Provided by: cpl-plugin-xsh-doc_2.3.0+dfsg-3_all 
NAME
xsh_2dmap - Creates a wavelength and spatial resampling solution, a clean arc line list
SYNOPSIS
esorex xsh_2dmap [OPTIONS] FILE.sof
DESCRIPTION
This recipe creates a wavelength and spatial resampling solution, a clean arc line list.
a residual map and a wave map.
Input Frames:
Raw Frame (Tag = WAVE_arm)
Arc Line List (Tag = ARC_LINE_LIST_arm)
Order Table (Tag = ORDER_TAB_EDGES_arm)
Master Bias (Tag = MASTER_BIAS_arm)
[poly mode] Wave Solution (Tag = WAVE_TAB_GUESS_arm)
[poly mode] Theoretical Map (Tag = THEO_TAB_MULT_arm)
[physical model mode] model cfg table (Tag = XSH_MOD_CFG_OPT_FMT_arm)
[OPTIONAL] Master Dark (Tag = MASTER_DARK_arm)
[OPTIONAL] Non-linear Bad Pixel Map (Tag = BP_MAP_NL_arm)
[OPTIONAL] Reference Bad Pixel Map (Tag = BP_MAP_RP_arm)
[OPTIONAL] Reference list to monitor line intensity (Tag = ARC_LINE_LIST_INTMON_arm)
Prepare the frames.
For UVB,VIS:
Subtract Master Bias.
Subtract Master Dark.
For NIR:
Subtract ON OFF
Compute Wavelength Solution, clean arc line list, residual table, wave map
Products:
Wavelength table solution, PRO.CATG = WAVE_TAB_2D_arm [poly mode]
A Residual tab, PRO.CATG=WAVE_RESID_TAB_SLIT_arm
A Wavelelength image map, PRO.CATG=WAVE_MAP_arm. [if model-wavemap-compute=TRUE]
A Slit image map, PRO.CATG=SLIT_MAP_NIR [if model-wavemap-compute=TRUE]
A Dispersion solution table, PRO.CATG=DISP_TAB_NIR
An Arc frame in pre format bias subtracted,
PRO.CATG=WAVE_ON_arm
The optimized model cfg frame, PRO.CATG=XSH_MOD_CFG_OPT_2D_arm [if physical model
mode].
OPTIONS
--keep-temp <str>
If ´no´, temporary files are deleted. (str; default: ´no´). The full name of this
option for the EsoRex configuration file is xsh.xsh_2dmap.keep-temp [default = no].
--debug-level <str>
Additional xshooter debug level. One of ´none´, ´low´, ´medium´, ´high´ (str;
default: ´none´). The full name of this option for the EsoRex configuration file is
xsh.xsh_2dmap.debug-level [default = none].
--time-stamp <bool>
Add timestamp to product file name. (bool; default: False). The full name of this
option for the EsoRex configuration file is xsh.xsh_2dmap.time-stamp [default =
False].
--decode-bp <long>
Integer representation of the bits to be considered bad when decoding the bad pixel
mask pixel values. (long; default: 2144337919). The full name of this option for
the EsoRex configuration file is xsh.xsh_2dmap.decode-bp [default = 2144337919].
--pre-overscan-corr <long>
pre-overscan correction.0: no correction1: mean overscan correction2: mean prescan
correction3: (mean pre+mean overscan)/2 correction (long; default: 1). The full
name of this option for the EsoRex configuration file is
xsh.xsh_2dmap.pre-overscan-corr [default = 1].
--detectarclines-fit-win-hsize <long>
Half window size (HWS) in pixels for the line 2D fitting window (total window size
= 2*HWS+1) (long; default: 6). The full name of this option for the EsoRex
configuration file is xsh.xsh_2dmap.detectarclines-fit-win-hsize [default = 6].
--detectarclines-search-win-hsize <long>
Half window size (HWS) in pixels for the line search box around the expected
position (total window size = 2*HWS+1) [bin units] (long; default: 3). The full
name of this option for the EsoRex configuration file is
xsh.xsh_2dmap.detectarclines-search-win-hsize [default = 3].
--detectarclines-running-median-hsize <long>
Half window size in pixels (HWS) for the running median box (long; default: 0). The
full name of this option for the EsoRex configuration file is
xsh.xsh_2dmap.detectarclines-running-median-hsize [default = 0].
--detectarclines-wavesol-deg-lambda <long>
Degree in lambda in the polynomial solution X=f(lambda,order,slit) and
Y=f(lambda,order,slit) (POLY mode) (long; default: 5). The full name of this option
for the EsoRex configuration file is
xsh.xsh_2dmap.detectarclines-wavesol-deg-lambda [default = 5].
--detectarclines-wavesol-deg-order <long>
Degree in order in the polynomial solution X=f(lambda,order,slit) and
Y=f(lambda,order,slit) (POLY mode) (long; default: 4). The full name of this option
for the EsoRex configuration file is xsh.xsh_2dmap.detectarclines-wavesol-deg-order
[default = 4].
--detectarclines-wavesol-deg-slit <long>
Degree in slit in the polynomial solution X=f(lambda,order,slit) and
Y=f(lambda,order,slit) (POLY mode) (long; default: 1). The full name of this option
for the EsoRex configuration file is xsh.xsh_2dmap.detectarclines-wavesol-deg-slit
[default = 1].
