Ubuntu Manpage: tinyproxy.conf - Tinyproxy HTTP proxy daemon configuration file

Provided by: tinyproxy_1.8.3-3ubuntu1_amd64

NAME

       tinyproxy.conf - Tinyproxy HTTP proxy daemon configuration file

SYNOPSIS

       tinyproxy.conf

DESCRIPTION

tinyproxy(8) reads its configuration file, typically stored in
/etc/tinyproxy/tinyproxy.conf (or passed to Tinyproxy with -c on the command line). This
manpage describes the syntax and contents of the configuration file.

The Tinyproxy configuration file contains key-value pairs, one per line. Lines starting
with # and empty lines are comments and are ignored. Keywords are case-insensitive,
whereas values are case-sensitive. Values may be enclosed in double-quotes (") if they
contain spaces.

The possible keywords and their descriptions are as follows:

User
The user which the Tinyproxy process should run as, after the initial port-binding has
been done as the root user. Either the user name or the UID may be specified.

Group
The group which the Tinyproxy process should run as, after the initial port-binding
has been done as the root user. Either the group name or the GID may be specified.

Port
The port which the Tinyproxy service will listen on. If the port is less than 1024,
you will need to start the Tinyproxy process as the root user.

Listen
By default, Tinyproxy listens for connections on all available interfaces (i.e. it
listens on the wildcard address 0.0.0.0). With this configuration parameter, Tinyproxy
can be told to listen only on one specific address.

Bind
This allows you to specify which address Tinyproxy will bind to for outgoing
connections to web servers or upstream proxies.

BindSame
If this boolean parameter is set to yes, then Tinyproxy will bind the outgoing
connection to the IP address of the incoming connection that triggered the outgoing
request.

Timeout
The maximum number of seconds of inactivity a connection is allowed to have before it
is closed by Tinyproxy.

ErrorFile
This parameter controls which HTML file Tinyproxy returns when a given HTTP error
occurs. It takes two arguments, the error number and the location of the HTML error
file.

DefaultErrorFile
This parameter controls the HTML template file returned when an error occurs for which
no specific error file has been set.

StatHost
This configures the host name or IP address that is treated as the stat host: Whenever
a request for this host is received, Tinyproxy will return an internal statistics page
instead of forwarding the request to that host. The template for this page can be
configured with the StatFile configuration option. The default value of StatHost is
tinyproxy.stats.

StatFile
This configures the HTML file that Tinyproxy sends when a request for the stathost is
received. If this parameter is not set, Tinyproxy returns a hard-coded basic
statistics page. See the STATHOST section in the tinyproxy(8) manual page for details.

Note that the StatFile and the error files configured with ErrorFile and
DefaultErrorFile are template files that can contain a few template variables that
Tinyproxy expands prior to delivery. Examples are "{cause}" for an abbreviated error
description and "{detail}" for a detailed error message. The tinyproxy(8) manual page
contains a description of all template variables.

LogFile
This controls the location of the file to which Tinyproxy writes its debug output.
Alternatively, Tinyproxy can log to syslog — see the Syslog option.

Syslog
When set to On, this option tells Tinyproxy to write its debug messages to syslog
instead of to a log file configured with LogFile. These two options are mutually
exclusive.

LogLevel
Sets the log level. Messages from the set level and above are logged. For example, if
the LogLevel was set to Warning, then all log messages from Warning to Critical would
be output, but Notice and below would be suppressed. Allowed values are:

• Critical (least verbose)

• Error

• Warning

• Notice

• Connect (log connections without Info’s noise)

• Info (most verbose)

PidFile
This option controls the location of the file where the main Tinyproxy process stores
its process ID for signaling purposes.

XTinyproxy
Setting this option to Yes tells Tinyproxy to add a header X-Tinyproxy containing the
client’s IP address to the request.

Upstream, No Upstream
This option allows you to set up a set of rules for deciding whether an upstream proxy
server is to be used, based on the host or domain of the site being accessed. The
rules are stored in the order encountered in the configuration file and the LAST
matching rule wins. There are three possible forms for specifying upstream rules:

• upstream host:port turns proxy upstream support on generally.

• upstream host:port "site_spec" turns on the upstream proxy for the sites matching
site_spec.

• no upstream "site_spec" turns off upstream support for sites matching site_spec.

The site can be specified in various forms as a hostname, domain
name or as an IP range:

• name matches host exactly

• .name matches any host in domain "name"

• . matches any host with no domain (in empty domain)

• IP/bits matches network/mask

• IP/mask matches network/mask

MaxClients
Tinyproxy creates one child process for each connected client. This options specifies
the absolute highest number processes that will be created. With other words, only
MaxClients clients can be connected to Tinyproxy simultaneously.

