timeval_from (ev_time ()));

            /* the callback is illegal, but won't be called as we stop during check */
            ev_timer_init (&tw, 0, timeout * 1e-3, 0.);
            ev_timer_start (loop, &tw);

            // create one ev_io per pollfd
            for (int i = 0; i < nfd; ++i)
              {
                ev_io_init (iow + i, io_cb, fds [i].fd,
                  ((fds [i].events & POLLIN ? EV_READ : 0)
                   | (fds [i].events & POLLOUT ? EV_WRITE : 0)));

                fds [i].revents = 0;
                ev_io_start (loop, iow + i);
              }
          }

          // stop all watchers after blocking
          static void
          adns_check_cb (struct ev_loop *loop, ev_check *w, int revents)
          {
            ev_timer_stop (loop, &tw);

            for (int i = 0; i < nfd; ++i)
              {
                // set the relevant poll flags
                // could also call adns_processreadable etc. here
                struct pollfd *fd = fds + i;
                int revents = ev_clear_pending (iow + i);
                if (revents & EV_READ ) fd->revents |= fd->events & POLLIN;
                if (revents & EV_WRITE) fd->revents |= fd->events & POLLOUT;

                // now stop the watcher
                ev_io_stop (loop, iow + i);
              }

            adns_afterpoll (adns, fds, nfd, timeval_from (ev_now (loop));
          }

       Method 2: This would be just like method 1, but you run "adns_afterpoll" in the prepare
       watcher and would dispose of the check watcher.

       Method 3: If the module to be embedded supports explicit event notification (libadns
       does), you can also make use of the actual watcher callbacks, and only destroy/create the
       watchers in the prepare watcher.

          static void
          timer_cb (EV_P_ ev_timer *w, int revents)
          {
            adns_state ads = (adns_state)w->data;
            update_now (EV_A);

            adns_processtimeouts (ads, &tv_now);
          }

          static void
          io_cb (EV_P_ ev_io *w, int revents)
          {
            adns_state ads = (adns_state)w->data;
            update_now (EV_A);

            if (revents & EV_READ ) adns_processreadable  (ads, w->fd, &tv_now);
            if (revents & EV_WRITE) adns_processwriteable (ads, w->fd, &tv_now);
          }

          // do not ever call adns_afterpoll

       Method 4: Do not use a prepare or check watcher because the module you want to embed is
       not flexible enough to support it. Instead, you can override their poll function. The
       drawback with this solution is that the main loop is now no longer controllable by EV. The
       "Glib::EV" module uses this approach, effectively embedding EV as a client into the
       horrible libglib event loop.

          static gint
          event_poll_func (GPollFD *fds, guint nfds, gint timeout)
          {
            int got_events = 0;

            for (n = 0; n < nfds; ++n)
              // create/start io watcher that sets the relevant bits in fds[n] and increment got_events

            if (timeout >= 0)
              // create/start timer

            // poll
            ev_run (EV_A_ 0);

            // stop timer again
            if (timeout >= 0)
              ev_timer_stop (EV_A_ &to);

            // stop io watchers again - their callbacks should have set
            for (n = 0; n < nfds; ++n)
              ev_io_stop (EV_A_ iow [n]);

            return got_events;
          }

   "ev_embed" - when one backend isn't enough...
       This is a rather advanced watcher type that lets you embed one event loop into another
       (currently only "ev_io" events are supported in the embedded loop, other types of watchers
       might be handled in a delayed or incorrect fashion and must not be used).

       There are primarily two reasons you would want that: work around bugs and prioritise I/O.

       As an example for a bug workaround, the kqueue backend might only support sockets on some
       platform, so it is unusable as generic backend, but you still want to make use of it
       because you have many sockets and it scales so nicely. In this case, you would create a
       kqueue-based loop and embed it into your default loop (which might use e.g. poll). Overall
       operation will be a bit slower because first libev has to call "poll" and then "kevent",
       but at least you can use both mechanisms for what they are best: "kqueue" for scalable
       sockets and "poll" if you want it to work :)

       As for prioritising I/O: under rare circumstances you have the case where some fds have to
       be watched and handled very quickly (with low latency), and even priorities and idle
       watchers might have too much overhead. In this case you would put all the high priority
       stuff in one loop and all the rest in a second one, and embed the second one in the first.

       As long as the watcher is active, the callback will be invoked every time there might be
       events pending in the embedded loop. The callback must then call "ev_embed_sweep
       (mainloop, watcher)" to make a single sweep and invoke their callbacks (the callback
       doesn't need to invoke the "ev_embed_sweep" function directly, it could also start an idle
       watcher to give the embedded loop strictly lower priority for example).

       You can also set the callback to 0, in which case the embed watcher will automatically
       execute the embedded loop sweep whenever necessary.

       Fork detection will be handled transparently while the "ev_embed" watcher is active, i.e.,
       the embedded loop will automatically be forked when the embedding loop forks. In other
       cases, the user is responsible for calling "ev_loop_fork" on the embedded loop.

       Unfortunately, not all backends are embeddable: only the ones returned by
       "ev_embeddable_backends" are, which, unfortunately, does not include any portable one.

       So when you want to use this feature you will always have to be prepared that you cannot
       get an embeddable loop. The recommended way to get around this is to have a separate
       variables for your embeddable loop, try to create it, and if that fails, use the normal
       loop for everything.

       "ev_embed" and fork

       While the "ev_embed" watcher is running, forks in the embedding loop will automatically be
       applied to the embedded loop as well, so no special fork handling is required in that
       case. When the watcher is not running, however, it is still the task of the libev user to
       call "ev_loop_fork ()" as applicable.

       Watcher-Specific Functions and Data Members

       ev_embed_init (ev_embed *, callback, struct ev_loop *embedded_loop)
       ev_embed_set (ev_embed *, struct ev_loop *embedded_loop)
           Configures the watcher to embed the given loop, which must be embeddable. If the
           callback is 0, then "ev_embed_sweep" will be invoked automatically, otherwise it is
           the responsibility of the callback to invoke it (it will continue to be called until
           the sweep has been done, if you do not want that, you need to temporarily stop the
           embed watcher).

       ev_embed_sweep (loop, ev_embed *)
           Make a single, non-blocking sweep over the embedded loop. This works similarly to
           "ev_run (embedded_loop, EVRUN_NOWAIT)", but in the most appropriate way for embedded
           loops.

       struct ev_loop *other [read-only]
           The embedded event loop.

       Examples

       Example: Try to get an embeddable event loop and embed it into the default event loop. If
       that is not possible, use the default loop. The default loop is stored in "loop_hi", while
       the embeddable loop is stored in "loop_lo" (which is "loop_hi" in the case no embeddable
       loop can be used).

          struct ev_loop *loop_hi = ev_default_init (0);
          struct ev_loop *loop_lo = 0;
          ev_embed embed;

          // see if there is a chance of getting one that works
          // (remember that a flags value of 0 means autodetection)
          loop_lo = ev_embeddable_backends () & ev_recommended_backends ()
            ? ev_loop_new (ev_embeddable_backends () & ev_recommended_backends ())
            : 0;

          // if we got one, then embed it, otherwise default to loop_hi
          if (loop_lo)
            {
              ev_embed_init (&embed, 0, loop_lo);
              ev_embed_start (loop_hi, &embed);
            }
          else
            loop_lo = loop_hi;

       Example: Check if kqueue is available but not recommended and create a kqueue backend for
       use with sockets (which usually work with any kqueue implementation). Store the
       kqueue/socket-only event loop in "loop_socket". (One might optionally use "EVFLAG_NOENV",
       too).

          struct ev_loop *loop = ev_default_init (0);
          struct ev_loop *loop_socket = 0;
          ev_embed embed;

          if (ev_supported_backends () & ~ev_recommended_backends () & EVBACKEND_KQUEUE)
            if ((loop_socket = ev_loop_new (EVBACKEND_KQUEUE))
              {
                ev_embed_init (&embed, 0, loop_socket);
                ev_embed_start (loop, &embed);
              }

          if (!loop_socket)
            loop_socket = loop;

          // now use loop_socket for all sockets, and loop for everything else

   "ev_fork" - the audacity to resume the event loop after a fork
       Fork watchers are called when a "fork ()" was detected (usually because whoever is a good
       citizen cared to tell libev about it by calling "ev_loop_fork"). The invocation is done
       before the event loop blocks next and before "ev_check" watchers are being called, and
       only in the child after the fork. If whoever good citizen calling "ev_default_fork" cheats
       and calls it in the wrong process, the fork handlers will be invoked, too, of course.

       The special problem of life after fork - how is it possible?

       Most uses of "fork()" consist of forking, then some simple calls to set up/change the
       process environment, followed by a call to "exec()". This sequence should be handled by
       libev without any problems.

       This changes when the application actually wants to do event handling in the child, or
       both parent in child, in effect "continuing" after the fork.

       The default mode of operation (for libev, with application help to detect forks) is to
       duplicate all the state in the child, as would be expected when either the parent or the
       child process continues.

       When both processes want to continue using libev, then this is usually the wrong result.
       In that case, usually one process (typically the parent) is supposed to continue with all
       watchers in place as before, while the other process typically wants to start fresh, i.e.
       without any active watchers.

       The cleanest and most efficient way to achieve that with libev is to simply create a new
       event loop, which of course will be "empty", and use that for new watchers. This has the
       advantage of not touching more memory than necessary, and thus avoiding the copy-on-write,
       and the disadvantage of having to use multiple event loops (which do not support signal
       watchers).

       When this is not possible, or you want to use the default loop for other reasons, then in
       the process that wants to start "fresh", call "ev_loop_destroy (EV_DEFAULT)" followed by
       "ev_default_loop (...)".  Destroying the default loop will "orphan" (not stop) all
       registered watchers, so you have to be careful not to execute code that modifies those
       watchers. Note also that in that case, you have to re-register any signal watchers.

       Watcher-Specific Functions and Data Members

       ev_fork_init (ev_fork *, callback)
           Initialises and configures the fork watcher - it has no parameters of any kind. There
           is a "ev_fork_set" macro, but using it is utterly pointless, really.

   "ev_cleanup" - even the best things end
       Cleanup watchers are called just before the event loop is being destroyed by a call to
       "ev_loop_destroy".

       While there is no guarantee that the event loop gets destroyed, cleanup watchers provide a
       convenient method to install cleanup hooks for your program, worker threads and so on -
       you just to make sure to destroy the loop when you want them to be invoked.

