Ubuntu Manpage: amd.conf - Amd configuration file

Provided by: am-utils_6.2+rc20110530-3.2ubuntu1_amd64

NAME

       amd.conf - Amd configuration file

SYNOPSIS

       amd.conf

DESCRIPTION

       The amd.conf file is the configuration file for Amd, as part of the am-utils suite.

       amd.conf contains runtime configuration information for the Amd automounter program.

FILE FORMAT

       The  file  consists  of  sections  and  parameters.  A section begins with the name of the
       section in square brackets and continues until the next section begins or the end the file
       is reached.  Sections contain parameters of the form 'name = value'.

       The  file  is  line-based  -  that  is,  each  newline-terminated line represents either a
       comment, a section name or a parameter.  No line-continuation syntax is available.

       Section, parameter names and their values are case sensitive.

       Only the first equals sign in a parameter is significant.  Whitespace before or after  the
       first  equals sign is discarded.  Leading, trailing and internal whitespace in section and
       parameter names is irrelevant.  Leading and trailing whitespace in a  parameter  value  is
       discarded.   Internal whitespace within a parameter value is not allowed, unless the whole
       parameter value is quoted with double quotes as in 'name = "some value"'.

       Any line beginning with a pound  sign  (#)  is  ignored,  as  are  lines  containing  only
       whitespace.

       The  values  following  the  equals  sign in parameters are all either a string (no quotes
       needed if string does not include spaces) or a boolean, which  may  be  given  as  yes/no.
       Case is significant in all values.  Some items such as cache timeouts are numeric.

SECTIONS

   The [global] section
       Parameters  in  this  section  either apply to Amd as a whole, or to all other regular map
       sections  which  follow.   There  should  be  only  one  global  section  defined  in  one
       configuration file.

       It  is  highly recommended that this section be specified first in the configuration file.
       If it is not, then regular map sections which  precede  it  will  not  use  global  values
       defined later.

   Regular [/map] sections
       Parameters  in regular (non-global) sections apply to a single map entry.  For example, if
       the map section [/homes] is defined, then all parameters following it will be  applied  to
       the /homes Amd-managed mount point.

PARAMETERS

Parameters common to all sections
These parameters can be specified either in the global or a map specific section. Entries
specified in a map-specific section override the default value or one defined in the
global section. If such a common parameter is specified only in the global section, it
is applicable to all regular map sections that follow.

browsable_dirs (string, default=no)
If "yes," then Amd's top-level mount points will be browsable to readdir(3) calls.
This means you could run for example ls(1) and see what keys are available to mount
in that directory. Not all entries are made visible to readdir(3): the "/default"
entry, wildcard entries, and those with a "/" in them are not included. If you
specify "full" to this option, all but "/default" will be visible. Note that if
you run a command which will attempt to stat(2) the entries, such as often done by
"ls -l" or "ls -F," Amd will attempt to mount every entry in that map. This is
often called a ``mount storm.''

map_defaults (string, default to empty)
This option sets a string to be used as the map's /defaults entry, overriding any
/defaults specified in the map. This allows local users to override map defaults
without modifying maps globally.

map_options (string, default no options)
This option is the same as specifying map options on the command line to Amd, such
as "cache:=all".

map_type (string, default search all map types)
If specified, Amd will initialize the map only for the type given. This is useful
to avoid the default map search type used by Amd which takes longer and can have
undesired side-effects such as initializing NIS even if not used. Possible values
are

exec executable maps
file plain files
hesiod Hesiod name service from MIT
ldap Lightweight Directory Access Protocol
ndbm (New) dbm style hash files
nis Network Information Services (version 2)
nisplus Network Information Services Plus (version 3)
passwd local password files
union union maps

mount_type (string, default=nfs)
All Amd mount types default to NFS. That is, Amd is an NFS server on the map mount
points, for the local host it is running on. If "autofs" is specified, Amd will be
an autofs server for those mount points.

autofs_use_lofs (string, default=yes)
When set to "yes" and using Autofs, Amd will use lofs-type (loopback) mounts for
type:=link mounts. This has the advantage of mounting in place, and users get to
the see the same pathname that they chdir'ed into. If this option is set to "no,"
then Amd will use symlinks instead: that code is more tested, but negates autofs's
big advantage of in-place mounts.

