Provided by: faifa_0.2~svn82-1build1_amd64 
NAME
faifa - configure HomePlug 1.0/AV devices
SYNOPSIS
faifa [OPTIONS]
-i specify network interface to use
-m show the menu asking for known MM types
-a destination MAC address to send frames to
-k network key to set
-v be verbose (default: no)
-e set error stream (default: stderr)
-o set output stream (default: stdout)
-s set input stream (default: stdin)
-h show the usage
DESCRIPTION
faifa can configure any Intellon-based PowerLine Communication device using the Intellon
INT5000 and INT6000 HomePlug AV (200Mbits) chips. It supports all Intellon-specific
management and control frames.
MENU COMMANDS
-i specify network interface to use
-m show the menu asking for known MM types
-a destination MAC address to send frames to
-k network key to set
-v be verbose (default: no)
-e set error stream (default: stderr)
-o set output stream (default: stdout)
-s set input stream (default: stdin)
-h show the usage
HomePlug AV protocol
The HomePlug AV protocol was developed by Intellon and specifies how the powerline
PHY layer and HPAV MAC layer can converge to allow Ethernet frames to be sent on
the medium. It handles all the low-level modulation and constellation building plus
the Medium Access Control handling between devices. The HomePlug AV network
topology consists of one coordinator (called CCo) for a given logical HPAV network
(i.e: with the same Network Encryption Key) and none or several stations (called
STAs). Other devices can have a specific role which is a bridge, between several
logical networks.
------------------------------------
| HomePlug PHY |
------------------------------------
| HomePlug MAC convergence layer |
------------------------------------
| Ethernet MAC layer |
------------------------------------
It is possible to configure the HPAV MAC convergence layer by using specific
Ethernet frames with the 0x88e1 Ethertype. Such frames will be interpreted by the
Intellon controller present in the devices and are known as control or management
frames.
Such frames can be either protocol specific (i.e: common to all HPAV
implementations) or vendor specific. There is no convention to specify whether an
HPAV configuration and management frame is vendor specific or not. Most
implementations will share a common format for basic network operations like
setting the Network Management Key or the Encryption Key.
A HomePlug AV management frame is described below :
8 bits 16 bits
---------------------------------------------------
| MM version | MM type |
---------------------------------------------------
| OUI (24 bits) |
---------------------------------------------------
| Payload (var) |
---------------------------------------------------
The payload is highly dependent on the implementation though most vendors will try
to define a common template for it. Such management frame should be encapsulated in
standard ethernet frames with the 0x88e1 ethertype.
Faifa operations
Faifa basically performs 3 main operations :
- send all vendor and protocol specific frames with the corresponding parameters
- dump all vendor and HomePlug 1.0/AV frames with the appropriate frame parsing
- discover the HPAV network topology
The available vendor specific operations are stored in an array of struct
hpav_frame_ops. For each entry the mmtype and the description is specified, with
possible callbacks to handle frame initialization and dump function.
Using the faifa library
Faifa is also provided as shared library (so file) and static library so that you
can link programs with to send HomePlug AV frames. The library allows you,
specifying a given mmtype to send the corresponding HPAV frame to a given device.
Linking with faifa
You should include faifa.h into your C source file and then you can directly call
functions that are provided by the faifa library. When linking with the faifa
library, make sure your linker flags include "-lfaifa" or the absolute path of the
shared object to make sure your program will successfully link.
Sending frames using do_frame
The main function you want to call is do_frame and pass it the MMtype and
destination MAC address you want to send the frame to. This function will :
- lookup the mmtype by reading the array containing available frame operations
- initialize the frame header (MM version, type, source and destination MAC
addresses)
- call the initialisation function (if needed) to let the user input the parameters
(or any other input method)
- calculate the appropriate frame size
- send it to the device
- close the network socket descriptor
This function propagates the return code from the write command on the socket
descriptor.
Receiving frames using do_receive_frame
This function will listen for received frames on the specified interface and will :
- check that the ethertype is set to 0x88e1 otherwise it will discard the frame
- cast the received packet to an HPAV management frame structure
- lookup for the received MM type into the arrays of known response/indications
- call the frame parsing function (based on the mmtype) accordingly
You will probably want to set the network descriptor in reading mode non-blocking.
Faifa uses this function with a call to a pcap_loop method inside a dedicated
thread to receive all frames.
SEE ALSO
ifconfig(8)
AUTHORS
Florian Fainelli <florian@openwrt.org>, Xavier Carcelle <xavier.carcelle@gmail.com>,
Nicolas Thill <nico@openwrt.org>