       Cleanup watchers are invoked in the same way as any other watcher. Unlike all other
       watchers, they do not keep a reference to the event loop (which makes a lot of sense if
       you think about it). Like all other watchers, you can call libev functions in the
       callback, except "ev_cleanup_start".

       Watcher-Specific Functions and Data Members

       ev_cleanup_init (ev_cleanup *, callback)
           Initialises and configures the cleanup watcher - it has no parameters of any kind.
           There is a "ev_cleanup_set" macro, but using it is utterly pointless, I assure you.

       Example: Register an atexit handler to destroy the default loop, so any cleanup functions
       are called.

          static void
          program_exits (void)
          {
            ev_loop_destroy (EV_DEFAULT_UC);
          }

          ...
          atexit (program_exits);

   "ev_async" - how to wake up an event loop
       In general, you cannot use an "ev_loop" from multiple threads or other asynchronous
       sources such as signal handlers (as opposed to multiple event loops - those are of course
       safe to use in different threads).

       Sometimes, however, you need to wake up an event loop you do not control, for example
       because it belongs to another thread. This is what "ev_async" watchers do: as long as the
       "ev_async" watcher is active, you can signal it by calling "ev_async_send", which is
       thread- and signal safe.

       This functionality is very similar to "ev_signal" watchers, as signals, too, are
       asynchronous in nature, and signals, too, will be compressed (i.e. the number of callback
       invocations may be less than the number of "ev_async_send" calls). In fact, you could use
       signal watchers as a kind of "global async watchers" by using a watcher on an otherwise
       unused signal, and "ev_feed_signal" to signal this watcher from another thread, even
       without knowing which loop owns the signal.

       Queueing

       "ev_async" does not support queueing of data in any way. The reason is that the author
       does not know of a simple (or any) algorithm for a multiple-writer-single-reader queue
       that works in all cases and doesn't need elaborate support such as pthreads or unportable
       memory access semantics.

       That means that if you want to queue data, you have to provide your own queue. But at
       least I can tell you how to implement locking around your queue:

       queueing from a signal handler context
           To implement race-free queueing, you simply add to the queue in the signal handler but
           you block the signal handler in the watcher callback. Here is an example that does
           that for some fictitious SIGUSR1 handler:

              static ev_async mysig;

              static void
              sigusr1_handler (void)
              {
                sometype data;

                // no locking etc.
                queue_put (data);
                ev_async_send (EV_DEFAULT_ &mysig);
              }

              static void
              mysig_cb (EV_P_ ev_async *w, int revents)
              {
                sometype data;
                sigset_t block, prev;

                sigemptyset (&block);
                sigaddset (&block, SIGUSR1);
                sigprocmask (SIG_BLOCK, &block, &prev);

                while (queue_get (&data))
                  process (data);

                if (sigismember (&prev, SIGUSR1)
                  sigprocmask (SIG_UNBLOCK, &block, 0);
              }

           (Note: pthreads in theory requires you to use "pthread_setmask" instead of
           "sigprocmask" when you use threads, but libev doesn't do it either...).

       queueing from a thread context
           The strategy for threads is different, as you cannot (easily) block threads but you
           can easily preempt them, so to queue safely you need to employ a traditional mutex
           lock, such as in this pthread example:

              static ev_async mysig;
              static pthread_mutex_t mymutex = PTHREAD_MUTEX_INITIALIZER;

              static void
              otherthread (void)
              {
                // only need to lock the actual queueing operation
                pthread_mutex_lock (&mymutex);
                queue_put (data);
                pthread_mutex_unlock (&mymutex);

                ev_async_send (EV_DEFAULT_ &mysig);
              }

              static void
              mysig_cb (EV_P_ ev_async *w, int revents)
              {
                pthread_mutex_lock (&mymutex);

                while (queue_get (&data))
                  process (data);

                pthread_mutex_unlock (&mymutex);
              }

       Watcher-Specific Functions and Data Members

       ev_async_init (ev_async *, callback)
           Initialises and configures the async watcher - it has no parameters of any kind. There
           is a "ev_async_set" macro, but using it is utterly pointless, trust me.

       ev_async_send (loop, ev_async *)
           Sends/signals/activates the given "ev_async" watcher, that is, feeds an "EV_ASYNC"
           event on the watcher into the event loop, and instantly returns.

           Unlike "ev_feed_event", this call is safe to do from other threads, signal or similar
           contexts (see the discussion of "EV_ATOMIC_T" in the embedding section below on what
           exactly this means).

           Note that, as with other watchers in libev, multiple events might get compressed into
           a single callback invocation (another way to look at this is that "ev_async" watchers
           are level-triggered: they are set on "ev_async_send", reset when the event loop
           detects that).

           This call incurs the overhead of at most one extra system call per event loop
           iteration, if the event loop is blocked, and no syscall at all if the event loop (or
           your program) is processing events. That means that repeated calls are basically free
           (there is no need to avoid calls for performance reasons) and that the overhead
           becomes smaller (typically zero) under load.

       bool = ev_async_pending (ev_async *)
           Returns a non-zero value when "ev_async_send" has been called on the watcher but the
           event has not yet been processed (or even noted) by the event loop.

           "ev_async_send" sets a flag in the watcher and wakes up the loop. When the loop
           iterates next and checks for the watcher to have become active, it will reset the flag
           again. "ev_async_pending" can be used to very quickly check whether invoking the loop
           might be a good idea.

           Not that this does not check whether the watcher itself is pending, only whether it
           has been requested to make this watcher pending: there is a time window between the
           event loop checking and resetting the async notification, and the callback being
           invoked.

OTHER FUNCTIONS

       There are some other functions of possible interest. Described. Here. Now.

       ev_once (loop, int fd, int events, ev_tstamp timeout, callback)
           This function combines a simple timer and an I/O watcher, calls your callback on
           whichever event happens first and automatically stops both watchers. This is useful if
           you want to wait for a single event on an fd or timeout without having to
           allocate/configure/start/stop/free one or more watchers yourself.

           If "fd" is less than 0, then no I/O watcher will be started and the "events" argument
           is being ignored. Otherwise, an "ev_io" watcher for the given "fd" and "events" set
           will be created and started.

           If "timeout" is less than 0, then no timeout watcher will be started. Otherwise an
           "ev_timer" watcher with after = "timeout" (and repeat = 0) will be started. 0 is a
           valid timeout.

           The callback has the type "void (*cb)(int revents, void *arg)" and is passed an
           "revents" set like normal event callbacks (a combination of "EV_ERROR", "EV_READ",
           "EV_WRITE" or "EV_TIMER") and the "arg" value passed to "ev_once". Note that it is
           possible to receive both a timeout and an io event at the same time - you probably
           should give io events precedence.

           Example: wait up to ten seconds for data to appear on STDIN_FILENO.

              static void stdin_ready (int revents, void *arg)
              {
                if (revents & EV_READ)
                  /* stdin might have data for us, joy! */;
                else if (revents & EV_TIMER)
                  /* doh, nothing entered */;
              }

              ev_once (STDIN_FILENO, EV_READ, 10., stdin_ready, 0);

       ev_feed_fd_event (loop, int fd, int revents)
           Feed an event on the given fd, as if a file descriptor backend detected the given
           events.

       ev_feed_signal_event (loop, int signum)
           Feed an event as if the given signal occurred. See also "ev_feed_signal", which is
           async-safe.

COMMON OR USEFUL IDIOMS (OR BOTH)

       This section explains some common idioms that are not immediately obvious. Note that
       examples are sprinkled over the whole manual, and this section only contains stuff that
       wouldn't fit anywhere else.

   ASSOCIATING CUSTOM DATA WITH A WATCHER
       Each watcher has, by default, a "void *data" member that you can read or modify at any
       time: libev will completely ignore it. This can be used to associate arbitrary data with
       your watcher. If you need more data and don't want to allocate memory separately and store
       a pointer to it in that data member, you can also "subclass" the watcher type and provide
       your own data:

          struct my_io
          {
            ev_io io;
            int otherfd;
            void *somedata;
            struct whatever *mostinteresting;
          };

          ...
          struct my_io w;
          ev_io_init (&w.io, my_cb, fd, EV_READ);

       And since your callback will be called with a pointer to the watcher, you can cast it back
       to your own type:

          static void my_cb (struct ev_loop *loop, ev_io *w_, int revents)
          {
            struct my_io *w = (struct my_io *)w_;
            ...
          }

       More interesting and less C-conformant ways of casting your callback function type instead
       have been omitted.

   BUILDING YOUR OWN COMPOSITE WATCHERS
       Another common scenario is to use some data structure with multiple embedded watchers, in
       effect creating your own watcher that combines multiple libev event sources into one
       "super-watcher":

          struct my_biggy
          {
            int some_data;
            ev_timer t1;
            ev_timer t2;
          }

       In this case getting the pointer to "my_biggy" is a bit more complicated: Either you store
       the address of your "my_biggy" struct in the "data" member of the watcher (for woozies or
       C++ coders), or you need to use some pointer arithmetic using "offsetof" inside your
       watchers (for real programmers):

          #include <stddef.h>

          static void
          t1_cb (EV_P_ ev_timer *w, int revents)
          {
            struct my_biggy big = (struct my_biggy *)
              (((char *)w) - offsetof (struct my_biggy, t1));
          }

          static void
          t2_cb (EV_P_ ev_timer *w, int revents)
          {
            struct my_biggy big = (struct my_biggy *)
              (((char *)w) - offsetof (struct my_biggy, t2));
          }

   AVOIDING FINISHING BEFORE RETURNING
       Often you have structures like this in event-based programs:

         callback ()
         {
           free (request);
         }

         request = start_new_request (..., callback);

       The intent is to start some "lengthy" operation. The "request" could be used to cancel the
       operation, or do other things with it.

       It's not uncommon to have code paths in "start_new_request" that immediately invoke the
       callback, for example, to report errors. Or you add some caching layer that finds that it
       can skip the lengthy aspects of the operation and simply invoke the callback with the
       result.

       The problem here is that this will happen before "start_new_request" has returned, so
       "request" is not set.

       Even if you pass the request by some safer means to the callback, you might want to do
       something to the request after starting it, such as canceling it, which probably isn't
       working so well when the callback has already been invoked.

       A common way around all these issues is to make sure that "start_new_request" always
       returns before the callback is invoked. If "start_new_request" immediately knows the
       result, it can artificially delay invoking the callback by using a "prepare" or "idle"
       watcher for example, or more sneakily, by reusing an existing (stopped) watcher and
       pushing it into the pending queue:

          ev_set_cb (watcher, callback);
          ev_feed_event (EV_A_ watcher, 0);

       This way, "start_new_request" can safely return before the callback is invoked, while not
       delaying callback invocation too much.

