Provided by: manpages_3.54-1ubuntu1_all 
NAME
cpuset - confine processes to processor and memory node subsets
DESCRIPTION
The cpuset filesystem is a pseudo-filesystem interface to the kernel cpuset mechanism, which is used to
control the processor placement and memory placement of processes. It is commonly mounted at
/dev/cpuset.
On systems with kernels compiled with built in support for cpusets, all processes are attached to a
cpuset, and cpusets are always present. If a system supports cpusets, then it will have the entry nodev
cpuset in the file /proc/filesystems. By mounting the cpuset filesystem (see the EXAMPLE section below),
the administrator can configure the cpusets on a system to control the processor and memory placement of
processes on that system. By default, if the cpuset configuration on a system is not modified or if the
cpuset filesystem is not even mounted, then the cpuset mechanism, though present, has no affect on the
system's behavior.
A cpuset defines a list of CPUs and memory nodes.
The CPUs of a system include all the logical processing units on which a process can execute, including,
if present, multiple processor cores within a package and Hyper-Threads within a processor core. Memory
nodes include all distinct banks of main memory; small and SMP systems typically have just one memory
node that contains all the system's main memory, while NUMA (non-uniform memory access) systems have
multiple memory nodes.
Cpusets are represented as directories in a hierarchical pseudo-filesystem, where the top directory in
the hierarchy (/dev/cpuset) represents the entire system (all online CPUs and memory nodes) and any
cpuset that is the child (descendant) of another parent cpuset contains a subset of that parent's CPUs
and memory nodes. The directories and files representing cpusets have normal filesystem permissions.
Every process in the system belongs to exactly one cpuset. A process is confined to run only on the CPUs
in the cpuset it belongs to, and to allocate memory only on the memory nodes in that cpuset. When a
process fork(2)s, the child process is placed in the same cpuset as its parent. With sufficient
privilege, a process may be moved from one cpuset to another and the allowed CPUs and memory nodes of an
existing cpuset may be changed.
When the system begins booting, a single cpuset is defined that includes all CPUs and memory nodes on the
system, and all processes are in that cpuset. During the boot process, or later during normal system
operation, other cpusets may be created, as subdirectories of this top cpuset, under the control of the
system administrator, and processes may be placed in these other cpusets.
Cpusets are integrated with the sched_setaffinity(2) scheduling affinity mechanism and the mbind(2) and
set_mempolicy(2) memory-placement mechanisms in the kernel. Neither of these mechanisms let a process
make use of a CPU or memory node that is not allowed by that process's cpuset. If changes to a process's
cpuset placement conflict with these other mechanisms, then cpuset placement is enforced even if it means
overriding these other mechanisms. The kernel accomplishes this overriding by silently restricting the
CPUs and memory nodes requested by these other mechanisms to those allowed by the invoking process's
cpuset. This can result in these other calls returning an error, if for example, such a call ends up
requesting an empty set of CPUs or memory nodes, after that request is restricted to the invoking
process's cpuset.
Typically, a cpuset is used to manage the CPU and memory-node confinement for a set of cooperating
processes such as a batch scheduler job, and these other mechanisms are used to manage the placement of
individual processes or memory regions within that set or job.
FILES
Each directory below /dev/cpuset represents a cpuset and contains a fixed set of pseudo-files describing
the state of that cpuset.
New cpusets are created using the mkdir(2) system call or the mkdir(1) command. The properties of a
cpuset, such as its flags, allowed CPUs and memory nodes, and attached processes, are queried and
modified by reading or writing to the appropriate file in that cpuset's directory, as listed below.
The pseudo-files in each cpuset directory are automatically created when the cpuset is created, as a
result of the mkdir(2) invocation. It is not possible to directly add or remove these pseudo-files.
A cpuset directory that contains no child cpuset directories, and has no attached processes, can be
removed using rmdir(2) or rmdir(1). It is not necessary, or possible, to remove the pseudo-files inside
the directory before removing it.
The pseudo-files in each cpuset directory are small text files that may be read and written using
traditional shell utilities such as cat(1), and echo(1), or from a program by using file I/O library
functions or system calls, such as open(2), read(2), write(2), and close(2).
The pseudo-files in a cpuset directory represent internal kernel state and do not have any persistent
image on disk. Each of these per-cpuset files is listed and described below.
tasks List of the process IDs (PIDs) of the processes in that cpuset. The list is formatted as a series
of ASCII decimal numbers, each followed by a newline. A process may be added to a cpuset
(automatically removing it from the cpuset that previously contained it) by writing its PID to
that cpuset's tasks file (with or without a trailing newline.)
