Provided by: freebsd-manpages_9.2+1-1_all 
NAME
ng_ccatm — ATM Call Control netgraph node type
SYNOPSIS
#include <netnatm/unimsg.h>
#include <netnatm/msg/unistruct.h>
#include <netnatm/sig/unidef.h>
#include <netnatm/api/unisap.h>
#include <netnatm/api/atmapi.h>
#include <netnatm/api/ccatm.h>
#include <netgraph.h>
#include <netgraph/ng_uni.h>
#include <netgraph/ng_ccatm.h>
DESCRIPTION
The ng_ccatm node implements the API specified by the ATM Forum for access to ATM services
(see ATM-Forum document af-saa-0108). This document specifies the semantics of the API, not
the exact language binding. For this reason, it is expected that this implementation is
neither compile-time nor binary compatible with other implementations of this API. It
should, however, be fairly straightforward to convert between different API implementations.
This node is usually stacked on top of one or more UNI nodes (see ng_uni(4)). Each of these
hooks appears as a “port” to the user of the node. It also has one hook connected to the
ILMI daemon for management purposes.
The node is removed when it receives a NGM_SHUTDOWN messages or when all hooks are
disconnected.
HOOKS
The node understands a number of hooks with predefined names and an unlimited number of
hooks for user connections. The predefined names are:
uniNNN These hooks stack the ng_ccatm node on top of a UNI stack. The node expects the
interface on these hooks to conform to the upper interface specified in ng_uni(4).
These hooks are forced into queuing mode, so that there are no circular calls from
call control to UNI and UNI back to call control. The NNN in the hook name is the
decimal port number and should not be zero. The port number is a 32-bit unsigned
integer.
manage This hook should be connected to the ILMI daemon. No data is ever sent on this
hook and all received data is discarded. The hook is used to send control messages
along.
dump On receipt of a NGM_CCATM_DUMP command a textual description of the current state
of the node is sent out of this hook. This text is sent as one large message
consisting of more than one mbuf.
All other hook names are taken to be user hooks and correspond to an ATM endpoint as
specified in the ATM Forum document. The interface on these hooks is defined in <atmapi.h>
and uses a structure
struct ccatm_op {
u_int32_t op; /* request code */
u_char data[]; /* optional data */
};
This structure is followed directly by the data for the operation. The opcode is one of the
following:
enum atmop {
ATMOP_RESP,
ATMOP_ABORT_CONNECTION,
ATMOP_ACCEPT_INCOMING_CALL,
ATMOP_ADD_PARTY,
ATMOP_ADD_PARTY_REJECT,
ATMOP_ADD_PARTY_SUCCESS,
ATMOP_ARRIVAL_OF_INCOMING_CALL,
ATMOP_CALL_RELEASE,
ATMOP_CONNECT_OUTGOING_CALL,
ATMOP_DROP_PARTY,
ATMOP_GET_LOCAL_PORT_INFO,
ATMOP_P2MP_CALL_ACTIVE,
ATMOP_P2P_CALL_ACTIVE,
ATMOP_PREPARE_INCOMING_CALL,
ATMOP_PREPARE_OUTGOING_CALL,
ATMOP_QUERY_CONNECTION_ATTRIBUTES,
ATMOP_REJECT_INCOMING_CALL,
ATMOP_SET_CONNECTION_ATTRIBUTES,
ATMOP_WAIT_ON_INCOMING_CALL,
ATMOP_SET_CONNECTION_ATTRIBUTES_X,
ATMOP_QUERY_CONNECTION_ATTRIBUTES_X,
ATMOP_QUERY_STATE
};
These codes correspond directly to the operations specified in the ATM Forum document with
the following exceptions:
ATMOP_RESP
As discussed in ng_uni(4), this is used to “synchronify” the interface. The
argument is a
struct atm_resp {
int32_t resp;
uint32_t data; /* type of attached data */
};
If the response code resp is zero, the node has accepted the user request. If
something goes wrong, resp contains an error code. For requests that return data,
data contains a code describing the type of data and the data itself starts
immediately after the structure.
