NAME

       fence_sanbox2 - Fence agent for QLogic SANBox2 FC switches

DESCRIPTION

       fence_sanbox2  is  an I/O Fencing agent which can be used with QLogic SANBox2 FC switches.
       It logs into a SANBox2 switch via telnet and disables a  specified  port.  Disabling   the
       port  which  a  machine  is  connected  to effectively fences that machine. Lengthy telnet
       connections to the switch should be avoided while a GFS cluster  is  running  because  the
       connection will block any necessary fencing actions.

       fence_sanbox2  accepts  options  on  the  command line as well as from stdin. Fenced sends
       parameters through stdin when it execs the agent. fence_sanbox2 can be run by itself  with
       command  line  options.  This is useful for testing and for turning outlets on or off from
       scripts.

       Vendor URL: http://www.qlogic.com

PARAMETERS

       -o, --action=<action>
              Fencing Action (Default Value: disable)

       -a, --ip=<ip>
              IP Address or Hostname This parameter is always required.

       -l, --username=<name>
              Login Name This parameter is always required.

       -p, --password=<password>
              Login password or passphrase

       -S, --password-script=<script>
              Script to retrieve password

       -c, --command-prompt=<prompt>
              Force command prompt (Default Value: [' #> '])

       -n, --plug=<id>
              Physical plug number or name of virtual machine This parameter is always  required.

       -u, --ipport=<port>
              TCP port to use for connection with device

       -v, --verbose
              Verbose mode

       -D, --debug-file=<debugfile>
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       -C, --separator=<char>
              Separator for CSV created by operation list (Default Value: ,)

       --power-timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --shell-timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --login-timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --delay
              Wait X seconds before fencing is started (Default Value: 0)

       --retry-on
              Count of attempts to retry power on (Default Value: 1)

ACTIONS

       enable
               The operational behavior of this is not known.

       disable
               The operational behavior of this is not known.

       status This returns the status of the plug/virtual machine.

       list   List  available  plugs  with  aliases/virtual machines if there is support for more
              then one device. Returns N/A otherwise.

       monitor
              Check if fencing device is running. List available plugs/virtual  machines  or  get
              status of machine (if it does not support more).

       metadata
               The operational behavior of this is not known.

STDIN PARAMETERS

       io_fencing
              Fencing Action (Default Value: disable)

       ipaddr IP Address or Hostname This parameter is always required.

       login  Login Name This parameter is always required.

       passwd Login password or passphrase

       passwd_script
              Script to retrieve password

       cmd_prompt
              Force command prompt (Default Value: [' #> '])

       port   Physical  plug number or name of virtual machine This parameter is always required.

       ipport TCP port to use for connection with device

       verbose
              Verbose mode

       debug  Write debug information to given file

       version
              Display version information and exit

       help   Display help and exit

       separator
              Separator for CSV created by operation list (Default Value: ,)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       delay  Wait X seconds before fencing is started (Default Value: 0)

       retry_on
              Count of attempts to retry power on (Default Value: 1)