Warning: only one PID may be written to the tasks file at a time. If a string is written that
contains more than one PID, only the first one will be used.
notify_on_release
Flag (0 or 1). If set (1), that cpuset will receive special handling after it is released, that
is, after all processes cease using it (i.e., terminate or are moved to a different cpuset) and
all child cpuset directories have been removed. See the Notify On Release section, below.
cpuset.cpus
List of the physical numbers of the CPUs on which processes in that cpuset are allowed to execute.
See List Format below for a description of the format of cpus.
The CPUs allowed to a cpuset may be changed by writing a new list to its cpus file.
cpuset.cpu_exclusive
Flag (0 or 1). If set (1), the cpuset has exclusive use of its CPUs (no sibling or cousin cpuset
may overlap CPUs). By default this is off (0). Newly created cpusets also initially default this
to off (0).
Two cpusets are sibling cpusets if they share the same parent cpuset in the /dev/cpuset hierarchy.
Two cpusets are cousin cpusets if neither is the ancestor of the other. Regardless of the
cpu_exclusive setting, if one cpuset is the ancestor of another, and if both of these cpusets have
nonempty cpus, then their cpus must overlap, because the cpus of any cpuset are always a subset of
the cpus of its parent cpuset.
cpuset.mems
List of memory nodes on which processes in this cpuset are allowed to allocate memory. See List
Format below for a description of the format of mems.
cpuset.mem_exclusive
Flag (0 or 1). If set (1), the cpuset has exclusive use of its memory nodes (no sibling or cousin
may overlap). Also if set (1), the cpuset is a Hardwall cpuset (see below.) By default this is
off (0). Newly created cpusets also initially default this to off (0).
Regardless of the mem_exclusive setting, if one cpuset is the ancestor of another, then their
memory nodes must overlap, because the memory nodes of any cpuset are always a subset of the
memory nodes of that cpuset's parent cpuset.
cpuset.mem_hardwall (since Linux 2.6.26)
Flag (0 or 1). If set (1), the cpuset is a Hardwall cpuset (see below.) Unlike mem_exclusive,
there is no constraint on whether cpusets marked mem_hardwall may have overlapping memory nodes
with sibling or cousin cpusets. By default this is off (0). Newly created cpusets also initially
default this to off (0).
cpuset.memory_migrate (since Linux 2.6.16)
Flag (0 or 1). If set (1), then memory migration is enabled. By default this is off (0). See
the Memory Migration section, below.
cpuset.memory_pressure (since Linux 2.6.16)
A measure of how much memory pressure the processes in this cpuset are causing. See the Memory
Pressure section, below. Unless memory_pressure_enabled is enabled, always has value zero (0).
This file is read-only. See the WARNINGS section, below.
cpuset.memory_pressure_enabled (since Linux 2.6.16)
Flag (0 or 1). This file is present only in the root cpuset, normally /dev/cpuset. If set (1),
the memory_pressure calculations are enabled for all cpusets in the system. By default this is
off (0). See the Memory Pressure section, below.
cpuset.memory_spread_page (since Linux 2.6.17)
Flag (0 or 1). If set (1), pages in the kernel page cache (filesystem buffers) are uniformly
spread across the cpuset. By default this is off (0) in the top cpuset, and inherited from the
parent cpuset in newly created cpusets. See the Memory Spread section, below.
cpuset.memory_spread_slab (since Linux 2.6.17)
Flag (0 or 1). If set (1), the kernel slab caches for file I/O (directory and inode structures)
are uniformly spread across the cpuset. By default this is off (0) in the top cpuset, and
inherited from the parent cpuset in newly created cpusets. See the Memory Spread section, below.
cpuset.sched_load_balance (since Linux 2.6.24)
Flag (0 or 1). If set (1, the default) the kernel will automatically load balance processes in
that cpuset over the allowed CPUs in that cpuset. If cleared (0) the kernel will avoid load
balancing processes in this cpuset, unless some other cpuset with overlapping CPUs has its
sched_load_balance flag set. See Scheduler Load Balancing, below, for further details.
cpuset.sched_relax_domain_level (since Linux 2.6.26)
Integer, between -1 and a small positive value. The sched_relax_domain_level controls the width
of the range of CPUs over which the kernel scheduler performs immediate rebalancing of runnable
tasks across CPUs. If sched_load_balance is disabled, then the setting of
sched_relax_domain_level does not matter, as no such load balancing is done. If
sched_load_balance is enabled, then the higher the value of the sched_relax_domain_level, the
wider the range of CPUs over which immediate load balancing is attempted. See Scheduler Relax
Domain Level, below, for further details.