search_path (string, default no search path)
This provides a (colon-delimited) search path for file maps. Using a search path,
sites can allow for local map customizations and overrides, and can distributed
maps in several locations as needed.

selectors_in_defaults (boolean, default=no)
If "yes," then the /defaults entry of maps will search for and process any
selectors before setting defaults for all other keys in that map. Useful when you
want to set different options for a complete map based on some parameters. For
example, you may want to better the NFS performance over slow slip-based networks
as follows:

/defaults \
wire==slip-net;opts:=intr,rsize=1024,wsize=1024 \
wire!=slip-net;opts:=intr,rsize=8192,wsize=8192

Deprecated form: selectors_on_default

sun_map_syntax (boolean, default=no)
If "yes," then Amd will parse the map according to the Sun Automount syntax.

Parameters applicable to the global section only
arch (string, default to compiled in value)
Same as the -A option to Amd. Allows you to override the value of the arch Amd
variable.

auto_attrcache (numeric, default=0)
Specify in seconds (or units of 0.1 seconds, depending on the OS), what is the
(kernel-side) NFS attribute cache timeout for @i{Amd}'s own automount points. A
value of 0 is supposed to turn off attribute caching, meaning that @i{Amd} will be
consulted via a kernel-RPC each time someone stat()'s the mount point (which could
be abused as a denial-of-service attack). Warning: some OSs are incapable of
turning off the NFS attribute cache reliably. On such systems, Amd may not work
reliably under heavy load. See the README.attrcache document in the Am-utils
distribution for more details.

auto_dir (string, default=/a)
Same as the -a option to Amd. This sets the private directory where Amd will
create sub-directories for its real mount points.

cache_duration (numeric, default=300)
Same as the -c option to Amd. Sets the duration in seconds that looked-up or
mounted map entries remain in the cache.

cluster (string, default no cluster)
Same as the -C option to Amd. Specifies the alternate HP-UX cluster to use.

debug_mtab_file (string, default=/tmp/mnttab)
Path to mtab file that is used by Amd to store a list of mounted file systems
during debug-mtab mode. This option only applies to systems that store mtab
information on disk.

debug_options (string, default no debug options)
Same as the -D option to Amd. Specify any debugging options for Amd. Works only
if am-utils was configured for debugging using the --enable-debug option. The
"mem" option, as well as all other options, can be turned on via --enable-
debug=mem. Otherwise debugging options are ignored. Options are comma delimited,
and can be preceded by the string "no" to negate their meaning. You can get the
list of supported debugging options by running Amd -H. Possible values are:

all all options (excludes hrtime and mtab)
defaults "sensible" default options (all--excluding hrtime, mtab, and xdrtrace)
test full debug options plus mtab,nodaemon,nofork,noamq
amq register for amq
daemon enter daemon mode
fork fork server
full program trace
hrtime print high resolution time stamps (only if syslog(3) is not used)
info info service specific debugging (hesiod, nis, etc.)
mem trace memory allocations
mtab use local "/tmp/mtab" file
readdir show browsable_dirs progress
str debug string munging
trace trace protocol and NFS mount arguments
xdrtrace trace XDR routines

dismount_interval (numeric, default=120)
Same as the -w option to Amd. Specify in seconds, the time between attempts to
dismount file systems that have exceeded their cached times.

domain_strip (boolean, default=yes)
If "yes," then the domain name part referred to by ${rhost} is stripped off. This
is useful to keep logs and smaller. If "no," then the domain name part is left
changed. This is useful when using multiple domains with the same maps (as you may
have hosts whose domain-stripped name is identical).

exec_map_timeout (numeric, default=10)
The timeout in seconds that Amd will wait for an executable map program before an
answer is returned from that program (or script). This value should be set to as
small as possible while still allowing normal replies to be returned before the
timer expires, because during the time that the executable map program is queried,
Amd is essentially waiting and is thus not responding to any other queries.

forced_unmounts (boolean, default=no)
If set to "yes," and the client OS supports forced or lazy unmounts, then Amd will
attempt to use them if it gets any of three serious error conditions when trying to
unmount an existing mount point or mount on top of one: EIO, ESTALE, or EBUSY.

