Ubuntu Manpage: inet — Internet protocol family

Provided by: freebsd-manpages_9.2+1-1_all

NAME

       inet — Internet protocol family

SYNOPSIS

       #include <sys/types.h>
       #include <netinet/in.h>

DESCRIPTION

       The  Internet  protocol  family  is  a  collection  of  protocols layered atop the Internet Protocol (IP)
       transport layer, and utilizing the Internet  address  format.   The  Internet  family  provides  protocol
       support  for  the  SOCK_STREAM,  SOCK_DGRAM,  and  SOCK_RAW socket types; the SOCK_RAW interface provides
       access to the IP protocol.

ADDRESSING

       Internet addresses are four byte  quantities,  stored  in  network  standard  format  (on  little  endian
       machines,  such  as  the alpha, amd64, i386 and ia64 these are word and byte reversed).  The include file
       <netinet/in.h> defines this address as a discriminated union.

       Sockets bound to the Internet protocol family utilize the following addressing structure,

             struct sockaddr_in {
                     uint8_t         sin_len;
                     sa_family_t     sin_family;
                     in_port_t       sin_port;
                     struct in_addr  sin_addr;
                     char            sin_zero[8];
             };

       Sockets may be created with the local address  INADDR_ANY  to  affect  “wildcard”  matching  on  incoming
       messages.   The address in a connect(2) or sendto(2) call may be given as INADDR_ANY to mean “this host”.
       The distinguished address INADDR_BROADCAST is allowed as a shorthand for the  broadcast  address  on  the
       primary network if the first network configured supports broadcast.

PROTOCOLS

The Internet protocol family is comprised of the IP network protocol, Internet Control Message Protocol
(ICMP), Internet Group Management Protocol (IGMP), Transmission Control Protocol (TCP), and User Datagram
Protocol (UDP). TCP is used to support the SOCK_STREAM abstraction while UDP is used to support the
SOCK_DGRAM abstraction. A raw interface to IP is available by creating an Internet socket of type
SOCK_RAW. The ICMP message protocol is accessible from a raw socket.

The 32-bit Internet address contains both network and host parts. However, direct examination of
addresses is discouraged. For those programs which absolutely need to break addresses into their
component parts, the following ioctl(2) commands are provided for a datagram socket in the Internet
domain; they have the same form as the SIOCIFADDR command (see intro(4)).

SIOCSIFNETMASK Set interface network mask. The network mask defines the network part of the address; if
it contains more of the address than the address type would indicate, then subnets are in
use.

SIOCGIFNETMASK Get interface network mask.

MIB Variables
A number of variables are implemented in the net.inet branch of the sysctl(3) MIB. In addition to the
variables supported by the transport protocols (for which the respective manual pages may be consulted),
the following general variables are defined:

IPCTL_FORWARDING (ip.forwarding) Boolean: enable/disable forwarding of IP packets. Defaults to off.

IPCTL_FASTFORWARDING (ip.fastforwarding) Boolean: enable/disable the use of fast IP forwarding code.
Defaults to off. When fast IP forwarding is enabled, IP packets are forwarded
directly to the appropriate network interface with direct processing to completion,
which greatly improves the throughput. All packets for local IP addresses, non-
unicast, or with IP options are handled by the normal IP input processing path.
All features of the normal (slow) IP forwarding path are supported including
firewall (through pfil(9) hooks) checking, except ipsec(4) tunnel brokering. The
IP fastforwarding path does not generate ICMP redirect or source quench messages.

IPCTL_SENDREDIRECTS (ip.redirect) Boolean: enable/disable sending of ICMP redirects in response to IP
packets for which a better, and for the sender directly reachable, route and next
hop is known. Defaults to on.

IPCTL_DEFTTL (ip.ttl) Integer: default time-to-live (“TTL”) to use for outgoing IP packets.

IPCTL_ACCEPTSOURCEROUTE
(ip.accept_sourceroute) Boolean: enable/disable accepting of source-routed IP
packets (default false).

IPCTL_SOURCEROUTE (ip.sourceroute) Boolean: enable/disable forwarding of source-routed IP packets
(default false).

IPCTL_RTEXPIRE (ip.rtexpire) Integer: lifetime in seconds of protocol-cloned IP routes after the
last reference drops (default one hour). This value varies dynamically as
described above.

IPCTL_RTMINEXPIRE (ip.rtminexpire) Integer: minimum value of ip.rtexpire (default ten seconds). This
value has no effect on user modifications, but restricts the dynamic adaptation
described above.

IPCTL_RTMAXCACHE (ip.rtmaxcache) Integer: trigger level of cached, unreferenced, protocol-cloned
routes which initiates dynamic adaptation (default 128).

ip.process_options Integer: control IP options processing. By setting this variable to 0, all IP
options in the incoming packets will be ignored, and the packets will be passed
unmodified. By setting to 1, IP options in the incoming packets will be processed
accordingly. By setting to 2, an ICMP “prohibited by filter” message will be sent
back in response to incoming packets with IP options. Default is 1. This
sysctl(8) variable affects packets destined for a local host as well as packets
forwarded to some other host.

ip.random_id Boolean: control IP IDs generation behaviour. Setting this sysctl(8) to non-zero
causes the ID field in IP packets to be randomized instead of incremented by 1 with
each packet generated. This closes a minor information leak which allows remote
observers to determine the rate of packet generation on the machine by watching the
counter. In the same time, on high-speed links, it can decrease the ID reuse cycle
greatly. Default is 0 (sequential IP IDs). IPv6 flow IDs and fragment IDs are
always random.

ip.maxfragpackets Integer: maximum number of fragmented packets the host will accept and hold in the
reassembling queue simultaneously. 0 means that the host will not accept any
fragmented packets. -1 means that the host will accept as many fragmented packets
as it receives.

ip.maxfragsperpacket Integer: maximum number of fragments the host will accept and hold in the
reassembling queue for a packet. 0 means that the host will not accept any
fragmented packets.

HISTORY

       The inet protocol interface appeared in 4.2BSD.  The “protocol cloning” code appeared in FreeBSD 2.1.

CAVEATS

       The Internet protocol support is subject to change as the Internet protocols develop.  Users  should  not
       depend on details of the current implementation, but rather the services exported.

Debian                                            April 9, 2005                                          INET(4)