In addition to the above pseudo-files in each directory below /dev/cpuset, each process has a pseudo-
file, /proc/<pid>/cpuset, that displays the path of the process's cpuset directory relative to the root
of the cpuset filesystem.
Also the /proc/<pid>/status file for each process has four added lines, displaying the process's
Cpus_allowed (on which CPUs it may be scheduled) and Mems_allowed (on which memory nodes it may obtain
memory), in the two formats Mask Format and List Format (see below) as shown in the following example:
Cpus_allowed: ffffffff,ffffffff,ffffffff,ffffffff
Cpus_allowed_list: 0-127
Mems_allowed: ffffffff,ffffffff
Mems_allowed_list: 0-63
The "allowed" fields were added in Linux 2.6.24; the "allowed_list" fields were added in Linux 2.6.26.
EXTENDED CAPABILITIES
In addition to controlling which cpus and mems a process is allowed to use, cpusets provide the following
extended capabilities.
Exclusive cpusets
If a cpuset is marked cpu_exclusive or mem_exclusive, no other cpuset, other than a direct ancestor or
descendant, may share any of the same CPUs or memory nodes.
A cpuset that is mem_exclusive restricts kernel allocations for buffer cache pages and other internal
kernel data pages commonly shared by the kernel across multiple users. All cpusets, whether
mem_exclusive or not, restrict allocations of memory for user space. This enables configuring a system
so that several independent jobs can share common kernel data, while isolating each job's user allocation
in its own cpuset. To do this, construct a large mem_exclusive cpuset to hold all the jobs, and
construct child, non-mem_exclusive cpusets for each individual job. Only a small amount of kernel
memory, such as requests from interrupt handlers, is allowed to be placed on memory nodes outside even a
mem_exclusive cpuset.
Hardwall
A cpuset that has mem_exclusive or mem_hardwall set is a hardwall cpuset. A hardwall cpuset restricts
kernel allocations for page, buffer, and other data commonly shared by the kernel across multiple users.
All cpusets, whether hardwall or not, restrict allocations of memory for user space.
This enables configuring a system so that several independent jobs can share common kernel data, such as
filesystem pages, while isolating each job's user allocation in its own cpuset. To do this, construct a
large hardwall cpuset to hold all the jobs, and construct child cpusets for each individual job which are
not hardwall cpusets.
Only a small amount of kernel memory, such as requests from interrupt handlers, is allowed to be taken
outside even a hardwall cpuset.
Notify on release
If the notify_on_release flag is enabled (1) in a cpuset, then whenever the last process in the cpuset
leaves (exits or attaches to some other cpuset) and the last child cpuset of that cpuset is removed, the
kernel will run the command /sbin/cpuset_release_agent, supplying the pathname (relative to the mount
point of the cpuset filesystem) of the abandoned cpuset. This enables automatic removal of abandoned
cpusets.
The default value of notify_on_release in the root cpuset at system boot is disabled (0). The default
value of other cpusets at creation is the current value of their parent's notify_on_release setting.
The command /sbin/cpuset_release_agent is invoked, with the name (/dev/cpuset relative path) of the to-
be-released cpuset in argv[1].
The usual contents of the command /sbin/cpuset_release_agent is simply the shell script:
#!/bin/sh
rmdir /dev/cpuset/$1
As with other flag values below, this flag can be changed by writing an ASCII number 0 or 1 (with
optional trailing newline) into the file, to clear or set the flag, respectively.
Memory pressure
The memory_pressure of a cpuset provides a simple per-cpuset running average of the rate that the
processes in a cpuset are attempting to free up in-use memory on the nodes of the cpuset to satisfy
additional memory requests.
This enables batch managers that are monitoring jobs running in dedicated cpusets to efficiently detect
what level of memory pressure that job is causing.
This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to
terminate or reprioritize jobs that are trying to use more memory than allowed on the nodes assigned
them, and with tightly coupled, long-running, massively parallel scientific computing jobs that will
dramatically fail to meet required performance goals if they start to use more memory than allowed to
them.
This mechanism provides a very economical way for the batch manager to monitor a cpuset for signs of
memory pressure. It's up to the batch manager or other user code to decide what action to take if it
detects signs of memory pressure.
Unless memory pressure calculation is enabled by setting the pseudo-file
/dev/cpuset/cpuset.memory_pressure_enabled, it is not computed for any cpuset, and reads from any
memory_pressure always return zero, as represented by the ASCII string "0\n". See the WARNINGS section,
below.
A per-cpuset, running average is employed for the following reasons:
* Because this meter is per-cpuset rather than per-process or per virtual memory region, the system load
imposed by a batch scheduler monitoring this metric is sharply reduced on large systems, because a
scan of the tasklist can be avoided on each set of queries.