This could be useful to recover from serious conditions such as hardware failure of
mounted disks, or NFS servers which are down permanently, were migrated, or changed
their IP address. Only "type:=toplvl" mounts hung with EBUSY are forcibly
unmounted using this option, which is useful to recover from a hung Amd).

full_os (string, default to compiled in value)
The full name of the operating system, along with its version. Allows you to
override the compiled-in full name and version of the operating system. Useful
when the compiled-in name is not desired. For example, the full operating system
name on linux comes up as ``linux'', but you can override it to ``linux-2.2.5.''

fully_qualified_hosts (string, default=no)
If "yes," Amd will perform RPC authentication using fully-qualified host names.
This is necessary for some systems, and especially when performing cross-domain
mounting. For this function to work, the Amd variable ${hostd} is used, requiring
that ${domain} not be null.

hesiod_base (string, default=automount)
Specify the base name for hesiod maps.

karch (string, default to karch of the system)
Same as the -k option to Amd. Allows you to override the kernel-architecture of
your system. Useful for example on Sun (Sparc) machines, where you can build one
Amd binary, and run it on multiple machines, yet you want each one to get the
correct karch variable set (for example, sun4c, sun4m, sun4u, etc.) Note that if
not specified, Amd will use uname(3) to figure out the kernel architecture of the
machine.

ldap_base (string, default not set)
Specify the base name for LDAP. This often includes LDAP-specific values such as
country and organization.

ldap_cache_maxmem (numeric, default=131072)
Specify the maximum memory Amd should use to cache LDAP entries.

ldap_cache_seconds (numeric, default=0)
Specify the number of seconds to keep entries in the cache.

ldap_hostports (string, default not set)
Specify the LDAP host and port values.

ldap_proto_version (numeric, default=2)
Specify the version of the LDAP protocol to use.

local_domain (string, default no sub-domain)
Same as the -d option to Amd. Specify the local domain name. If this option is
not given the domain name is determined from the hostname, by removing the first
component of the fully-qualified host name.

localhost_address (string, default to localhost or 127.0.0.1)
Specify the name or IP address for Amd to use when connecting the sockets for the
local NFS server and the RPC server. This defaults to 127.0.0.1 or whatever the
host reports as its local address. This parameter is useful on hosts with multiple
addresses where you want to force Amd to connect to a specific address.

log_file (string, default=/dev/stderr)
Same as the -l option to Amd. Specify a file name to log Amd events to. If the
string /dev/stderr is specified, Amd will send its events to the standard error
file descriptor. If the string syslog is given, Amd will record its events with
the system logger syslogd(8). The default syslog facility used is LOG_DAEMON. If
you wish to change it, append its name to the log file name, delimited by a single
colon. For example, if logfile is the string syslog:local7 then Amd will log
messages via syslog(3) using the LOG_LOCAL7 facility (if it exists on the system).

log_options (string, default=defaults)
Same as the -x option to Amd. Specify any logging options for Amd. Options are
comma delimited, and can be preceded by the string "no" to negate their meaning.
The "debug" logging option is only available if am-utils was configured with
--enable-debug. You can get the list of supported debugging and logging options by
running amd -H. Possible values are:

all all messages
defaults default messages (fatal,error,user,warning,info)
debug debug messages
error non-fatal system errors (cannot be turned off)
fatal fatal errors (cannot be turned off)
info information
map map errors
stats additional statistical information
user non-fatal user errors
warn warnings
warning warnings

map_reload_interval (numeric, default=3600)
The number of seconds that Amd will wait before it checks to see if any maps have
changed at their source (NIS servers, LDAP servers, files, etc.). Amd will reload
only those maps that have changed.

nfs_allow_any_interface (string, default=no)
Normally Amd accepts local NFS packets only from 127.0.0.1. If this parameter is
set to "yes" then Amd will accept local NFS packets from any local interface; this
is useful on hosts that may have multiple interfaces where the system is forced to
send all outgoing packets (even those bound to the same host) via an address other
than 127.0.0.1.

nfs_allow_insecure_port (string, default=no)
Normally Amd will refuse requests coming from unprivileged ports (i.e. ports >=
1024 on Unix systems), so that only privileged users and the kernel can send NFS
requests to it. However, some kernels (certain versions of Darwin, MacOS X, and
Linux) have bugs that cause them to use unprivileged ports in certain situations,
which causes Amd to stop dead in its tracks. This parameter allows Amd to operate
normally even on such systems, at the expense of a slight decrease in the security
of its operations. If you see messages like "ignoring request from foo:1234, port
not reserved" in your Amd log, try enabling this parameter and give it another go.