   MODEL/NESTED EVENT LOOP INVOCATIONS AND EXIT CONDITIONS
       Often (especially in GUI toolkits) there are places where you have modal interaction,
       which is most easily implemented by recursively invoking "ev_run".

       This brings the problem of exiting - a callback might want to finish the main "ev_run"
       call, but not the nested one (e.g. user clicked "Quit", but a modal "Are you sure?" dialog
       is still waiting), or just the nested one and not the main one (e.g. user clocked "Ok" in
       a modal dialog), or some other combination: In these cases, a simple "ev_break" will not
       work.

       The solution is to maintain "break this loop" variable for each "ev_run" invocation, and
       use a loop around "ev_run" until the condition is triggered, using "EVRUN_ONCE":

          // main loop
          int exit_main_loop = 0;

          while (!exit_main_loop)
            ev_run (EV_DEFAULT_ EVRUN_ONCE);

          // in a modal watcher
          int exit_nested_loop = 0;

          while (!exit_nested_loop)
            ev_run (EV_A_ EVRUN_ONCE);

       To exit from any of these loops, just set the corresponding exit variable:

          // exit modal loop
          exit_nested_loop = 1;

          // exit main program, after modal loop is finished
          exit_main_loop = 1;

          // exit both
          exit_main_loop = exit_nested_loop = 1;

   THREAD LOCKING EXAMPLE
       Here is a fictitious example of how to run an event loop in a different thread from where
       callbacks are being invoked and watchers are created/added/removed.

       For a real-world example, see the "EV::Loop::Async" perl module, which uses exactly this
       technique (which is suited for many high-level languages).

       The example uses a pthread mutex to protect the loop data, a condition variable to wait
       for callback invocations, an async watcher to notify the event loop thread and an
       unspecified mechanism to wake up the main thread.

       First, you need to associate some data with the event loop:

          typedef struct {
            mutex_t lock; /* global loop lock */
            ev_async async_w;
            thread_t tid;
            cond_t invoke_cv;
          } userdata;

          void prepare_loop (EV_P)
          {
             // for simplicity, we use a static userdata struct.
             static userdata u;

             ev_async_init (&u->async_w, async_cb);
             ev_async_start (EV_A_ &u->async_w);

             pthread_mutex_init (&u->lock, 0);
             pthread_cond_init (&u->invoke_cv, 0);

             // now associate this with the loop
             ev_set_userdata (EV_A_ u);
             ev_set_invoke_pending_cb (EV_A_ l_invoke);
             ev_set_loop_release_cb (EV_A_ l_release, l_acquire);

             // then create the thread running ev_run
             pthread_create (&u->tid, 0, l_run, EV_A);
          }

       The callback for the "ev_async" watcher does nothing: the watcher is used solely to wake
       up the event loop so it takes notice of any new watchers that might have been added:

          static void
          async_cb (EV_P_ ev_async *w, int revents)
          {
             // just used for the side effects
          }

       The "l_release" and "l_acquire" callbacks simply unlock/lock the mutex protecting the loop
       data, respectively.

          static void
          l_release (EV_P)
          {
            userdata *u = ev_userdata (EV_A);
            pthread_mutex_unlock (&u->lock);
          }

          static void
          l_acquire (EV_P)
          {
            userdata *u = ev_userdata (EV_A);
            pthread_mutex_lock (&u->lock);
          }

       The event loop thread first acquires the mutex, and then jumps straight into "ev_run":

          void *
          l_run (void *thr_arg)
          {
            struct ev_loop *loop = (struct ev_loop *)thr_arg;

            l_acquire (EV_A);
            pthread_setcanceltype (PTHREAD_CANCEL_ASYNCHRONOUS, 0);
            ev_run (EV_A_ 0);
            l_release (EV_A);

            return 0;
          }

       Instead of invoking all pending watchers, the "l_invoke" callback will signal the main
       thread via some unspecified mechanism (signals? pipe writes? "Async::Interrupt"?) and then
       waits until all pending watchers have been called (in a while loop because a) spurious
       wakeups are possible and b) skipping inter-thread-communication when there are no pending
       watchers is very beneficial):

          static void
          l_invoke (EV_P)
          {
            userdata *u = ev_userdata (EV_A);

            while (ev_pending_count (EV_A))
              {
                wake_up_other_thread_in_some_magic_or_not_so_magic_way ();
                pthread_cond_wait (&u->invoke_cv, &u->lock);
              }
          }

       Now, whenever the main thread gets told to invoke pending watchers, it will grab the lock,
       call "ev_invoke_pending" and then signal the loop thread to continue:

          static void
          real_invoke_pending (EV_P)
          {
            userdata *u = ev_userdata (EV_A);

            pthread_mutex_lock (&u->lock);
            ev_invoke_pending (EV_A);
            pthread_cond_signal (&u->invoke_cv);
            pthread_mutex_unlock (&u->lock);
          }

       Whenever you want to start/stop a watcher or do other modifications to an event loop, you
       will now have to lock:

          ev_timer timeout_watcher;
          userdata *u = ev_userdata (EV_A);

          ev_timer_init (&timeout_watcher, timeout_cb, 5.5, 0.);

          pthread_mutex_lock (&u->lock);
          ev_timer_start (EV_A_ &timeout_watcher);
          ev_async_send (EV_A_ &u->async_w);
          pthread_mutex_unlock (&u->lock);

       Note that sending the "ev_async" watcher is required because otherwise an event loop
       currently blocking in the kernel will have no knowledge about the newly added timer. By
       waking up the loop it will pick up any new watchers in the next event loop iteration.

   THREADS, COROUTINES, CONTINUATIONS, QUEUES... INSTEAD OF CALLBACKS
       While the overhead of a callback that e.g. schedules a thread is small, it is still an
       overhead. If you embed libev, and your main usage is with some kind of threads or
       coroutines, you might want to customise libev so that doesn't need callbacks anymore.

       Imagine you have coroutines that you can switch to using a function "switch_to (coro)",
       that libev runs in a coroutine called "libev_coro" and that due to some magic, the
       currently active coroutine is stored in a global called "current_coro". Then you can build
       your own "wait for libev event" primitive by changing "EV_CB_DECLARE" and "EV_CB_INVOKE"
       (note the differing ";" conventions):

          #define EV_CB_DECLARE(type)   struct my_coro *cb;
          #define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb)

       That means instead of having a C callback function, you store the coroutine to switch to
       in each watcher, and instead of having libev call your callback, you instead have it
       switch to that coroutine.

       A coroutine might now wait for an event with a function called "wait_for_event". (the
       watcher needs to be started, as always, but it doesn't matter when, or whether the watcher
       is active or not when this function is called):

          void
          wait_for_event (ev_watcher *w)
          {
            ev_set_cb (w, current_coro);
            switch_to (libev_coro);
          }

       That basically suspends the coroutine inside "wait_for_event" and continues the libev
       coroutine, which, when appropriate, switches back to this or any other coroutine.

       You can do similar tricks if you have, say, threads with an event queue - instead of
       storing a coroutine, you store the queue object and instead of switching to a coroutine,
       you push the watcher onto the queue and notify any waiters.

       To embed libev, see "EMBEDDING", but in short, it's easiest to create two files, my_ev.h
       and my_ev.c that include the respective libev files:

          // my_ev.h
          #define EV_CB_DECLARE(type)   struct my_coro *cb;
          #define EV_CB_INVOKE(watcher) switch_to ((watcher)->cb);
          #include "../libev/ev.h"

          // my_ev.c
          #define EV_H "my_ev.h"
          #include "../libev/ev.c"

       And then use my_ev.h when you would normally use ev.h, and compile my_ev.c into your
       project. When properly specifying include paths, you can even use ev.h as header file name
       directly.

LIBEVENT EMULATION

       Libev offers a compatibility emulation layer for libevent. It cannot emulate the internals
       of libevent, so here are some usage hints:

       •   Only the libevent-1.4.1-beta API is being emulated.

           This was the newest libevent version available when libev was implemented, and is
           still mostly unchanged in 2010.

       •   Use it by including <event.h>, as usual.

       •   The following members are fully supported: ev_base, ev_callback, ev_arg, ev_fd,
           ev_res, ev_events.

       •   Avoid using ev_flags and the EVLIST_*-macros, while it is maintained by libev, it does
           not work exactly the same way as in libevent (consider it a private API).

       •   Priorities are not currently supported. Initialising priorities will fail and all
           watchers will have the same priority, even though there is an ev_pri field.

       •   In libevent, the last base created gets the signals, in libev, the base that
           registered the signal gets the signals.

       •   Other members are not supported.

       •   The libev emulation is not ABI compatible to libevent, you need to use the libev
           header file and library.

C++ SUPPORT

   C API
       The normal C API should work fine when used from C++: both ev.h and the libev sources can
       be compiled as C++. Therefore, code that uses the C API will work fine.

       Proper exception specifications might have to be added to callbacks passed to libev:
       exceptions may be thrown only from watcher callbacks, all other callbacks (allocator,
       syserr, loop acquire/release and periodic reschedule callbacks) must not throw exceptions,
       and might need a "throw ()" specification. If you have code that needs to be compiled as
       both C and C++ you can use the "EV_THROW" macro for this:

          static void
          fatal_error (const char *msg) EV_THROW
          {
            perror (msg);
            abort ();
          }

          ...
          ev_set_syserr_cb (fatal_error);

       The only API functions that can currently throw exceptions are "ev_run", "ev_invoke",
       "ev_invoke_pending" and "ev_loop_destroy" (the latter because it runs cleanup watchers).

       Throwing exceptions in watcher callbacks is only supported if libev itself is compiled
       with a C++ compiler or your C and C++ environments allow throwing exceptions through C
       libraries (most do).

   C++ API
       Libev comes with some simplistic wrapper classes for C++ that mainly allow you to use some
       convenience methods to start/stop watchers and also change the callback model to a model
       using method callbacks on objects.

       To use it,

          #include <ev++.h>

       This automatically includes ev.h and puts all of its definitions (many of them macros)
       into the global namespace. All C++ specific things are put into the "ev" namespace. It
       should support all the same embedding options as ev.h, most notably "EV_MULTIPLICITY".

       Care has been taken to keep the overhead low. The only data member the C++ classes add
       (compared to plain C-style watchers) is the event loop pointer that the watcher is
       associated with (or no additional members at all if you disable "EV_MULTIPLICITY" when
       embedding libev).

