NAME

       gpsinit - initialize CAN kernel modules for GPSD

SYNOPSIS

       gpsinit [-n control] [-s speed] module_name [interface_name]

       gpsinit -h

       gpsinit -v

DESCRIPTION

       gpsinit initializes whatever kernel-level modules are needed to enable special non-serial
       hardware to communicate with a gpsd instance. Note: it will need root permissions to load
       modules and perform other special operations, such as changing kernel-interface baudrates.

       At present, all modes of this tool are concerned with setting up kernel-level interfaces
       to hardware on a CAN (Control Area Network) speaking NMEA2000.

       The program accepts the following options:

       -h
           Display a brief help text.

       -v
           Display the version of gpsinit.

       -n
           Set the CAN network number. The default is 0.

       -s
           Set the baudrate to be used to communicate over the serial line to the CAN hardware.
           The default is 38400 baud.

       The parameter module_name is mandatory. The socket CAN driver module module_name.ko will
       be loaded.  gpsinit recognize the following module names:

       plx_pci, esd_usb2, vcan, slcan
           The parameter interface_name and -s speed can used here.

       beaglebone
           The dcan module needed for the beaglebone is part of the Linux kernel, so no module is
           loaded in this case.

       The parameter interface_name is needed for slcan hardware only. It gives the name of the
       serial device to which the SL CAN hardware is connected. The default is /dev/ttyUSB0.

EXAMPLES

       sudo gpsinit plx_pci
           Attempt to load the module plx_pci and initialize net 0 for the connection to a
           NMEA2000 network. It will set the baudrate to 250kBits.

       sudo gpsinit -n 1 plx_pci
           As above, but use net 1.

       sudo gpsinit -s 38400 slcan /dev/ttyUSB0
           Attempt to load the module slcan and talk to the hardware at 38400 baud connected to
           port /dev/ttyUSB0.

       gpsinit -h
           Display a brief help message.

       gpsinit -v
           Display the version of gpsinit.

SEE ALSO

       gpsd(8), gps(1), libgps(3), libgpsd(3).

AUTHOR

       Reinhard Arlt <reinhard.arlt@t-online.de>.