* Because this meter is a running average rather than an accumulating counter, a batch scheduler can
detect memory pressure with a single read, instead of having to read and accumulate results for a
period of time.
* Because this meter is per-cpuset rather than per-process, the batch scheduler can obtain the key
information—memory pressure in a cpuset—with a single read, rather than having to query and accumulate
results over all the (dynamically changing) set of processes in the cpuset.
The memory_pressure of a cpuset is calculated using a per-cpuset simple digital filter that is kept
within the kernel. For each cpuset, this filter tracks the recent rate at which processes attached to
that cpuset enter the kernel direct reclaim code.
The kernel direct reclaim code is entered whenever a process has to satisfy a memory page request by
first finding some other page to repurpose, due to lack of any readily available already free pages.
Dirty filesystem pages are repurposed by first writing them to disk. Unmodified filesystem buffer pages
are repurposed by simply dropping them, though if that page is needed again, it will have to be reread
from disk.
The cpuset.memory_pressure file provides an integer number representing the recent (half-life of 10
seconds) rate of entries to the direct reclaim code caused by any process in the cpuset, in units of
reclaims attempted per second, times 1000.
Memory spread
There are two Boolean flag files per cpuset that control where the kernel allocates pages for the
filesystem buffers and related in-kernel data structures. They are called cpuset.memory_spread_page and
cpuset.memory_spread_slab.
If the per-cpuset Boolean flag file cpuset.memory_spread_page is set, then the kernel will spread the
filesystem buffers (page cache) evenly over all the nodes that the faulting process is allowed to use,
instead of preferring to put those pages on the node where the process is running.
If the per-cpuset Boolean flag file cpuset.memory_spread_slab is set, then the kernel will spread some
filesystem-related slab caches, such as those for inodes and directory entries, evenly over all the nodes
that the faulting process is allowed to use, instead of preferring to put those pages on the node where
the process is running.
The setting of these flags does not affect the data segment (see brk(2)) or stack segment pages of a
process.
By default, both kinds of memory spreading are off and the kernel prefers to allocate memory pages on the
node local to where the requesting process is running. If that node is not allowed by the process's NUMA
memory policy or cpuset configuration or if there are insufficient free memory pages on that node, then
the kernel looks for the nearest node that is allowed and has sufficient free memory.
When new cpusets are created, they inherit the memory spread settings of their parent.
Setting memory spreading causes allocations for the affected page or slab caches to ignore the process's
NUMA memory policy and be spread instead. However, the effect of these changes in memory placement
caused by cpuset-specified memory spreading is hidden from the mbind(2) or set_mempolicy(2) calls. These
two NUMA memory policy calls always appear to behave as if no cpuset-specified memory spreading is in
effect, even if it is. If cpuset memory spreading is subsequently turned off, the NUMA memory policy
most recently specified by these calls is automatically reapplied.
Both cpuset.memory_spread_page and cpuset.memory_spread_slab are Boolean flag files. By default they
contain "0", meaning that the feature is off for that cpuset. If a "1" is written to that file, that
turns the named feature on.
Cpuset-specified memory spreading behaves similarly to what is known (in other contexts) as round-robin
or interleave memory placement.
Cpuset-specified memory spreading can provide substantial performance improvements for jobs that:
a) need to place thread-local data on memory nodes close to the CPUs which are running the threads that
most frequently access that data; but also
b) need to access large filesystem data sets that must to be spread across the several nodes in the job's
cpuset in order to fit.
Without this policy, the memory allocation across the nodes in the job's cpuset can become very uneven,
especially for jobs that might have just a single thread initializing or reading in the data set.
Memory migration
Normally, under the default setting (disabled) of cpuset.memory_migrate, once a page is allocated (given
a physical page of main memory) then that page stays on whatever node it was allocated, so long as it
remains allocated, even if the cpuset's memory-placement policy mems subsequently changes.
When memory migration is enabled in a cpuset, if the mems setting of the cpuset is changed, then any
memory page in use by any process in the cpuset that is on a memory node that is no longer allowed will
be migrated to a memory node that is allowed.
Furthermore, if a process is moved into a cpuset with memory_migrate enabled, any memory pages it uses
that were on memory nodes allowed in its previous cpuset, but which are not allowed in its new cpuset,
will be migrated to a memory node allowed in the new cpuset.
The relative placement of a migrated page within the cpuset is preserved during these migration
operations if possible. For example, if the page was on the second valid node of the prior cpuset, then
the page will be placed on the second valid node of the new cpuset, if possible.