       Currently, functions, static and non-static member functions and classes with "operator
       ()" can be used as callbacks. Other types should be easy to add as long as they only need
       one additional pointer for context. If you need support for other types of functors please
       contact the author (preferably after implementing it).

       For all this to work, your C++ compiler either has to use the same calling conventions as
       your C compiler (for static member functions), or you have to embed libev and compile
       libev itself as C++.

       Here is a list of things available in the "ev" namespace:

       "ev::READ", "ev::WRITE" etc.
           These are just enum values with the same values as the "EV_READ" etc.  macros from
           ev.h.

       "ev::tstamp", "ev::now"
           Aliases to the same types/functions as with the "ev_" prefix.

       "ev::io", "ev::timer", "ev::periodic", "ev::idle", "ev::sig" etc.
           For each "ev_TYPE" watcher in ev.h there is a corresponding class of the same name in
           the "ev" namespace, with the exception of "ev_signal" which is called "ev::sig" to
           avoid clashes with the "signal" macro defined by many implementations.

           All of those classes have these methods:

           ev::TYPE::TYPE ()
           ev::TYPE::TYPE (loop)
           ev::TYPE::~TYPE
               The constructor (optionally) takes an event loop to associate the watcher with. If
               it is omitted, it will use "EV_DEFAULT".

               The constructor calls "ev_init" for you, which means you have to call the "set"
               method before starting it.

               It will not set a callback, however: You have to call the templated "set" method
               to set a callback before you can start the watcher.

               (The reason why you have to use a method is a limitation in C++ which does not
               allow explicit template arguments for constructors).

               The destructor automatically stops the watcher if it is active.

           w->set<class, &class::method> (object *)
               This method sets the callback method to call. The method has to have a signature
               of "void (*)(ev_TYPE &, int)", it receives the watcher as first argument and the
               "revents" as second. The object must be given as parameter and is stored in the
               "data" member of the watcher.

               This method synthesizes efficient thunking code to call your method from the C
               callback that libev requires. If your compiler can inline your callback (i.e. it
               is visible to it at the place of the "set" call and your compiler is good :), then
               the method will be fully inlined into the thunking function, making it as fast as
               a direct C callback.

               Example: simple class declaration and watcher initialisation

                  struct myclass
                  {
                    void io_cb (ev::io &w, int revents) { }
                  }

                  myclass obj;
                  ev::io iow;
                  iow.set <myclass, &myclass::io_cb> (&obj);

           w->set (object *)
               This is a variation of a method callback - leaving out the method to call will
               default the method to "operator ()", which makes it possible to use functor
               objects without having to manually specify the "operator ()" all the time.
               Incidentally, you can then also leave out the template argument list.

               The "operator ()" method prototype must be "void operator ()(watcher &w, int
               revents)".

               See the method-"set" above for more details.

               Example: use a functor object as callback.

                  struct myfunctor
                  {
                    void operator() (ev::io &w, int revents)
                    {
                      ...
                    }
                  }

                  myfunctor f;

                  ev::io w;
                  w.set (&f);

           w->set<function> (void *data = 0)
               Also sets a callback, but uses a static method or plain function as callback. The
               optional "data" argument will be stored in the watcher's "data" member and is free
               for you to use.

               The prototype of the "function" must be "void (*)(ev::TYPE &w, int)".

               See the method-"set" above for more details.

               Example: Use a plain function as callback.

                  static void io_cb (ev::io &w, int revents) { }
                  iow.set <io_cb> ();

           w->set (loop)
               Associates a different "struct ev_loop" with this watcher. You can only do this
               when the watcher is inactive (and not pending either).

           w->set ([arguments])
               Basically the same as "ev_TYPE_set" (except for "ev::embed" watchers>), with the
               same arguments. Either this method or a suitable start method must be called at
               least once. Unlike the C counterpart, an active watcher gets automatically stopped
               and restarted when reconfiguring it with this method.

               For "ev::embed" watchers this method is called "set_embed", to avoid clashing with
               the "set (loop)" method.

           w->start ()
               Starts the watcher. Note that there is no "loop" argument, as the constructor
               already stores the event loop.

           w->start ([arguments])
               Instead of calling "set" and "start" methods separately, it is often convenient to
               wrap them in one call. Uses the same type of arguments as the configure "set"
               method of the watcher.

           w->stop ()
               Stops the watcher if it is active. Again, no "loop" argument.

           w->again () ("ev::timer", "ev::periodic" only)
               For "ev::timer" and "ev::periodic", this invokes the corresponding "ev_TYPE_again"
               function.

           w->sweep () ("ev::embed" only)
               Invokes "ev_embed_sweep".

           w->update () ("ev::stat" only)
               Invokes "ev_stat_stat".

       Example: Define a class with two I/O and idle watchers, start the I/O watchers in the
       constructor.

          class myclass
          {
            ev::io   io  ; void io_cb   (ev::io   &w, int revents);
            ev::io   io2 ; void io2_cb  (ev::io   &w, int revents);
            ev::idle idle; void idle_cb (ev::idle &w, int revents);

            myclass (int fd)
            {
              io  .set <myclass, &myclass::io_cb  > (this);
              io2 .set <myclass, &myclass::io2_cb > (this);
              idle.set <myclass, &myclass::idle_cb> (this);

              io.set (fd, ev::WRITE); // configure the watcher
              io.start ();            // start it whenever convenient

              io2.start (fd, ev::READ); // set + start in one call
            }
          };

OTHER LANGUAGE BINDINGS

       Libev does not offer other language bindings itself, but bindings for a number of
       languages exist in the form of third-party packages. If you know any interesting language
       binding in addition to the ones listed here, drop me a note.

       Perl
           The EV module implements the full libev API and is actually used to test libev. EV is
           developed together with libev. Apart from the EV core module, there are additional
           modules that implement libev-compatible interfaces to "libadns" ("EV::ADNS", but
           "AnyEvent::DNS" is preferred nowadays), "Net::SNMP" ("Net::SNMP::EV") and the
           "libglib" event core ("Glib::EV" and "EV::Glib").

           It can be found and installed via CPAN, its homepage is at
           <http://software.schmorp.de/pkg/EV>.

       Python
           Python bindings can be found at <http://code.google.com/p/pyev/>. It seems to be quite
           complete and well-documented.

       Ruby
           Tony Arcieri has written a ruby extension that offers access to a subset of the libev
           API and adds file handle abstractions, asynchronous DNS and more on top of it. It can
           be found via gem servers. Its homepage is at <http://rev.rubyforge.org/>.

           Roger Pack reports that using the link order "-lws2_32 -lmsvcrt-ruby-190" makes rev
           work even on mingw.

       Haskell
           A haskell binding to libev is available at
           http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev
           <http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hlibev>.

       D   Leandro Lucarella has written a D language binding (ev.d) for libev, to be found at
           <http://www.llucax.com.ar/proj/ev.d/index.html>.

       Ocaml
           Erkki Seppala has written Ocaml bindings for libev, to be found at
           http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/
           <http://modeemi.cs.tut.fi/~flux/software/ocaml-ev/>.

       Lua Brian Maher has written a partial interface to libev for lua (at the time of this
           writing, only "ev_io" and "ev_timer"), to be found at
           http://github.com/brimworks/lua-ev <http://github.com/brimworks/lua-ev>.

       Javascript
           Node.js (<http://nodejs.org>) uses libev as the underlying event library.

       Others
           There are others, and I stopped counting.

MACRO MAGIC

       Libev can be compiled with a variety of options, the most fundamental of which is
       "EV_MULTIPLICITY". This option determines whether (most) functions and callbacks have an
       initial "struct ev_loop *" argument.

       To make it easier to write programs that cope with either variant, the following macros
       are defined:

       "EV_A", "EV_A_"
           This provides the loop argument for functions, if one is required ("ev loop
           argument"). The "EV_A" form is used when this is the sole argument, "EV_A_" is used
           when other arguments are following. Example:

              ev_unref (EV_A);
              ev_timer_add (EV_A_ watcher);
              ev_run (EV_A_ 0);

           It assumes the variable "loop" of type "struct ev_loop *" is in scope, which is often
           provided by the following macro.

       "EV_P", "EV_P_"
           This provides the loop parameter for functions, if one is required ("ev loop
           parameter"). The "EV_P" form is used when this is the sole parameter, "EV_P_" is used
           when other parameters are following. Example:

              // this is how ev_unref is being declared
              static void ev_unref (EV_P);

              // this is how you can declare your typical callback
              static void cb (EV_P_ ev_timer *w, int revents)

           It declares a parameter "loop" of type "struct ev_loop *", quite suitable for use with
           "EV_A".

       "EV_DEFAULT", "EV_DEFAULT_"
           Similar to the other two macros, this gives you the value of the default loop, if
           multiple loops are supported ("ev loop default"). The default loop will be initialised
           if it isn't already initialised.

           For non-multiplicity builds, these macros do nothing, so you always have to initialise
           the loop somewhere.

       "EV_DEFAULT_UC", "EV_DEFAULT_UC_"
           Usage identical to "EV_DEFAULT" and "EV_DEFAULT_", but requires that the default loop
           has been initialised ("UC" == unchecked). Their behaviour is undefined when the
           default loop has not been initialised by a previous execution of "EV_DEFAULT",
           "EV_DEFAULT_" or "ev_default_init (...)".

           It is often prudent to use "EV_DEFAULT" when initialising the first watcher in a
           function but use "EV_DEFAULT_UC" afterwards.

       Example: Declare and initialise a check watcher, utilising the above macros so it will
       work regardless of whether multiple loops are supported or not.

          static void
          check_cb (EV_P_ ev_timer *w, int revents)
          {
            ev_check_stop (EV_A_ w);
          }

          ev_check check;
          ev_check_init (&check, check_cb);
          ev_check_start (EV_DEFAULT_ &check);
          ev_run (EV_DEFAULT_ 0);

EMBEDDING

       Libev can (and often is) directly embedded into host applications. Examples of
       applications that embed it include the Deliantra Game Server, the EV perl module, the GNU
       Virtual Private Ethernet (gvpe) and rxvt-unicode.

       The goal is to enable you to just copy the necessary files into your source directory
       without having to change even a single line in them, so you can easily upgrade by simply
       copying (or having a checked-out copy of libev somewhere in your source tree).

   FILESETS
       Depending on what features you need you need to include one or more sets of files in your
       application.