nfs_proto (string, default to trying version tcp then udp)
By default, Amd tries TCP and then UDP. This option forces the overall NFS
protocol used to TCP or UDP. It overrides what is in the Amd maps, and is useful
when Amd is compiled with NFSv3 support that may not be stable. With this option
you can turn off the complete usage of NFSv3 dynamically (without having to
recompile Amd) until such time as NFSv3 support is desired again.

nfs_retransmit_counter (numeric, default=11)
Same as the retransmit part of the -t timeout.retransmit option to Amd. Specifies
the number of NFS retransmissions that the kernel will use to communicate with Amd.

nfs_retransmit_counter_udp (numeric, default=11)
Same as the nfs_retransmit_counter option, but for all UDP mounts only.

nfs_retransmit_counter_tcp (numeric, default=11)
Same as the nfs_retransmit_counter option, but for all TCP mounts only.

nfs_retransmit_counter_toplvl (numeric, default=11)
Same as the nfs_retransmit_counter option, but only for Amd's top-level UDP mounts.

nfs_retry_interval (numeric, default=8)
Same as the timeout part of the -t timeout.retransmit option to Amd. Specifies the
NFS timeout interval, in tenths of seconds, between NFS/RPC retries (for UDP and
TCP). This is the value that the kernel will use to communicate with Amd.

Amd relies on the kernel RPC retransmit mechanism to trigger mount retries. The
values of the nfs_retransmit_counter and the nfs_retry_interval parameters change
the overall retry interval. Too long an interval gives poor interactive response;
too short an interval causes excessive retries.

nfs_retry_interval_udp (numeric, default=8)
Same as the nfs_retry_interval option, but for all UDP mounts only.

nfs_retry_interval_tcp (numeric, default=8)
Same as the nfs_retry_interval option, but for all TCP mounts only.

nfs_retry_interval_toplvl (numeric, default=8)
Same as the nfs_retry_interval option, but only for Amd's top-level UDP mounts.

nfs_vers (numeric, default to trying version 3 then 2)
By default, Amd tries version 3 and then version 2. This option forces the overall
NFS protocol used to version 3 or 2. It overrides what is in the Amd maps, and is
useful when Amd is compiled with NFSv3 support that may not be stable. With this
option you can turn off the complete usage of NFSv3 dynamically (without having to
recompile Amd) until such time as NFSv3 support is desired again.

nis_domain (string, default to local NIS domain name)
Same as the -y option to Amd. Specify an alternative NIS domain from which to
fetch the NIS maps. The default is the system domain name. This option is ignored
if NIS support is not available.

normalize_hostnames (boolean, default=no)
Same as the -n option to Amd. If "yes," then the name refereed to by ${rhost} is
normalized relative to the host database before being used. The effect is to
translate aliases into ``official'' names.

normalize_slashes (boolean, default=yes)

If "yes," then Amd will condense all multiple ``/'' (slash) characters into one and
remove all trailing slashes. If "no," then Amd will not touch strings that may
contain repeated or trailing slashes. The latter is sometimes useful with SMB
mounts, which often require multiple slash characters in pathnames.

os (string, default to compiled in value)
Same as the -O option to Amd. Allows you to override the compiled-in name of the
operating system. Useful when the built-in name is not desired for backward
compatibility reasons. For example, if the build in name is ``sunos5'', you can
override it to ``sos5'', and use older maps which were written with the latter in
mind.

osver (string, default to compiled in value)
Same as the -o option to Amd. Overrides the compiled-in version number of the
operating system. Useful when the built in version is not desired for backward
compatibility reasons. For example, if the build in version is ``2.5.1'', you can
override it to ``5.5.1'', and use older maps that were written with the latter in
mind.

pid_file (string, default=/dev/stdout)
Specify a file to store the process ID of the running daemon into. If not
specified, Amd will print its process id onto the standard output. Useful for
killing Amd after it had run. Note that the PID of a running Amd can also be
retrieved via amq -p. This file is used only if the print_pid option is on.

plock (boolean, default=yes)
Same as the -S option to Amd. If "yes," lock the running executable pages of Amd
into memory. To improve Amd's performance, systems that support the plock(3) or
mlockall(2) call can lock the Amd process into memory. This way there is less
chance it the operating system will schedule, page out, and swap the Amd process as
needed. This improves Amd's performance, at the cost of reserving the memory used
by the Amd process (making it unavailable for other processes).