--detectarclines-min-sn <float>
Minimum signal-to-noise ratio to filter lines [xsh_predict: UVB,VIS=5,NIR=4;
xsh_2dmap: UVB=3, VIS=6, NIR=10] (float; default: 5.0). The full name of this
option for the EsoRex configuration file is xsh.xsh_2dmap.detectarclines-min-sn
[default = 5.0].
--detectarclines-find-lines-center <str>
Method used to find the center of the lines: gaussian, barycenter. Gaussian method
applies a Gaussian fit to the line. Barycenter method computes the line centroid.
(str; default: ´gaussian´). The full name of this option for the EsoRex
configuration file is xsh.xsh_2dmap.detectarclines-find-lines-center [default =
gaussian].
--detectarclines-clip-sigma <float>
Kappa value in sigma clipping during the polynomial solution fit (POLY mode)
(float; default: 2.0). The full name of this option for the EsoRex configuration
file is xsh.xsh_2dmap.detectarclines-clip-sigma [default = 2.0].
--detectarclines-clip-niter <long>
Number of iterations in sigma clipping during the polynomial solution fit (POLY
mode) (long; default: 0). The full name of this option for the EsoRex configuration
file is xsh.xsh_2dmap.detectarclines-clip-niter [default = 0].
--detectarclines-clip-frac <float>
Minimal fractions of bad pixel allowed in sigma clipping duringthe polynomial
solution fit (POLY mode) (float; default: 0.7). The full name of this option for
the EsoRex configuration file is xsh.xsh_2dmap.detectarclines-clip-frac [default =
0.7].
--dispersol-deg-x <long>
Degree in X in the polynomial dispersion solution lambda=f(X,Y) and slit=f(X,Y)
(long; default: 4). The full name of this option for the EsoRex configuration file
is xsh.xsh_2dmap.dispersol-deg-x [default = 4].
--dispersol-deg-y <long>
Degree in Y in the polynomial dispersion solution lambda=f(X,Y) and slit=f(X,Y)
(long; default: 5). The full name of this option for the EsoRex configuration file
is xsh.xsh_2dmap.dispersol-deg-y [default = 5].
--model-maxit <long>
Number/10 of annealing iterations (physical model mode). (long; default: 500). The
full name of this option for the EsoRex configuration file is
xsh.xsh_2dmap.model-maxit [default = 500].
--model-anneal-factor <float>
Multiplier applied to the automatic parameter ranges (i.e. when scenario!=0). For
routine operations should be 1.0. (physical model mode). (float; default: 1.0). The
full name of this option for the EsoRex configuration file is
xsh.xsh_2dmap.model-anneal-factor [default = 1.0].
--model-scenario <long>
selects preset flag and range combinations appropriate to common scenarios: 0 -
No scenario, input cfg flags and limitsused. 1 - scenario appropriate for the
startuprecipe (large ranges for parameters affecting single ph exposures, dist
coeff fixed) 2 - Like 1, but includes parameters affecting all ph positions 3 -
Scenario for use in fine tuning cfg to match routine single pinhole exposures. All
parameters affecting 1ph exposures except dist coeffs are included and parameter
ranges are small. (For use by predict in 1ph case). 4 - Like 3 but includes
parameters affecting all ph positions (Standard for use by predict in 9ph case and
2dmap). (long; default: 4). The full name of this option for the EsoRex
configuration file is xsh.xsh_2dmap.model-scenario [default = 4].
Note that it is possible to create a configuration file containing these options, along
with suitable default values. Please refer to the details provided by the 'esorex --help'
command.
SEE ALSO
The full documentation for the xsh pipeline can be downloaded as a PDF file using the
following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/xsh/xsh-pipeline-manual-12.1.pdf
An overview over the existing ESO pipelines can be found on the web page
http://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See
http://packages.python.org/python-cpl/index.html for further information.
The other recipes of the xsh pipeline are xsh_cfg_recover(7), xsh_lingain(7),
xsh_geom_ifu(7), xsh_wavecal(7), xsh_scired_slit_nod(7), xsh_respon_slit_nod(7),
xsh_mdark(7), xsh_respon_slit_offset(7), xsh_orderpos(7), xsh_scired_ifu_stare_drl(7),
xsh_scired_ifu_stare(7), xsh_flexcomp(7), xsh_scired_ifu_offset_drl(7),
xsh_util_physmod(7), xsh_respon_slit_stare(7), xsh_mflat(7), xsh_mbias(7), xsh_predict(7),
xsh_scired_ifu_offset(7), xsh_scired_slit_stare(7), xsh_scired_slit_offset(7)
VERSION
xsh_2dmap 2.3.0
AUTHOR
R. Haigron, P. Bristow, D. Bramich, A. Modigliani <amodigli@eso.org>
BUG REPORTS
Please report any problems to amodigli@eso.org. Alternatively, you may send a report to
the ESO User Support Department <usd-help@eso.org>.
LICENSE
This file is part of the X-shooter Instrument Pipeline Copyright (C) 2006 European
Southern Observatory
This program is free software; you can redistribute it and/or modify it under the terms of
the GNU General Public License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program;
if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA