NAME

       fence_ipmilan - Fence agent for IPMI over LAN

DESCRIPTION

       fence_ipmilan  is an I/O Fencing agent which can be used with machines controlled by IPMI.
       This agent calls support software using ipmitool (http://ipmitool.sf.net/).

       To use fence_ipmilan with HP iLO 3 you have to enable lanplus option (lanplus  /  -P)  and
       increase wait after operation to 4 seconds (power_wait=4 / -T 4)

       fence_ipmilan  accepts  options  on  the  command line as well as from stdin. Fenced sends
       parameters through stdin when it execs the agent. fence_ipmilan can be run by itself  with
       command  line  options.  This is useful for testing and for turning outlets on or off from
       scripts.

PARAMETERS

       -A     IPMI Lan Auth type (md5, password, or none)

       -a     IPMI Lan IP to talk to

       -p     Password (if required) to control power on IPMI device

       -S     Script to retrieve password (if required)

       -P     Use Lanplus

       -l     Username/Login (if required) to control power on IPMI device

       -o     Operation to perform. Valid  operations:  on,  off,  reboot,  status,  list,  diag,
              monitor or metadata (Default Value: reboot)

       -t     Timeout (sec) for IPMI operation

       -C     Ciphersuite to use (same as ipmitool -C parameter)

       -M     Method to fence (onoff or cycle) (Default Value: onoff)

       -T     Wait X seconds after on/off operation (Default Value: 2)

       -f     Wait X seconds before fencing is started

       -v     Verbose mode

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       diag
               The operational behavior of this is not known.

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       monitor
              Check if fencing device is running. List available plugs/virtual  machines  or  get
              status of machine (if it does not support more).

       metadata
               The operational behavior of this is not known.

STDIN PARAMETERS

       auth   IPMI Lan Auth type (md5, password, or none)

       ipaddr IPMI Lan IP to talk to

       passwd Password (if required) to control power on IPMI device

       passwd_script
              Script to retrieve password (if required)

       lanplus
              Use Lanplus

       login  Username/Login (if required) to control power on IPMI device

       action Operation  to  perform.  Valid  operations:  on,  off,  reboot, status, list, diag,
              monitor or metadata (Default Value: reboot)

       timeout
              Timeout (sec) for IPMI operation

       cipher Ciphersuite to use (same as ipmitool -C parameter)

       method Method to fence (onoff or cycle) (Default Value: onoff)

       power_wait
              Wait X seconds after on/off operation (Default Value: 2)

       delay  Wait X seconds before fencing is started

       verbose
              Verbose mode