portmap_program (numeric, default=300019)
Specify an alternate Port-mapper RPC program number, other than the official
number. This is useful when running multiple Amd processes. For example, you can
run another Amd in "test" mode, without affecting the primary Amd process in any
way. For safety reasons, the alternate program numbers that can be specified must
be in the range 300019-300029, inclusive. Amq has an option -P which can be used
to specify an alternate program number of an Amd to contact. In this way, amq can
fully control any number of Amd processes running on the same host.

preferred_amq_port (numeric, default=0)
Specify an alternate Port-mapper RPC port number for Amd's Amq service. This is
used for both UDP and TCP. Setting this value to 0 (or not defining it) will cause
Amd to select an arbitrary port number. Setting the Amq RPC service port to a
specific number is useful in firewalled or NAT'ed environments, where you need to
know which port Amd will listen on.

print_pid (boolean, default=no)
Same as the -p option to Amd. If "yes," Amd will print its process ID upon
starting.

print_version (boolean, default=no)
Same as the -v option to Amd, but the version prints and Amd continues to run. If
"yes," Amd will print its version information string, which includes some
configuration and compilation values.

restart_mounts (boolean, default=no)
Same as the -r option to Amd. If "yes" Amd will scan the mount table to determine
which file systems are currently mounted. Whenever one of these would have been
auto-mounted, Amd inherits it.

show_statfs_entries (boolean), default=no)
If "yes," then all maps which are browsable will also show the number of entries
(keys) they have when "df" runs. (This is accomplished by returning non-zero values
to the statfs(2) system call).

truncate_log (boolean), default=no)
If "yes," then the log file (if it is a regular file), will be truncated upon
startup.

unmount_on_exit (boolean), default=no)
If "yes," then Amd will attempt to unmount all file systems which it knows about.
Normally Amd leaves all (esp. NFS) mounted file systems intact. Note that Amd does
not know about file systems mounted before it starts up, unless the restart_mounts
option or -r flag are used.

use_tcpwrappers (boolean), default=yes)
If "yes," then Amd will use the tcpd/librwap tcpwrappers library (if available) to
control access to Amd via the /etc/hosts.allow and /etc/hosts.deny files.

vendor (string, default to compiled in value)
The name of the vendor of the operating system. Overrides the compiled-in vendor
name. Useful when the compiled-in name is not desired. For example, most Intel
based systems set the vendor name to ``unknown'', but you can set it to ``redhat.''

Parameters applicable to regular map sections
map_name (string, must be specified)
Name of the map where the keys are located.

tag (string, default no tag)
Each map entry in the configuration file can be tagged. If no tag is specified,
that map section will always be processed by Amd. If it is specified, then Amd
will process the map if the -T option was given to Amd, and the value given to that
command-line option matches that in the map section.

EXAMPLES

       Here is a real Amd configuration file I use daily.

       # GLOBAL OPTIONS SECTION
       [ global ]
       normalize_hostnames =    no
       print_pid =              no
       restart_mounts =         yes
       auto_dir =               /n
       log_file =               /var/log/amd
       log_options =            all
       #debug_options =         all
       plock =                  no
       selectors_in_defaults =  yes
       # config.guess picks up "sunos5" and I don't want to edit my maps yet
       os =                     sos5
       # if you print_version after setting up "os," it will show it.
       print_version =          no
       map_type =               file
       search_path =            /etc/amdmaps:/usr/lib/amd:/usr/local/AMD/lib
       browsable_dirs =         yes

       # DEFINE AN AMD MOUNT POINT
       [ /u ]
       map_name =               amd.u

       [ /proj ]
       map_name =               amd.proj

       [ /src ]
       map_name =               amd.src

       [ /misc ]
       map_name =               amd.misc

       [ /import ]
       map_name =               amd.import

       [ /tftpboot/.amd ]
       tag =                    tftpboot
       map_name =               amd.tftpboot

AUTHORS

       Erez Zadok <ezk@cs.sunysb.edu>, Computer Science Department, Stony Brook University, Stony
       Brook, New York, USA.

       Other authors and contributors to am-utils are listed in the AUTHORS file distributed with
       am-utils.

                                          7 August 1997                               AMD.CONF(5)