       CORE EVENT LOOP

       To include only the libev core (all the "ev_*" functions), with manual configuration (no
       autoconf):

          #define EV_STANDALONE 1
          #include "ev.c"

       This will automatically include ev.h, too, and should be done in a single C source file
       only to provide the function implementations. To use it, do the same for ev.h in all files
       wishing to use this API (best done by writing a wrapper around ev.h that you can include
       instead and where you can put other configuration options):

          #define EV_STANDALONE 1
          #include "ev.h"

       Both header files and implementation files can be compiled with a C++ compiler (at least,
       that's a stated goal, and breakage will be treated as a bug).

       You need the following files in your source tree, or in a directory in your include path
       (e.g. in libev/ when using -Ilibev):

          ev.h
          ev.c
          ev_vars.h
          ev_wrap.h

          ev_win32.c      required on win32 platforms only

          ev_select.c     only when select backend is enabled (which is enabled by default)
          ev_poll.c       only when poll backend is enabled (disabled by default)
          ev_epoll.c      only when the epoll backend is enabled (disabled by default)
          ev_kqueue.c     only when the kqueue backend is enabled (disabled by default)
          ev_port.c       only when the solaris port backend is enabled (disabled by default)

       ev.c includes the backend files directly when enabled, so you only need to compile this
       single file.

       LIBEVENT COMPATIBILITY API

       To include the libevent compatibility API, also include:

          #include "event.c"

       in the file including ev.c, and:

          #include "event.h"

       in the files that want to use the libevent API. This also includes ev.h.

       You need the following additional files for this:

          event.h
          event.c

       AUTOCONF SUPPORT

       Instead of using "EV_STANDALONE=1" and providing your configuration in whatever way you
       want, you can also "m4_include([libev.m4])" in your configure.ac and leave "EV_STANDALONE"
       undefined. ev.c will then include config.h and configure itself accordingly.

       For this of course you need the m4 file:

          libev.m4

   PREPROCESSOR SYMBOLS/MACROS
       Libev can be configured via a variety of preprocessor symbols you have to define before
       including (or compiling) any of its files. The default in the absence of autoconf is
       documented for every option.

       Symbols marked with "(h)" do not change the ABI, and can have different values when
       compiling libev vs. including ev.h, so it is permissible to redefine them before including
       ev.h without breaking compatibility to a compiled library. All other symbols change the
       ABI, which means all users of libev and the libev code itself must be compiled with
       compatible settings.

       EV_COMPAT3 (h)
           Backwards compatibility is a major concern for libev. This is why this release of
           libev comes with wrappers for the functions and symbols that have been renamed between
           libev version 3 and 4.

           You can disable these wrappers (to test compatibility with future versions) by
           defining "EV_COMPAT3" to 0 when compiling your sources. This has the additional
           advantage that you can drop the "struct" from "struct ev_loop" declarations, as libev
           will provide an "ev_loop" typedef in that case.

           In some future version, the default for "EV_COMPAT3" will become 0, and in some even
           more future version the compatibility code will be removed completely.

       EV_STANDALONE (h)
           Must always be 1 if you do not use autoconf configuration, which keeps libev from
           including config.h, and it also defines dummy implementations for some libevent
           functions (such as logging, which is not supported). It will also not define any of
           the structs usually found in event.h that are not directly supported by the libev core
           alone.

           In standalone mode, libev will still try to automatically deduce the configuration,
           but has to be more conservative.

       EV_USE_FLOOR
           If defined to be 1, libev will use the "floor ()" function for its periodic reschedule
           calculations, otherwise libev will fall back on a portable (slower) implementation. If
           you enable this, you usually have to link against libm or something equivalent.
           Enabling this when the "floor" function is not available will fail, so the safe
           default is to not enable this.

       EV_USE_MONOTONIC
           If defined to be 1, libev will try to detect the availability of the monotonic clock
           option at both compile time and runtime. Otherwise no use of the monotonic clock
           option will be attempted. If you enable this, you usually have to link against librt
           or something similar. Enabling it when the functionality isn't available is safe,
           though, although you have to make sure you link against any libraries where the
           "clock_gettime" function is hiding in (often -lrt). See also "EV_USE_CLOCK_SYSCALL".

       EV_USE_REALTIME
           If defined to be 1, libev will try to detect the availability of the real-time clock
           option at compile time (and assume its availability at runtime if successful).
           Otherwise no use of the real-time clock option will be attempted. This effectively
           replaces "gettimeofday" by "clock_get (CLOCK_REALTIME, ...)" and will not normally
           affect correctness. See the note about libraries in the description of
           "EV_USE_MONOTONIC", though. Defaults to the opposite value of "EV_USE_CLOCK_SYSCALL".

       EV_USE_CLOCK_SYSCALL
           If defined to be 1, libev will try to use a direct syscall instead of calling the
           system-provided "clock_gettime" function. This option exists because on GNU/Linux,
           "clock_gettime" is in "librt", but "librt" unconditionally pulls in "libpthread",
           slowing down single-threaded programs needlessly. Using a direct syscall is slightly
           slower (in theory), because no optimised vdso implementation can be used, but avoids
           the pthread dependency. Defaults to 1 on GNU/Linux with glibc 2.x or higher, as it
           simplifies linking (no need for "-lrt").

       EV_USE_NANOSLEEP
           If defined to be 1, libev will assume that "nanosleep ()" is available and will use it
           for delays. Otherwise it will use "select ()".

       EV_USE_EVENTFD
           If defined to be 1, then libev will assume that "eventfd ()" is available and will
           probe for kernel support at runtime. This will improve "ev_signal" and "ev_async"
           performance and reduce resource consumption.  If undefined, it will be enabled if the
           headers indicate GNU/Linux + Glibc 2.7 or newer, otherwise disabled.

       EV_USE_SELECT
           If undefined or defined to be 1, libev will compile in support for the "select"(2)
           backend. No attempt at auto-detection will be done: if no other method takes over,
           select will be it. Otherwise the select backend will not be compiled in.

       EV_SELECT_USE_FD_SET
           If defined to 1, then the select backend will use the system "fd_set" structure. This
           is useful if libev doesn't compile due to a missing "NFDBITS" or "fd_mask" definition
           or it mis-guesses the bitset layout on exotic systems. This usually limits the range
           of file descriptors to some low limit such as 1024 or might have other limitations
           (winsocket only allows 64 sockets). The "FD_SETSIZE" macro, set before compilation,
           configures the maximum size of the "fd_set".

       EV_SELECT_IS_WINSOCKET
           When defined to 1, the select backend will assume that select/socket/connect etc.
           don't understand file descriptors but wants osf handles on win32 (this is the case
           when the select to be used is the winsock select). This means that it will call
           "_get_osfhandle" on the fd to convert it to an OS handle. Otherwise, it is assumed
           that all these functions actually work on fds, even on win32. Should not be defined on
           non-win32 platforms.

       EV_FD_TO_WIN32_HANDLE(fd)
           If "EV_SELECT_IS_WINSOCKET" is enabled, then libev needs a way to map file descriptors
           to socket handles. When not defining this symbol (the default), then libev will call
           "_get_osfhandle", which is usually correct. In some cases, programs use their own file
           descriptor management, in which case they can provide this function to map fds to
           socket handles.

       EV_WIN32_HANDLE_TO_FD(handle)
           If "EV_SELECT_IS_WINSOCKET" then libev maps handles to file descriptors using the
           standard "_open_osfhandle" function. For programs implementing their own fd to handle
           mapping, overwriting this function makes it easier to do so. This can be done by
           defining this macro to an appropriate value.

       EV_WIN32_CLOSE_FD(fd)
           If programs implement their own fd to handle mapping on win32, then this macro can be
           used to override the "close" function, useful to unregister file descriptors again.
           Note that the replacement function has to close the underlying OS handle.

       EV_USE_WSASOCKET
           If defined to be 1, libev will use "WSASocket" to create its internal communication
           socket, which works better in some environments. Otherwise, the normal "socket"
           function will be used, which works better in other environments.

       EV_USE_POLL
           If defined to be 1, libev will compile in support for the "poll"(2) backend. Otherwise
           it will be enabled on non-win32 platforms. It takes precedence over select.

       EV_USE_EPOLL
           If defined to be 1, libev will compile in support for the Linux "epoll"(7) backend.
           Its availability will be detected at runtime, otherwise another method will be used as
           fallback. This is the preferred backend for GNU/Linux systems. If undefined, it will
           be enabled if the headers indicate GNU/Linux + Glibc 2.4 or newer, otherwise disabled.

       EV_USE_KQUEUE
           If defined to be 1, libev will compile in support for the BSD style "kqueue"(2)
           backend. Its actual availability will be detected at runtime, otherwise another method
           will be used as fallback. This is the preferred backend for BSD and BSD-like systems,
           although on most BSDs kqueue only supports some types of fds correctly (the only
           platform we found that supports ptys for example was NetBSD), so kqueue might be
           compiled in, but not be used unless explicitly requested. The best way to use it is to
           find out whether kqueue supports your type of fd properly and use an embedded kqueue
           loop.

       EV_USE_PORT
           If defined to be 1, libev will compile in support for the Solaris 10 port style
           backend. Its availability will be detected at runtime, otherwise another method will
           be used as fallback. This is the preferred backend for Solaris 10 systems.

       EV_USE_DEVPOLL
           Reserved for future expansion, works like the USE symbols above.

       EV_USE_INOTIFY
           If defined to be 1, libev will compile in support for the Linux inotify interface to
           speed up "ev_stat" watchers. Its actual availability will be detected at runtime. If
           undefined, it will be enabled if the headers indicate GNU/Linux + Glibc 2.4 or newer,
           otherwise disabled.

       EV_NO_SMP
           If defined to be 1, libev will assume that memory is always coherent between threads,
           that is, threads can be used, but threads never run on different cpus (or different
           cpu cores). This reduces dependencies and makes libev faster.

       EV_NO_THREADS
           If defined to be 1, libev will assume that it will never be called from different
           threads (that includes signal handlers), which is a stronger assumption than
           "EV_NO_SMP", above. This reduces dependencies and makes libev faster.

       EV_ATOMIC_T
           Libev requires an integer type (suitable for storing 0 or 1) whose access is atomic
           with respect to other threads or signal contexts. No such type is easily found in the
           C language, so you can provide your own type that you know is safe for your purposes.
           It is used both for signal handler "locking" as well as for signal and thread safety
           in "ev_async" watchers.

           In the absence of this define, libev will use "sig_atomic_t volatile" (from signal.h),
           which is usually good enough on most platforms.