Scheduler load balancing
The kernel scheduler automatically load balances processes. If one CPU is underutilized, the kernel will
look for processes on other more overloaded CPUs and move those processes to the underutilized CPU,
within the constraints of such placement mechanisms as cpusets and sched_setaffinity(2).
The algorithmic cost of load balancing and its impact on key shared kernel data structures such as the
process list increases more than linearly with the number of CPUs being balanced. For example, it costs
more to load balance across one large set of CPUs than it does to balance across two smaller sets of
CPUs, each of half the size of the larger set. (The precise relationship between the number of CPUs
being balanced and the cost of load balancing depends on implementation details of the kernel process
scheduler, which is subject to change over time, as improved kernel scheduler algorithms are
implemented.)
The per-cpuset flag sched_load_balance provides a mechanism to suppress this automatic scheduler load
balancing in cases where it is not needed and suppressing it would have worthwhile performance benefits.
By default, load balancing is done across all CPUs, except those marked isolated using the kernel boot
time "isolcpus=" argument. (See Scheduler Relax Domain Level, below, to change this default.)
This default load balancing across all CPUs is not well suited to the following two situations:
* On large systems, load balancing across many CPUs is expensive. If the system is managed using
cpusets to place independent jobs on separate sets of CPUs, full load balancing is unnecessary.
* Systems supporting real-time on some CPUs need to minimize system overhead on those CPUs, including
avoiding process load balancing if that is not needed.
When the per-cpuset flag sched_load_balance is enabled (the default setting), it requests load balancing
across all the CPUs in that cpuset's allowed CPUs, ensuring that load balancing can move a process (not
otherwise pinned, as by sched_setaffinity(2)) from any CPU in that cpuset to any other.
When the per-cpuset flag sched_load_balance is disabled, then the scheduler will avoid load balancing
across the CPUs in that cpuset, except in so far as is necessary because some overlapping cpuset has
sched_load_balance enabled.
So, for example, if the top cpuset has the flag sched_load_balance enabled, then the scheduler will load
balance across all CPUs, and the setting of the sched_load_balance flag in other cpusets has no effect,
as we're already fully load balancing.
Therefore in the above two situations, the flag sched_load_balance should be disabled in the top cpuset,
and only some of the smaller, child cpusets would have this flag enabled.
When doing this, you don't usually want to leave any unpinned processes in the top cpuset that might use
nontrivial amounts of CPU, as such processes may be artificially constrained to some subset of CPUs,
depending on the particulars of this flag setting in descendant cpusets. Even if such a process could
use spare CPU cycles in some other CPUs, the kernel scheduler might not consider the possibility of load
balancing that process to the underused CPU.
Of course, processes pinned to a particular CPU can be left in a cpuset that disables sched_load_balance
as those processes aren't going anywhere else anyway.
Scheduler relax domain level
The kernel scheduler performs immediate load balancing whenever a CPU becomes free or another task
becomes runnable. This load balancing works to ensure that as many CPUs as possible are usefully
employed running tasks. The kernel also performs periodic load balancing off the software clock
described in time(7). The setting of sched_relax_domain_level applies only to immediate load balancing.
Regardless of the sched_relax_domain_level setting, periodic load balancing is attempted over all CPUs
(unless disabled by turning off sched_load_balance.) In any case, of course, tasks will be scheduled to
run only on CPUs allowed by their cpuset, as modified by sched_setaffinity(2) system calls.
On small systems, such as those with just a few CPUs, immediate load balancing is useful to improve
system interactivity and to minimize wasteful idle CPU cycles. But on large systems, attempting
immediate load balancing across a large number of CPUs can be more costly than it is worth, depending on
the particular performance characteristics of the job mix and the hardware.
The exact meaning of the small integer values of sched_relax_domain_level will depend on internal
implementation details of the kernel scheduler code and on the non-uniform architecture of the hardware.
Both of these will evolve over time and vary by system architecture and kernel version.
As of this writing, when this capability was introduced in Linux 2.6.26, on certain popular
architectures, the positive values of sched_relax_domain_level have the following meanings.
(1) Perform immediate load balancing across Hyper-Thread siblings on the same core.
(2) Perform immediate load balancing across other cores in the same package.
(3) Perform immediate load balancing across other CPUs on the same node or blade.
(4) Perform immediate load balancing across over several (implementation detail) nodes [On NUMA systems].
(5) Perform immediate load balancing across over all CPUs in system [On NUMA systems].
The sched_relax_domain_level value of zero (0) always means don't perform immediate load balancing, hence
that load balancing is done only periodically, not immediately when a CPU becomes available or another
task becomes runnable.