ATMOP_QUERY_CONNECTION_ATTRIBUTES_X
This is the same as ATMOP_QUERY_CONNECTION_ATTRIBUTES except that it allows to query
several attributes within one request.
ATMOP_SET_CONNECTION_ATTRIBUTES_X
This is the same as ATMOP_SET_CONNECTION_ATTRIBUTES except that it allows to set
several attributes within one request. The list of attributes is followed directly
by the attributes in the same order as they appear in the list.
If a user hook is disconnected, an active connection on that hook is released. Incoming
connections waiting to be accepted are reoffered to other listening hooks or rejected.
CONTROL MESSAGES
Besides the generic messages the node understands the following special messages:
NGM_CCATM_DUMP
This causes the internal state of the node to be dumped in ASCII to the dump hook.
NGM_CCATM_STOP
This message causes all connections on that port to be aborted (not released!) and
all ATM endpoints which are bound to that port to be closed. It stops processing of
all messages from the UNI stack on that port UNI stack. The argument is a
struct ngm_ccatm_port {
uint32_t port;
};
NGM_CCATM_START
Start processing on the port. The argument is a ngm_ccatm_port structure.
NGM_CCATM_CLEAR
This message takes a ngm_ccatm_port structure and clears all prefixes and addresses
on that port. If the port number is zero, all ports are cleared.
NGM_CCATM_GET_ADDRESSES
Get the list of all registered addresses on the given port. The argument is a
ngm_ccatm_port structure and the result is a ngm_ccatm_get_addresses structure:
struct ngm_ccatm_get_addresses {
uint32_t count;
struct ngm_ccatm_address_req addr[0];
};
struct ngm_ccatm_address_req {
u_int32_t port;
struct uni_addr addr;
};
If the port field is zero in the request, all addresses on all ports are returned.
If it is not zero, only the addresses on that port are reported. The number of
addresses is returned in the count field.
NGM_CCATM_ADDRESS_REGISTERED
This message is used by ILMI to inform the ng_ccatm node that a previous address
registration request was successful. This causes the node to activate that address.
The argument to the message is a ngm_ccatm_address_req structure.
NGM_CCATM_ADDRESS_UNREGISTERED
This message is used by ILMI to inform the ng_ccatm node that an address has been
unregistered. The node clears that address from its tables. The argument is a
ngm_ccatm_address_req structure.
NGM_CCATM_SET_PORT_PARAM
This request sets the parameters on the given port. The argument is a
struct ngm_ccatm_atm_port {
uint32_t port; /* port for which to set parameters */
uint32_t pcr; /* port peak cell rate */
uint32_t max_vpi_bits;
uint32_t max_vci_bits;
uint32_t max_svpc_vpi;
uint32_t max_svcc_vpi;
uint32_t min_svcc_vci;
uint8_t esi[6];
uint32_t num_addr;
};
This should be used only by ILMI and when that port is stopped and the address and
prefix tables of that port are empty. The num_addr field is ignored.
NGM_CCATM_GET_PORT_PARAM
Retrieve the parameters of the given port. The argument is a ngm_ccatm_port and the
result a ngm_ccatm_atm_port.
NGM_CCATM_GET_PORTLIST
Get a list of all available ports on that node. This is returned as a
struct ngm_ccatm_portlist {
uint32_t nports;
uint32_t ports[];
};
NGM_CCATM_GETSTATE
Return the state of a port. The argument is a struct ngm_ccatm_port and the return
values as a uint32_t.
NGM_CCATM_SETLOG
This requests sets a new logging level and returns the previous one. The argument
is either a uint32_t in which case it specifies the new logging level, or may be
empty in which case just the old level is returned as a uint32_t.
NGM_CCATM_RESET
Reset the node. This is allowed only if the number of user hooks and connected UNI
stacks is zero.
NGM_CCATM_GET_EXSTAT
Return extended status information from the node.
SEE ALSO
netgraph(4), ng_uni(4), ngctl(8)
AUTHORS
Harti Brandt <harti@FreeBSD.org>