       EV_H (h)
           The name of the ev.h header file used to include it. The default if undefined is
           "ev.h" in event.h, ev.c and ev++.h. This can be used to virtually rename the ev.h
           header file in case of conflicts.

       EV_CONFIG_H (h)
           If "EV_STANDALONE" isn't 1, this variable can be used to override ev.c's idea of where
           to find the config.h file, similarly to "EV_H", above.

       EV_EVENT_H (h)
           Similarly to "EV_H", this macro can be used to override event.c's idea of how the
           event.h header can be found, the default is "event.h".

       EV_PROTOTYPES (h)
           If defined to be 0, then ev.h will not define any function prototypes, but still
           define all the structs and other symbols. This is occasionally useful if you want to
           provide your own wrapper functions around libev functions.

       EV_MULTIPLICITY
           If undefined or defined to 1, then all event-loop-specific functions will have the
           "struct ev_loop *" as first argument, and you can create additional independent event
           loops. Otherwise there will be no support for multiple event loops and there is no
           first event loop pointer argument. Instead, all functions act on the single default
           loop.

           Note that "EV_DEFAULT" and "EV_DEFAULT_" will no longer provide a default loop when
           multiplicity is switched off - you always have to initialise the loop manually in this
           case.

       EV_MINPRI
       EV_MAXPRI
           The range of allowed priorities. "EV_MINPRI" must be smaller or equal to "EV_MAXPRI",
           but otherwise there are no non-obvious limitations. You can provide for more
           priorities by overriding those symbols (usually defined to be "-2" and 2,
           respectively).

           When doing priority-based operations, libev usually has to linearly search all the
           priorities, so having many of them (hundreds) uses a lot of space and time, so using
           the defaults of five priorities (-2 .. +2) is usually fine.

           If your embedding application does not need any priorities, defining these both to 0
           will save some memory and CPU.

       EV_PERIODIC_ENABLE, EV_IDLE_ENABLE, EV_EMBED_ENABLE, EV_STAT_ENABLE, EV_PREPARE_ENABLE,
       EV_CHECK_ENABLE, EV_FORK_ENABLE, EV_SIGNAL_ENABLE, EV_ASYNC_ENABLE, EV_CHILD_ENABLE.
           If undefined or defined to be 1 (and the platform supports it), then the respective
           watcher type is supported. If defined to be 0, then it is not. Disabling watcher types
           mainly saves code size.

       EV_FEATURES
           If you need to shave off some kilobytes of code at the expense of some speed (but with
           the full API), you can define this symbol to request certain subsets of functionality.
           The default is to enable all features that can be enabled on the platform.

           A typical way to use this symbol is to define it to 0 (or to a bitset with some broad
           features you want) and then selectively re-enable additional parts you want, for
           example if you want everything minimal, but multiple event loop support, async and
           child watchers and the poll backend, use this:

              #define EV_FEATURES 0
              #define EV_MULTIPLICITY 1
              #define EV_USE_POLL 1
              #define EV_CHILD_ENABLE 1
              #define EV_ASYNC_ENABLE 1

           The actual value is a bitset, it can be a combination of the following values (by
           default, all of these are enabled):

           1 - faster/larger code
               Use larger code to speed up some operations.

               Currently this is used to override some inlining decisions (enlarging the code
               size by roughly 30% on amd64).

               When optimising for size, use of compiler flags such as "-Os" with gcc is
               recommended, as well as "-DNDEBUG", as libev contains a number of assertions.

               The default is off when "__OPTIMIZE_SIZE__" is defined by your compiler (e.g. gcc
               with "-Os").

           2 - faster/larger data structures
               Replaces the small 2-heap for timer management by a faster 4-heap, larger hash
               table sizes and so on. This will usually further increase code size and can
               additionally have an effect on the size of data structures at runtime.

               The default is off when "__OPTIMIZE_SIZE__" is defined by your compiler (e.g. gcc
               with "-Os").

           4 - full API configuration
               This enables priorities (sets "EV_MAXPRI"=2 and "EV_MINPRI"=-2), and enables
               multiplicity ("EV_MULTIPLICITY"=1).

           8 - full API
               This enables a lot of the "lesser used" API functions. See "ev.h" for details on
               which parts of the API are still available without this feature, and do not
               complain if this subset changes over time.

           16 - enable all optional watcher types
               Enables all optional watcher types.  If you want to selectively enable only some
               watcher types other than I/O and timers (e.g. prepare, embed, async, child...) you
               can enable them manually by defining "EV_watchertype_ENABLE" to 1 instead.

           32 - enable all backends
               This enables all backends - without this feature, you need to enable at least one
               backend manually ("EV_USE_SELECT" is a good choice).

           64 - enable OS-specific "helper" APIs
               Enable inotify, eventfd, signalfd and similar OS-specific helper APIs by default.

           Compiling with "gcc -Os -DEV_STANDALONE -DEV_USE_EPOLL=1 -DEV_FEATURES=0" reduces the
           compiled size of libev from 24.7Kb code/2.8Kb data to 6.5Kb code/0.3Kb data on my
           GNU/Linux amd64 system, while still giving you I/O watchers, timers and monotonic
           clock support.

           With an intelligent-enough linker (gcc+binutils are intelligent enough when you use
           "-Wl,--gc-sections -ffunction-sections") functions unused by your program might be
           left out as well - a binary starting a timer and an I/O watcher then might come out at
           only 5Kb.

       EV_API_STATIC
           If this symbol is defined (by default it is not), then all identifiers will have
           static linkage. This means that libev will not export any identifiers, and you cannot
           link against libev anymore. This can be useful when you embed libev, only want to use
           libev functions in a single file, and do not want its identifiers to be visible.

           To use this, define "EV_API_STATIC" and include ev.c in the file that wants to use
           libev.

           This option only works when libev is compiled with a C compiler, as C++ doesn't
           support the required declaration syntax.

       EV_AVOID_STDIO
           If this is set to 1 at compiletime, then libev will avoid using stdio functions
           (printf, scanf, perror etc.). This will increase the code size somewhat, but if your
           program doesn't otherwise depend on stdio and your libc allows it, this avoids linking
           in the stdio library which is quite big.

           Note that error messages might become less precise when this option is enabled.

       EV_NSIG
           The highest supported signal number, +1 (or, the number of signals): Normally, libev
           tries to deduce the maximum number of signals automatically, but sometimes this fails,
           in which case it can be specified. Also, using a lower number than detected (32 should
           be good for about any system in existence) can save some memory, as libev statically
           allocates some 12-24 bytes per signal number.

       EV_PID_HASHSIZE
           "ev_child" watchers use a small hash table to distribute workload by pid. The default
           size is 16 (or 1 with "EV_FEATURES" disabled), usually more than enough. If you need
           to manage thousands of children you might want to increase this value (must be a power
           of two).

       EV_INOTIFY_HASHSIZE
           "ev_stat" watchers use a small hash table to distribute workload by inotify watch id.
           The default size is 16 (or 1 with "EV_FEATURES" disabled), usually more than enough.
           If you need to manage thousands of "ev_stat" watchers you might want to increase this
           value (must be a power of two).

       EV_USE_4HEAP
           Heaps are not very cache-efficient. To improve the cache-efficiency of the timer and
           periodics heaps, libev uses a 4-heap when this symbol is defined to 1. The 4-heap uses
           more complicated (longer) code but has noticeably faster performance with many
           (thousands) of watchers.

           The default is 1, unless "EV_FEATURES" overrides it, in which case it will be 0.

       EV_HEAP_CACHE_AT
           Heaps are not very cache-efficient. To improve the cache-efficiency of the timer and
           periodics heaps, libev can cache the timestamp (at) within the heap structure
           (selected by defining "EV_HEAP_CACHE_AT" to 1), which uses 8-12 bytes more per watcher
           and a few hundred bytes more code, but avoids random read accesses on heap changes.
           This improves performance noticeably with many (hundreds) of watchers.

           The default is 1, unless "EV_FEATURES" overrides it, in which case it will be 0.

       EV_VERIFY
           Controls how much internal verification (see "ev_verify ()") will be done: If set to
           0, no internal verification code will be compiled in. If set to 1, then verification
           code will be compiled in, but not called. If set to 2, then the internal verification
           code will be called once per loop, which can slow down libev. If set to 3, then the
           verification code will be called very frequently, which will slow down libev
           considerably.

           The default is 1, unless "EV_FEATURES" overrides it, in which case it will be 0.

       EV_COMMON
           By default, all watchers have a "void *data" member. By redefining this macro to
           something else you can include more and other types of members. You have to define it
           each time you include one of the files, though, and it must be identical each time.

           For example, the perl EV module uses something like this:

              #define EV_COMMON                       \
                SV *self; /* contains this struct */  \
                SV *cb_sv, *fh /* note no trailing ";" */

       EV_CB_DECLARE (type)
       EV_CB_INVOKE (watcher, revents)
       ev_set_cb (ev, cb)
           Can be used to change the callback member declaration in each watcher, and the way
           callbacks are invoked and set. Must expand to a struct member definition and a
           statement, respectively. See the ev.h header file for their default definitions. One
           possible use for overriding these is to avoid the "struct ev_loop *" as first argument
           in all cases, or to use method calls instead of plain function calls in C++.

   EXPORTED API SYMBOLS
       If you need to re-export the API (e.g. via a DLL) and you need a list of exported symbols,
       you can use the provided Symbol.* files which list all public symbols, one per line:

          Symbols.ev      for libev proper
          Symbols.event   for the libevent emulation

       This can also be used to rename all public symbols to avoid clashes with multiple versions
       of libev linked together (which is obviously bad in itself, but sometimes it is
       inconvenient to avoid this).

       A sed command like this will create wrapper "#define"'s that you need to include before
       including ev.h:

          <Symbols.ev sed -e "s/.*/#define & myprefix_&/" >wrap.h

       This would create a file wrap.h which essentially looks like this:

          #define ev_backend     myprefix_ev_backend
          #define ev_check_start myprefix_ev_check_start
          #define ev_check_stop  myprefix_ev_check_stop
          ...

   EXAMPLES
       For a real-world example of a program the includes libev verbatim, you can have a look at
       the EV perl module (<http://software.schmorp.de/pkg/EV.html>). It has the libev files in
       the libev/ subdirectory and includes them in the EV/EVAPI.h (public interface) and EV.xs
       (implementation) files. Only the EV.xs file will be compiled. It is pretty complex because
       it provides its own header file.