The sched_relax_domain_level value of minus one (-1) always means use the system default value. The
system default value can vary by architecture and kernel version. This system default value can be
changed by kernel boot-time "relax_domain_level=" argument.
In the case of multiple overlapping cpusets which have conflicting sched_relax_domain_level values, then
the highest such value applies to all CPUs in any of the overlapping cpusets. In such cases, the value
minus one (-1) is the lowest value, overridden by any other value, and the value zero (0) is the next
lowest value.
FORMATS
The following formats are used to represent sets of CPUs and memory nodes.
Mask format
The Mask Format is used to represent CPU and memory-node bit masks in the /proc/<pid>/status file.
This format displays each 32-bit word in hexadecimal (using ASCII characters "0" - "9" and "a" - "f");
words are filled with leading zeros, if required. For masks longer than one word, a comma separator is
used between words. Words are displayed in big-endian order, which has the most significant bit first.
The hex digits within a word are also in big-endian order.
The number of 32-bit words displayed is the minimum number needed to display all bits of the bit mask,
based on the size of the bit mask.
Examples of the Mask Format:
00000001 # just bit 0 set
40000000,00000000,00000000 # just bit 94 set
00000001,00000000,00000000 # just bit 64 set
000000ff,00000000 # bits 32-39 set
00000000,000E3862 # 1,5,6,11-13,17-19 set
A mask with bits 0, 1, 2, 4, 8, 16, 32, and 64 set displays as:
00000001,00000001,00010117
The first "1" is for bit 64, the second for bit 32, the third for bit 16, the fourth for bit 8, the fifth
for bit 4, and the "7" is for bits 2, 1, and 0.
List format
The List Format for cpus and mems is a comma-separated list of CPU or memory-node numbers and ranges of
numbers, in ASCII decimal.
Examples of the List Format:
0-4,9 # bits 0, 1, 2, 3, 4, and 9 set
0-2,7,12-14 # bits 0, 1, 2, 7, 12, 13, and 14 set
RULES
The following rules apply to each cpuset:
* Its CPUs and memory nodes must be a (possibly equal) subset of its parent's.
* It can be marked cpu_exclusive only if its parent is.
* It can be marked mem_exclusive only if its parent is.
* If it is cpu_exclusive, its CPUs may not overlap any sibling.
* If it is memory_exclusive, its memory nodes may not overlap any sibling.
PERMISSIONS
The permissions of a cpuset are determined by the permissions of the directories and pseudo-files in the
cpuset filesystem, normally mounted at /dev/cpuset.
For instance, a process can put itself in some other cpuset (than its current one) if it can write the
tasks file for that cpuset. This requires execute permission on the encompassing directories and write
permission on the tasks file.
An additional constraint is applied to requests to place some other process in a cpuset. One process may
not attach another to a cpuset unless it would have permission to send that process a signal (see
kill(2)).
A process may create a child cpuset if it can access and write the parent cpuset directory. It can
modify the CPUs or memory nodes in a cpuset if it can access that cpuset's directory (execute permissions
on the each of the parent directories) and write the corresponding cpus or mems file.
There is one minor difference between the manner in which these permissions are evaluated and the manner
in which normal filesystem operation permissions are evaluated. The kernel interprets relative pathnames
starting at a process's current working directory. Even if one is operating on a cpuset file, relative
pathnames are interpreted relative to the process's current working directory, not relative to the
process's current cpuset. The only ways that cpuset paths relative to a process's current cpuset can be
used are if either the process's current working directory is its cpuset (it first did a cd or chdir(2)
to its cpuset directory beneath /dev/cpuset, which is a bit unusual) or if some user code converts the
relative cpuset path to a full filesystem path.
In theory, this means that user code should specify cpusets using absolute pathnames, which requires
knowing the mount point of the cpuset filesystem (usually, but not necessarily, /dev/cpuset). In
practice, all user level code that this author is aware of simply assumes that if the cpuset filesystem
is mounted, then it is mounted at /dev/cpuset. Furthermore, it is common practice for carefully written
user code to verify the presence of the pseudo-file /dev/cpuset/tasks in order to verify that the cpuset
pseudo-filesystem is currently mounted.
WARNINGS
Enabling memory_pressure
By default, the per-cpuset file cpuset.memory_pressure always contains zero (0). Unless this feature is
enabled by writing "1" to the pseudo-file /dev/cpuset/cpuset.memory_pressure_enabled, the kernel does not
compute per-cpuset memory_pressure.
Using the echo command
When using the echo command at the shell prompt to change the values of cpuset files, beware that the
built-in echo command in some shells does not display an error message if the write(2) system call fails.