MinSpareServers, MaxSpareServers
Tinyproxy always keeps a certain number of idle child processes so that it can handle
new incoming client requests quickly. MinSpareServer and MaxSpareServers control the
lower and upper limits for the number of spare processes. I.e. when the number of
spare servers drops below MinSpareServers then Tinyproxy will start forking new spare
processes in the background and when the number of spare processes exceeds
MaxSpareServers then Tinyproxy will kill off extra processes.

StartServers
The number of servers to start initially. This should usually be set to a value
between MinSpareServers and MaxSpareServers.

MaxRequestsPerChild
This limits the number of connections that a child process will handle before it is
killed. The default value is 0 which disables this feature. This option is meant as an
emergency measure in the case of problems with memory leakage. In that case, setting
MaxRequestsPerChild to a value of e.g. 1000, or 10000 can be useful.

Allow, Deny
The Allow and Deny options provide a means to customize which clients are allowed to
access Tinyproxy. Allow and Deny lines can be specified multiple times to build the
access control list for Tinyproxy. The order in the config file is important. If there
are no Allow or Deny lines, then all clients are allowed. Otherwise, the default
action is to deny access. The argument to Allow or Deny can be a single IP address of
a client host, like 127.0.0.1, an IP address range, like 192.168.0.1/24 or a string
that will be matched against the end of the client host name, i.e, this can be a full
host name like host.example.com or a domain name like .example.com or even a top level
domain name like .com.

AddHeader
Configure one or more HTTP request headers to be added to outgoing HTTP requests that
Tinyproxy makes. Note that this option will not work for HTTPS traffic, as Tinyproxy
has no control over what headers are exchanged.

AddHeader "X-My-Header" "Powered by Tinyproxy"

ViaProxyName
RFC 2616 requires proxies to add a Via header to the HTTP requests, but using the real
host name can be a security concern. If the ViaProxyname option is present, then its
string value will be used as the host name in the Via header. Otherwise, the server’s
host name will be used.

DisableViaHeader
When this is set to yes, Tinyproxy does NOT add the Via header to the requests. This
virtually puts Tinyproxy into stealth mode. Note that RFC 2616 requires proxies to set
the Via header, so by enabling this option, you break compliance. Don’t disable the
Via header unless you know what you are doing...

Filter
Tinyproxy supports filtering of web sites based on URLs or domains. This option
specifies the location of the file containing the filter rules, one rule per line.

FilterURLs
If this boolean option is set to Yes or On, filtering is performed for URLs rather
than for domains. The default is to filter based on domains.

FilterExtended
If this boolean option is set to Yes, then extended POSIX regular expressions are used
for matching the filter rules. The default is to use basic POSIX regular expressions.

FilterCaseSensitive
If this boolean option is set to Yes, then the filter rules are matched in a case
sensitive manner. The default is to match case-insensitively.

FilterDefaultDeny
The default filtering policy is to allow everything that is not matched by a filtering
rule. Setting FilterDefaultDeny to Yes changes the policy do deny everything but the
domains or URLs matched by the filtering rules.

Anonymous
If an Anonymous keyword is present, then anonymous proxying is enabled. The headers
listed with Anonymous are allowed through, while all others are denied. If no
Anonymous keyword is present, then all headers are allowed through. You must include
quotes around the headers.

Most sites require cookies to be enabled for them to work correctly, so you will need
to allow cookies through if you access those sites.

Example:

Anonymous "Host"
Anonymous "Authorization"
Anonymous "Cookie"

ConnectPort
This option can be used to specify the ports allowed for the CONNECT method. If no
ConnectPort line is found, then all ports are allowed. To disable CONNECT altogether,
include a single ConnectPort line with a value of 0.

ReversePath
Configure one or more ReversePath directives to enable reverse proxy support. With
reverse proxying it’s possible to make a number of sites appear as if they were part
of a single site.

If you uncomment the following two directives and run Tinyproxy on your own computer
at port 8888, you can access example.com, using http://localhost:8888/example/.

ReversePath "/example/" "http://www.example.com/"

ReverseOnly
When using Tinyproxy as a reverse proxy, it is STRONGLY recommended that the normal
proxy is turned off by setting this boolean option to Yes.

ReverseMagic
Setting this option to Yes, makes Tinyproxy use a cookie to track reverse proxy
mappings. If you need to reverse proxy sites which have absolute links you must use
this option.

ReverseBaseURL
The URL that is used to access this reverse proxy. The URL is used to rewrite HTTP
redirects so that they won’t escape the proxy. If you have a chain of reverse proxies,
you’ll need to put the outermost URL here (the address which the end user types into
his/her browser). If this option is not set then no rewriting of redirects occurs.

BUGS

       To report bugs in Tinyproxy, please visit <https://www.banu.com/tinyproxy/>.

AUTHOR

       Written by the Tinyproxy project team.

COPYRIGHT