       The usage in rxvt-unicode is simpler. It has a ev_cpp.h header file that everybody
       includes and which overrides some configure choices:

          #define EV_FEATURES 8
          #define EV_USE_SELECT 1
          #define EV_PREPARE_ENABLE 1
          #define EV_IDLE_ENABLE 1
          #define EV_SIGNAL_ENABLE 1
          #define EV_CHILD_ENABLE 1
          #define EV_USE_STDEXCEPT 0
          #define EV_CONFIG_H <config.h>

          #include "ev++.h"

       And a ev_cpp.C implementation file that contains libev proper and is compiled:

          #include "ev_cpp.h"
          #include "ev.c"

INTERACTION WITH OTHER PROGRAMS, LIBRARIES OR THE ENVIRONMENT

   THREADS AND COROUTINES
       THREADS

       All libev functions are reentrant and thread-safe unless explicitly documented otherwise,
       but libev implements no locking itself. This means that you can use as many loops as you
       want in parallel, as long as there are no concurrent calls into any libev function with
       the same loop parameter ("ev_default_*" calls have an implicit default loop parameter, of
       course): libev guarantees that different event loops share no data structures that need
       any locking.

       Or to put it differently: calls with different loop parameters can be done concurrently
       from multiple threads, calls with the same loop parameter must be done serially (but can
       be done from different threads, as long as only one thread ever is inside a call at any
       point in time, e.g. by using a mutex per loop).

       Specifically to support threads (and signal handlers), libev implements so-called
       "ev_async" watchers, which allow some limited form of concurrency on the same event loop,
       namely waking it up "from the outside".

       If you want to know which design (one loop, locking, or multiple loops without or
       something else still) is best for your problem, then I cannot help you, but here is some
       generic advice:

       •   most applications have a main thread: use the default libev loop in that thread, or
           create a separate thread running only the default loop.

           This helps integrating other libraries or software modules that use libev themselves
           and don't care/know about threading.

       •   one loop per thread is usually a good model.

           Doing this is almost never wrong, sometimes a better-performance model exists, but it
           is always a good start.

       •   other models exist, such as the leader/follower pattern, where one loop is handed
           through multiple threads in a kind of round-robin fashion.

           Choosing a model is hard - look around, learn, know that usually you can do better
           than you currently do :-)

       •   often you need to talk to some other thread which blocks in the event loop.

           "ev_async" watchers can be used to wake them up from other threads safely (or from
           signal contexts...).

           An example use would be to communicate signals or other events that only work in the
           default loop by registering the signal watcher with the default loop and triggering an
           "ev_async" watcher from the default loop watcher callback into the event loop
           interested in the signal.

       See also "THREAD LOCKING EXAMPLE".

       COROUTINES

       Libev is very accommodating to coroutines ("cooperative threads"): libev fully supports
       nesting calls to its functions from different coroutines (e.g. you can call "ev_run" on
       the same loop from two different coroutines, and switch freely between both coroutines
       running the loop, as long as you don't confuse yourself). The only exception is that you
       must not do this from "ev_periodic" reschedule callbacks.

       Care has been taken to ensure that libev does not keep local state inside "ev_run", and
       other calls do not usually allow for coroutine switches as they do not call any callbacks.

   COMPILER WARNINGS
       Depending on your compiler and compiler settings, you might get no or a lot of warnings
       when compiling libev code. Some people are apparently scared by this.

       However, these are unavoidable for many reasons. For one, each compiler has different
       warnings, and each user has different tastes regarding warning options. "Warn-free" code
       therefore cannot be a goal except when targeting a specific compiler and compiler-version.

       Another reason is that some compiler warnings require elaborate workarounds, or other
       changes to the code that make it less clear and less maintainable.

       And of course, some compiler warnings are just plain stupid, or simply wrong (because they
       don't actually warn about the condition their message seems to warn about). For example,
       certain older gcc versions had some warnings that resulted in an extreme number of false
       positives. These have been fixed, but some people still insist on making code warn-free
       with such buggy versions.

       While libev is written to generate as few warnings as possible, "warn-free" code is not a
       goal, and it is recommended not to build libev with any compiler warnings enabled unless
       you are prepared to cope with them (e.g. by ignoring them). Remember that warnings are
       just that: warnings, not errors, or proof of bugs.

   VALGRIND
       Valgrind has a special section here because it is a popular tool that is highly useful.
       Unfortunately, valgrind reports are very hard to interpret.

       If you think you found a bug (memory leak, uninitialised data access etc.)  in libev, then
       check twice: If valgrind reports something like:

          ==2274==    definitely lost: 0 bytes in 0 blocks.
          ==2274==      possibly lost: 0 bytes in 0 blocks.
          ==2274==    still reachable: 256 bytes in 1 blocks.

       Then there is no memory leak, just as memory accounted to global variables is not a
       memleak - the memory is still being referenced, and didn't leak.

       Similarly, under some circumstances, valgrind might report kernel bugs as if it were a bug
       in libev (e.g. in realloc or in the poll backend, although an acceptable workaround has
       been found here), or it might be confused.

       Keep in mind that valgrind is a very good tool, but only a tool. Don't make it into some
       kind of religion.

       If you are unsure about something, feel free to contact the mailing list with the full
       valgrind report and an explanation on why you think this is a bug in libev (best check the
       archives, too :). However, don't be annoyed when you get a brisk "this is no bug" answer
       and take the chance of learning how to interpret valgrind properly.

       If you need, for some reason, empty reports from valgrind for your project I suggest using
       suppression lists.

PORTABILITY NOTES

   GNU/LINUX 32 BIT LIMITATIONS
       GNU/Linux is the only common platform that supports 64 bit file/large file interfaces but
       disables them by default.

       That means that libev compiled in the default environment doesn't support files larger
       than 2GiB or so, which mainly affects "ev_stat" watchers.

       Unfortunately, many programs try to work around this GNU/Linux issue by enabling the large
       file API, which makes them incompatible with the standard libev compiled for their system.

       Likewise, libev cannot enable the large file API itself as this would suddenly make it
       incompatible to the default compile time environment, i.e. all programs not using special
       compile switches.

   OS/X AND DARWIN BUGS
       The whole thing is a bug if you ask me - basically any system interface you touch is
       broken, whether it is locales, poll, kqueue or even the OpenGL drivers.

       "kqueue" is buggy

       The kqueue syscall is broken in all known versions - most versions support only sockets,
       many support pipes.

       Libev tries to work around this by not using "kqueue" by default on this rotten platform,
       but of course you can still ask for it when creating a loop - embedding a socket-only
       kqueue loop into a select-based one is probably going to work well.

       "poll" is buggy

       Instead of fixing "kqueue", Apple replaced their (working) "poll" implementation by
       something calling "kqueue" internally around the 10.5.6 release, so now "kqueue" and
       "poll" are broken.

       Libev tries to work around this by not using "poll" by default on this rotten platform,
       but of course you can still ask for it when creating a loop.

       "select" is buggy

       All that's left is "select", and of course Apple found a way to fuck this one up as well:
       On OS/X, "select" actively limits the number of file descriptors you can pass in to 1024 -
       your program suddenly crashes when you use more.

       There is an undocumented "workaround" for this - defining "_DARWIN_UNLIMITED_SELECT",
       which libev tries to use, so select should work on OS/X.

   SOLARIS PROBLEMS AND WORKAROUNDS
       "errno" reentrancy

       The default compile environment on Solaris is unfortunately so thread-unsafe that you
       can't even use components/libraries compiled without "-D_REENTRANT" in a threaded program,
       which, of course, isn't defined by default. A valid, if stupid, implementation choice.

       If you want to use libev in threaded environments you have to make sure it's compiled with
       "_REENTRANT" defined.

       Event port backend

       The scalable event interface for Solaris is called "event ports". Unfortunately, this
       mechanism is very buggy in all major releases. If you run into high CPU usage, your
       program freezes or you get a large number of spurious wakeups, make sure you have all the
       relevant and latest kernel patches applied. No, I don't know which ones, but there are
       multiple ones to apply, and afterwards, event ports actually work great.

       If you can't get it to work, you can try running the program by setting the environment
       variable "LIBEV_FLAGS=3" to only allow "poll" and "select" backends.

   AIX POLL BUG
       AIX unfortunately has a broken "poll.h" header. Libev works around this by trying to avoid
       the poll backend altogether (i.e. it's not even compiled in), which normally isn't a big
       problem as "select" works fine with large bitsets on AIX, and AIX is dead anyway.

   WIN32 PLATFORM LIMITATIONS AND WORKAROUNDS
       General issues

       Win32 doesn't support any of the standards (e.g. POSIX) that libev requires, and its I/O
       model is fundamentally incompatible with the POSIX model. Libev still offers limited
       functionality on this platform in the form of the "EVBACKEND_SELECT" backend, and only
       supports socket descriptors. This only applies when using Win32 natively, not when using
       e.g. cygwin. Actually, it only applies to the microsofts own compilers, as every compiler
       comes with a slightly differently broken/incompatible environment.

       Lifting these limitations would basically require the full re-implementation of the I/O
       system. If you are into this kind of thing, then note that glib does exactly that for you
       in a very portable way (note also that glib is the slowest event library known to man).

       There is no supported compilation method available on windows except embedding it into
       other applications.

       Sensible signal handling is officially unsupported by Microsoft - libev tries its best,
       but under most conditions, signals will simply not work.

       Not a libev limitation but worth mentioning: windows apparently doesn't accept large
       writes: instead of resulting in a partial write, windows will either accept everything or
       return "ENOBUFS" if the buffer is too large, so make sure you only write small amounts
       into your sockets (less than a megabyte seems safe, but this apparently depends on the
       amount of memory available).

       Due to the many, low, and arbitrary limits on the win32 platform and the abysmal
       performance of winsockets, using a large number of sockets is not recommended (and not
       reasonable). If your program needs to use more than a hundred or so sockets, then likely
       it needs to use a totally different implementation for windows, as libev offers the POSIX
       readiness notification model, which cannot be implemented efficiently on windows (due to
       Microsoft monopoly games).

       A typical way to use libev under windows is to embed it (see the embedding section for
       details) and use the following evwrap.h header file instead of ev.h:

          #define EV_STANDALONE              /* keeps ev from requiring config.h */
          #define EV_SELECT_IS_WINSOCKET 1   /* configure libev for windows select */

          #include "ev.h"

       And compile the following evwrap.c file into your project (make sure you do not compile
       the ev.c or any other embedded source files!):

          #include "evwrap.h"
          #include "ev.c"

       The winsocket "select" function

       The winsocket "select" function doesn't follow POSIX in that it requires socket handles
       and not socket file descriptors (it is also extremely buggy). This makes select very
       inefficient, and also requires a mapping from file descriptors to socket handles (the
       Microsoft C runtime provides the function "_open_osfhandle" for this). See the discussion
       of the "EV_SELECT_USE_FD_SET", "EV_SELECT_IS_WINSOCKET" and "EV_FD_TO_WIN32_HANDLE"
       preprocessor symbols for more info.

       The configuration for a "naked" win32 using the Microsoft runtime libraries and raw
       winsocket select is:

          #define EV_USE_SELECT 1
          #define EV_SELECT_IS_WINSOCKET 1   /* forces EV_SELECT_USE_FD_SET, too */

       Note that winsockets handling of fd sets is O(n), so you can easily get a complexity in
       the O(nAX) range when using win32.

       Limited number of file descriptors

       Windows has numerous arbitrary (and low) limits on things.

       Early versions of winsocket's select only supported waiting for a maximum of 64 handles
       (probably owning to the fact that all windows kernels can only wait for 64 things at the
       same time internally; Microsoft recommends spawning a chain of threads and wait for 63
       handles and the previous thread in each. Sounds great!).

       Newer versions support more handles, but you need to define "FD_SETSIZE" to some high
       number (e.g. 2048) before compiling the winsocket select call (which might be in libev or
       elsewhere, for example, perl and many other interpreters do their own select emulation on
       windows).

       Another limit is the number of file descriptors in the Microsoft runtime libraries, which
       by default is 64 (there must be a hidden 64 fetish or something like this inside
       Microsoft). You can increase this by calling "_setmaxstdio", which can increase this limit
       to 2048 (another arbitrary limit), but is broken in many versions of the Microsoft runtime
       libraries. This might get you to about 512 or 2048 sockets (depending on windows version
       and/or the phase of the moon). To get more, you need to wrap all I/O functions and provide
       your own fd management, but the cost of calling select (O(nAX)) will likely make this
       unworkable.

   PORTABILITY REQUIREMENTS
       In addition to a working ISO-C implementation and of course the backend-specific APIs,
       libev relies on a few additional extensions:

       "void (*)(ev_watcher_type *, int revents)" must have compatible calling conventions
       regardless of "ev_watcher_type *".
           Libev assumes not only that all watcher pointers have the same internal structure
           (guaranteed by POSIX but not by ISO C for example), but it also assumes that the same
           (machine) code can be used to call any watcher callback: The watcher callbacks have
           different type signatures, but libev calls them using an "ev_watcher *" internally.

       pointer accesses must be thread-atomic
           Accessing a pointer value must be atomic, it must both be readable and writable in one
           piece - this is the case on all current architectures.

       "sig_atomic_t volatile" must be thread-atomic as well
           The type "sig_atomic_t volatile" (or whatever is defined as "EV_ATOMIC_T") must be
           atomic with respect to accesses from different threads. This is not part of the
           specification for "sig_atomic_t", but is believed to be sufficiently portable.

       "sigprocmask" must work in a threaded environment
           Libev uses "sigprocmask" to temporarily block signals. This is not allowed in a
           threaded program ("pthread_sigmask" has to be used). Typical pthread implementations
           will either allow "sigprocmask" in the "main thread" or will block signals process-
           wide, both behaviours would be compatible with libev. Interaction between
           "sigprocmask" and "pthread_sigmask" could complicate things, however.

           The most portable way to handle signals is to block signals in all threads except the
           initial one, and run the signal handling loop in the initial thread as well.

       "long" must be large enough for common memory allocation sizes
           To improve portability and simplify its API, libev uses "long" internally instead of
           "size_t" when allocating its data structures. On non-POSIX systems (Microsoft...) this
           might be unexpectedly low, but is still at least 31 bits everywhere, which is enough
           for hundreds of millions of watchers.

       "double" must hold a time value in seconds with enough accuracy
           The type "double" is used to represent timestamps. It is required to have at least 51
           bits of mantissa (and 9 bits of exponent), which is good enough for at least into the
           year 4000 with millisecond accuracy (the design goal for libev). This requirement is
           overfulfilled by implementations using IEEE 754, which is basically all existing ones.

           With IEEE 754 doubles, you get microsecond accuracy until at least the year 2255 (and
           millisecond accuracy till the year 287396 - by then, libev is either obsolete or
           somebody patched it to use "long double" or something like that, just kidding).

       If you know of other additional requirements drop me a note.

ALGORITHMIC COMPLEXITIES

       In this section the complexities of (many of) the algorithms used inside libev will be
       documented. For complexity discussions about backends see the documentation for
       "ev_default_init".

       All of the following are about amortised time: If an array needs to be extended, libev
       needs to realloc and move the whole array, but this happens asymptotically rarer with
       higher number of elements, so O(1) might mean that libev does a lengthy realloc operation
       in rare cases, but on average it is much faster and asymptotically approaches constant
       time.

       Starting and stopping timer/periodic watchers: O(log skipped_other_timers)
           This means that, when you have a watcher that triggers in one hour and there are 100
           watchers that would trigger before that, then inserting will have to skip roughly
           seven ("ld 100") of these watchers.

       Changing timer/periodic watchers (by autorepeat or calling again): O(log
       skipped_other_timers)
           That means that changing a timer costs less than removing/adding them, as only the
           relative motion in the event queue has to be paid for.

       Starting io/check/prepare/idle/signal/child/fork/async watchers: O(1)
           These just add the watcher into an array or at the head of a list.

       Stopping check/prepare/idle/fork/async watchers: O(1)
       Stopping an io/signal/child watcher: O(number_of_watchers_for_this_(fd/signal/pid %
       EV_PID_HASHSIZE))
           These watchers are stored in lists, so they need to be walked to find the correct
           watcher to remove. The lists are usually short (you don't usually have many watchers
           waiting for the same fd or signal: one is typical, two is rare).

       Finding the next timer in each loop iteration: O(1)
           By virtue of using a binary or 4-heap, the next timer is always found at a fixed
           position in the storage array.

       Each change on a file descriptor per loop iteration: O(number_of_watchers_for_this_fd)
           A change means an I/O watcher gets started or stopped, which requires libev to
           recalculate its status (and possibly tell the kernel, depending on backend and whether
           "ev_io_set" was used).

       Activating one watcher (putting it into the pending state): O(1)
       Priority handling: O(number_of_priorities)
           Priorities are implemented by allocating some space for each priority. When doing
           priority-based operations, libev usually has to linearly search all the priorities,
           but starting/stopping and activating watchers becomes O(1) with respect to priority
           handling.

       Sending an ev_async: O(1)
       Processing ev_async_send: O(number_of_async_watchers)
       Processing signals: O(max_signal_number)
           Sending involves a system call iff there were no other "ev_async_send" calls in the
           current loop iteration and the loop is currently blocked. Checking for async and
           signal events involves iterating over all running async watchers or all signal
           numbers.

PORTING FROM LIBEV 3.X TO 4.X

       The major version 4 introduced some incompatible changes to the API.

       At the moment, the "ev.h" header file provides compatibility definitions for all changes,
       so most programs should still compile. The compatibility layer might be removed in later
       versions of libev, so better update to the new API early than late.

       "EV_COMPAT3" backwards compatibility mechanism
           The backward compatibility mechanism can be controlled by "EV_COMPAT3". See
           "PREPROCESSOR SYMBOLS/MACROS" in the "EMBEDDING" section.

       "ev_default_destroy" and "ev_default_fork" have been removed
           These calls can be replaced easily by their "ev_loop_xxx" counterparts:

              ev_loop_destroy (EV_DEFAULT_UC);
              ev_loop_fork (EV_DEFAULT);

       function/symbol renames
           A number of functions and symbols have been renamed:

             ev_loop         => ev_run
             EVLOOP_NONBLOCK => EVRUN_NOWAIT
             EVLOOP_ONESHOT  => EVRUN_ONCE

             ev_unloop       => ev_break
             EVUNLOOP_CANCEL => EVBREAK_CANCEL
             EVUNLOOP_ONE    => EVBREAK_ONE
             EVUNLOOP_ALL    => EVBREAK_ALL

             EV_TIMEOUT      => EV_TIMER

             ev_loop_count   => ev_iteration
             ev_loop_depth   => ev_depth
             ev_loop_verify  => ev_verify

           Most functions working on "struct ev_loop" objects don't have an "ev_loop_" prefix, so
           it was removed; "ev_loop", "ev_unloop" and associated constants have been renamed to
           not collide with the "struct ev_loop" anymore and "EV_TIMER" now follows the same
           naming scheme as all other watcher types. Note that "ev_loop_fork" is still called
           "ev_loop_fork" because it would otherwise clash with the "ev_fork" typedef.

       "EV_MINIMAL" mechanism replaced by "EV_FEATURES"
           The preprocessor symbol "EV_MINIMAL" has been replaced by a different mechanism,
           "EV_FEATURES". Programs using "EV_MINIMAL" usually compile and work, but the library
           code will of course be larger.

GLOSSARY

       active
           A watcher is active as long as it has been started and not yet stopped.  See "WATCHER
           STATES" for details.

       application
           In this document, an application is whatever is using libev.

       backend
           The part of the code dealing with the operating system interfaces.

       callback
           The address of a function that is called when some event has been detected. Callbacks
           are being passed the event loop, the watcher that received the event, and the actual
           event bitset.

       callback/watcher invocation
           The act of calling the callback associated with a watcher.

       event
           A change of state of some external event, such as data now being available for reading
           on a file descriptor, time having passed or simply not having any other events
           happening anymore.

           In libev, events are represented as single bits (such as "EV_READ" or "EV_TIMER").

       event library
           A software package implementing an event model and loop.

       event loop
           An entity that handles and processes external events and converts them into callback
           invocations.

       event model
           The model used to describe how an event loop handles and processes watchers and
           events.

       pending
           A watcher is pending as soon as the corresponding event has been detected. See
           "WATCHER STATES" for details.

       real time
           The physical time that is observed. It is apparently strictly monotonic :)

       wall-clock time
           The time and date as shown on clocks. Unlike real time, it can actually be wrong and
           jump forwards and backwards, e.g. when you adjust your clock.

       watcher
           A data structure that describes interest in certain events. Watchers need to be
           started (attached to an event loop) before they can receive events.

AUTHOR

       Marc Lehmann <libev@schmorp.de>, with repeated corrections by Mikael Magnusson and
       Emanuele Giaquinta, and minor corrections by many others.