For example, if the command:
echo 19 > cpuset.mems
failed because memory node 19 was not allowed (perhaps the current system does not have a memory node
19), then the echo command might not display any error. It is better to use the /bin/echo external
command to change cpuset file settings, as this command will display write(2) errors, as in the example:
/bin/echo 19 > cpuset.mems
/bin/echo: write error: Invalid argument
EXCEPTIONS
Memory placement
Not all allocations of system memory are constrained by cpusets, for the following reasons.
If hot-plug functionality is used to remove all the CPUs that are currently assigned to a cpuset, then
the kernel will automatically update the cpus_allowed of all processes attached to CPUs in that cpuset to
allow all CPUs. When memory hot-plug functionality for removing memory nodes is available, a similar
exception is expected to apply there as well. In general, the kernel prefers to violate cpuset
placement, rather than starving a process that has had all its allowed CPUs or memory nodes taken
offline. User code should reconfigure cpusets to refer only to online CPUs and memory nodes when using
hot-plug to add or remove such resources.
A few kernel-critical, internal memory-allocation requests, marked GFP_ATOMIC, must be satisfied
immediately. The kernel may drop some request or malfunction if one of these allocations fail. If such
a request cannot be satisfied within the current process's cpuset, then we relax the cpuset, and look for
memory anywhere we can find it. It's better to violate the cpuset than stress the kernel.
Allocations of memory requested by kernel drivers while processing an interrupt lack any relevant process
context, and are not confined by cpusets.
Renaming cpusets
You can use the rename(2) system call to rename cpusets. Only simple renaming is supported; that is,
changing the name of a cpuset directory is permitted, but moving a directory into a different directory
is not permitted.
ERRORS
The Linux kernel implementation of cpusets sets errno to specify the reason for a failed system call
affecting cpusets.
The possible errno settings and their meaning when set on a failed cpuset call are as listed below.
E2BIG Attempted a write(2) on a special cpuset file with a length larger than some kernel-determined
upper limit on the length of such writes.
EACCES Attempted to write(2) the process ID (PID) of a process to a cpuset tasks file when one lacks
permission to move that process.
EACCES Attempted to add, using write(2), a CPU or memory node to a cpuset, when that CPU or memory node
was not already in its parent.
EACCES Attempted to set, using write(2), cpuset.cpu_exclusive or cpuset.mem_exclusive on a cpuset whose
parent lacks the same setting.
EACCES Attempted to write(2) a cpuset.memory_pressure file.
EACCES Attempted to create a file in a cpuset directory.
EBUSY Attempted to remove, using rmdir(2), a cpuset with attached processes.
EBUSY Attempted to remove, using rmdir(2), a cpuset with child cpusets.
EBUSY Attempted to remove a CPU or memory node from a cpuset that is also in a child of that cpuset.
EEXIST Attempted to create, using mkdir(2), a cpuset that already exists.
EEXIST Attempted to rename(2) a cpuset to a name that already exists.
EFAULT Attempted to read(2) or write(2) a cpuset file using a buffer that is outside the writing
processes accessible address space.
EINVAL Attempted to change a cpuset, using write(2), in a way that would violate a cpu_exclusive or
mem_exclusive attribute of that cpuset or any of its siblings.
EINVAL Attempted to write(2) an empty cpuset.cpus or cpuset.mems list to a cpuset which has attached
processes or child cpusets.
EINVAL Attempted to write(2) a cpuset.cpus or cpuset.mems list which included a range with the second
number smaller than the first number.
EINVAL Attempted to write(2) a cpuset.cpus or cpuset.mems list which included an invalid character in the
string.
EINVAL Attempted to write(2) a list to a cpuset.cpus file that did not include any online CPUs.
EINVAL Attempted to write(2) a list to a cpuset.mems file that did not include any online memory nodes.
EINVAL Attempted to write(2) a list to a cpuset.mems file that included a node that held no memory.
EIO Attempted to write(2) a string to a cpuset tasks file that does not begin with an ASCII decimal
integer.
EIO Attempted to rename(2) a cpuset into a different directory.
ENAMETOOLONG
Attempted to read(2) a /proc/<pid>/cpuset file for a cpuset path that is longer than the kernel
page size.
ENAMETOOLONG
Attempted to create, using mkdir(2), a cpuset whose base directory name is longer than 255
characters.
ENAMETOOLONG
Attempted to create, using mkdir(2), a cpuset whose full pathname, including the mount point
(typically "/dev/cpuset/") prefix, is longer than 4095 characters.
ENODEV The cpuset was removed by another process at the same time as a write(2) was attempted on one of
the pseudo-files in the cpuset directory.
ENOENT Attempted to create, using mkdir(2), a cpuset in a parent cpuset that doesn't exist.
ENOENT Attempted to access(2) or open(2) a nonexistent file in a cpuset directory.
ENOMEM Insufficient memory is available within the kernel; can occur on a variety of system calls
affecting cpusets, but only if the system is extremely short of memory.
ENOSPC Attempted to write(2) the process ID (PID) of a process to a cpuset tasks file when the cpuset had
an empty cpuset.cpus or empty cpuset.mems setting.
ENOSPC Attempted to write(2) an empty cpuset.cpus or cpuset.mems setting to a cpuset that has tasks
attached.
ENOTDIR
Attempted to rename(2) a nonexistent cpuset.
EPERM Attempted to remove a file from a cpuset directory.
ERANGE Specified a cpuset.cpus or cpuset.mems list to the kernel which included a number too large for
the kernel to set in its bit masks.
ESRCH Attempted to write(2) the process ID (PID) of a nonexistent process to a cpuset tasks file.
VERSIONS
Cpusets appeared in version 2.6.12 of the Linux kernel.
NOTES
Despite its name, the pid parameter is actually a thread ID, and each thread in a threaded group can be
attached to a different cpuset. The value returned from a call to gettid(2) can be passed in the
argument pid.
BUGS
cpuset.memory_pressure cpuset files can be opened for writing, creation, or truncation, but then the
write(2) fails with errno set to EACCES, and the creation and truncation options on open(2) have no
effect.
EXAMPLE
The following examples demonstrate querying and setting cpuset options using shell commands.
Creating and attaching to a cpuset.
To create a new cpuset and attach the current command shell to it, the steps are:
1) mkdir /dev/cpuset (if not already done)
2) mount -t cpuset none /dev/cpuset (if not already done)
3) Create the new cpuset using mkdir(1).
4) Assign CPUs and memory nodes to the new cpuset.
5) Attach the shell to the new cpuset.
For example, the following sequence of commands will set up a cpuset named "Charlie", containing just
CPUs 2 and 3, and memory node 1, and then attach the current shell to that cpuset.
$ mkdir /dev/cpuset
$ mount -t cpuset cpuset /dev/cpuset
$ cd /dev/cpuset
$ mkdir Charlie
$ cd Charlie
$ /bin/echo 2-3 > cpuset.cpus
$ /bin/echo 1 > cpuset.mems
$ /bin/echo $$ > tasks
# The current shell is now running in cpuset Charlie
# The next line should display '/Charlie'
$ cat /proc/self/cpuset
Migrating a job to different memory nodes.
To migrate a job (the set of processes attached to a cpuset) to different CPUs and memory nodes in the
system, including moving the memory pages currently allocated to that job, perform the following steps.
1) Let's say we want to move the job in cpuset alpha (CPUs 4-7 and memory nodes 2-3) to a new cpuset
beta (CPUs 16-19 and memory nodes 8-9).
2) First create the new cpuset beta.
3) Then allow CPUs 16-19 and memory nodes 8-9 in beta.
4) Then enable memory_migration in beta.
5) Then move each process from alpha to beta.
The following sequence of commands accomplishes this.
$ cd /dev/cpuset
$ mkdir beta
$ cd beta
$ /bin/echo 16-19 > cpuset.cpus
$ /bin/echo 8-9 > cpuset.mems
$ /bin/echo 1 > cpuset.memory_migrate
$ while read i; do /bin/echo $i; done < ../alpha/tasks > tasks
The above should move any processes in alpha to beta, and any memory held by these processes on memory
nodes 2-3 to memory nodes 8-9, respectively.
Notice that the last step of the above sequence did not do:
$ cp ../alpha/tasks tasks
The while loop, rather than the seemingly easier use of the cp(1) command, was necessary because only one
process PID at a time may be written to the tasks file.
The same effect (writing one PID at a time) as the while loop can be accomplished more efficiently, in
fewer keystrokes and in syntax that works on any shell, but alas more obscurely, by using the -u
(unbuffered) option of sed(1):
$ sed -un p < ../alpha/tasks > tasks
SEE ALSO
taskset(1), get_mempolicy(2), getcpu(2), mbind(2), sched_getaffinity(2), sched_setaffinity(2),
sched_setscheduler(2), set_mempolicy(2), CPU_SET(3), proc(5), numa(7), migratepages(8), numactl(8)
Documentation/cpusets.txt in the Linux kernel source tree
COLOPHON
This page is part of release 3.54 of the Linux man-pages project. A description of the project, and
information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.